Search

To solve the problem of feature selection and error correction after mode decomposition and improve the ability of power load forecasting models to capture complex time series information, a two-stage short-term power load forecasting method based on recursive feature elimination with a cross validation (RFECV) algorithm and time convolution network–efficient channel attention mechanism–long short-term memory network (TCN–ECA–LSTM) is presented. First, the load sequence is decomposed into a relatively stable set of modal components using variational mode decomposition. Then, the RFECV-based method filters the feature set of each modal component to construct the best feature set. Finally, a two-stage prediction model based on TCN–ECA–LSTM is established. The first stage predicts each modal component and the second stage reconstructs the load forecast based on the predicted value of the previous stage. This paper takes actual data from New South Wales, Australia, as an example, and the results show that the method proposed in this paper can build the feature set reliably and efficiently and has a higher accuracy than the conventional prediction model. [ABSTRACT FROM AUTHOR]

Chronic disease identification and management is a significant issue in Australia, with general practice being the primary contact point for those at risk of, or living with, chronic disease. However, there is a well-described gap between guideline recommendations for chronic disease management and translation in the general practice setting. In 2018, a group of researchers, clinicians and software developers collaborated to develop a tool to support the identification and management of chronic disease in general practice, with the aim to create a platform that met the needs of general practice. The co-design process drew together core principles and expectations for the establishment of a technological platform, called Future Health Today (FHT), which would sit alongside the electronic medical record (EMR) management system within general practice. FHT used algorithms applied to EMR data to identify patients with, or at risk of, chronic disease and requiring review. Using chronic kidney disease as a clinical focus, the FHT prototype was piloted in a large, metropolitan general practice, and a large regional general practice. Based on user feedback, the prototype was further developed and improved. This paper provides a report on the key features and functionalities that participants identified and implemented in practice. Future Health Today is a new platform, co-designed by general practice for general practice, which aims to streamline the identification and management of chronic disease to improve health outcomes. This paper describes the development of the technology platform and how it was optimised through an implementation study in general practice. [ABSTRACT FROM AUTHOR]

The objective of this paper is to assess whether existing pavement temperature prediction algorithms can be used to reliably determine Performance Grade (PG) design temperatures for Australian asphalt pavements. The results show good agreement between internationally and locally developed pavement temperature algorithms for the prediction of high pavement design temperature. There is more variability between models in the prediction of low pavement design temperature. The paper also provides a set of PG grading results for a range of Australian asphalt binders. The findings indicate that for a given design situation harder bitumen, ormore highly modified binder would be specified in Australia than in jurisdictions using the PG system. [ABSTRACT FROM AUTHOR]

Accurate short-term load forecasting (STLF) is of positive significance to the effective management of power companies and the stable operation of society. In spite of many studies conducted in this field, there are few to consider the inherent disadvantages of an individual module, which results in sub-optimal forecasting accuracy. Therefore, by integrating data preprocessing module and optimization module into support vector regression (SVR) forecasting module, this paper successfully presents a novel model (AHO-Lasso-SVR). The data preprocessing module, which is comprised of feature construction and Lasso feature selection, is used to construct and select meaningful features. An adaptive hybrid optimization (AHO) algorithm is proposed by introducing two strategies on the basis of standard particle swarm optimization (PSO). The AHO algorithm inevitably increases the computational complexity of model learning, thus, this paper proposes a subsampling technology to improve the optimization efficiency of the algorithm based on the sparsity of SVR. The proposed model is used to forecast the load at 48 points in the next day. To verify the properties of the proposed model, power load data from New South Wales, Australia are adopted as a case study. The results reveal that our model positively exceeds all comparison models in terms of forecasting accuracy and stability. [ABSTRACT FROM AUTHOR]

As more and more photovoltaic (PV) systems are integrated into the grid, the intelligent operation of the grid system is facing significant challenges. Therefore, accurately forecasting PV power output at various time scales is particularly urgent. To meet this demand, this paper proposes an LSTM-Informer model based on an improved Stacking ensemble algorithm (ISt-LSTM-Informer). The proposed model improves the k-fold cross validation in the traditional Stacking algorithm to a time-series cross validation for integrating time-series forecasting models. Simultaneously, it utilizes long short-term memory (LSTM) and Informer as the base models. By integrating the advantages of the two base models, the ISt-LSTM-Informer achieves accurate short and medium-term PV power forecasting. To validate the effectiveness of the model, a historical dataset from a PV system located in Uluru, Australia, is used for various types of experiments. Among them, comparative experiments validate the superiority of the model. Compared with five other methods, the ISt-LSTM-Informer obtains 21 optimal results for the four evaluation metrics of RMSE, MAE, MAPE, and R 2 across eight forecasting time scales. In addition, different combinations of base models are conducted to verify the advantages of the Stacking ensemble algorithm and the two base models, respectively. • A novel multi-timescale photovoltaic power forecasting model is proposed. • Time-series cross validation is introduced into the Stacking algorithm. • LSTM and Informer are utilized as the base models of the Stacking algorithm. • Various methods are compared to verify the proposed model's effectiveness. • The model's predictive accuracy is illustrated through various visualization methods. [ABSTRACT FROM AUTHOR]