Search

Reconfigurable robots are deployed for applications demanding area coverage, such as cleaning and inspections. Reconfiguration per context, considering beyond a small set of predefined shapes, is crucial for area coverage performance. However, the existing area coverage methods of reconfigurable robots are not always effective and require improvements for ascertaining the intended goal. Therefore, this article proposes a novel coverage strategy based on internal rehearsals to improve the area coverage performance of a reconfigurable robot. In this regard, a reconfigurable robot is embodied with the cognitive ability to predict the outcomes of its actions before executing them. A genetic algorithm uses the results of the internal rehearsals to determine a set of the robot's coverage parameters, including positioning, heading, and reconfiguration, to maximize coverage in an obstacle cluster encountered by the robot. The experimental results confirm that the proposed method can significantly improve the area coverage performance of a reconfigurable robot. [ABSTRACT FROM AUTHOR]

Cleaning is a fundamental routine task in human life that is now handed over to leading-edge technologies such as robotics and artificial intelligence. Various floor-cleaning robots have been developed with different cleaning functionalities, such as vacuuming and scrubbing. However, failures can occur when a robot tries to clean an incompatible dirt type. These situations will not only reduce the efficiency of the robot but also impose severe damage to the robots. Therefore, developing effective methods to classify the cleaning tasks performed in different regions and assign them to the respective cleaning agent has become a trending research domain. This article proposes a vision-based system that employs YOLOv5 and DeepSORT algorithms to detect and classify dirt to create a dirt distribution map that indicates the regions to be assigned for different cleaning requirements. This map would be useful for a collaborative cleaning framework for deploying each cleaning robot to its respective region to achieve an uninterrupted and energy-efficient operation. The proposed method can be executed with any mobile robot and on any surface and dirt, achieving high accuracy of 81.0%, for dirt indication in the dirt distribution map. [ABSTRACT FROM AUTHOR]

Area coverage is a crucial factor for a robot intended for applications such as floor cleaning, disinfection, and inspection. Robots with fixed shapes could not realize an adequate level of area coverage performance. Reconfigurable robots have been introduced to overcome the limitations of fixed-shape robots, such as accessing narrow spaces and cover obstacles. Although state-of-the-art reconfigurable robots used for coverage applications are capable of shape-changing for improving the area coverage, the reconfiguration is limited to a few predefined shapes. It has been proven that the ability of reconfiguration beyond a few shapes can significantly improve the area coverage performance of a reconfigurable robot. In this regard, this paper proposes a novel robot model and a low-level controller that can facilitate the reconfiguration beyond a small set of predefined shapes and locomotion per instructions while firmly maintaining the shape. A prototype of a robot that facilitates the aim mentioned above has been designed and developed. The proposed robot model and controller have been integrated into the prototype, and experiments have been conducted considering various reconfiguration and locomotion scenarios. Experimental results confirm the validity of the proposed model and controller during reconfiguration and locomotion of the robot. Moreover, the applicability of the proposed model and controller for achieving high-level autonomous capabilities has been proven. [ABSTRACT FROM AUTHOR]

Robot-aided cleaning auditing is pioneering research that uses autonomous robots to assess a region's cleanliness level by analyzing the dirt samples collected from various locations. Since the dirt sample gathering process is more challenging, adapting a coverage planning strategy from a similar domain for cleaning is non-viable. Alternatively, a path planning approach to gathering dirt samples selectively at locations with a high likelihood of dirt accumulation is more feasible. This work presents a first-of-its-kind dirt sample gathering strategy for the cleaning auditing robots by combining the geometrical feature extraction and swarm algorithms. This combined approach generates an efficient optimal path covering all the identified dirt locations for efficient cleaning auditing. Besides being the foundational effort for cleaning audit, a path planning approach considering the geometric signatures that contribute to the dirt accumulation of a region has not been device so far. The proposed approach is validated systematically through experiment trials. The geometrical feature extraction-based dirt location identification method successfully identified dirt accumulated locations in our post-cleaning analysis as part of the experiment trials. The path generation strategies are validated in a real-world environment using an in-house developed cleaning auditing robot BELUGA. From the experiments conducted, the ant colony optimization algorithm generated the best cleaning auditing path with less travel distance, exploration time, and energy usage. [ABSTRACT FROM AUTHOR]

Mobile robots are deployed in the built environment at increasing rates. However, lack of considerations for a robot-inclusive planning has led to physical spaces that would potentially pose hazards to robots, and contribute to an overall productivity decline for mobile service robots. This research proposes the use of an adapted Failure Mode and Effects Analysis (FMEA) as a structured tool to evaluate a building's level of robot-inclusivity and safety for service robot deployments. This Robot-Inclusive FMEA (RIFMEA) framework, is used to identify failures in the built environment that compromise the workflow of service robots, assess their effects and causes, and provide recommended actions to alleviate these problems. The method was supported with a case study of deploying telepresence robots in a university campus. The study concluded that common failures were related to poor furniture design, a lack of clearance and hazard indicators, and sub-optimal interior planning. [ABSTRACT FROM AUTHOR]

Frequent inspections are essential for drains to maintain proper function to ensure public health and safety. Robots have been developed to aid the drain inspection process. However, existing robots designed for drain inspection require improvements in their design and autonomy. This paper proposes a novel design of a drain inspection robot named Raptor. The robot has been designed with a manually reconfigurable wheel axle mechanism, which allows the change of ground clearance height. Design aspects of the robot, such as mechanical design, control architecture and autonomy functions, are comprehensively described in the paper, and insights are included. Maintaining the robot's position in the middle of a drain when moving along the drain is essential for the inspection process. Thus, a fuzzy logic controller has been introduced to the robot to cater to this demand. Experiments have been conducted by deploying a prototype of the design to drain environments considering a set of diverse test scenarios. Experiment results show that the proposed controller effectively maintains the robot in the middle of a drain while moving along the drain. Therefore, the proposed robot design and the controller would be helpful in improving the productivity of robot-aided inspection of drains. [ABSTRACT FROM AUTHOR]

Frequent inspections are essential for false ceilings to maintain the service infrastructures, such as mechanical, electrical, and plumbing, and the structure of false ceilings. Human-labor-based conventional inspection procedures for false ceilings suffer many shortcomings, including safety concerns. Thus, robot-aided solutions are demanded for false ceiling inspections similar to other building maintenance services. However, less work has been conducted on developing robot-aided solutions for false ceiling inspections. This paper proposes a novel design for a robot intended for false ceiling inspections named Falcon. The compact size and the tracked wheel design of the robot allow it to traverse obstacles such as runners and lighting fixtures. The robot's ability to autonomously follow the perimeter of a false ceiling can improve the productivity of the inspection process since the heading of the robot often changes due to the nature of the terrain, and continuous heading correction is an overhead for a teleoperator. Therefore, a Perimeter-Following Controller (PFC) based on fuzzy logic was integrated into the robot. Experimental results obtained by deploying a prototype of the robot design to a false ceiling testbed confirmed the effectiveness of the proposed PFC in perimeter following and the robot's features, such as the ability to traverse on runners and fixtures in a false ceiling. [ABSTRACT FROM AUTHOR]