Search

Background: Health care systems contribute significantly to greenhouse gas emissions. One source of these emissions is single-use products. Examination table paper does not confer protection against microbial contamination and thus can be omitted while following infection control standards. The objective is to eliminate the routine use of examination table paper in outpatient oncology clinics at BC Cancer. Methods: A quality improvement approach was used. Examination tables continued to be disinfected using wipes between patients, but table paper was not used. Plan-do-studyact cycles were performed at four regional cancer centres. Results: Pre-intervention, the cancer centres used 19 to 69 rolls of paper monthly. Postintervention, usage declined to 0 to 2 rolls monthly. This was associated with annual cost savings of $3974 and a reduction of 32 501 kg of carbon dioxide emissions. Conclusions: The use of examination table paper can be eliminated in outpatient clinics, resulting in both cost savings and a reduction in carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

China has been the world's largest producer and consumer of paper products. In the context of the "carbon peaking and carbon neutrality goals", China's papermaking industry which is traditionally a high energy-consuming and high-emissions industry, desperately needs a nationally appropriate low-carbon development path. From the consumption-side perspective, this paper calculates the CO2 emissions of China's papermaking industry from 2000 to 2019 by using carbon emission nuclear algorithm, grain-straw ratio, first-order attenuation method, and STIRFDT decomposition model, etc., to further explore the core stages and basic patterns affecting the industry's carbon peaking. The results show that the total CO2 emissions of China's papermaking industry showed an upward trend from 2000–2013, stable from 2013–2017, and a steady but slight decline from 2017–2019. Meanwhile, the total CO2 emissions of the full life cycle of paper products in China have decreased to a certain extent in the raw material acquisition, pulp, and paper making and shipping stages, with only the waste paper disposal stage showing a particular upward trend. We find that from 2000 to 2019, China's CO2 emissions in the pulping and papermaking stage of paper products accounted for 68% of the total emissions in the whole life cycle, of which 59% was caused by coal consumption. Moreover, the scenario prediction shows that improving the energy structure and increasing the waste paper recovery rate can reduce the CO2 emissions of the industry, and it is more significant when both work. Based on this and the four core stages of CO2 emissions of the papermaking industry we proposed ways to promote CO2 emissions peaking of China's paper products. [ABSTRACT FROM AUTHOR]

Encouraged by the goal of achieving net-zero carbon emission by 2050, the exploration of insulating material becomes one of the core projects to the electrical equipment innovations. The rise of composites enables the insulating material to be endowed with more functions. By this concern, adopting the coupling agents is one of the effective methods to improve the compatibility of composites, which highly strengthens the desired properties. The functional groups of coupling agents, nevertheless, could not always show a positive impact to access enhanced properties. In this work, four types of silane coupling agents including amino-propyl, glycidyletheroxy-propyl (GP), vinyl, and methacryloxy-propyl functional groups are employed to modify the aluminum nitride (AlN) fillers, and the modification effects on the insulating and thermal conductivity of the AlN/poly(m-phenylenedicarbonyl-m-phenylenediamine) (PMIA) composite paper are systematically investigated and compared. The results show that a proper coupling agent is beneficial to the uniform dispersion of the inorganic filler in the organic matrix and highly contributes to their interface quality, where the heat transfer path is established that boosts the heat dissipation. By tailoring the trap depth and density toward deeper and higher, the carrier transport is highly confined which enhances the breakdown strength to a large extent. Therefore, high breakdown strength and thermal conductivity of 182.9 kV mm−1 and 0.302 W (m·K)−1, respectively, are achieved in the GP modified AlN/PMIA paper, which are 16.7% and 167.4% higher than that of pure PMIA paper. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

