Search

Accurately detecting spine vertebrae plays a crucial role in successful orthopedic surgery. However, identifying and classifying lumbar vertebrae from arbitrary spine X-ray images remains challenging due to their similar appearance and varying sizes among individuals. In this paper, we propose a novel approach to enhance vertebrae detection accuracy by leveraging both global and local spatial relationships between neighboring vertebrae. Our method incorporates a two-stage detector architecture that captures global contextual information using an intermediate heatmap from the first stage. Additionally, we introduce a detection head in the second stage to capture local spatial information, enabling each vertebra to learn neighboring spatial details, visibility, and relative offset. During inference, we employ a fusion strategy that combines spatial offsets of neighboring vertebrae and heatmap from a conventional detection head. This enables the model to better understand relationships and dependencies between neighboring vertebrae. Furthermore, we introduce a new representation of object centers that emphasizes critical regions and strengthens the spatial priors of human spine vertebrae, resulting in an improved detection accuracy. We evaluate our method using two lumbar spine image datasets and achieve promising detection performance. Compared to the baseline, our algorithm achieves a significant improvement of 13.6% AP in the CM dataset and surpasses 6.5% and 4.8% AP in the anterior and lateral views of the BUU dataset, respectively. [ABSTRACT FROM AUTHOR]

In this paper, steel fiber coal gangue concrete is examined for its fire resistance, high strength, and stability, aiming to achieve both green sustainability and resistance to elevated temperatures. We conducted tests on concrete specimens with varying coal gangue aggregate volume replacement rates (0%, 20%, 40%, 60%) and steel fiber volume contents (0%, 0.5%, 1.0%, 1.5%) to assess their post-high-temperature mechanical properties. These tests were performed at five temperature levels: 20 °C, 200 °C, 400 °C, 600 °C, and 800 °C. The focus was on analyzing the residual mechanical properties and constitutive relationship of the steel fiber coal gangue concrete after exposure to high temperatures. The findings indicate that as the temperature rises, the compressive strength, split tensile strength, and modulus of elasticity of the steel fiber coal gangue concrete specimens undergo varying degrees of reduction. However, the peak strain and ultimate strain increase gradually. The incorporation of steel fibers enhances the mechanical properties of the coal gangue concrete, resulting in improvements in the elastic modulus and peak strain, both before and after exposure to high temperatures. Furthermore, the established constitutive relationship for steel fiber coal gangue concrete after high temperatures, derived from calculations and validated with experimental data, provides a more accurate representation of the entire damage process under uniaxial compressive loading at elevated temperatures. [ABSTRACT FROM AUTHOR]

Negative thermal expansion (NTE) ceramics Sm0.85Zn0.15MnO3 (SZMO) and ZrMgMo3O12 (ZMMO) were selected to prepare Sm0.85Zn0.15MnO3-ZrMgMo3O12/Al-20Si (SZMO-ZMMO/Al-20Si) composites using ball milling and vacuum heating-press sintering processes in this study. The synergistic effect of the SZMO and ZMMO NTE ceramic reinforcements on the microstructure, mechanical properties, and coefficient of thermal expansion (CTE) of the composites was investigated. The results show that the processes of ball milling and sintering did not induce the decomposition of SZMO or ZMMO NTE ceramic reinforcements, nor did they promote a reaction between the Al-20Si matrix and SZMO or ZMMO NTE ceramic reinforcements. However, the excessive addition of SZMO and ZMMO NTE ceramics led to their aggregation within the composite. Adding a small amount of SZMO in combination with ZMMO effectively increased hardness and yield strength while reducing CTE in the Al-20Si alloy. The improvement in strength was primarily provided by SZMO, while the inhibition effect on CTE was primarily provided by ZMMO. An evaluation parameter denoted as α was proposed to evaluate the synergy effects of SZMO and ZMMO NTE ceramic reinforcements on the mechanical properties and CTE of the composites. Based on this parameter, among all composites fabricated, adding 2.5 vol% SZMO NTE ceramic and 10 vol% ZMMO NTE ceramic resulted in an optimal balance between CTE and strength for these composites with a compressive yield strength of 349.72 MPa and a CTE of 12.55 × 10−6/K, representing a significant increase in yield strength by 79.20% compared to that of Al-20Si alloy along with a notable reduction in CTE by 26.44%. [ABSTRACT FROM AUTHOR]

