Search

This study delves into the dynamic evolution of solids content in a pilot-scale through air drying tissue machine, aiming to enhance comprehension and refine optimization strategies for tissue manufacturing. It focuses on development of solids content throughout the process. Analyzing the interaction between process parameters and solids content provides deeper insights into water removal dynamics. The research employs solid contents monitoring techniques in pilot scale, offering a detailed view of solids content evolution from the wet web's inception to the final tissue product. It significantly highlights the impact of key parameters, particularly pulp refining, on solids content across all positions of the pilot machine. Additionally, the study emphasizes the influence of vacuum system configurations, identifying the relationship between energy expended in the vacuum system and evaporation energy. Furthermore, the results indicate that compression and air displacement dewatering in vacuum boxes are less speed-sensitive compared to heat-driven evaporation in the TAD- and Yankee cylinders. Solid contents at all positions in the tissue machine correlates between various dewatering elements. Optimizing site-specific dewatering and evaporation strategies can potentially save drying energy in the Yankee drying phase which hold promise for enhanced energy and resource utilization, aligning with demands for sustainable manufacturing practices. [ABSTRACT FROM AUTHOR]

It is well-known that energy consumption is increasing around the world on a daily basis. In the construction sector, a highly effective solution for reducing energy consumption involves exploring both modern and traditional buildings designed to adapt to climate changes. One promising approach is to use paper waste and bio-sourced materials as the basis for insulation. The purpose of this study was to improve the sustainability of buildings by using recycled waste materials that have a positive impact on the environment, people, and the economy. A novel insulating material composed of recycled paper waste and Ampelodesmos mauritanicus leaves and fibers was developed and used in non-load-bearing elements. The paper waste was transformed into pulp and mixed with the bio-sourced materials to create a composite material that exhibits excellent insulation properties. The resulting material is lightweight, durable, and cost-effective. Furthermore, different mechanical and thermal analyses were performed on specimens with varying dosage ratios. The results showed that the developed material has good thermal insulation, with a value of 0.027 W/m.K. [ABSTRACT FROM AUTHOR]

A novel approach for paper drying using airborne ultrasound technology is presented. A unique experimental setup is developed, and a systematic study is conducted using 23 factorial design of experiments and Analysis of Variance. Three controlling factors are considered in the experiments including the initial moisture content, basis weight and refining condition. The outcome of the experiments is compared to a previous work on direct-contact ultrasonic drying of paper. The results confirm that similar to direct-contact, for airborne ultrasonic drying, the basis weight/thickness of the sample is the most important factor in ultrasonic drying and it is followed by the effect of initial moisture content. Using linear regression model, a correlation for predicting the total time of ultrasonic drying is provided. Quality of the dried samples is evaluated, and the permeability measurements confirmed the effect of pore characteristics on ultrasonic drying. The analysis for energy consumption reveals that airborne ultrasonic drying is more efficient at higher moisture contents. [ABSTRACT FROM AUTHOR]

Overwintering insects are facing energetic challenges because of food shortage, low temperature, and desiccation stress. Paper wasps of the genus Polistes overwinter as mated adults (gynes) in hibernacula protecting them from predation, snow, and rain but barely from low environmental temperature. In different climates, they face differing overwintering temperature regimes, and therefore they may differ in their energy use. We investigated how much of energy resources built up until autumn is used during diapause dormancy in natural hibernacula by measuring lipid, glycogen, and free carbohydrate content in autumn and early spring in Polistes dominula from temperate European (Austrian) and warm Mediterranean (Italian) climate and Polistes gallicus from Mediterranean climate. Winter energy consumption amounted to ~ 339 and ~ 310 J per wasp in the Austrian and Italian Polistes dominula populations. The smaller Italian Polistes gallicus consumed ~ 247 J. This amounts to 2.62, 2.35, and 1.79 J per day. Of this, the energy demand was mainly fuelled by lipids (84%, 93%, and 90%, respectively), but glycogen stores contributed also considerably (16%, 6%, and 9%). Free carbohydrates decreased only by 0.7%, 1%, and 0.8%. While fat stores seem still sufficient in spring, the wasps depleted most of their carbohydrates. The energy reserves of 396, 400, and 147 J per wasp remaining in spring in the three populations seem sufficient to fuel rest or simple brood care activities for a whole summer but restrict foraging flights to a few hours (~ 3.5–6 h). Results suggest that energy supply might become challenging in expected future climate scenarios. [ABSTRACT FROM AUTHOR]