The text provides a summary of various articles related to air quality, climate change, and environmental initiatives. It mentions a report from the World Meteorological Organization (WMO) highlighting record-breaking climate change indicators in 2023, the use of pulp and paper waste to reduce carbon emissions, the development of national indoor quality standards for public buildings, the establishment of a hydrogen hub in the Pilbara region of Australia, and the U.S. Environmental Protection Agency's new tailpipe rules to reduce pollution from cars and light trucks. These articles offer insights into the current state of the environment and efforts to address climate change. [Extracted from the article]

Copyright of Archives of Environmental Protection is the property of Polish Academy of Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Every ophthalmic surgical supply, including intraocular lenses (IOLs), IOL cartridges, and ophthalmic viscosurgical device syringes, is packaged with instructions for use (IFU). These pamphlets are printed in multiple languages and, in the case of an IOL, significantly increase the size and weight of the packaging. To eliminate this significant and unnecessary source of waste, we recommend that manufacturers move to Quick Response codes that link to online electronic IFU (e-IFU) as a sensible alternative. In addition to reducing carbon emissions and manufacturing costs, e-IFU can be updated more easily and accessed by surgeons in the clinic, where IOL models and powers are selected. Varying and inconsistent IFU requirements between different countries are a barrier to wider adoption of e-IFU by the ophthalmic surgical industry. Regulatory agencies in every country should allow and encourage e-IFU. This position paper has been endorsed by the 3 major societies that sponsor EyeSustain, a consortium of global societies dedicated to advancing sustainability in ophthalmology. [ABSTRACT FROM AUTHOR]

The increasing demand for world paper consumption stimulates the growth of paper and pulp industries and lead to high carbon emission. Electricity and thermal energy are critically demanded by the paper and pulp industries. The premises utilizing grid electricity are carbon intensive as the grid energy mainly generates electricity from burning coal. Alternative energy resources that are less carbon-intensive such as natural gas and solar energy, can be used to generate electricity to fulfil the energy demand of the pulp and paper industry and mitigate carbon emissions. This study implemented cogeneration natural gas boilers and solar energy to substitute the dependency on grid electricity from Tenaga National Berhad as they are less carbon intensive than coal fuel. Carbon and economic analysis were conducted on the case studies that replaced grid electricity supply from TNB by implementing cogeneration natural gas boilers and solar energy. The results show that the total savings/kWh of energy produced from cogeneration natural gas boiler range from 0.155 MYR/kWh to 0.164 MYR/kWh. The total savings per kWh of energy produced from solar energy is higher, which was 0.207 MYR/kWh of solar energy produced. Solar has better operation cost savings per unit of electricity generated, but a limited installation area restricts the implementation. In the future, the increasing efficiency of solar technology will make the option viable while achieving more cost savings and carbon emission reduction. [ABSTRACT FROM AUTHOR]

Reducing examination table paper (ETP) use may help curb carbon emissions from health care. Six participants applied Glo Germ (DMA International) to their hands before a common physical examination (abdominal, cardiorespiratory, hip and knee) both with and without ETP. After each exam, UV light was shined on the exam table and photographs were taken. The number of hand touches on ETP-covered areas and uncovered areas were tallied and compared using t tests. Despite covering more surface area, participants touched areas without ETP significantly more than ETP-covered areas (P <.05). Despite its continued use, patients do not have much hand contact with ETP during common clinical examinations. [ABSTRACT FROM AUTHOR]

Recycling is emerging as both a viable alternative to extraction in many industries and a cornerstone of the circular economy. In this paper, we assess the role of paper and cardboard recycling on the forest sector, from both an economic and carbon perspective. For this purpose, we add the recycling industry to an existing forest-sector model in an attempt to capture its effects on other wood products and the overall forest resource. As the forest sector has an important potential for climate change mitigation, this model allows us to assess the effects of increased paper and cardboard recycling on the availability of the natural resource and the carbon balance of the forest sector. We show that these results are strongly linked to the hypotheses of substitutability and/or complementarity of recycled pulp and virgin pulpwood. Although we find increased emissions at the pulp sector level, the effects on emissions in other wood products are small. When pulp products are considered substitutes, we find the impact on total net sequestration to be positive. In the case where pulp products are considered complements, we find the impact on total net sequestration to be negative. [ABSTRACT FROM AUTHOR]

