Search

There is large distribution of sugarcane growth in south China which is play an important role of sugar industry. Remote sensing technology is used in sugarcane monitoring for large areas. However, the optical satellite data coverage is influenced by the rainy weather especially in the grand growth period of sugarcane. GF-1 WFV has widely swath 800km and short revisit time which is ideal data for this study area. In this paper, the random forest model was chosen to get a precise classification result of sugarcane based on time-series band value and 5 spectral indexes image is 89.73% and the Kappa coefficient is 0.65 which is satisfied the overall extraction of sugarcane for large area is the southern China. Furthermore, the decision tree classification was chosen as a comparative experience research. [ABSTRACT FROM AUTHOR]

This study investigates the application of hyperspectral image space–spectral fusion technology in lithologic classification, using data from China's GF-5 and Europe's Sentinel-2A. The research focuses on the southern region of Tuanjie Peak in the Western Kunlun Range, comparing five space–spectral fusion methods: GSA, SFIM, CNMF, HySure, and NonRegSRNet. To comprehensively evaluate the effectiveness and applicability of these fusion methods, the study conducts a comprehensive assessment from three aspects: evaluation of fusion effects, lithologic classification experiments, and field validation. In the evaluation of fusion effects, the study uses an index analysis and comparison of spectral curves before and after fusion, concluding that the GSA fusion method performs the best. For lithologic classification, the Random Forest (RF) classification method is used, training with both area and point samples. The classification results from area sample training show significantly higher overall accuracy compared to point samples, aligning well with 1:50,000 scale geological maps. In field validation, the study employs on-site verification combined with microscopic identification and comparison of images with actual spectral fusion, finding that the classification results for the five lithologies are essentially consistent with field validation results. The "GSA+RF" method combination established in this paper, based on data from GF-5 and Sentinel-2A satellites, can provide technical support for lithological classification in similar high-altitude regions. [ABSTRACT FROM AUTHOR]

The evaluation of satellite soil moisture is a big challenge owing to the large spatial mismatch between pixel-based satellite soil moisture products and point-based in situ measurements. Upscaling in situ measurements to obtain the "true value" of soil moisture content at the satellite grid/footprint scale can make up for the scale difference and improve the validation. Many existing upscaling methods have strict requirements regarding the spatial distribution and quantity of soil moisture sensors. However, in reality, soil-moisture-monitoring networks are commonly sparse with low sensor density, which increases the difficulty of obtaining accurate upscaled soil moisture data and limits the validation of satellite products. For this reason, this paper proposes a scheme to upscale in situ measurements using five machine learning methods along with Landsat 8 datasets and DEM data to validate the accuracy of a SMAP-enhanced passive soil moisture product for a sparse network on the Qinghai–Tibet Plateau. The proposed scheme realizes the upscaling of in situ soil moisture data to the pixel scale (30 m × 30 m) and then to the coarse grid scale (9 km × 9 km) by using multi-source remote sensing data as the bridge of scale conversion. The long-time SMAP SM products since April 2015 on the Qinghai–Tibet Plateau were validated based on upscaled soil moisture data. The results show that (1) random forest regression performs the best, and the upscaled soil moisture data reflect the region-average soil moisture conditions that can be used for evaluating SMAP data; (2) the SMAP product meets its scientific measurement requirements; and (3) the SMAP product generally underestimates the soil moisture in the study area. [ABSTRACT FROM AUTHOR]

Northeast China plays a pivotal role in producing commodity grains. The precipitation and temperature distribution during the growth season is impacted by geographical and climate factors, rendering the region vulnerable to drought. However, relying on a single index does not reflect the severity and extent of drought in different regions. This research utilised the random forest (RF) model for screening remote sensing indices. Relative soil moisture (RSM) was employed to compare seven commonly used indices: the temperature vegetation dryness index (TVDI), vegetation supply water index (VSWI), vegetation condition index (VCI), temperature condition index (TCI), vegetation health index (VHI), multi-band drought index (MBDI), and normalised difference drought index (NDDI). The effectiveness of these indices for monitoring drought during different developmental stages of spring maize was evaluated. Trend rates were employed to investigate the temporal changes in drought patterns of spring maize from 2003 to 2020, and the Sen + Mann–Kendall test was used to analyse spatial variations. The results showed the following: (1) The seven remote sensing indices could accurately track drought during critical growth stages with the TVDI demonstrating higher applicability than the other six indices. (2) The application periods of two TVDIs with different parameters differed for the drought monitoring of spring maize in different developmental periods. The consistency and accuracy of the normalised difference vegetation index (NDVI)-based TVDI (TVDIN) were 5.77% and 34.62% higher than those of the enhanced vegetation index (EVI)-based TVDI (TVDIE), respectively, in the early stage. In contrast, the TVDIE exhibited 13.46% higher consistency than the TVDIN in the middle stage, and the accuracy was the same. During the later stage, the TVDIE showed significantly higher consistency and accuracy than the TVDIN with consistency increases of 9.61% and 38.64%, respectively. (3) The drought trend in northeast China increased from 2003 to 2020, exhibiting severe spring drought and a weakening of the drought in summer. The southern, southwestern, and northwestern parts of northeast China showed an upward drought trend; the drought-affected areas accounted for 37.91% of the study area. This paper identified the most suitable remote sensing indices for monitoring drought in different developmental stages of spring maize. The results provide a comprehensive understanding of the spatial–temporal patterns of drought during the past 18 years. These findings can be used to develop a dynamic agricultural drought monitoring model to ensure food security. [ABSTRACT FROM AUTHOR]

