Search

With the development of laser technology, laser-related materials have been widely studied. Both laser stealth coatings and laser protective coatings are currently the focus of attention. However, less research has been done on laser stealth and protective integrated coatings. In this paper, plasma-sprayed Y 2 O 3 –Ti 3 AlC 2 coatings were prepared with low-power (LP) and high-power (HP) parameters, and their laser stealth and laser protection properties were characterized. The LP coating and HP coating appeared to have lower reflectivity at 1064 nm because a low-reflectivity second phase and many loose flocs on the surface are introduced, which indicates excellent laser stealth performance. When irradiated by a laser, the LP coating exhibited excellent laser protection ability, and its reflectivity increased after irradiation because Ti 3 AlC 2 oxidized and decomposed and densely arranged small particles formed on the surface. The LP coating perfectly protected the 500-W laser irradiation for 20 s. In addition, the laser damage threshold of the LP coating was 5.599 s at 1000-W laser irradiation, which indicates that the LP Y 2 O 3 –Ti 3 AlC 2 coating is a potential material with laser stealth and laser protection integration. [ABSTRACT FROM AUTHOR]

High-energy lasers can cause severe damage to conventional materials in an extremely short time. Highly reflective coatings are effective against damage, but they cannot withstand high laser power densities. In this study, a composite coating with two characteristics, namely, reflection and energy consumption, was designed and prepared. TiO 2 and BN powders, as light reflective media, were introduced into a boron-modified phenolic resin (BPF) to prepare an anti-laser composite coating. The results show that the initial reflectivity of the composite coating can reach 78.8% at a wavelength of 1064 nm. After damage-free protection for 0.4 s, ablation occurred in the irradiation region. Owing to the formation of residual char, which is the pyrolysis product of BPF, the coating maintained its protective performance. When the composite coating was irradiated at 1000 W/cm2 for 10 s, the back-surface temperature was 186 °C, which indicates decent anti-laser performance. We also studied the role of BN by setting a control experiment. The high conductivity and energy consumption caused by the evaporation of B 2 O 3 , which is the oxidation product of BN, helped in improving the anti-laser performance. The residual char with high porosity and degree of graphitization proved to be effective to isolate laser energy. This study provides a new design for protection of conventional materials against laser damage. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ablation mechanism of metamaterials under high-energy continuous-wave laser irradiation was for the first time revealed. • The microwave absorption performance of metamaterials under extreme laser damage conditions was firstly deeply investigated. Metamaterials, typically consisting of sub-wavelength metal-atom arrays and a dielectric layer matrix such as glass fiber reinforced epoxy resin (FR-4), have been widely used in the field of stealth equipment due to their good electromagnetic parameter designability and strong absorption for electromagnetic waves at specific frequencies. In offensive and defensive confrontations, laser weapons pose a serious threat to the survival of stealth equipment. However, the interaction mechanism between the metamaterials and laser and the effect of laser ablation on microwave absorption performance are still unclear. In this work, we firstly irradiated the double arc-shaped Cu-atom array/FR-4 matrix metamaterials by using a high-energy continuous-wave laser and studied the interaction and response mechanism between them. The high temperature caused by laser irradiation leads to the melting of the metal atoms and the pyrolysis of the resin matrix. By simulating and testing the reflection loss of the metamaterials before and after irradiation, we found that the resin pyrolysis products strongly affect the impedance matching characteristics and reduce the microwave absorption properties significantly in extreme cases. Our findings help deeply understand the interaction between the metamaterials and the laser and will show guidance in the applications involving laser-metamaterial interactions. [ABSTRACT FROM AUTHOR]