This study investigates the impact of incorporating lime mud (LM) as a filler material to develop sustainable, cementless ultra-high performance concrete (UHPC) by replacing silica powder (SP) and silica sand (SS) at varying percentages. Flowability analysis reveals that LM, with its distinctive particle size, influences flow characteristics differently at different replacement levels. Compressive strength was improved by 5.4% with 30% SP replacement, showcasing the role of LM in nucleation, as well as its particle size advantage. The heat of hydration analysis indicates that LM likely influences the early curing stages, enhancing reactivity and nucleation. TGA analysis also confirms that LM plays a role in hydration reaction, influencing weight loss and hydration peaks. The mercury intrusion porosimeter results show the impact of LM on pore distribution, with 30% for SP and 50% for SS replacements, favoring denser matrices. Life cycle assessment (LCA) demonstrates reduced CO 2 emissions and favorable environmental performance, highlighting the sustainability potential of LM replacements. Overall, the incorporation of LM in UHPC shows promise in terms of enhancing its mechanical properties and environmental sustainability. [Display omitted] • Lime mud (LM) in UHPC boosts material strength, leading to denser, more effective concrete. • LM enhances hydration, flowability, and refines pore structure. • High LM ratios in UHPC increase sustainability and reduce CO 2 emissions. • LM's use in UHPC significantly advances its mechanical properties and eco-friendliness. [ABSTRACT FROM AUTHOR]

The paper industry is a high-carbon emission and energy-intensive industry. From the perspective of low-carbon trade and carbon neutrality, its energy conservation and emission reduction are worthy of attention. This study used the input-output model to calculate the embodied carbon emissions of China’s paper industry’s export trade to the United States from 2006 to 2020 and used the logarithmic mean division index (LMDI) method to analyze influencing factors of the change of embodied carbon emissions. The study found that the embodied carbon emissions of China’s paper industry’s export trade to the United States generally shows a stable downward trend after reaching the peak with the increase of export trade scale; scale effect is the main factor that causes the embodied carbon emissions, while technological progress, policy support, and environmental regulations are important driving forces to promote carbon emission reduction. The research results of this paper not only can test and guide China’s paper industry trade policies and industrial policies, but they can also provide decision-making reference for China and the United States to promote the carbon emission reduction of the paper industry. [ABSTRACT FROM AUTHOR]

As the tragedy in Ukraine deepens, it's clear that the world should end its dependency on Russian oil. It will be ironic, however, if nations disentangling themselves from this compromised energy source instead turn to another energy source with destructive impacts: harvesting and burning forest wood for fuel, which increases carbon emissions compared to fossil fuels, and degrades forests. [ABSTRACT FROM AUTHOR]

This paper studies the impact of digital economy development on carbon emissions, which is a hot topic in the field of environmental economics. This topic is within the scope of the Frontiers in Environmental Science and is particularly in line with the theme of Environmental Economics and Management section in the journal. Firstly, this paper constructs the Digital Economy Development Index and its variable indicators to measure the development of the digital economy. Secondly, this paper uses urban panel data to reveal the impact of digital economy development on carbon emissions, and further adopts IV method to deal with endogeneity issues. Thirdly, this paper performs the heterogeneity analyses depending on the characteristics of the city. The results can provide a basis for formulating differentiated policies. Fourthly, this paper further explores the mechanism by which the digital economy affects carbon peaking. The results show that the digital economy may influence carbon peaking through upgrading of the industrial structure, technical innovation, and energy consumption. [ABSTRACT FROM AUTHOR]