Mountain areas in China account for 69% of the total land area; however, it is still an urgent that we grasp the special ecological structure of mountain areas and maximize the resource advantages of mountain areas under the principle of maintaining a certain ecological level. In this paper, Landsat 5, Landsat 8 and Sentinel-2A images were used as data sources to monitor and analyze land development and ecological change in Gui 'an in 2010, 2013, 2016, 2019 and 2021, so as to explore ecological maintenance mechanisms. Firstly, random forest classification based on multi-source remote sensing data was used to classify land, and the five phases of land-use change were assessed using quantitative analysis, in order to analyze the mountain region's land-use-change characteristics at different stages of development. The results show that Gui 'an has the "two-stage", rapid-development, rapid-recovery mode. Each stage includes a development-and-expansion period and a construction-and-protection period. In the construction period, ecological recovery construction will be emphasized, and the change intensity and rate of the second stage are lower than that of the first stage. Secondly, using a remote sensing ecological index, vegetation coverage, and a landscape index, an ecological evaluation model of the study area was constructed to analyze changes in the ecological environment and its protection in the process of land development. The ecological maintenance status of the five stages was quantitatively monitored using the analysis methods of difference change and coefficient of variation. The results showed that in the first stage of land development and expansion, the landscape pattern and ecological quality fluctuated greatly, and the proportion of ecological quality of an excellent grade decreased by 28.46%. However, in the second stage, the change slowed down and remained unchanged, and gradually moved to the middle and upper level. The results show that there is a close relationship between ecological maintenance and the land development mode, and new mountain towns can maintain ecological quality and achieve sustainable development through a reasonable land development mode. At the end of this paper, the factors affecting the ecological maintenance capacity of Gui 'an are discussed, providing effective reference material and development models for the development of mountainous areas. [ABSTRACT FROM AUTHOR]

The mining industry production is an important pillar industry in China, while its extensive production activities have led to several ecological and environmental problems. Earth observation technology using high-resolution satellite imagery can help us efficiently obtain information on surface elements, surveying and monitoring various land occupation issues arising from open-pit mining production activities. Conventional pixel-based interpretation methods for high-resolution remote sensing images are restricted by "salt and pepper" noise caused by environmental factors, making it difficult to meet increasing requirements for monitoring accuracy. With the Jingxiang phosphorus mining area in Jingmen Hubei Province as the studied area, this paper uses a multi-scale segmentation algorithm to extract large-scale main characteristic information using a layered mask method based on the hierarchical structure of the image object. The remaining characteristic elements were classified and extracted in combination with the random forest model and characteristic factors to obtain land occupation information related mining industry production, which was compared with the results of the Classification and Regression Tree model. 23 characteristic factors in three aspects were selected, including spectral, geometric and texture characteristics. The methods employed in this study achieved 86% and 0.78 respectively in overall extraction accuracy analysis and the Kappa coefficient analysis, compared to 79% and 0.68 using the conventional method. [ABSTRACT FROM AUTHOR]

The continuous transformation from biodiverse natural forests and mixed-use farms into monoculture rubber plantations may lead to a series of hazards, such as natural forest habitats fragmentation, biodiversity loss, as well as drought and water shortage. Therefore, understanding the spatial distribution of rubber plantations is crucial to regional ecological security and a sustainable economy. However, the spectral characteristics of rubber tree is easily mixed with other vegetation such as natural forests, tea plantations, orchards and shrubs, which brings difficulty and uncertainty to regional scale identification. In this paper, we proposed a classification method combines multi-source phenology characteristics and random forest algorithm. On the basis of optimization of input samples and features, phenological spectrum, brightness, greenness, wetness, fractional vegetation cover, topography and other features of rubber were extracted. Five classification schemes were constructed for comparison, and the one with the highest classification accuracy was used to identify the spatial pattern of rubber plantations in 2014, 2016, 2018 and 2020 in Xishuangbanna. The results show that: (1) the identification results are in consistent with field survey and rubber plantations area generally shows a first increasing and then decreasing trend; (2) the Overall Accuracy (OA) and Kappa coefficient of the proposed method are 90.0% and 0.86, respectively, with a Producer's Accuracy (PA) and User's Accuracy (UA) of 95.2% and 88.8%, respectively; (3) cross-validation was employed to analyze the accuracy evaluation indexes of the identification results: both PA and UA of the rubber plantations stay stable over 85%, with the minimum fluctuation and best stability of UA value. The OA value and Kappa coefficient were stable in the range of 0.88–0.90 and 0.84–0.86, respectively. The method proposed provides reliable results on spatial distribution of rubber, and is potentially transferable to other mountainous areas as a robust approach for rapid monitoring of rubber plantations. [ABSTRACT FROM AUTHOR]

Forest logging detection is important for sustainable forest management. The traditional optical satellite images with visible and near-infrared bands showed the ability to identify intensive timber logging. However, less intensive logging is still difficult to detect with coarse spatial resolution such as Landsat or high spatial resolution in fewer spectral bands. Although more high-resolution remote sensing images containing richer spectral bands can be easily obtained nowadays, the questions of whether they facilitate the detection of logging patterns and which spectral bands are more effective in detecting logging patterns, especially in selective logging, remain unresolved. Therefore, this paper aims to evaluate the combinations of visible, near-infrared, red-edge, and short-wave infrared bands in detecting three different logging intensity patterns, including unlogged (control check, CK), selective logging (SL), and clear-cutting (CC), in north subtropical plantation forests with the random forest algorithm using Sentinel-2 multispectral imagery. This study aims to explore the recognition performance of different combinations of spectral bands (visual (VIS) and near-infrared bands (NIR), VIS, NIR combined with red-edge, VIS, NIR combined with short-wave infrared bands (SWIR), and full-spectrum bands combined with VIS, NIR, red edge and SWIR) and to determine the best spectral variables to be used for identifying logging patterns, especially in SL. The study was conducted in Taizishan in Hubei province, China. A total of 213 subcompartments of different logging patterns were collected and the random forest algorithm was used to classify logging patterns. The results showed that full-spectrum bands which contain the red-edge and short-wave infrared bands improve the ability of conventional optical satellites to monitor forest logging patterns and can achieve an overall accuracy of 85%, especially for SL which can achieve 79% and 64% for precision and recall accuracy, respectively. The red-edge band (698–713 nm, B5 in Sentinel-2), short-wave infrared band (2100–2280 nm, B12 in Sentinel-2), and associated vegetation indices (NBR, NDre2, and NDre1) enhance the sensitivity of the spectral information to logging patterns, especially for the SL pattern, and the precision and recall accuracy can improve by 10% and 6%, respectively. Meanwhile, both clear-cutting and unlogged patterns could be well-classified whether adding a red-edge or SWIR band or both in VIS and NIR bands; the best precision and recall accuracies for clear-cutting were enhanced to 97%, 95% and 81%, 91% for unlogged, respectively. Our results demonstrate that the optical images have the potential ability to detect logging patterns especially for the clear-cutting and unlogged patterns, and the selective logging detection accuracy can be improved by adding red-edge and short-wave infrared spectral bands. [ABSTRACT FROM AUTHOR]