Simple Summary: Radiotherapy, a crucial cancer treatment, has evolved significantly over the years. Traditionally, treatment plans were based on initial scans used throughout the treatment course, accounting for changes in the patient's anatomy by additional margins to targets. However, the field has moved towards decreasing margins with the advancement of delivery and targeting accuracy in order to decrease toxicity, and the increasing use of image guidance has illuminated patient anatomical changes such as organ deformation, weight loss, tumor shrinkage, and even biological changes that are unaccounted for by the conventional approach. Adaptive radiotherapy (ART) addresses this by adjusting treatment plans according to these changes. ART can be conducted in two ways: online (adjustments made during treatment sessions) and offline (adjustments made between treatment sessions). Advances in technology, especially in medical imaging (CT, MRI, and PET scans) and artificial intelligence, have made ART more feasible and efficient. ART offers more precise cancer treatment by adapting to changes in the patient's body, leading to better outcomes with fewer side effects. Radiotherapy, a crucial technique in cancer therapy, has traditionally relied on the premise of largely unchanging patient anatomy during the treatment course and encompassing uncertainties by target margins. This review introduces adaptive radiotherapy (ART), a notable innovation that addresses anatomy changes and optimizes the therapeutic ratio. ART utilizes advanced imaging techniques such as CT, MRI, and PET to modify the treatment plan based on observed anatomical changes and even biological changes during the course of treatment. The narrative review provides a comprehensive guide on ART for healthcare professionals and trainees in radiation oncology and anyone else interested in the topic. The incorporation of artificial intelligence in ART has played a crucial role in improving effectiveness, particularly in contour segmentation, treatment planning, and quality assurance. This has expedited the process to render online ART feasible, lowered the burden for radiation oncology practitioners, and enhanced the precision of dynamically personalized treatment. Current technical and clinical progress on ART is discussed in this review, highlighting the ongoing development of imaging technologies and AI and emphasizing their contribution to enhancing the applicability and effectiveness of ART. [ABSTRACT FROM AUTHOR]

Transition metal selenides have garnered considerable attention in the field of electrocatalytic oxygen evolution reaction (OER). However, their OER performances still lag behind those of Ir-based materials due to limited exposed active sites, inefficient electron transfer and inadequate stability. In this study, we have successfully synthesized nitrogen-doped NiSe2 nanosheets, which exhibit high efficiency and long-term stability for the OER, requiring only 320 mV to reach a current density of 10 mA cm−2. The nitrogen doping plays a crucial role in effectively regulating the work function and semiconductor characteristics of NiSe2, which facilitates the electron transport and optimizes the catalytic sites. Furthermore, the NiSe2 nanosheets present a larger surface area with more exposed active sites, thus resulting in exceptional OER catalytic activity. The nitrogen-doped NiSe2 nanosheets also display superior stability, maintaining a sustained current density throughout an 8-h OER operation. [ABSTRACT FROM AUTHOR]

Nickel-based alloys have demonstrated significant promise as structural materials for Gen-IV nuclear reactors. However, the understanding of the interaction mechanism between the defects resulting from displacement cascades and solute hydrogen during irradiation remains limited. This study aims to investigate the interaction between irradiation-induced point defects and solute hydrogen on nickel under diverse conditions using molecular dynamics simulations. In particular, the effects of solute hydrogen concentrations, cascade energies, and temperatures are explored. The results show a pronounced correlation between these defects and hydrogen atoms, which form clusters with varying hydrogen concentrations. With increasing the energy of a primary knock-on atom (PKA), the number of surviving self-interstitial atoms (SIAs) also increases. Notably, at low PKA energies, solute hydrogen atoms impede the clustering and formation of SIAs, while at high energies, they promote such clustering. The impact of low simulation temperatures on defects and hydrogen clustering is relatively minor. High temperature has a more obvious effect on the formation of clusters. This atomistic investigation offers valuable insights into the interaction between hydrogen and defects in irradiated environments, thereby informing material design considerations for next-generation nuclear reactors. [ABSTRACT FROM AUTHOR]

Through formation flying, the distributed spaceborne SAR(synthetic aperture radar) system can increase the number of spatial degree of freedoms (DOFs) and provide flexible multi-baselines for SAR-GMTI (ground moving target indication), which improves the system performance. This paper proposes an a priori knowledge-based adaptive clutter cancellation and moving target detection technique applied to the distributed spaceborne SAR-GMTI systems. Firstly, the adaptive clutter cancellation technique is exploited to suppress the ground clutter. A priori knowledge, such as road network information, is integrated to the adaptive clutter cancellation processor to reduce any moving target steering vector mismatch. Secondly, adaptive matched filter (AMF) and adaptive beamformer orthogonal rejection test (ABORT) are exploited as adaptive detection techniques for moving target detection. Due to the dense road network, the moving target steering vector estimation may be ambiguous for the different position and orientation of the roads. The multiple hypothesis testing (MHT) technique is proposed to detect the moving targets and resolve the potential ambiguities. A scheme is exploited to detect, classify, and relocate the moving targets. Finally, simulation experiments and performance analysis have demonstrated the effectiveness and robustness of the proposed technique. [ABSTRACT FROM AUTHOR]