Carbon emissions from the Yangtze River Economic Belt are an important element of China's carbon emission endeavor, and a study of its emission reduction pathway can provide a reference for the country's overall management of carbon emission reduction. From the perspective of energy consumption, this paper uses the carbon emission factor method to estimate the carbon emissions of the transportation industry in the Yangtze River Economic Belt during 2006–2020, based on the extended STIRPAT model, considering the influence of seven factors, i.e., population size, urbanization rate, GDP per capita, transportation added value, energy structure, energy intensity, and transportation intensity, on carbon emissions. Based on these factors, a scenario analysis, combined with a forecasting model, is used to predict the peak carbon performance of the transportation industry under different development scenarios. The results show that the overall carbon emissions of transportation in the YEB from 2006 to 2020 show a fluctuating upward trend, and the downstream carbon emissions are significantly higher than those in other regions. The main factors influencing carbon emissions from transportation in different upstream, midstream, and downstream regions vary, with both population and economic factors contributing to carbon emissions, while technical factors affect them differently. There are significant differences in the peak carbon performance of transportation under different development scenarios, and the government should take effective measures to work towards achieving the goals of the low-carbon or enhanced low-carbon scenarios. [ABSTRACT FROM AUTHOR]

Carbon emission issues are becoming increasingly severe, and the carbon emissions in shrinking cities, primarily characterized by population loss, are often overlooked and insufficiently studied. This paper focuses on the carbon emissions from county-level administrative units in China's three northeastern provinces from 2001 to 2017. The study scientifically identified shrinking cities and measured the differences in carbon emission characteristics between growing and shrinking cities using the Theil index. Ultimately, the paper constructs a panel spatial econometric model to analyze the factors influencing them and explore their spatial effects. (1) The total carbon emissions in the Three Northeastern Provinces exhibited an inverted U-shaped trend, increasing from 734.21 million tons in 2001 to 1731.73 million tons in 2017, with the Mann–Kendall trend test showing a significant increase; spatially, this manifests as a significant positive spatial autocorrelation. (2) The region has 138 shrinking cities, accounting for over 50%; regarding carbon emission characteristics, the Theil index has consistently remained above 0.18, indicating significant differences between the carbon emissions of growing and shrinking cities. (3) The panel spatial econometric model results show that the influencing factors of carbon emissions in shrinking cities have unique directions, intensities, and spatial effects. In shrinking cities, aside from localized GDP effects and per-capita GDP acting as a suppressant, the population size has a pronounced inhibitory effect on local and surrounding carbon emissions. The analysis reveals significant differences in the carbon emission patterns and mechanisms between growing and shrinking cities; based on these results, the paper proposes differentiated carbon control strategies. [ABSTRACT FROM AUTHOR]

Copyright of Avances is the property of Instituto de Informacion Cientifica y Tecnologica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Engineering (17264073) is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Using a panel data set from 2007 to 2019, we empirically evaluate the impact of carbon capture, utilization, and storage (CCUS) technology innovation on green total factor productivity (GTFP). The findings show that (1) CCUS technology innovation significantly improves GTFP. (2) CCUS technology innovation significantly contributes to GTFP by promoting industrial structure upgrading and carbon emissions efficiency. (3) Environmental regulation plays a positive moderating role in the nexus between CCUS technology innovation and GTFP. The findings of this paper provide guidance for China to achieve green energy transition and build a green energy system. [ABSTRACT FROM AUTHOR]

The building sector contributes to 40% of the total final energy consumption and 36% of CO2 emissions in Europe, and these are set to increase in the coming years. International directives are pushing towards a decarbonisation roadmap to improve the quality of cities and the health of citizens. Buildings have a potentially central role in terms of energy transition as a means to produce and save energy. Photovoltaic shading devices (PVSDs) protect buildings from direct solar radiation and overheating while producing renewable electricity onsite and increasing the users' thermal comfort. Even though the potential of the PVSD is considerable, the sector is still unexplored, and few studies on the topic are available in the literature. This systematic review aims to present an exhaustive overview of the current literature on state-of-the-art PVSDs by analysing the scientific framework in terms of the status of the research. It presents a performance-based approach focusing on innovative products, PVSD design strategies, and energetic performance in distinct climate conditions and configurations. In particular, 75 articles and about 250 keywords were identified, selected, and analysed. The literature review serves as a basis for further R&D activities led by both the industrial and the academic sectors. [ABSTRACT FROM AUTHOR]