PM2.5 is the key reason for the frequent occurrence of smog; therefore, identifying its key driving factors has far-reaching significance for the prevention and control of air pollution. Based on long-term remote sensing inversion of PM2.5 data, 21 driving factors in the fields of nature and humanities were selected, and the random forest model was applied to study the influencing factors of PM2.5 concentration in the Beijing–Tianjin–Hebei urban agglomeration (BTH) from 2000 to 2016. The results indicate: (1) The main factors affecting PM2.5 concentration not only include natural factors such as sunshine hours (SSH), relative humidity (RHU), elevation (ELE), normalized difference vegetation index (NDVI), wind speed (WIN), average temperature (TEM), daily temperature range (TEMR), and precipitation (PRE), but also human factors such as urbanization rate (URB), total investment in fixed assets (INV), and the number of employees in the secondary industry (INDU); (2) The concentration of PM2.5 changed into an inverted S-shape with the increase in SSH and WIN, and into an S-shape with the increase in RHU, NDVI, TEM, PRS, URB and INV. As for ELE and TEMR, it fluctuated and decreased with the increase in ELE, while it increased and then decreased with the increase in TEMR. However, its change was less pronounced with the increase in PRE and INDU; (3) The influence of natural factors is higher than that of human factors, but the role of human factors has been continuously strengthened in recent years. The adjustment and control of PM2.5 pollution sources from the perspective of human factors will become an effective way to reduce PM2.5 concentrations in the BTH. [ABSTRACT FROM AUTHOR]

Under the strong influence of climate change and human activities, the frequency and intensity of disturbance events in the forest ecosystem both show significant increasing trends. Pine wood nematode (Bursapherenchus xylophilus, PWN) is one of the major alien invasive species in China, which has rapidly infected the forest and spread. In recent years, its tendency has been to spread from south to north, causing serious losses to Pinus and non-Pinus coniferous forests. It is urgent to carry out remote sensing monitoring and prediction of pine wilt disease (PWD). Taking Anhui Province as the study area, we applied ground survey, satellite-borne optical remote sensing imagery and environmental factor statistics, relying on the Google Earth Engine (GEE) platform to build a new vegetation index NDFI based on time-series Landsat images to extract coniferous forest information and used a random forest classification algorithm to build a monitoring model of the PWD infection stage. The results show that the proposed NDFI differentiation threshold classification method can accurately extract the coniferous forest range, with the overall accuracy of 87.75%. The overall accuracy of the PWD monitoring model based on random forest classification reaches 81.67%, and the kappa coefficient is 0.622. High temperature and low humidity are conducive to the survival of PWN, which aggravates the occurrence of PWD. Under the background of global warming, the degree of PWD in Anhui Province has gradually increased, and has transferred from the southwest and south to the middle and northeast. Our results show that PWD monitoring and prediction at a regional scale can be realized by using long time-series multi-source remote sensing data, NDFI index can accurately extract coniferous forest information and grasp disease information in a timely manner, which is crucial for effective monitoring and control of PWD. [ABSTRACT FROM AUTHOR]

Due to the country's rapid economic growth, the problem of air pollution in China is becoming increasingly serious. In order to achieve a win-win situation for the environment and urban development, the government has issued many policies to strengthen environmental protection. PM2.5 is the primary particulate matter in air pollution, so an accurate estimation of PM2.5 distribution is of great significance. Although previous studies have attempted to retrieve PM2.5 using geostatistical or aerosol remote sensing retrieval methods, the current rough resolution and accuracy remain as limitations of such methods. This paper proposes a fine-grained spatiotemporal PM2.5 retrieval method that comprehensively considers various datasets, such as Landsat 8 satellite images, ground monitoring station data, and socio-economic data, to explore the applicability of different machine learning algorithms in PM2.5 retrieval. Six typical algorithms were used to train the multi-dimensional elements in a series of experiments. The characteristics of retrieval accuracy in different scenarios were clarified mainly according to the validation index, R2. The random forest algorithm was shown to have the best numerical and PM2.5-based air-quality-category accuracy, with a cross-validated R2 of 0.86 and a category retrieval accuracy of 0.83, while both maintained excellent retrieval accuracy and achieved a high spatiotemporal resolution. Based on this retrieval model, we evaluated the PM2.5 distribution characteristics and hourly variation in the sample area, as well as the functions of different input variables in the model. The PM2.5 retrieval method proposed in this paper provides a new model for fine-grained PM2.5 concentration estimation to determine the distribution laws of air pollutants and thereby specify more effective measures to realize the high-quality development of the city. [ABSTRACT FROM AUTHOR]

