Search

Due to natural and anthropogenic disturbances, natural gas hydrates with morphologies of nodules and chunks dissociate and release massive free gas, creating large cavities within fine-grained marine sediments. However, it is still a challenge to quantify the impact of gas cavities on mechanical properties of cavitied fine-grained marine sediments as there is a lack of efforts focusing on the inner structure visualization. In this study, an oedometer test and X-ray computed tomography scans are jointly conducted on marine clayey silt with gas cavities, and the confined compressibility as well as the inner structure change under an undrained condition are explored, followed by development of a theoretical model depicting the void ratio change. The results show that vertical loading induces a void ratio reduction, and the reduced void ratio can fully recover after being unloaded. Although being fully recovered, unrecovered changes of the inner structure still remain after being unloaded. Examples include closed cracks in the lower matrix, new occurring cracks in the upper matrix, and the fragmented gas cavity. In addition, the void ratio linearly increases with the increasing inverse of normalized pore gas pressure, while the coefficient of the effective stress linearly decreases with the increasing inverse of normalized vertical loading stress. The proposed theoretical model captures the essential physics behind undrained confined deformation of fine-grained marine sediments with gas cavities when subjected to loading and unloading. [ABSTRACT FROM AUTHOR]

Several trial productions have been conducted on marine natural gas hydrate reservoirs, demonstrating its enormous potential as an alternative energy source. Nonetheless, sustained and efficient production still remains challenging, with crucial issues on low gas production efficiency and blockages. The large amount of hydrate decomposition and resulting heat absorption can lead to prolonged subzero conditions close to the well; this can readily induce ice formation and blockage. This study aims to investigate the issue of ice blockages caused by insufficient energy supply during the recovery process. A systematic analysis of the energy consumption and ice blockage quantification at each stage of the traditional multi-stage direct depressurization and constant speed depressurization methods is conducted. A hybrid optimized scheme is proposed, which enhances energy utilization efficiency by appropriately utilizing reservoir sensible heat during the initial stage of production. Additionally, a multi-stage constant speed depressurization method is introduced in the later stages to mitigate production fluctuations and reduce blockage duration. Results showed a 69.5 % increase in energy efficiency and an average 67.1 % decline in gas blockage duration with comparable gas productivity. The proposed method could be a viable solution to mitigate challenges of icing blockages and fluctuating production during trial tests of marine hydrate reservoirs, achieving improved energy efficiency and sustainable production. • Ice blockage in hydrate reservoirs reduced production efficiency during direct and constant-speed depressurization methods. • Proposed a hybrid method to address gas production fluctuations caused by ice blockage through energy consumption analysis. • Multi-stage analysis revealed 70% energy efficiency improvement and 67% reduced ice blockage duration with the hybrid method. [ABSTRACT FROM AUTHOR]

Natural gas hydrates are a potential future energy modality with the advantages of clean burning and large resource reserves and have attracted worldwide attention. Natural gas hydrates formation and dissociation impact the skeletal structure and mechanical properties of porous media sediments. In addition, there is a synergistic effect between the migration of fine clay particles in porous media and hydrate behavior. In this study, methane hydrate was examined in-situ using a low-field nuclear magnetic resonance system in the presence of two suspensions of clay particles with different stability. The results showed that clay particles impacted methane hydrate formation and dissociation and the pore structure of porous media. Hydrate nucleated preferentially in large pores, causing them to split into smaller pores; the presence of clay particles, especially illite, improved the water conversion rate. The results indicated that water content in large pores increased after hydrate dissociation but was discontinuous among different pores. When illite was present, the distribution was more continuous; when montmorillonite was present, the water distribution of the large pores was similar to that of the original state. This work increases our understanding of the kinetics, water migration, and pore structure alteration of methane hydrate formation and dissociation in sediments with clay particles and provides support for the safe and efficient development of natural gas hydrates. • Clay particles impacted methane hydrate formation and dissociation • Hydrate nucleated preferentially in large pores • Clay particles, especially illite, improved the water conversion rate • Water content in large pores increased after hydrate dissociation but was discontinuous among different pores [ABSTRACT FROM AUTHOR]

• A new hydrate formation promoter was selected for methane storage. • The R141b was confirmed to improve the equilibrium condition of methane hydrate. • Thermodynamic characteristics of mixture hydrate was analysed. • Mechanism of mixture hydrate nucleation was proposed. • Gas storage procedure was optimized. Solidified natural gas is a promising alternative for improving natural gas storage owing to its safe and environmentally friendly properties. However, harsh conditions limit its application. In this study, the R141b was used as a thermodynamic promoter to enhance methane hydrate formation under mild conditions. Addition of R141b to the water system significantly shifted the phase equilibrium boundary to lower pressures and higher temperatures, in which the R141b-CH 4 hydrate can be formed at 0.1 MPa and 287.2 K. Notably, the final pressure of the cell after hydrate formation was near the atmospheric pressure even at an initial pressure of 5.384 MPa, suggesting that the R141b-CH 4 mixed hydrate had milder storage conditions and lower costs than liquefied natural gas (approximately 110 K). The higher initial pressure significantly reduces the induction time and increases gas storage. The mechanism of unusual kinetic characteristics of the R141b-CH 4 hydrates that were observed can be attributed to the different nucleation behaviour of CH 4 , R141b, and R141b-CH 4 hydrates. This study provides evidence of a new promoter using the solid hydrate method under mild conditions that can be alternatively used for the storage and transport of natural gas, thereby increasing the supply of clean energy without the high economic costs and safety issues. [ABSTRACT FROM AUTHOR]

• The long-term joint production from hydrate and shallow gas layer provides a 4.1 times enhancement of the cumulative gas yield. • The regulated layer-dependent scheme effectively alleviated the interbedded pressure difference by ∼70%, avoiding the interlayer instability. • An energy return on investment (EROI) analysis was carried out to evaluated the optimized joint production method. Recent field tests to recover natural gas from marine gas hydrate reservoirs in Japan and China have exhibited worldwide attention to this strategic energy form; significant challenges still remain in improving the accumulative gas yield for a better economic efficiency. According to the geological survey in marine hydrate reservoirs, there exists a concomitant free gas layer underlying the gas hydrate reservoir. Consequently, here we propose a new scheme to jointly produce the gases from hydrate layer and its underlying shallow gas layer. It was found that a dual horizontal well deployment respectively in the corresponding two layers could contribute to a 4.1 times cumulative gas yield comparing that of a single vertical well scenario. This implies a remarkable enhancement of gas productivity via making full use of the gases in the shallow gas layer. Notably, a potential risk of interlayer failure could occur upon the great interbedded pressure difference (maximum 10.7 MPa) arising from the varying behavior of pressure propagation in the layers. This can be effectively alleviated by separately controlling the depressurization scheme in different layers; a mild step-wise depressurization was suggested in the more permeable shallow gas layer while the hydrate layer with a lower permeability should experience a sharper pressure drop. This was found beneficial reducing the interbedded pressure difference by about 70% without intervening the gas production. An energy return on investment (EROI) analysis showed a promising positive energy harvest of our optimized layer-dependent pressure scheme. It could be therefore a potential method to be applied in the field tests in the South China Sea to improve the economic efficiency without disturbing the reservoir stability. [ABSTRACT FROM AUTHOR]