In order to study the cutting performance of the straight edge hob and reduce the cutting power consumption model of the straight edge hob, this paper takes the cutting power of the straight edge hob as the minimum goal, and establishes the mathematical model of the optimization design of the straight edge hob based on the composite optimization method. The mathematical model is solved by MATLAB software. At the same time,the mowing characteristics of a roller blade were studied by investigating the relationship between the hob and the coordination of variables such as rotational speed and roller diameter with the mowing parameters. The parameter analysis of straight edge hob before and after structural parameter optimization is generated, and a design method is proposed based on this. After defining the objective function and constraint conditions, the influence of structural parameters on the power consumption and efficiency of the hob was determined by optimising the complex method; this could significantly adjust the hob parameters to lower its power consumption. The energy consumption of the optimized design is reduced by 11.1 % compared with the original scheme, and the optimization effect is remarkable. The results show that the best working parameters of the hob are cutting speed of 1000 r/min, sliding cutting angle and grinding edge angle of 25~30°. Moreover, practical tests demonstrated the feasibility of using the proposed method to design the straight edge hob to improve mowing performance and hob stability. This study can provide parameter foundation and an optimization method for lowering chopping power consumption of the roller mower blade. [ABSTRACT FROM AUTHOR]

In the field of intelligent transportation, the planning of traffic flows that meet energy-efficient driving requirements necessitates the acquisition of energy consumption data for each vehicle within the traffic flow. The current methods for calculating vehicle energy consumption generally rely on longitudinal dynamics models, which require comprehensive knowledge of all vehicle power system parameters. While this approach is feasible for individual vehicle models, it becomes impractical for a large number of vehicle types. This paper proposes a digital model for vehicle driving energy consumption using vehicle speed, acceleration, and battery state of charge (SOC) as inputs and energy consumption as output. The model is trained using an optimized CNN-BiLSTM-Attention (OCBA) network architecture. In comparison to other methods, the OCBA-trained model for predicting PHEV driving energy consumption is more accurate in simulating the time-dependency between SOC and instantaneous fuel and power consumption, as well as the power distribution relationship within PHEVs. This provides an excellent framework for the digital modeling of complex power systems with multiple power sources. The model requires only 54 vehicle tests for training, which is significantly fewer than over 2000 tests typically needed to obtain parameters for power system components. The model's prediction error for fuel consumption under unknown conditions is reduced to 5%, outperforming the standard error benchmark of 10%. Furthermore, the model demonstrates high generalization capability with an R2 value of 0.97 for unknown conditions. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study's results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022. [ABSTRACT FROM AUTHOR]

State-of-the-art manufacturing of tissue paper by Through Air Drying provides excellent product performance, although at a high production cost and energy use. In this work, a laboratory scale vacuum suction box was used to mimic the initial dewatering and the Through Air Drying molding, together with a pilot-scale trial. The purpose was to investigate both how the laboratory scale corresponds to pilot scale testing and investigate how fabric design, basis weight, beating, and fibers affect dewatering and sheet caliper. This study reevaluates dewatering mechanisms during molding, challenging the previous hypothesis of pure air displacement dewatering. Results show a parallel mechanism of compression dewatering and air displacement. The influence of rush transfer is examined, impacting the sheets' visual appearance, thickness, and solids content. Correlations between molding box solids content and headbox freeness emphasize significance of fibers and beating levels. Pilot results confirm the link between former solids and molding box solids. Pilot trials validate the laboratory results, facilitating comprehensive simulation of full-scale manufacturing. This research reveals dewatering mechanisms, highlights operational parameters, and enables effective Through Air Drying process design and refinement. [ABSTRACT FROM AUTHOR]

The air-drying of resin impregnated paper sheets in industrial lines, formed by a serial array of furnaces, presents a high number of different controllable operational parameters whose adjustment, usually done by the maintenance staff, leads to non-efficient configurations. A model-based numerical tool, which predicts accurately in a few seconds the evolution of the paper temperature and paper grammage along the line for a given combination of the input operational parameters (direct design), was used coupled to an optimization tool to select appropriate operational parameters (inverse design) that ensure a drying process quality (i.e., fulfills an objective grammage profile) with a minimum of energy consumption. The numerical tool was capable of selecting suitable configurations with an energy reduction of up to 50% for several tested industrial cases, making the model an essential tool in the framework of the increasingly relevant role of digital twins in industry. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

Summary: In the pulp and paper industry, black liquor, which is a biomass resource, is burned to produce electricity. Black liquor is concentrated to 21 wt% water through an evaporator before being burned in a boiler. For the evaporator, a multiple‐effect evaporator (MEE) is mainly used, but it requires a large amount of energy and cost. Therefore, it is crucial to reduce energy and cost of evaporation process. Hence, this study suggested a novel process model that integrated mechanical vapor recompression (MVR) with MEE to increase the energy efficiency. The suggested MVR‐assisted evaporation process was composed of preheating and evaporation processes to effectively concentrate black liquor. In addition, it reduced the steam consumption of MEE by using MVR, which uses relatively inexpensive electric energy in the pre‐evaporation process. In the simulation results, the steam, electricity consumption, and the latent heat recovered from the secondary vapor of the suggested process were quantitatively analyzed to verify the energy efficiency. The results indicate that the proposed process increases substantial energy efficiency compared to the conventional process. Then, the appropriateness of the suggested process was evaluated by the techno‐economic analysis. The total annualized cost (TAC) is determined for both current and potential future economic benefits. TAC of the MVR‐assisted MEE configuration can be reduced by up to 77.54%. [ABSTRACT FROM AUTHOR]