Coal gangue is the waste created in the coal mining process and can be utilised as a coarse aggregate in construction projects to solve the environmental problems it causes. To study the mechanical properties of steel fibre reinforced coal gangue concrete (SFCGC) columns under eccentric compression, two natural aggregate concrete (NAC) columns and eight SFCGC columns were designed and fabricated for eccentric compression loading tests. The variables involved in the tests include gangue substitution rate (0%, 30%, 50%, 70%), steel fibre volume content (SFVC) (0%, 0.5%, 1%, 1.5%), and eccentricity (0.25, 0.5). The experimental work and theoretical analysis were used to investigate the failure mode, cracking, and ultimate bearing capacity of SFCGC columns. The effects of various variation parameters on the longitudinal strain, concrete strain, transverse displacement, crack width, and bearing capacity were analysed in detail. The digital image correlation (DIC) technique was used to compare with the conventional observation and to analyse the cracking trend of the specimens. The testing results revealed that the damage pattern of SFCGC columns under eccentric compression was similar to that of NAC columns. The eccentricity significantly affected the damage pattern (or bearing capacity) of SFCGC columns. The effect of the coal gangue replacement rate on the lateral displacement corresponding to the ultimate load can be neglected under the same eccentricity. The incorporation of steel fibres effectively inhibited the development of cracks in the columns, with an average increase in crack load and ultimate load of 7.36% and 17.1%. The equations were also established to determine the crack width and bearing capacity of the studied SFCGC columns, and the theoretical predictions agreed with the experimental results. [ABSTRACT FROM AUTHOR]

Steel-fiber-reinforced scoria aggregate concrete (SFSAC), which contains scoria aggregate and steel fiber, was developed to reduce the environmental impacts and improve the energy efficiency of buildings. Experimental studies were performed. The test variables included steel fiber volume contents (0%, 0.5%, 1.0%, and 1.5%), freeze-thaw cycles (0 and 25 times), and temperature (20 °C, 200 °C, 400 °C, 600 °C, and 800 °C). Mass loss, relative dynamic elastic modulus, mechanical properties, and the variation pattern of the complete stress–strain curves were analyzed through rapid freeze-thaw, high-temperature, and mechanical tests. The test results showed that after 25 freeze-thaw cycles and then exposure to high temperatures, the surfaces of SFSAC specimens showed aggregate spalling accompanied by dense cracks. Moreover, the residual mechanical properties of steel-fiber-reinforced natural aggregate concrete (SFNAC) were better than those of natural aggregate concrete (NAC). Although the incorporation of steel fiber cannot significantly improve the anti-freezing performance of SFSAC, it can improve the residual mechanical properties of SFSAC, and the optimal amount of incorporation is 1%, considering the economic cost factors. The stress–strain curves of both SFSAC and SFNAC showed the same trend after freeze-thaw cycles and then high temperatures, i.e., the peak stress decreased, the peak strain increased, and the descending section tended to level off. Finally, based on the concrete damage mechanics theory, considering the role of steel fibers in the uniaxial compression process of scoria aggregate concrete (SAC) and the effect of freeze-thaw and high-temperature tests on the SFSAC, the mechanical damage model and the uniaxial compression stress–strain constitutive model were proposed as being able to highly accurately reflect the overall process damage characteristics of SFSAC after freeze-thaw and then high-temperature tests, and also provided a theoretical basis for the high-temperature resistance assessment of SFSAC structures in cold regions. [ABSTRACT FROM AUTHOR]