Winter wheat is one of the major cereal crops globally and one of the top three cereal crops in China. The precise forecasting of the yield of winter wheat holds significant importance in the realms of agricultural management and ensuring food security. The use of multi-temporal remote sensing data for crop yield prediction has gained increasing attention. Previous research primarily focused on utilizing remote sensing data from individual or a few growth stages as input parameters or integrated data across the entire growth period. However, a detailed analysis of the impact of different temporal combinations on the accuracy of yield prediction has not been extensively reported. In this study, we optimized the temporal sequence of growth stages using interpolation methods, constructed a yield prediction model incorporating the enhanced vegetation index (EVI) at different growth stages as input parameters, and employed a random forest (RF) algorithm. The results indicated that the RF model utilizing the EVI from all the temporal combinations throughout the growth period as input parameters accurately predicted the winter wheat yield with an R2 of the calibrated dataset exceeding 0.58 and an RMSE less than 1284 kg/ha. Among the 1023 yield models tested in this study with ten different growth stage combinations, the most accurate temporal combination comprised five stages corresponding to the regreening, erecting, jointing, heading, and filling stages, with an R2 of 0.81 and an RMSE of 1250 kg/ha and an NRMSE of 15%. We also observed a significant decrease in estimation accuracy when the number of growth stages was fewer than five and a certain degree of decline when the number exceeded five. Our findings confirmed the optimal number and combination of growth stages for the best yield prediction, providing substantial insights for winter wheat yield forecasting. [ABSTRACT FROM AUTHOR]

Snow plays a crucial role in the global water cycle, providing water to over 20% of the world's population and serving as a vital component for flora, fauna, and climate regulation. Changes in snow patterns due to global warming have far-reaching impacts on water management, agriculture, and other economic sectors such as winter tourism. Additionally, they have implications for environmental stability, prompting migration and cultural shifts in snow-dependent communities. Accurate information on snow and its variables is, thus, essential for both scientific understanding and societal planning. This review explores the potential of remote sensing in monitoring snow water equivalent (SWE) on a large scale, analyzing 164 selected publications from 2000 to 2023. Categorized by methodology and content, the analysis reveals a growing interest in the topic, with a concentration of research in North America and China. Methodologically, there is a shift from passive microwave (PMW) inversion algorithms to artificial intelligence (AI), particularly the Random Forest (RF) and neural network (NN) approaches. A majority of studies integrate PMW data with auxiliary information, focusing thematically on remote sensing and snow research, with limited incorporation into broader environmental contexts. Long-term studies (>30 years) suggest a general decrease in SWE in the Northern Hemisphere, though regional and seasonal variations exist. Finally, the review suggests potential future SWE research directions such as addressing PMW data issues, downsampling for detailed analyses, conducting interdisciplinary studies, and incorporating forecasting to enable more widespread applications. [ABSTRACT FROM AUTHOR]

Ocean satellites provide accurate and precise data across various scales, making them a vital tool for investigating the association between global change and ocean processes. However, low-quality data creates unavoidable gaps in satellite data, diminishing its usefulness and continuity. These deficiencies can be resolved by implementing machine learning techniques as valuable tools. This paper details a new satellite data prediction tool titled "SatelliteFixer". The SatelliteFixer model, utilizing a custom-built random forest structure, can generate dependable data with enhanced temporal-spatial continuity. This model has demonstrated feasibility with diverse satellite data sources and light bands, and outperforms the basic machine learning approach. The juxtaposition of model data with in-situ cruise sampling results allows for widespread analysis of the movement and dispersion of suspended sediment. The above entails the inversion of long-term events and the observation of short-term events, which enables accurate seasonal analysis using continuous data without the influence of uneven data volume distribution and outliers, and is also the first-time satellite data has tracked the entire process of pulsed artificial flooding. SatelliteFixer provides a fresh outlook for detailing the varying trends on consecutive timescales and successional spaces among ocean processes. • A data-driven model for ocean satellite missing data prediction is established based on a specially designed machine learning structure. • The feasibility and availability of model result are demonstrated with MODIS Aqua and GOCI visible light data. • As an example of application, SatelliteFixer data are used with in-situ cruise data to analyze the transportation and distribution of suspended sediment. • SatelliteFixer data enables the accurate seasonal analysis and the first tracking of the entire process on pulsed artificial flooding. [ABSTRACT FROM AUTHOR]

The widespread distribution of karst landforms has led to a shortage of water resources in Southwest China. Understanding the spatiotemporal variations in and driving factors of evapotranspiration (ET) in this area is crucial for understanding and predicting severe water resource shortage. This study conducted trend analysis using meteorological data from 2003 to 2020 as well as remote sensing products such as Penman–Monteith–Leuning equation version 2 (PML-V2) ET. The factors influencing the spatial distribution pattern of average ET were identified using a geographical detector. Partial correlation analysis was performed to characterize the relationships between ET and the factors governing its variations, determined using the random forest model. The results demonstrated the following: (1) The average ET decreased with increasing latitude and altitude, primarily affected by the landform type in terms of longitude and displaying "W"-shaped fluctuations. Overall, the annual ET exhibited a significant (p < 0.05) increasing trend, with 72.63% of its area under the increasing trend. (2) The results of the geographic detector indicated sunshine duration as the strongest explanatory factor of the spatial distribution of ET, followed by enhanced vegetation index (EVI), landform type, precipitation, elevation, slope, and aspect. Instead of an individual factor, the interplay between multiple factors more considerably influenced the spatial distribution pattern of ET. (3) The EVI exhibited an overall increasing trend, with a significant increase over 73.59% of the study area and a positive correlation with ET. Thus, the increase in EVI had the strongest impact on ET in the study area, which was further confirmed by the results of the random forest model for 42.92% of the study area. Thus, the present findings clarify the spatiotemporal variations in and driving factors of ET in Southwest China and can serve as a benchmark for policies aiming to develop and manage water resources in this region. [ABSTRACT FROM AUTHOR]