Producing tissue paper is an energy-demanding process; a significant amount of energy is expended when removing water by vacuum, mechanical pressing, and thermal drying. Because the water is most energy-demanding to remove in drying, making the preceding step of vacuum dewatering more efficient would benefit the whole process. This article focuses on developing a laboratory-scale method for verifying the nature of diminishing returns of water removal and investigating efficiency strategies of the vacuum dewatering. The theoretical concept of successive vacuum suction boxes with progressing vacuum levels was tested at the laboratory scale in order to show quantifiable results of the previously solely theoretical concept. The results confirmed that vacuum dewatering can be improved by adding progressively higher vacuum levels and that such a practice can benefit both outgoing dryness levels and expended vacuum pump energy. To truly examine the power of progression of vacuum levels, rewetting can be included in the calculations, by using an approximate value collected from pilot or fullscale measurements. For any new fiber mix, pulp type, vacuum level setup, basis weight, etc. the vacuum levels, rewetting, and dwell times need to be tuned to that specific case. [ABSTRACT FROM AUTHOR]

Internet of Things (IoT) architectures generally focus on providing consistent performance and reliable communications. The convergence of IoT, edge, fog, and cloud aims to improve the quality of service of applications, which does not typically emphasize energy efficiency. Considering energy in IoT architectures would reduce the energy impact from billions of IoT devices. The research presented in this paper proposes an optimization framework that considers energy consumption of nodes when selecting a node for processing an IoT request in edge-fog-cloud layered architecture. The IoT use cases considered in this paper include smart grid, autonomous vehicles, and eHealth. The proposed framework is evaluated using CPLEX simulations. The results provide insights into mechanisms that can be used to select nodes energy-efficiently whilst meeting the application requirements and other network constraints in multi-layered IoT architectures. [ABSTRACT FROM AUTHOR]

Furthermore, very complicated multiphase and thermal processes are the corner stone in modern industry, high technology development, energy conversion and utilization, renewable and sustainable energy technologies, just to name a few here. Therefore, it is essential to develop new technology to improve energy utilization efficient, sustainable energy and low carbon/zero carbon technology to reduce carbon footprint. [Extracted from the article]

Recently, as the use of wearable devices and the demand for eco-friendly energy have increased, many studies have been conducted on triboelectric nanogenerators (TENGs), which can economically harvest energy. Paper is considered a promising substrate and frame material that can be used to manufacture self-powered TENGs, owing to its flexibility, low cost, and accessibility. Herein, we present a sandwich-structured foldable paper-based TENG (FP-TENG) that comprises flexible materials and uses paper as a substrate. The FP-TENG can generate up to 572 mW/m2 of power via contact–separation of the triboelectric electrified body at the top and bottom. With more folds of the FP-TENG, the triboelectric cross-sectional area increases, and, thus, the electrical output increases. In addition, the proposed TENG exhibits excellent durability without signal degradation under 5000 cycles of repeated pushing motions. To demonstrate its practicality, the FP-TENG was manufactured in the form of a wristwatch Velcro and connected to an electronic watch panel to supply power. Various deformations are possible with origami, and they can drive wristwatches through external forces. Therefore, the FP-TENG is expected to be utilized as a sustainable and promising eco-friendly energy source for small electronic devices. [ABSTRACT FROM AUTHOR]

The papers analyzed here were presented in the reposts of leading scientists in the processes and apparatuses of chemical technology and published in the Proceedings of the International Scientific and Technical Symposium "Improving the Energy and Recourse Efficiency and Environmental Safety of Processes and Apparatuses in the Chemical Industry and Allied Branches," which was dedicated to the 110th anniversary of A.N. Planovskii and held at Kosygin Russian State University. The scientific areas considered included the development of processes and apparatuses in chemical technology as a science and an educational discipline; the main trends in the theory of engineering of energy- and resource-efficient chemical engineering systems under the conditions of the digital economy; the possibilities of improving the efficiency of mass-transfer processes through the use of contemporary methods for the mathematical modeling and kinetic calculation of apparatuses, intensification, and energy and resource saving; the development of systems of computational fluid dynamics as applied to the spatial calculations of processes and apparatuses; innovative methods for the production of fibrous and nano materials; the fundamentals of methods for the intensification of basic processes in different industrial technologies; the scientific foundations for the creation of energy- and resource-efficient chemical engineering and other processes; considerations of environmental safety for technological processes and equipment; and efficient systems for the improvement of technospheric safety. [ABSTRACT FROM AUTHOR]

