Search

Combining molecular imprinting technology with electrostatic spinning technology, a molecularly imprinted nanofiber membrane material with memory and recognition of specific imprinted molecules is thus produced. It has the advantages of high efficiency, reusability, easy amplification, and simple operation. In this study, alkane molecularly imprinted nanofibrous membranes are prepared as a carrier for immobilize Bacillus cereus LY‐1 for the degradation of diesel in oil–water system. The adsorption capacity of the molecularly imprinted material for diesel oil with n‐decyl alcohol as the template molecule reach 120.25 mg g−1, the adsorption capacity of alkane molecularly imprint nanofiber membrane prepared using polyvinyl alcohol (PVA) as the membrane substrate material is 41.37 mg g−1. After 4 days, the immobilized LY‐1 cells eliminate roughly 80.7% of the diesel at a starting concentration of 3 g L−1. The results show that imprinted structures in MINM enhance degradation by loaded microorganisms. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) are a potential biotechnology for simultaneous degradation of organic wastewater and power generation. In this paper, a biocompatible composite is constructed around a copper mesh with sodium alginate/agar and activated carbon (CM‐SA/AC) and acts as an efficient anode for MFCs after being microbe immobilized. The power performance of the MFC with CM‐SA/AC anode is investigated. The results show that the addition of activated carbon is conducive to the immobilization of bacteria on CM‐SA/AC anode and fast start‐up of MFCs. The power density reaches 1088.6 mW/m2, which is 2.03 times and 1.75 times that of CM‐SA (without activated carbon) anode and carbon felt anode, respectively. In case of a candied wastewater treatment, the MFC with immobilized CM‐SA/AC anode exhibits a much higher power density (724.5 mW/m2) than that with carbon felt anode (145.0 mW/m2), together with a longer stabilization time and a smaller charge‐transfer resistance. The total removal rate of chemical oxygen demand (COD) reaches 79.4 ± 0.65%. The present study will facilitate the development of inexpensive and biocompatible anodes to facilitate the application of MFCs in wastewater treatment. [ABSTRACT FROM AUTHOR]

As the core component of wearable electronic devices, flexible energy storage materials play an irreplaceable role. At present, it is still a challenge to prepare flexible electrode materials with high energy density. In this paper, a polyaniline‐based composite flexible conductive hydrogel (PPG‐P) with a two‐level conductive network is successfully prepared by a secondary induced assembly in situ polymerization method. The special conductive structure greatly promotes the efficiency of charge transfer and the utilization of electroactive substances, so that PPG‐P exhibits excellent electrochemical performance. In a three‐electrode system, PPG‐P has a mass‐specific capacitance as high as 989 F g−1 (0.5 A g−1). After 1000 charge and discharge cycles, the capacitance retention is 87%. Symmetrical flexible supercapacitors based on PPG‐P have high specific capacitance (176 F g−1/0.5 A g−1) and high energy density (15.6 Wh kg−1). After 1000 cycles of constant current charge and discharge, the capacitance maintains 78.1%. The preparation of PPG‐P with a hierarchical structure demonstrates the possibility of achieving high energy density in flexible electrode materials, which has great application potential in the development of energy storage elements in wearable devices. [ABSTRACT FROM AUTHOR]

A strain of Lysinibacillus sp . , named as Y316, can degrade heavy fractions such as resins and asphaltenes in oil sand. We used Y316 to degrade oil sand samples for 35 days. After bacterial degradation, the oil sand degradation efficiency was 5.88%, while the degradation efficiency of the control group was only 0.29% under the same conditions. Compared with the control group, the saturated content of oil sand in the degradation group increased from 9.56 to 14.39%. After degradation, the resin and asphaltene fractions decreased by 5.34 and 4.77%, respectively. The results of the vaporizable fraction analysis also confirmed the degradation of heavy fractions and the formation of light fractions. After 35 days of degradation, the vaporizable fractions of saturates increased by 3.76 times. The results indicate that Y316 has great significance for improving the quality of oil sands and assisting in oil sand exploitation., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)