The North China agro–pastoral zone is a large, ecologically fragile zone in the arid and semi-arid regions. Quantitative remote sensing inversion of soil organic carbon (SOC) in this region can facilitate understanding of the current status of degraded land restoration and provide data support for carbon cycling research in the region. Deep learning (DNN) for SOC inversion has been W.a hot topic over the past decade, but there have been few studies at the regional scale in the arid and semi-arid zones. In this study, a DNN model with five hidden layers and five skip connections was established using 644 spatially distributed SOC samples and Landsat 8 OLI imagery. The model was compared with the random forest algorithm in terms of generalization ability. The main conclusions were as follows: 1. The DNN algorithm can establish a high-precision SOC inversion model (R2 = 0.52, RMSE = 0.7), with 90% of errors concentrated in the range of −2.5 to 2.5 kg·C/m2; 2. the Boruta variable-screening algorithm can effectively improve the model accuracy of the random forest algorithm, but due to the DNN's better ability to mine hidden information in the data, the improvement effect on the DNN model accuracy is limited; 3. the SOC samples in arid and semi-arid areas are highly positively skewed, with a significant impact on the modeling accuracy of DNN, and conversion is required to obtain a model with better generalization ability; and 4. in arid and semi-arid regions, SOC has a weak correlation with vegetation indices but a stronger correlation with temperature, elevation, and aridity. This study established a reliable deep learning model for SOC density in a large arid and semi-arid region, providing a reference and framework for the establishment of SOC inversion models in other regions. [ABSTRACT FROM AUTHOR]

PM2.5 refers to the total mass concentration of tiny particulates in the atmosphere near the surface, obtained by means of in situ observations and satellite remote sensing. Given the highly limited number of ground observation stations of inhomogeneous distribution and an ill-posed remote sensing approach, increasing efforts have been devoted to the application of machine-learning (ML) models to both ground and satellite data. A key satellite-derived parameter, aerosol optical thickness (AOD), has been most commonly used as a proxy of PM2.5, although their correlation is fraught with large uncertainties. A critical question that has been overlooked concerns how much AOD helps to improve the retrieval of PM2.5 relative to its uncertainty incurred concurrently. The question is addressed here by taking advantage of high-density PM2.5 stations in eastern China to evaluate the contributions of AOD, determined as the difference in the accuracy of PM2.5 retrievals with and without AOD for varying densities of PM2.5 stations, using four popular ML models (i.e., Random Forest, Extra-trees, XGBoost, and LightGBM). Our results reveal that as the density of monitoring stations decreases, both the feature importance and permutation importance of satellite AOD demonstrate a consistent upward trend (p < 0.05). Furthermore, the ML models without AOD exhibit faster declines in overall accuracy and predictive ability compared with the models with AOD assessed using the sample-based and station-based (spatial) independent cross-validation approaches. Overall, a 10% reduction in the number of stations results in an increase of 0.7–1.2% and 0.6–1.2% in uncertainty in estimated and predicted accuracies, respectively. These findings attest to the indispensable role of satellite AOD in the PM2.5 retrieval process through ML because it can significantly mitigate the negative impact of the sparse distribution of monitoring sites. This role becomes more important as the number of PM2.5 stations decreases. [ABSTRACT FROM AUTHOR]

Satellite remote sensing of PM 2.5 (fine particulate matter) mass concentration has become one of the most popular atmospheric research aspects, resulting in the development of different models. Among them, the semi-empirical physical approach constructs the transformation relationship between the aerosol optical depth (AOD) and PM 2.5 based on the optical properties of particles, which has strong physical significance. Also, it performs the PM 2.5 retrieval independently of the ground stations. However, due to the complex physical relationship, the physical parameters in the semi-empirical approach are difficult to calculate accurately, resulting in relatively limited accuracy. To achieve the optimization effect, this study proposes a method of embedding machine learning into a semi-physical empirical model (RF-PMRS). Specifically, based on the theory of the physical PM 2.5 remote sensing (PMRS) approach, the complex parameter (VE f , a columnar volume-to-extinction ratio of fine particles) is simulated by the random forest (RF) model. Also, a fine-mode fraction product with higher quality is applied to make up for the insufficient coverage of satellite products. Experiments in North China (35 ∘ –45 ∘ N, 110 ∘ –120 ∘ E) show that the surface PM 2.5 concentration derived by RF-PMRS has an average annual value of 57.92 µ g m -3 vs. the ground value of 60.23 µ g m -3. Compared with the original method, RMSE decreases by 39.95 µ g m -3 , and the relative deviation is reduced by 44.87 %. Moreover, validation at two Aerosol Robotic Network (AERONET) sites presents a time series change closer to the true values, with an R of about 0.80. This study is also a preliminary attempt to combine model-driven and data-driven models, laying the foundation for further atmospheric research on optimization methods. [ABSTRACT FROM AUTHOR]

Farmland is the basis for human survival and development. The phenomenon of cropland abandonment has seriously affected national agricultural production and food security. In this study, remote sensing monitoring of abandoned cropland is carried out based on multisource time series remote sensing data using the Google Earth Engine (GEE) cloud platform. Landsat and Sentinel-2 time series data from 2010–2021 were used to obtain monthly synthetic cloud-free image sets in combination with cropland plot data. The time series farmland probability dataset was generated using the random forest classification method. The LandTrendr algorithm was used to extract and analyse the time series cropland probability dataset. Finally, this study also explored the drivers of change in abandoned cropland in Fujian Province. The results show that (1) the LandTrendr algorithm can effectively extract abandoned farmland and avoid the impact of pseudovariation resulting from non-farmland categories. A total of 87.02% of the abandoned farmland was extracted in 2018; 87.50% of the abandoned farmland was extracted in 2020. (2) The abandoned area in Fujian Province fluctuated after a significant increase in 2012, with the abandoned area exceeding 30 thousand hectares. Since 2017, the abandoned area has decreased to slightly below 30 thousand hectares. (3) The regression results of the factors affecting abandoned cropland in Fujian Province show that the increase in the number of agricultural workers and the improvement in soil organic matter content will significantly reduce the area of abandoned cropland in Fujian Province, while the increase in the rate of urbanization, poor road accessibility, and insufficient irrigation conditions will increase the area of abandoned cropland. The results of this study are useful for conducting surveys of cropland abandonment and obtaining timely and accurate data on cropland abandonment. The results of this study are of great significance for the development of effective measures to stop the abandonment of cropland, and ensure the implementation of food security strategies. [ABSTRACT FROM AUTHOR]