There is an urgent need for energy sources with lower environmental impacts to dispose of waste generated by human activities. In this context, a holistic analysis of energy use of waste from agricultural and forestry activities, animal excreta, urban solid waste and sewage, waste from the pulp and paper industry and charcoal in Brazil is presented. Based on a bibliographic review, the current Brazilian panorama is presented in figures giving, a vision of national potential for harnessing bioenergy from this theoretical and technical potential. The QGIS3.24.2 Tisler geoprocessing tool was used to generate potentiality maps from census data of microregions and municipalities available in the IBGE database (2022) and in the Geocentric Reference System for the Americas (SIRGAS 2000). The results of map analysis by micro‐regions of the primary energy from agricultural residues highlight sugar cane, corn and soybeans crops, followed by wastewater and animal excreta. They stood out amont the studied sources of biomass with technical potentials of 53.17, 15.23 and 6.81 GW, respectively. With these results, it is concluded that Brazil could enable around 75 GW installed power, reusing all biomass, potentially 12.5 PJ, without considering the 16 GW already installed from sugarcane and paper black liquor plants. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ultrafine marble dust waste particles were obtained using the top–down approach. • Waste and by-products had positive effect on dry grinding of stone wastes. • It is economically feasible, also environmentally friendly. • These obtained ultrafine particles can be used effectively mineral filler in many areas. Waste management in marble processing plants is a considerable problem in countries with developed stone industries and trade. Research on the utilization of stone waste in different fields is still continuing. However, there are few studies on using this stone waste from processing plants as mineral fillers. Moreover, no study in the literature has investigated the influence of grinding aids on stone properties. The current research is the first to compare of the efficiency of different grinding aids on the waste calcitic and dolomitic marble in the production of mineral fillers. The objective of this work is to research the impacts of waste and by-products on the dry grinding of stone wastes as grinding aids in a vertical stirred media mill. The results were assessed in terms of various parameters: product particle size, powder flowability, material coating on the grinding media, and energy consumption. Remarkably, the study showed that the use of any of the grinding aids tested enhanced the grinding process in comparison with the no-aid condition. The best product fineness value was achieved with pomace oil followed by the by-product glycerin, among the grinding aids tested in both samples. Moreover, a higher media coating reduction and the highest energy saving were achieved with pomace oil. The most significant and lowest increase in the fluidity index was achieved with pomace oil and paper wastewater, respectively. Additionally, the Fourier transform infrared spectroscopy (FTIR) performed to reveal the interaction between particle surfaces and grinding aids demonstrated the activity of pomace oil and glycerin polar functional groups on particle surfaces. The analysis of the agglomeration phenomenon with SEM (scanning electron microscopy) micrographs showed that particle agglomeration could be eliminated with the pomace oil. Thermogravimetric analysis (TGA) was used to investigate changes in the mass of the samples' due to temperature changes. With this study, a significant contribution will be made to the ecosystem using waste marble powder whose storage problematic. [ABSTRACT FROM AUTHOR]

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP. [ABSTRACT FROM AUTHOR]

Hydrothermal liquefaction was applied to treat paper‐plastic‐aluminum (Al‐PE‐Pa) complex packaging waste for bio‐oil production. The interactive effects between the main components of paper fiber, low‐density polyethylene (LDPE), and aluminum foil in such complex material were studied. The co‐liquefaction of paper fiber and LDPE had a significant synergistic effect. The addition of hydrogen‐rich LDPE effectively promoted the removal of oxygen‐containing groups. Aluminum foil had only a slight impact on the liquefaction of paper fiber, but it can significantly decrease the oxygen content of the bio‐oil, increase the high heating value of the bio‐oil, and significantly reduce the ester and phenol contents in the bio‐oil. The co‐liquefaction of paper fiber/LPDE/aluminum foil exhibited superimposed effects of paper‐plastic synergy and in‐situ hydrogenation of Al‐H2O reaction. A new pathway for the energy utilization of Al‐PE‐Pa complex packaging waste is provided. [ABSTRACT FROM AUTHOR]

Arid areas account for more than 20% of Earth's surface. Many of these arid areas suffer from harsh climates where energy consumption is high and production coexists with high hydrological stresses. In such areas, the production of water is directly linked to the production of electricity, bringing the Energy–Water nexus to a higher level [Heggy et al., Sustainable Energy-Water-Environment Nexus in Deserts (Springer, 2022)]. Under the current energy transition from a fossil-based economy to a renewable energy-based system, arid areas are seen as potential reservoirs for electricity production due to their high solar potential, thereby helping to achieve global decarbonation targets. This energy production transition will strongly affect the Energy–Water nexus as it will contribute to the decoupling of electricity from water production. The International Conference on Sustainable Energy–Water–Environment Nexus 2019 (ICSEWEN19) conference was the first to address the Sustainable Energy–Water Nexus in Deserts, bridging the gap between research and industry and highlighting the research capabilities relevant to Qatar, the region, and internationally. The Invited Papers from the International Conference on Sustainability, Energy, Water, and Environment Nexus in Desert Climates Special Collection in Journal of Renewable and Sustainable Energy presents articles covering the main elements of the conference with respect to solar photovoltaic implementation in desert environments as a key element to succeed in this global energy transition. [ABSTRACT FROM AUTHOR]