Numerical simulations based on Computational Fluid Dynamic techniques are performed to analyze the possibility of feeding a biomass-derived syngas into the combustion chamber upstream of the hoods for tissue-paper drying, to replace fossil fuels and thus decarbonize the plant. It was observed that, in the context of Favre-Averaged Navier–Stokes equations simulation, syngas requires detailed kinetics and finite-rate approaches, as the fast-chemistry ones, largely employed in the industrial practice for conventional fuels, lead to unreliable results. The actual chamber, originally designed to be fed with liquid petroleum gas, does not operate properly when fueled with syngas, with incomplete oxidation of carbon monoxide. Numerical simulations have proven how very few modifications of the chamber can be devised to permit feeding efficiently the syngas, obtaining low pollutant emissions and meeting the desired requirements in terms of flow and thermal uniformity for the drying process. The solution proposed in the present study, with the effective use of a biomass-derived syngas to feed the drying section of a tissue paper plant, will allow saving approximately 8500 ton/y of CO 2 emissions in comparison with today's fossil fuel carbon footprint. [Display omitted] • Use of syngas from biomass gasification to decarbonize a tissue paper plant. • CFD simulations to comprehend the behavior of chamber and hood fed with bio-syngas. • Need for detailed kinetics to model with CFD the bio-syngas combustion. • Modification of the combustion system needed to limit CO with the bio-syngas. • Reduction of 8500 ton/y of CO 2 emissions in comparison to today's LPG. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

Paper has shaped society for centuries and is considered one of humanity's most important inventions. However, pulp and paper products can be damaging to social and natural systems along their lifecycle of material extraction, processing, transportation, and waste handling. The pulp and paper industry is among the top five most energy-intensive industries globally and is the fourth largest industrial energy user. This industry accounts for approximately 6% of global industrial energy use and 2% of direct industrial CO 2 emissions. The pulp and paper industry is also the largest user of original or virgin wood, with deleterious impacts on both human health and local flora and fauna, including aquatic ecosystems. This critical and systematic review seeks to identify alternatives for mitigating the climate impacts of pulp and paper processes and products, thus making the pulp and paper industry more environmentally sustainable. This study reviews 466 studies to answer the following questions: what are the main determinants of energy and carbon emissions emerging from the pulp and paper industry? What are the benefits of this industry adopting low-carbon manufacturing processes, and what barriers will need to be tackled to enable such adoption? Using a sociotechnical lens, we answer these questions, identify barriers for the pulp and paper industry's decarbonization, and present promising avenues for future research. •This review identifies carbon-intensive processes in the pulp and paper industry. •Presents decarbonizing practices, potential transformations and innovations. •Presents promising avenues for future research. •No agreed consensus on the most promising technologies to achieve net-zero in the pulp and paper industry. •Pulp and paper products are associated with other sociotechnical systems that create compelling interdependencies among industries. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to explore the pathways of carbon transfer in 200 US corporations along with the motivations that drive such transfers. The particular focus is on each firm's embeddedness in the global value chain (GVC) and the influence of environmental law, operational costs and corporate social responsibility (CSR). The insights gleaned bridge a gap in the literature surrounding GVCs and corporate carbon transfer. Design/methodology/approach: The methodology comprised a two-step research approach. First, the authors used a two-sided fixed regression to analyse the relationship between each firm's embeddedness in the GVC and its carbon transfers. The sample consisted of 217 US firms. Next, the authors examined the influence of environmental law, operational costs and CSR on carbon transfers using a quantitative comparison analysis. These results were interpreted through the theoretical frameworks of the GVC and legitimacy theory. Findings: The empirical results indicate positive relationships between carbon transfers and GVC embeddedness in terms of both a firm's position and its degree. From the quantitative comparison, the authors find that the pressure of environmental law and operational costs motivate these transfers through the value chain. Furthermore, CSR does not help to mitigate transfers. Practical implications: The findings offer insights for policymakers, industry and academia to understand that, with globalised production and greater value creation, transferring carbon to different parts of the GVC – largely to developing countries – will only become more common. The underdeveloped nature of environmental technology in these countries means that global emissions will likely rise instead of fall, further exacerbating global warming. Transferring carbon is not conducive to a sustainable global economy. Hence, firms should be closely regulated and given economic incentives to reduce emissions, not simply shunt them off to the developing world. Social implications: Carbon transfer is a major obstacle to effectively reducing carbon emissions. The responsibilities of carbon transfer via GVCs are difficult to define despite firms being a major consideration in such transfers. Understanding how and why corporations engage in carbon transfers can facilitate global cooperation among communities. This knowledge could pave the way to establishing a global carbon transfer monitoring network aimed at preventing corporate carbon transfer and, instead, encouraging emissions reduction. Originality/value: This study extends the literature by investigating carbon transfers and the GVC at the firm level. The authors used two-step research approach including panel data and quantitative comparison analysis to address this important question. The authors are the primary study to explore the motivation and pathways by which firms transfer carbon through the GVC. [ABSTRACT FROM AUTHOR]