The quantification of grassland above-ground biomass (AGB) and grazing intensity (GI) and their distribution in space is of great significance to grassland management and eco-conservation. Remote-sensing technology is widely applied, but it is difficult to measure accurately when monitoring GI. In this study, the neural network, random forest and statistical function models of the relationship between Landsat NDVI and AGB were constructed by field survey and literature data collection in Inner Mongolia grassland, China. By comparing the accuracy among the three models, we constructed a remote-sensing retrieving model of grass AGB. We also estimated the grassland AGB during the peak growing season (August) for Inner Mongolia. Frequency histograms were then made to identify AGB thresholds under four GI levels (light or ungrazed, moderate grazing, overgrazing and extreme grazing) for each of three grassland types (meadow steppe, typical steppe and desert steppe). This study shows that the random forest model simulates grass AGB more accurately than other models. The spatial distribution of AGB in Inner Mongolia grasslands showed a tendency of decreasing from southeast to northwest, with an increasing trend in the last 10 years. The four GI levels in 2021 accounted for 18%, 25%, 36% and 21% of the grasslands in Inner Mongolia, respectively, and over the last 10 years the GI first improved and then deteriorated. This study provides a guideline to remote monitoring for grassland AGB and GI, and supplies scientific support for sustainable management and grassland restoration of large-scale grasslands. [ABSTRACT FROM AUTHOR]

[Display omitted] • Soil salinity can be well reflected by vegetation and salinity indicators. • The conversion of spectral indicators can effectively reduce the upscaling error. • Precise land regionalization will improve the accuracy of scale conversion. • The risk of soil salinization gradually decreases from coastal to inland. • Soil salinization experienced a change of increasing first and then decreasing. As a global problem of soil degradation, salinization has become a major obstacle to the sustainable development of the ecological environment and agriculture in coastal plains. However, the traditional process of salinity survey is too cumbersome, expensive and time-consuming to meet the mapping needs in a large scale. Remote sensing technology has become an important tool for digital soil mapping because of its rich sources, real-time and low cost. In order to meet the objective demand for rapid, accurate, and efficient acquisition and monitoring of soil salinization. This paper collected 61 soil samples from the Kenli District (experimental area) and extracted vegetation and salinity indicators from the Landsat image to construct the salinity inversion model by random forest algorithm. Then, taking the Yellow River Delta as the study area, the conversion coefficient of spectral indicators between Landsat and MODIS images was constructed in the form of the ratio of the mean value. Through optimization, the upscaling conversion method based on land use regionalization was proposed to realize the upscaling inversion and dynamic monitoring of soil salinization. The results showed that: (1) The random forest model based on NDVI , RVI , EVI , SI3 , and SI5 can better predict the soil salinity in the experimental area, with R2 = 0.821 and RMSE = 2.811 (validation accuracy). (2) The upscaling conversion method based on land use regionalization can effectively reduce the statistical error and collinearity of spectral indicators constructed by MODIS images and improve their correlation with OLI data and soil salinity. (3) From coastal to inland, soil salinization gradually decreases in the Yellow River Delta. From 2000 to 2020, soil salinization increased first and then decreased, and the salinized soil accounted for 20.35%∼35.10%. This study used multi-source remote sensing data to realize the collaborative inversion at different scales, which was significant for the quantitative estimation of soil salinity, salinization control, and sustainable agricultural development in coastal plains. [ABSTRACT FROM AUTHOR]

Tsunamis can cause high numbers of casualties, as well as direct and indirect economic losses to coastal regions. The huge destructiveness of tsunamis requires us to study tsunami risk and its temporal change. We adopt the tsunami scenarios of the Ryukyu Trench as an example to analyze the temporal change in tsunami risk. According to the tsunami numerical model results, the tsunami inundation in the worst tsunami scenario covered an area of 82.83 km2. Satellite data including Landsat 8 images from July 2013 and Landsat 9 images from March 2022 were used with the random forest (RF) method to analyze land use and tsunami vulnerability in 2013 and 2022. The tsunami risk and its temporal change were analyzed by integrating tsunami hazard and tsunami vulnerability. The tsunami risk change analysis results show that the area of tsunami risk level 1 increased by 4.57 km2, and the area of tsunami risk level 4 decreased by 7.31 km2. By analyzing changes in land use and land cover (LULC) and tsunami risk, we concluded that the expansion of constructed land and the increase in coastal population were responsible for the increase in tsunami risk. The results of tsunami risk change analysis will help us understand the current tsunami risk and predict possible future risk change. In addition, it is necessary to prepare tsunami prevention measures in advance and produce tsunami emergency response plans for Qidong County and other regions under potential tsunami threat. [ABSTRACT FROM AUTHOR]

This study compares the capability of Landsat-8, Sentinel-2, and ASTER multispectral data in mapping lithological units in the Bukadaban Peak, China, by evaluating the performance of the Random Forest (RF) classifier. Moreover, the study assesses the importance of remote sensing original bands and the bands derived from enhancement techniques such as Principal Component Analysis (PCA) and Minimum Noise Fraction (MNF) to the classification process. Results revealed that RF selected PC8, PC9, PC12, and MNF1 as the most important features in the Sentinel-2 dataset. Several MNF bands of ASTER were more important than the original and PC bands. The original bands were the strongest predictors in Landsat-8 dataset, while PC2, PC5, and MNF5 were relatively significant. Sentinal-2 and ASTER datasets achieved very similar classification accuracy but outperformed Landsat-8 dataset. ASTER dataset yielded the highest overall accuracy 81.8%, which is 0.18% higher than Sentinel-2 and 3.86% higher than Landsat-8. [ABSTRACT FROM AUTHOR]