Aluminum powder particle size (D50) is quite important for how to improve the energy release level and formulation design of aluminized explosives. In this paper, four experimental samples of CL-20-based aluminized explosives with aluminum powder particle sizes including 2, 13, 24, and 43 μm were designed. The experiments were carried out through an underwater explosion tank and compared with explosives containing lithium fluoride of the same particle size. The results show that the burning of aluminum powder promoted the shock wave propagation and bubble expansion. Aluminized explosives have a lower and then higher decay rate than lithium fluoride-containing explosives. For the experimental range of aluminum powder particle sizes, with an increase in D50, the peak shock wave pressure first increased and then decreased, reaching the maximum at 24 μm; the shock wave and loss energy gradually increased, while the bubble energy, energy utilization, and underwater explosion total energy all gradually decreased. To a certain degree, the energy output structure can be regulated by adjusting the D50 under the premise of constant total energy of explosives. The experimental results improve our understanding of how D50 affects the underwater explosion parameters of aluminized explosives, which is of great significance for improving their energy utilization. [ABSTRACT FROM AUTHOR]

In this paper, a wideband metasurface-loaded (MTS-L) rectenna system is proposed to capture electromagnetic (EM) energy at arbitrary azimuth angles. The radiation patterns of different modes in the original MTS configuration are analyzed using the characteristic mode theory, and potential modes with omnidirectional radiation are screened out. By the arrangement of patches, the roundness performance of the radiation pattern can be ameliorated, and the omnidirectional characteristic is obtained over a wide frequency band. Subsequently, the surface current density of the selected mode is carefully and artificially designed to facilitate probe excitation as well as refrain from introducing complex power-combining networks. A wideband rectifier circuit is designed as the load of the proposed antenna. Eventually, measured results show that it operates from 4.6 to 9.6 GHz with a fractional bandwidth of 70.4%, and the peak system efficiency is 52.2%. The proposed system demonstrates excellent potential for wireless power transmission and EM energy harvesting in indoor environments. [ABSTRACT FROM AUTHOR]

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg−1) and CO emissions (22.89 ± 2.40 g kg−1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg−1 and 48.10 ± 12.50 gCO kg−1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials. • Analysis of waste-based briquettes use in Andean areas were conducted. • Laboratory analysis, social surveys, and on field evaluations are the methods. • Briquettes can be employed for reducing about 30% of the conventional fuels. • The research encourages the employment of waste-based briquettes in the Andes. • Incentives to briquettes production and consumption should be introduced. [ABSTRACT FROM AUTHOR]

The current study analyzed the high heating values (HHVs) of various waste biomass materials intending to the effective management and more sustainable consumption of waste as clean energy source. Various biomass waste samples including date leaves, date branches, coconut leaves, grass, cooked macaroni, salad, fruit and vegetable peels, vegetable scraps, cooked food waste, paper waste, tea waste, and cardboard were characterized for proximate analysis. The results revealed that all the waste biomass were rich in organic matter (OM). The total OM for all waste biomass ranged from 79.39% to 98.17%. Likewise, the results showed that all the waste biomass resulted in lower ash content and high fixed carbon content associated with high fuel quality. Based on proximate analysis, various empirical equations (HHV=28.296-0.2887(A)-656.2/VM, HHV=18.297-0.4128(A)+35.8/FC and HHV=22.3418-0.1136(FC)-0.3983(A)) have been tested to predict HHVs. It was observed that the heterogeneous nature of various biomass waste considerably affects the HHVs and hence has different fuel characteristics. Similarly, the HHVs of waste biomass were also determined experimentally using the bomb calorimeter, and it was observed that among all the selected waste biomass, the highest HHVs (21.19 MJ kg−1) resulted in cooked food waste followed by cooked macaroni (20.25 MJ kg−1). The comparison revealed that experimental HHVs for the selected waste biomass were slightly deviated from the predicted HHVs. Based on HHVs, various thermochemical and biochemical technologies were critically overviewed to assess the suitability of waste biomass to energy products. It has been emphasized that valorizing waste-to-energy technologies provides the dual benefits of sustainable management and production of cleaner energy to reduce fossil fuels dependency. However, the key bottleneck in commercializing waste-to-energy systems requires proper waste collection, sorting, and continuous feedstock supply. Moreover, related stakeholders should be involved in designing and executing the decision-making process to facilitate the global recognition of waste biorefinery concept. [Display omitted] • The high heating values (HHVs) of biomass waste were assessed with the aim for the sustainable consumption of waste as a source of clean energy. • All the biomass waste were rich in organic matter and fixed carbon content that ranged from 79.39% to 98.17% and 50.64%–54.26% respectively. • The maximum HHVs (21.19 MJkg−1) were recorded for cooked food waste. • The heterogeneous nature of various biomass waste considerably affects the HHVs and hence serve as suitable feedstock for various energy conversion technologies. [ABSTRACT FROM AUTHOR]

