Search

The turbulent flow of binary hybrid nano-oils is investigated and Nusselt number correlation is developed for futuristic concentrated solar thermal application. Available Nusselt number correlations for water-based hybrid nanofluids are nanoparticle-specific property correlations dependent and substantially over-predict the values for hybrid nano-oils. Therefore, a generalized Nusselt number correlation for turbulent flow of water and oil-based binary hybrid nanofluids is deduced using the separation approach. Dissimilar to the available correlations, the developed correlation needs only the thermophysical properties of base fluid and nanoparticles. It is valid for the Reynolds number range 10,000-30,000 and the Prandtl number range 0.5-2000. It is found that the proposed correlation predicts the published experimental values for different hybrid nanofluids mostly within ±10-20%. Computational fluid dynamics simulation is also performed for turbulent flow of different hybrid nano-oils to assess the developed correlation. The comparative assessment also confirms that the developed correlation predicts the numerical values for hybrid nano-oils within ±10-20%. The deduced Nusselt number correlation will be useful for a realistic heat transfer analysis with different water or oil-based hybrid nanofluids. The need for experiments with different hybrid nano-oils is realized for further improvement. [ABSTRACT FROM AUTHOR]

• A multi-zone model for unsteady heat transfer is proposed for an open volumetric air receiver. • The model includes all the modes of heat transfer in receiver internals. • Detailed investigations are performed to identify the important parameters. • Recommendations are made for the scale-up receiver design. A comprehensive, multi-zone, unsteady heat transfer model is developed for a straight absorber pore-based open volumetric air receiver. This includes heat exchange between the porous absorbers, absorbers and receiver casing, and absorbers and return air. The validation revealed its predictive capability within an uncertainty of ±7%. The model is used for the scale-up of receiver design with several intermediate absorber layers. The major recommendations for scale-up are a) multiple absorber layers is beneficial for mitigating thermal stress, b) higher flux concentration is required for non-volumetric heating, to achieve the desired air temperature, compared to volumetric heating, c) air return ratio should be 0.6, d) absorber porosity should be 0.6 for volumetric heating and higher for non-volumetric heating, e) absorber gap to length ratio should be 0.15 -0.25, f) the radiative heat loss is substantial for non-volumetric heating; therefore, the exposed surface area to ambient should be reduced, and g) absorber diameter to length ratio should be 1-2. The developed approach is generic and adaptable for the different open volumetric air receiver designs. [ABSTRACT FROM AUTHOR]