Accurately and precisely grasping the spatial distribution and changing trends of China's regional population is of great significance in new urbanization, economic development, public health, disaster assessment, and ecological environmental protection. To monitor and evaluate the long-term spatiotemporal characteristics of the population distribution in China, a population monitoring estimation model was proposed. Based on remote sensing data such as nighttime light (NTL) images, land use data, and data from the fifth, sixth, and seventh censuses of China, the population spatiotemporal distribution in China from 2000 to 2020 was analyzed with a random forest algorithm. This study obtained spatial distribution maps of population density at a 1 km x 1 km resolution in 2000, 2010, and 2020. The results revealed the trend of the spatiotemporal pattern of population change from 2000 to 2020. It shows that: the accuracy assessment using the 2020 census population of townships/streets as a reference shows an R2 of 0.67 and a mean relative error (MRE) of 0.44. The spatial pattern of the population in 2000 and 2010 is generally unchanged. In 2020, population agglomeration is evident in the east, with a slight increase in the proportion of the population in the west. The patterns of population agglomeration and urbanization also change over time. The population spatiotemporal distribution obtained in this study can provide a scientific reference for urban sustainable development and promote the rational allocation of urban resources. [ABSTRACT FROM AUTHOR]

Mapping the distribution of bamboo species is vital for the sustainable management of bamboo and for assessing its ecological and socioeconomic value. However, the spectral similarity between bamboo species makes this work extremely challenging through remote sensing technology. Existing related studies rarely integrate multiple feature variables and consider how to quantify the main factors affecting classification. Therefore, feature variables, such as spectra, topography, texture, and vegetation indices, were used to construct the XGBoost model to identify bamboo species using the Zhuhai-1 Orbita hyperspectral (OHS) imagery in the Southern Sichuan Bamboo Sea and its surrounding areas in Sichuan Province, China. The random forest and Spearman's rank correlation analysis were used to sort the main variables that affect classification accuracy and minimize the effects of multicollinearity among variables. The main findings were: (1) The XGBoost model achieved accurate and reliable classification results. The XGBoost model had a higher overall accuracy (80.6%), kappa coefficient (0.708), and mean F1-score (0.805) than the spectral angle mapper (SAM) method; (2) The optimal feature variables that were important and uncorrelated for classification accuracy included the blue band (B1, 464–468 nm), near-infrared band (B27, 861–871 nm), green band (B5, 534–539 nm), elevation, texture feature mean, green band (B4, 517–523 nm), and red edge band (B17, 711–720 nm); and (3) the XGBoost model based on the optimal feature variable selection showed good adaptability to land classification and had better classification performance. Moreover, the mean F1-score indicated that the model could well balance the user's and producer's accuracy. Additionally, our study demonstrated that OHS imagery has great potential for land cover classification and that combining multiple features to enhance classification is an approach worth exploring. Our study provides a methodological reference for the application of OHS images for plant species identification. [ABSTRACT FROM AUTHOR]

To explore the fast, accurate, and efficient remote sensing identification method of cultivated land quality, this study took Shandong Province as the study area, and used measured data to carry out the soil quality evaluation based on conventional GIS. On this basis, MODIS sequence images were used as remote sensing data sources, and multi-source data such as topography, meteorology, and statistical yearbook were fused. Then, according to the Pressure-State-Response framework, we constructed three kinds of characteristic indicators through distinguishing crop rotation types and fusing remote sensing data. Finally, the soil quality grade was identified by the random forest method, and the accuracy analysis was carried out. The results showed that the NDVI peak values of double-season crops are in mid-April and mid-August, and one-season crops are in mid-August. Through evaluation, soil quality was divided into three categories, with six grades. Through principal component analysis, each soil status indicator contains two to three principal components, and each principal component contains five to eight temporal crop remote sensing information. After distinguishing crop rotation types and fusing remote sensing images, the identification accuracy of soil quality is significantly improved. The overall accuracy is 79.18%, 86.12%, and 93.65%, and the Kappa coefficient is 0.66, 0.77, and 0.90, respectively. This research developed an automatic identification method for cultivated land quality grade, and it proved that distinguishing crop rotation types and fusing multi-temporal crop remote sensing information are effective ways to improve identification accuracy. [ABSTRACT FROM AUTHOR]

Drought is an event of shortages in the water supply, whether atmospheric, surface water or ground water. Prolonged droughts have negative impacts on ecosystems, agriculture, society, and the economy. Although existing drought index products are widely utilized in drought monitoring, the coarse spatial resolution greatly limits their applications on regional or local scales. Machine learning driven by remote sensing observations offers an opportunity to monitor regional scale droughts. However, the limited time range of remote sensing observations such as vegetation index (VI) resulted in a substantial gap in generating high resolution drought index products before 2000. This study generated spatiotemporally continuous Standardized Precipitation Evapotranspiration Index (SPEI) data spanning from 1901–2018 in southwestern China by machine learning. It indicated that four Classification and Regression Tree (CART) approaches, decision trees (DT), random forest (RF), gradient boosted regression trees (GBRT) and extra trees (ET), can provide valid local drought information by downscaling the Estación Experimental de Aula Dei (EEAD) data. The in-situ SPEI dataset produced by the Penman–Monteith method was used as a benchmark to evaluate the temporal and spatial performance of the downscaled SPEI. In addition, the necessity of VI in SPEI downscaling was also assessed. The results showed that: (1) the ET-based product has the best performance (R2 = 0.889, MAE = 0.232, RMSE = 0.432); (2) the VI provides no significant improvement for SPEI re-construction; (3) topography exerts an obvious influence on the downscaling process, and (4) the downscaled SPEI shows more consistency with the in-situ SPEI compared with EEAD SPEI. The proposed method can be easily extended to other areas without in-situ data and enhance the ability of long-term drought monitoring. [ABSTRACT FROM AUTHOR]