This paper analyses carbon emissions and value-added embodied in trade between two large developed countries, South Korea and the United States, during 2000-2014. Using multi-regional input-output (MRIO) tables, our analysis reveals that carbon emissions and value-added embodied in exports grew by 19% and 101% for South Korea but shrank by 43% and 7% for the United States. As a result, South Korea experienced a 40% increase in net carbon exports and 243% increase in net valueadded exports. At the industry level, the primary drivers of changes in carbon exports were electricity and basic materials. The majority of industries in witnessed improvements in carbon intensities suggesting improved environmental efficiency. While both countries achieved a decoupling of carbon emissions from value-added exports, substantial year-to-year and sectoral variations were observed. Finally, structural decomposition analysis indicates that domestic supply-side factors played a role in decreasing emissions whereas foreign demand-side factors contributed to emissions increases. In line with the main findings, various implications for policy and future research are discussed. [ABSTRACT FROM AUTHOR]

Improving carbon emission efficiency is crucial for achieving carbon peak and carbon neutrality. This paper analyzes the carbon emission efficiency of Chinese cities using panel data from 275 prefecture-level cities between 2006 and 2020. The super-efficiency SBM (undesirable slacks-based measurement) model of undesired output, combined with kernel density estimation and exploratory data analysis, is employed. This study finds, firstly, from 2006 to 2020, the average efficiency of carbon emissions in Chinese cities declined from 0.53 to 0.48, indicating a downward trend. Secondly, from a temporal perspective, the level of dispersion in urban carbon emission efficiency has become increasingly distinct over time, coupled with a decrease in polarization. Thirdly, in terms of spatial analysis, urban carbon emission efficiency in China shows a positive correlation in a global context. In terms of local spatial correlation, it primarily exhibits high-high and low-low clusters, with a few instances of low–high and high-low clusters. Finally, based on the research findings, this paper proposes suggestions to improve urban carbon emission efficiency. [ABSTRACT FROM AUTHOR]

This article, titled "Comments by Phouphet Kyophilavong on Toward a Green Energy System: How Does Carbon Capture, Utilization, and Storage Technology Innovation Promote Green Total Factor Productivity?" explores the impact of carbon capture, utilization, and storage (CCUS) technology innovation on green total factor productivity (GTFP). The author raises questions about the calculation of GTFP and the advantage of using the Global Malmquist-Luenberger (GML) index. They also inquire about the variables and calculation of the CCUS technology innovation index and suggest conducting tests for normality, nonlinearity, and parameter stability. Additionally, the author recommends including more literature on mediating and moderating roles and addressing multicollinearity problems. [Extracted from the article]