This paper examines the potential of solar and hydrogen (H 2) energy-based hybrid energy systems for residential applications. The growing need for energy and the demand for sustainable energy sources have led to the development of integrated energy systems that combine renewable energy resources to meet energy needs. This paper overviews recent studies on hybrid energy systems for on-grid and off-grid residential utilizations. It discusses the system configuration and components of hybrid energy systems, including solar panels, electrolyzers, fuel cells (FC), and batteries. It also covers the technical optimization of integrated energy systems, including sizing, control strategies, and economic analysis. The key findings of this review paper indicate that hybrid energy systems can offer dependable and sustainable energy for residential applications. Through numerical analyses, the optimal dimensioning of the system elements and control strategies can significantly enhance the system's performance and lower the cost of energy. This study also highlights the challenges and opportunities for integrating hybrid energy systems within residential applications. Overall, it provides in-depth perspectives on the possibilities inherent in solar and hydrogen energy-based hybrid energy systems for residential applications. The findings can guide future research and the advancement of hybrid energy systems for sustainable energy solutions. • Comprehensive review on solar and hydrogen-based residential applications. • Holistic approach to system configuration, optimization, and economics. • Detailed analysis of interconnected components enhancing system efficiency. • Unique focus on real-world residential applications and scenarios. • Broad applicability across diverse geographical regions. [ABSTRACT FROM AUTHOR]

In the context of 'energy shortage', developing a novel energy-based power system is essential for advancing the current power system towards low-carbon solutions. As the usage duration of lithium-ion batteries for energy storage increases, the nonlinear changes in their aging process pose challenges to accurately assess their performance. This paper focuses on the study LiFeO4(LFP), used for energy storage, and explores their performance degradation mechanisms. Furthermore, it introduces common battery models and data structures and algorithms, which used for predicting the correlation between electrode materials and physical parameters, applying to state of health assessment and thermal warning. This paper also discusses the establishment of digital management system. Compared to conventional battery networks, dynamically reconfigurable battery networks can realize real-time monitoring of lithium-ion batteries, and reduce the probability of fault occurrence to an acceptably low level. [ABSTRACT FROM AUTHOR]

This paper introduces a structural design which has superior energy harvesting ability. The proposed structure is based on the ability of most periodic structures to prohibit elastic waves from propagating in a specific frequency range of the phonon band gap. By leading into acoustic black hole (ABH) units and utilizing the energy concentration characteristics of the ABH structure, the filtering effect can be made more significant. These two characteristics can produce significant strain and energy localization, which is conducive to energy harvesting. In this paper, we obtained ABH unit capable of producing broadband gaps by adjusting the geometric parameters of the ABH structure, and chose a cantilever as the research object for energy harvesting, by applying a piezoelectric patch on the unit located near the fixed end to gain a broader application in the actual situation. The results show that the beam combining the energy concentration characteristics of band gap and ABH structure has a significant improvement in energy harvesting efficiency. Optimization on the parameters of ABH unit shows that the band gap characteristic of the periodic ABH structure can further optimize the energy harvesting efficiency of practical energy harvesters, and opens up a new possibility of energy harvesting of ABH structure. [ABSTRACT FROM AUTHOR]

This paper addresses the question whether energy consumption variables and the disaggregation of output matter in the context of efficiency analysis of container terminals. While it is obvious that the energy consumption of refrigerated cargo is higher than the energy consumption of non-refrigerated cargo, this work investigates whether those differences show in an overall efficiency analysis of terminals. This would point to a potentially important input for efficiency measures, to be considered in future productivity and efficiency analysis of terminals. Starting with a discussion on theoretical concepts and variable selection for measuring the energy dimension of terminal efficiency, this is the first paper that applies data envelopment analysis (DEA) comparing results with and without energy consumption, as well as differentiating productive outputs (dry and reefer container handling). The results reveal how the output disaggregation leads to substantially different efficiency scores and are a first step to show the relevance of output disaggregation and the inclusion of the energy variables as inputs in container terminal efficiency studies. [ABSTRACT FROM AUTHOR]

Energy saving has become a key concern of metro systems to reduce operating costs and meet the requirements of sustainable development. Energy-efficient timetabling, an effective way to reduce traction energy consumption, has gotten much attention in recent decades. However, limited research about energy-efficient timetabling simultaneously considered realistic speed profiles and the influence of train loads, which change greatly in different sections and significantly affect energy consumption. Therefore, this paper proposes an energy-efficient timetabling approach to improve regenerative energy utilization based on varying train loads and realistic speed profiles for bidirectional metro lines. First, based on the operational and safety constraints, this paper constructs an integer energy-efficient timetabling model where dwell times and nonuniform headways are taken as decision variables. Besides, the turnaround process is also considered to ensure rolling stock circulation efficiency. Sectional passenger volumes are employed to determine the varying train loads. Energy consumption is calculated based on realistic speed profiles. Owing to the complexity of the model, an improved adaptive large neighborhood search (ALNS) algorithm is designed to solve this model according to its characteristics. Finally, numerical examples are conducted based on the practical data from Shanghai Metro Line 17. The results indicate that the proposed approach effectively solves the energy-efficient timetabling problem with varying train loads and realistic speed profiles for bi-directional metro lines. The approach is suitable for off peak hours and can reduce energy consumption effectively, and the reduction is up to 11.9% for the presented cases. The improved ALNS algorithm can find good solutions within reasonable times in different cases. Moreover, compared with the widely used genetic algorithm in the literature, the improved ALNS algorithm is more efficient in solving the proposed energy-efficient timetabling problem in different cases. [ABSTRACT FROM AUTHOR]