Reliable and fine-resolution electric power consumption (EPC) is essential for effective urban electricity allocation and planning. Currently, EPC data exists mainly as statistics with low resolution. Many studies estimate fine-resolution EPC based on the positive correction between stable nighttime light and EPC distribution. However, EPC is related to various factors other than nighttime light and is spatially non-stationary. Yet this has been ignored in current research. This study developed a novel method to estimate EPC at 500 m resolution by considering spatially non-stationary through fusing geospatial data and high-resolution satellite images. Deep transfer learning and statistical methods were used to extract socio-economic, population density, and landscape features to describe EPC distribution from multi-source geospatial data. Finally, a random forest regression (RFR) model with features and EPC statistics is established to estimate fine-resolution EPC. A study area of Shenzhen city, China, is employed to evaluate the proposed method. The R 2 between predicted EPC and statistical EPC is 0.82 at sub-district level in 2013, which is higher than an existing EPC product (Shi's product) with R 2 = 0.46 , illustrating the effectiveness of the proposed method. Moreover, the EPC distribution for Shenzhen from 2013 to 2019 was estimated. Furthermore, the spatiotemporal dynamic of EPC was analyzed at the pixel and sub-district levels. [ABSTRACT FROM AUTHOR]

Pine wood nematode (PWN), Bursaphelenchus xyophilus, originating from North America, has caused great ecological and economic hazards to pine trees worldwide, especially affecting the coniferous forests and mixed forests of masson pine in subtropical regions of China. In order to prevent PWN disease expansion, the risk level and susceptivity of PWN outbreaks need to be predicted in advance. For this purpose, we established a prediction model to estimate the susceptibility and risk level of PWN with vegetation condition variables, anthropogenic activity variables, and topographic feature variables across a large-scale district. The study was conducted in Dangyang City, Hubei Province in China, which was located in a subtropical zone. Based on the location of PWN points derived from airborne imagery and ground survey in 2018, the predictor variables were conducted with remote sensing and geographical information system (GIS) data, which contained vegetation indices including normalized difference vegetation index (NDVI), normalized difference moisture index (NDMI), normalized burn ratio (NBR), and normalized red edge index (NDRE) from Sentinel-2 imagery in the previous year (2107), the distance to different level roads which indicated anthropogenic activity, topographic variables in including elevation, slope, and aspect. We compared the fitting effects of different machine learning algorithms such as random forest (RF), K-neighborhood (KNN), support vector machines (SVM), and artificial neural networks (ANN) and predicted the probability of the presence of PWN disease in the region. In addition, we classified PWN points to different risk levels based on the density distribution of PWN sites and built a PWN risk level model to predict the risk levels of PWN outbreaks in the region. The results showed that: (1) the best model for the predictive probability of PWN presence is the RF classification algorithm. For the presence prediction of the dead trees caused by PWN, the detection rate (DR) was 96.42%, the false alarm rate (FAR) was 27.65%, the false detection rate (FDR) was 4.16%, and the area under the receiver operating characteristic curve (AUC) was equal to 0.96; (2) anthropogenic activity variables had the greatest effect on PWN occurrence, while the effects of slope and aspect were relatively weak, and the maximum, minimum, and median values of remote sensing indices were more correlated with PWN occurrence; (3) modeling analysis of different risk levels of PWN outbreak indicated that high-risk level areas were the easiest to monitor and identify, while lower incidence areas were identified with relatively low accuracy. The overall accuracy of the risk level of the PWN outbreak was identified with an AUC value of 0.94. From the research findings, remote sensing data combined with GIS data can accurately predict the probability distribution of the occurrence of PWN disease. The accuracy of identification of high-risk areas is higher than other risk levels, and the results of the study may improve control of PWN disease spread. [ABSTRACT FROM AUTHOR]

The aim of this study was to explore the differences in the accuracy of winter wheat identification using remote sensing data at different growth stages using the same methods. Part of northern Henan Province, China was taken as the study area, and the winter wheat growth cycle was divided into five periods (seeding-tillering, overwintering, reviving, jointing-heading, and flowering-maturing) based on monitoring data obtained from agrometeorological stations. With the help of the Google Earth Engine (GEE) platform, the separability between winter wheat and other land cover types was analyzed and compared using the Jeffries-Matusita (J-M) distance method. Spectral features, vegetation index, water index, building index, texture features, and terrain features were generated from Sentinel-2 remote sensing images at different growth periods, and then were used to establish a random forest classification and extraction model. A deep U-Net semantic segmentation model based on the red, green, blue, and near-infrared bands of Sentinel-2 imagery was also established. By combining models with field data, the identification of winter wheat was carried out and the difference between the accuracy of the identification in the five growth periods was analyzed. The experimental results show that, using the random forest classification method, the best separability between winter wheat and the other land cover types was achieved during the jointing-heading period: the overall identification accuracy for the winter wheat was then highest at 96.90% and the kappa coefficient was 0.96. Using the deep-learning classification method, it was also found that the semantic segmentation accuracy of winter wheat and the model performance were best during the jointing-heading period: a precision, recall, F1 score, accuracy, and IoU of 0.94, 0.93, 0.93, and 0.88, respectively, were achieved for this period. Based on municipal statistical data for winter wheat, the accuracy of the extraction of the winter wheat area using the two methods was 96.72% and 88.44%, respectively. Both methods show that the jointing-heading period is the best period for identifying winter wheat using remote sensing and that the identification made during this period is reliable. The results of this study provide a scientific basis for accurately obtaining the area planted with winter wheat and for further studies into winter wheat growth monitoring and yield estimation. [ABSTRACT FROM AUTHOR]