Simple Summary: The gastrointestinal tract (GIT) is the largest and most complex endocrine organ; there are numerous endocrine cells in the mucosal layer of gastrointestinal tissue, which can secrete a variety of gastrointestinal hormones that regulate gastrointestinal digestion and absorption. The small alpine mammals, plateau zokor (Eospalax baileyi) and plateau pika (Ochotona curzoniae), live in the unique ecotope with cold, hypoxic environments and short plant-growing seasons, resulting in their differential adaptive digestive strategies for foods. In this study, we compared the distribution pattern of argyrophilic cells and the expression of 5-HT cells, Gas cells, and Glu cells in the GIT of the plateau zokor and plateau pika by using histochemical and immunohistochemical methods. Our results showed that the distribution pattern of endocrine cells in the GIT of plateau zokor and plateau pika not only have specific interspecies differences, but also exhibit parallel adaptation to the alpine environments. In addition, we conclude that the distribution pattern of endocrine cells in the GIT is consistent with the respective animals' diets. Endocrine cells can secrete a variety of gastrointestinal hormones that regulate gastrointestinal digestion and absorption, which, in turn, play an important role in animal growth, metabolism, and acclimation. The small alpine mammals, plateau zokor (Eospalax baileyi) and plateau pika (Ochotona curzoniae), live in a unique ecotope with cold, hypoxic environments and short plant-growing seasons, resulting in differential adaptive digestive strategies for foods. Studying the distribution pattern of endocrine cells in the gastrointestinal tract (GIT) of these two animals can lead to a better understanding of the survival strategies of animals in an alpine environment. In this study, we used histochemical and immunohistochemical methods to compare the distribution pattern of argyrophilic cells and the expression of 5-HT cells, Gas cells, and Glu cells in the GIT of the plateau zokor with those of the plateau pika. The results showed that these endocrine cells we studied were widely distributed in the gastrointestinal organs of both these small mammals, and their morphology and distribution location in the GIT were almost the same. However, there were significant differences in the distribution density of argyrophilic cells between different organs in the GIT. The distribution density of argyrophilic cells in the duodenum, jejunum, ileum, and rectum of plateau zokor was significantly lower than that of plateau pika (p < 0.05) and, in the cecum of plateau zokor, was significantly higher than that of plateau pika (p < 0.001). The positive expression of 5-HT cells in the corpus I, corpus II, and pylorus of the stomach, duodenum, ileum, and rectum of plateau zokor was significantly higher than that of plateau pika (p < 0.01). In addition, the positive expression of Glu cells in the cecum was significantly higher (p < 0.01) and in the duodenum and colon was significantly lower (p < 0.05) in the plateau zokor than in the plateau pika. We conclude that the distribution pattern of endocrine cells in the GIT is consistent with the respective animals' diets, with the plateau zokor feeding on high-fiber roots and plateau pika preferring to intake the aboveground parts of plants with lower fibers. [ABSTRACT FROM AUTHOR]

Nowadays, great efforts have been spent on addressing concerns over energy and environmental crises. Among these efforts, electrocatalysis is widely recognized and studied for its high efficiency and easy processability. As a class of emerging electrocatalysts, metal aerogels (MAs) stand out in the last decade. In virtue of their three-dimensional conductive pathways, their library of catalytically/optically active sites, and their robust network structures, MAs have unique advantages in electrocatalysis. However, due to the short history of MAs, there is insufficient research on them, leaving significant room for material design and performance optimization. This perspective will mainly focus on electrocatalysis with MAs, aiming to summarize the state-of-the-art progress and to guide the on-target design of efficient MAs-based electrocatalysts towards energy- and environment-related applications. [ABSTRACT FROM AUTHOR]

The lack of an efficient and stable electrocatalyst for oxygen evolution reaction (OER) greatly hinders the development of various electrochemical energy conversion and storage techniques. In this study, we report a facile synthesis of FeCoNiCuIr high-entropy alloy nanoparticles (HEA NPs) by a one-step heat-up method. The involvement of glucose made the NPs grow uniformly and increased the valence of Ir. The resulting FeCoNiCuIr NPs exhibit excellent OER performance in alkaline solution, with a low overpotential of 360 mV to achieve a current density of 10 mA cm−2 at a Tafel slope of as low as 70.1 mV dec−1. In addition, high stability has also been observed, which remained at 94.2% of the current density after 10 h constant electrolysis, with a constant current of 10 mA cm−2. The high electrocatalytic activity and stability are ascribed to the cocktail effect and synergistic effect between the constituent elements. Our work holds the potential to be extended to the design and synthesis of high-performance electrocatalysts. [ABSTRACT FROM AUTHOR]