This paper investigates the connection between climate change and energy security in Europe and provides empirical evidence that these issues are the two faces of the same coin. Using a panel of 39 European countries during the period 1980–2020, the empirical analysis presented in this paper indicates that increasing the share of nuclear, renewables, and other nonhydrocarbon energy and improving energy efficiency could lead to a significant reduction in carbon emissions and improve energy security throughout Europe. Accordingly, policies and reforms aimed at shifting away from hydrocarbons and increasing energy efficiency in distribution and consumption are key to mitigating climate change, reducing energy dependence, and minimizing exposure to energy price volatility. [ABSTRACT FROM AUTHOR]

New‐type professional farmers are new‐type rural talents with scientific and cultural literacy and professional knowledge of agriculture under the background of rural revitalization. The new type of professional farmers is of great significance for accelerating agricultural modernization and promoting the construction of a powerful modern socialist country. In the process of cultivating new types of professional farmers in rural areas, it is necessary to break through the previous informatization constraints of poor information flow, and give full play to the role of advanced information technology to promote the sustainable economic development. This paper proposes a new type of professional farmer cultivation platform based on edge computing architecture to improve the cultivation efficiency of new type of professional farmers, so as to better promote the development of rural informatization. Aiming at the challenges of energy consumption under the edge platform architecture, this paper proposes a dynamic scheduling method for semi‐online tasks for edge computing platforms. In order to evaluate the effectiveness of the algorithm, the method in this paper is compared with the classic scheduling algorithm, and simulated and verified on the CloudSim platform. Experimental results show that the proposed method outperforms other algorithms in the task completion time metric. With the expansion of task scale, more energy consumption can be saved by using the algorithm proposed in this paper. [ABSTRACT FROM AUTHOR]

Multi-intelligent vehicles forming and maintaining a specific formation during traveling can save energy consumption and road resources, and improve traffic efficiency and driving safety. Centered around the Cooperative Vehicle Infrastructure(CVI) framework of the Internet of Vehicles(IOV), this paper delves into the control objectives of forming multi-intelligent vehicle formation, explores the theory of formation shaping process, and investigates the optimization of energy consumption in the formation shaping process. First, the clustering design is used to take the kinematic process of vehicles as an optimization process from the bionics, taking the instantaneous consumption indexes as the optimization objectives. Then, optimize the acceleration inputs of the vehicle formation process using the improved Artificial Fish Swarm Algorithm(AFSA), and iterate with the clustering algorithm part, so as to realize the formation shaping process with energy consumption as the optimization objective. Finally, ajoint simulation platform built by Simulation of Urban Mobility (SUMO) and Python is used for simulation verification, and the results show that the formation shaping process can be realized and achieve the optimal energy consumption under the scenarios proposed in this paper, thus verifying the validity of the clustering model of vehicle formation shaping and the energy consumption optimization algorithm designed in this paper. [ABSTRACT FROM AUTHOR]

With the development of energy technology, hydrogen is gradually becoming widely used. China is also rapidly developing its own hydrogen energy industry in an effort to accomplish the "dual carbon target'. Hydrogen from methane is one of the mainstream sources, of which hydrogen from methane cracking is the decomposition of methane into hydrogen and solid carbon, with the solid carbon also having a high economic value. In particular, this technology does not emit carbon dioxide, which is very friendly to the environment, but it cannot avoid larger energy consumption. In contrast, hydrogen production from methane cracking driven by solar energy not only combines the characteristics of no CO 2 emission, but also greatly reduces the consumption of primary energy, which is the future development trend of hydrogen production from methane. This paper provides a brief overview of the various technological pathways for methane to hydrogen production in the context of China's actual development, focusing on the current status of the development and application of solar methane cracking to hydrogen production technologies at home and abroad. Among them, this paper mainly discusses the characteristics of solar reactors of different sizes and structures, and summarizes the results of related optimization studies. Meanwhile, the application of catalysts in solar reactors and the problem of carbon deposition are analyzed, and the practical application of solar methane cracking hydrogen production system is outlined. Finally, the future development of solar methane cracking hydrogen production technology is prospected from the national situation of China. [Display omitted] • Solar methane cracking for hydrogen can reduce emissions and energy consumption. • The current state of research on solar reactors is summarized. • Solar methane cracking requires higher performing catalysts. • Providing insights into the future development of solar methane cracking in China. [ABSTRACT FROM AUTHOR]

