Search

The adoption of 2D transition metal dichalcogenide (TMD) based optoelectronic devices is limited by Fermi level pinning effects and consequent large contact resistances upon contacting TMDs with bulk metal electrodes. A potential solution for near‐ideal Schottky–Mott behavior and concomitant Schottky barrier height control is proposed by contacting TMDs and (semi‐)metals in van der Waals heterostructures. However, measurement approaches to directly assess interface parameters relevant to the Schottky–Mott rule on a local scale are still lacking. In the present work, a heterostructure of monolayer tungsten diselenide (WSe2) with monolayer graphene (1LG) and bilayer graphene (2LG) is investigated on a bottom‐gate substrate. Kelvin probe force microscopy and tip‐enhanced photoluminescence measurements at different electrostatic doping induced Fermi levels in graphene enable decoupling and quantification of contributions from the interface dipole and electrode work function. These are used to locally probe Schottky barrier characteristics with below 32 nm lateral resolution, demonstrating that the WSe2/1LG junction operates at the Schottky–Mott limit (S ≈ 1). At the WSe2/2LG junction, a reduction of the interface dipole is directly related to changes in excitonic emission properties. These are attributed to charge transfer modulation across the interface, critical for obtaining high‐performance transfer characteristics in transistors and related devices. [ABSTRACT FROM AUTHOR]

Curved X‐ray detectors have the potential to revolutionize diverse sectors due to benefits such as reduced image distortion and vignetting compared to their planar counterparts. While the use of inorganic semiconductors for curved detectors are restricted by their brittle nature, organic–inorganic hybrid semiconductors which incorporated bismuth oxide nanoparticles in an organic bulk heterojunction consisting of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) and [6,6]‐phenyl C71 butyric acid methyl ester (PC70BM) are considered to be more promising in this regard. However, the influence of the P3HT molecular weight on the mechanical stability of curved, thick X‐ray detectors remains less well understood. Herein, high P3HT molecular weights (>40 kDa) are identified to allow increased intermolecular bonding and chain entanglements, resulting in X‐ray detectors that can be curved to a radius as low as 1.3 mm with low deviation in X‐ray response under 100 repeated bending cycles while maintaining an industry‐standard dark current of <1 pA mm−2 and a sensitivity of ≈ 0.17 μC Gy−1 cm−2. This study identifies a crucial missing link in the development of curved detectors, namely the importance of the molecular weight of the polymer semiconductors used. [ABSTRACT FROM AUTHOR]

Organic‐inorganic hybrid semiconductors are an emerging class of materials for direct conversion X‐ray detection due to attractive characteristics such as high sensitivity and the potential to form conformal detectors. However, existing hybrid semiconductor X‐ray detectors display dark currents that are 1000–10 000× higher than industrially relevant values of 1–10 pA mm−2. Herein, ultra‐low dark currents of <10 pA mm−2, under electric fields as high as ≈4 V µm−1, for hybrid X‐ray detectors consisting of bismuth oxide nanoparticles (for enhanced X‐ray attenuation) incorporated into an organic bulk heterojunction consisting of p‐type Poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) and n‐type [6,6]‐Phenyl C71 butyric acid methyl ester (PC70BM) are reported. Such ultra‐low dark currents are realized through the enrichment of the hole selective p‐type organic semiconductor near the anode contact. The resulting detectors demonstrate broadband X‐ray response including an exceptionally high sensitivity of ≈1.5 mC Gy−1 cm−2 and <6% variation in angular dependence response under 6 MV hard X‐rays. The above characteristics in combination with excellent dose linearity, dose rate linearity, and reproducibility over a broad energy range enable these detectors to be developed for medical and industrial applications. [ABSTRACT FROM AUTHOR]