Great changes occurred in the physical and chemical properties of the atmosphere in the North China Plain (NCP) in summer caused by PM2.5 dropping from 58 μg/m3 in 2015 to 36.0 μg/m3 in 2019. In this study, we first applied the WRF-Chem model to quantify the impact of PM2.5 reduction on shortwave radiation reaching the ground (SWDOWN), planetary boundary layer height (PBLH), and the surface concentration of air pollutants (represented by CO). Simulation results obtained an increase of 15.0% in daytime SWDOWN and 9.9% in daytime PBLH, and a decrease of −5.0% in daytime CO concentration. These changes were induced by the varied PM2.5 levels. Moreover, the variation in SWDOWN further led to a rise in the NO2 photolysis rate (JNO2) over this region, by 1.82 × 10−4~1.91 × 10−4 s−1 per year. Afterwards, we employed MCM chemical box model to explore how the JNO2 increase and the precursor decrease (CO, VOCs, and NOx) influenced O3 and HOx radicals. The results revealed that the photolysis rate (J) increase would individually cause a change on daytime surface O3, OH, and HO2 radicals by +9.0%, +18.9%, and +23.7%; the corresponding change induced by the precursor decrease was −2.5%, +1.9%, and −2.3%. At the same time, the integrated impacts of the change in J and precursors cause an increase of +6.3%, +21.1%, and +20.9% for daytime surface O3, OH, and HO2. Generally, the atmospheric oxidation capacity significantly enhanced during summer in NCP due to the PM2.5 dropping in recent years. This research can help understand atmosphere changes caused by PM2.5 reduction comprehensively. [ABSTRACT FROM AUTHOR]

Simple Summary: Raphanus is an important genus of Brassicaceae and has undergone a lengthy evolutionary process. However, the inter- and intraspecific phylogenetic relationships and genetic diversity are not well understood. To elucidate these issues, we SSR-sequenced 939 wild, semi-wild and cultivated accessions, and discovered that Europe was the origin center of radishes with diverse European wild radishes, and Europe, South Asia and East Asia might be three independent domestication centers. There was considerable genetic differentiation within European cultivated radishes. European primitive cultivated radish exhibited gene flow with black radish/oil radish and rat-tail radish. Among Asian cultivated radishes, rat-tail radish was a sister to the clade of Chines big radish (including Japanese wild radish), suggesting that they may share the most recent common ancestry. Japanese wild radish had strong gene exchange with Japanese/Korea big radish, oil radish and rat-tail radish. American wild radish developed from natural hybridization between European wild radish and European small radish. All these demonstrated that European primitive cultivated type, American wild radish and Japanese wild radish might have played indispensable roles in radish evolution. Our study provides new perspectives into the origin, evolution and genetic diversity of Raphanus and facilitates the conservation and exploitation of radish germplasm resources. Raphanus has undergone a lengthy evolutionary process and has rich diversity. However, the inter- and intraspecific phylogenetic relationships and genetic diversity of this genus are not well understood. Through SSR-sequencing and multi-analysis of 939 wild, semi-wild and cultivated accessions, we discovered that the European wild radish (EWR) population is separated from cultivated radishes and has a higher genetic diversity. Frequent intraspecific genetic exchanges occurred in the whole cultivated radish (WCR) population; there was considerable genetic differentiation within the European cultivated radish (ECR) population, which could drive radish diversity formation. Among the ECR subpopulations, European primitive cultivated radishes (EPCRs) with higher genetic diversity are most closely related to the EWR population and exhibit a gene flow with rat-tail radishes (RTRs) and black radishes (BRs)/oil radishes (ORs). Among Asian cultivated radishes (ACRs), Chinese big radishes (CBRs) with a relatively high diversity are furthest from the EWR population, and most Japanese/Korean big radishes (JKBRs) are close to CBR accessions, except for a few old Japanese landraces that are closer to the EPCR. The CBR and JKBR accessions are independent of RTR accessions; however, phylogenetic analysis indicates that the RTR is sister to the clade of CBR (including JWR), which suggests that the RTR may share the most recent common ancestry with CBRs and JWRs. In addition, Japanese wild radishes (JWRs), (namely, R. sativus forma raphanistroides) are mainly scattered between CBRs and EPCRs in PCoA analysis. Moreover, JWRs have a strong gene exchange with the JKBR, OR and RTR subpopulations. American wild radishes (AWRs) are closely related to European wild and cultivated radishes, and have a gene flow with European small radishes (ESRs), suggesting that the AWR developed from natural hybridization between the EWR and the ESR. Overall, this demonstrates that Europe was the origin center of the radish, and that Europe, South Asia and East Asia appear to have been three independent domestication centers. The EPCR, AWR and JWR, as semi-wild populations, might have played indispensable transitional roles in radish evolution. Our study provides new perspectives into the origin, evolution and genetic diversity of Raphanus and facilitates the conservation and exploitation of radish germplasm resources. [ABSTRACT FROM AUTHOR]