In this paper, a proper noun “Region” is used for nm‐scale n‐type dopant‐rich region in p‐type Si crystal. Using this Region, certain solar cells have been assumed. By resonance absorption between photon energy and potential barrier of the Region, the cell can absorb most photons for visible light frequency without passing loss or thermal loss. This light absorption mechanism is different from conventional band gap absorption. Despite this benefit, output voltage is anticipated to decline according to the principle of detail balance. To control the decline, two methods are proposed in this paper. Theoretical energy conversion efficiencies for several cases are calculated with an ideal condition. The calculation result is over 70% as a theoretical value. [ABSTRACT FROM AUTHOR]

Fuel cell electric buses (FCBs) have proven to be a technically viable solution for transportation, owing to various advantages, such as reliability, simplicity, better energy efficiency, and quietness of operation. However, large-scale adoption of FCBs is hindered by the lack of extensive and structured infrastructure and the high cost of clean hydrogen. Many studies agree that one of the significant contributors to the lack of competitiveness of green hydrogen is the cost of electricity for its production, followed by transportation costs. On the one hand, to reduce the investment cost of the electrolyzer, high operating hours should be achieved; on the other, as the number of operating hours decreases, the impact of the electricity costs declines. This paper presents an innovative algorithm for a scalable hydrogen refuelling station (HRS) capable of successfully matching and identifying the most cost-efficient levelized cost of hydrogen (LCOH) produced via electrolysis and connected to the grid, based on the HRS components' cost curves and the hourly average electricity price profile. The objective is to identify the least-cost range of LCOH by considering both the electric energy and the investment costs associated with a hydrogen demand given by different FCB sizes and electrolyzer rated powers. In addition, sensitivity analyses have been conducted to quantify the technology cost margins, and a cost comparison between the refuelling of an FCB fleet and the recharging infrastructure required for an equivalent fleet of Battery Electric Buse (BEB) has been performed. An LCOH of around 10.5 €/kg varying from 12 €/kg (2 FCB) to 10.2 €/kg (30 FCB) has been found for the best-optimized configurations. The final major conclusion of this paper is that FCB technology is currently not economically competitive. Still, a cost contraction of the electric energy price and the electrolyzer capital investment would lead to a 50% decrease in the LCOH. Furthermore, increasing renewable energies into the grid may shift the electricity cost curve, resulting in higher prices when the BEB recharging demand is more significant. This impact, in addition to the peak power load and longer recharging times, might contribute to bridging the gap with FCBs. • Techno-economic model for the sizing of an HRS with grid-connected electrolyzer. • The widespread diffusion of H2 technology in mobility needs both reliability and cost-effectiveness. • Investigation of various electrolysers rated powers and fuel cell buses fleet size. • An action on both CAPEX and OPEX would lead to potential cost margins improvement. • It is found that the best configuration that balances the CAPEX and OPEX coincides with an LCOH ranging from 12 to 10 €/kg. [ABSTRACT FROM AUTHOR]

The European Union, in pursuit of the goal of reducing emissions by at least 55% by 2030 and achieving climate neutrality by 2050, is deploying different actions, with industry decarbonization as a key strategy. However, increasing electricity demand requires an intensification of energy generation from clean technologies, and the energy system's expansion is hindered by renewable generation's climatic dependencies and the imperative for substantial electrical infrastructure investments. Although the transmission grid is expected to grow, flexibility mechanisms and innovative technologies need to be applied to avoid an overwhelming growth. In this context, this paper presents a thorough assessment, conducted within the FLEXINDUSTRIES project, of the flexibility potential across seven energy-intensive industries (automotive industry, biofuel production, polymer manufacturing, steel manufacturing, paper mills, pharmaceutical industry, and cement production). The methodology followed during the analysis entails reviewing the state-of-the-art existing flexibility mechanisms, industries' energy markets engagement, and technical/operational readiness. The results highlight the feasibility of the proposed actions for enabling energy market flexibility through demand-response programs, quantifying energy opportunities, and pinpointing regulatory and technical barriers. [ABSTRACT FROM AUTHOR]

With the increasing use of renewable energy sources and decentralized power systems, certain challenges have emerged in meeting consumers' electrical energy demands. The intermittent nature of renewable energy generation means that it cannot always align with consumers' needs, resulting in periods of excess energy production when it is not required. To bridge this gap between production and consumption, energy storage systems are necessary. This paper defines the work of an isolated microgrid, which consists of renewable sources (wind and PV) for energy production, households with electric vehicles as consumers, and a combined storage system. This storage system is made from batteries, hydrogen storage, and a control system that defines the best use of the storage. Stored energy is utilized through fuel cells to generate electricity for consumption when renewable sources cannot meet the demand. This paper presents the principles of electrolysis and models of individual elements within such a system, as well as the definition and principle of control of the system functionality based on rules and conditions. The proposed control system aims to increase the energy storage lifecycle by deciding when and how to utilize which type of storage and define a self-sufficient microgrid based on renewable sources of production. An economic analysis of the storage part of the system was carried out in which the levelized cost of energy stored and the NPC of the storage systems are calculated. A simulation of the system's operation is conducted using one-hour measurements of wind turbines, solar panels, and household consumption in Serbia. To analyze the system's behavior, a one-week time horizon is considered. [ABSTRACT FROM AUTHOR]