Magnetotelluric (MT) and audio-magnetotelluric (AMT) studies are sensitive to the geothermal fluids filling the faults and/or fracture zones of the geothermal system. In India, MT/AMT studies have been carried out in NW Himalayas, central, eastern, and western India. In other areas, detailed MT/AMT studies need to be expedited. This review paper presents the art of geothermal exploration in India by using MT/AMT techniques and identifies potential zones that can be exploited for power generation and direct application. Reservoir characteristics, carbon emissions reduction methods, and levelised cost factor are also discussed. [ABSTRACT FROM AUTHOR]

• RCF wastes brick achieves 24% lower thermal properties than the control brick. • RCF wastes brick requires 10% lower firing temperature than the control brick. • Utilizing as-received waste materials requires zero grinding energy, benefiting manufacturers and cutting emissions. • Lower firing temperature saved $158,460 by cutting 417 tonnes of CO 2. Building materials drive the global economy, yet face severe environmental hurdles: resource depletion, greenhouse gas emissions, and waste generation. In order to mitigate the impact from these challenges, authorities seek sustainable and eco-friendly alternatives as an urgent need. This study focuses on the utilization of as-received rejected contaminated fines (RCF) obtained from the yellow bins' waste (paper) recycling process, in brick production. Diverse tests assessed the brick performance, including compressive strength, absorption rate, thermal conductivity, 3D CT scanning for morphological analysis, and durability analysis. Additionally, a leachate analysis was performed to evaluate the environmental implications. Economic benefits, particularly the reduction of CO 2 emissions, were also evaluated. The findings confirmed that as-received waste can be utilized for fired clay brick production without the need for pulverization. The novel brick product made with as-received RCF waste exhibited superior thermal characteristics (up to a 31.25 % reduction compared to control bricks) while meeting the essential compliance requirements outlined by national standards. Moreover, each firing cycle led to a potential value of up to USD 158,460 through a reduction of 417 tonnes of CO 2 , resulting from a 9.5 % reduction in firing temperature (1000 °C). The results from this study offer valuable insights into the potential of using RCF waste as a sustainable alternative in the brick manufacturing industry. This alternative could address the soaring demand in the current market, resolve the escalating solid waste crisis, and mitigate clay shortages, while providing a sustainable solution for the brick industry. [ABSTRACT FROM AUTHOR]

With the implementation of deep-market-oriented reforms in China, an accurate interpretation of the effect and transmission mechanism of the marketization of industrial land transfer on carbon emission reduction can provide references for further elevating the role of land policy in China's low-carbon economic transition. Based on the balanced panel data of China's provincial level from 2009 to 2020, this paper uses carbon emission intensity to quantify emission reduction targets, and studies the effects of the marketization of industrial land transfer on regional carbon emission intensity, as well as its internal mechanism, by describing the typical characteristics. Moreover, this paper analyzes the moderating role of environmental governance and conducts area heterogeneity analysis. The main results show that (1) the marketization of industrial land transfer can significantly reduce regional carbon emission intensity, and the negative effect is stronger in the mid-west compared with the effect in the east. (2) Environmental governance can play a positive moderating role in the relationship between the marketization of industrial land transfer and the carbon emission intensity. (3) Industry selection is the internal mechanism by which the effect of the marketization of industrial land transfer on regional carbon emission intensity operates, and the mechanism is represented more prominently in the mid-west. The main conclusions provide inspiration for land policy regulation in relation to carbon emission reduction. China's local governments should implement specific strategies to improve the market-based operation mechanism of land, attracting industries with high energy efficiency and low carbon emissions, and strengthening the intensity of environmental governance. [ABSTRACT FROM AUTHOR]