Search

The production of biofuels (e.g., ethanol and biodiesel) requires a significant amount of water during feedstock production, transportation, and its conversion into biofuels. Therefore present study devoted to study the impact of biofuel production on water demand in Alberta. In scenario #1, it is assumed that ethanol is produced from both wheat and wheat straw and that biodiesel is produced from rapeseed. Scenario #2 proposes ethanol production from wheat only and biodiesel production from rapeseed. The water requirements for biofuel production in both scenarios are calculated for Alberta for the year 2025. Data on the current availability of water in Alberta indicate that the Athabasca, North Saskatchewan, and Peace River basins of northern Alberta have enough water to grow crops for the production of biofuels. In 2025, Alberta will have to produce 3,754 million liters of ethanol and 270 million liters of biodiesel to meet the projected levels. If biofuels are produced from the crops grown in the abovementioned northern river basins, the province of Alberta should be able to meet biofuel demand in 2025 sustainably. The water requirement from these river basins for biofuel production will increase to 5.2%, 0.6%, and 11.6%, respectively, of the natural flow in scenario #1 whereas, for scenario #2, the water requirement from these rivers basins will increase to 5.2%, 2.3%, and 16.1%, respectively, of natural flow. These increases in the requirements are much lower than the possible allowed withdrawal levels. [ABSTRACT FROM AUTHOR]

Abstract: Biomass is a geographically dependent renewable resource which can be used for production of fuels and chemicals. This study develops a methodology for determining the suitable locations, optimal sizes and number of biomass-based facilities for a particular region through transport cost optimization which is applied for locating pellet plants in the Province of Alberta. The methodology also includes computation of local optimal size and cost of pellet production considering road network and spatially varied biomass. Different constraints and environmental factors for siting biomass-based facilities are analyzed to derive a land suitability model. Based on location–allocation model, 13 plants could be built in the Province of Alberta with transportation costs in the range of $21–33per tonne. The locally determined unit costs of pellet plants vary within $108–121 with optimal plant capacities of 150,000–250,000tonnes per year. [Copyright &y& Elsevier]

This study developed a novel assessment framework to analyze long-term energy transition in the road transport sector in which various technology options, market shares, policy measures, costs, and greenhouse gas emissions are considered in a single framework analysis. A data-intensive model was developed with the Low Emissions Analysis Platform (LEAP) and used to analyze policy scenarios up to 2050 for Alberta, Canada, a hydrocarbon-rich province with an emission-intensive energy sector. Three key policy measures – carbon pricing, zero-emission vehicle sales mandate, and incentivization – were analyzed in nine individual and combined policy scenarios. The transition to both hydrogen fuel cell electric vehicles and battery electric vehicles was assessed for all vehicle categories. Each fuel's full energy supply chain was modelled, including resource extraction, conversion, transmission and distribution, and fuelling, allowing for final and primary energy analysis. The findings show that carbon price and zero-emission vehicle incentives do not effectively lower greenhouse gas emissions on their own; zero-emission vehicle mandates are needed to transition the sector to a low-carbon energy system. The system-wide greenhouse gas emission footprints of hydrogen and battery electric vehicles are significantly below conventional vehicles in all cases. Scenarios biased towards battery electric vehicles had the most favorable results. The greenhouse gas emission footprint of hydrogen vehicles supplied by auto-thermal reforming with 91% carbon capture was lower than for battery electric vehicles powered by a primarily natural gas-based power grid. The findings on the effectiveness of carbon prices, incentives, and vehicle mandates should be considered by government policymakers aiming to reduce greenhouse gas emissions, infrastructure planners, and other energy stakeholders. [Display omitted] • Assessment of H 2 -FCEVs and BEVs for system-wide energy and emissions. • Impact of carbon price, ZEV sales mandate, and ZEV incentives analyzed up to 2050. • Evaluation of hydrogen production technologies including SMR and ATR with CCS. • Current policies result in 38% decline in system-wide emissions in 2050. • ZEV sales mandate is the most effective in reducing system-wide energy & emissions. [ABSTRACT FROM AUTHOR]

Waste-to-energy (WtE) is one of the municipal solid waste (MSW) management pathways that can reduce waste volumes while recovering energy. There has been considerable focus on using MSW for energy production; however, there are few integrated assessments of the optimal location and scale of the conversion of MSW to energy. This research develops a novel framework that integrates the analysis of candidate sites for MSW gasification facilities using a geographical information system (GIS) through a multi-criterion decision-making (MCDM) model with a mixed-integer linear programming (MILP) model to determine optimal scale and location. The most suitable candidate locations were identified through a GIS-based location-allocation analysis. A MILP model integrated with GIS was then used to determine the minimum per-unit electricity production costs by optimizing the numbers, locations, and sizes of the proposed WtE and preprocessing facilities. The key inputs to the optimization model are actual road and railway transportation distances, WtE gasification and preprocessing facility capital and installation costs, operation and maintenance costs, gate fee and tipping fees (the fee for disposal of ash at the landfill), and the municipal guidelines. The proposed integrated framework was applied in a case study for Alberta, a western province in Canada. The results indicate that at a 10% rate of return, electricity production is cost-competitive with current electricity prices. The per-unit cost of electricity production (COEP) was found to be only 16.14 $/MWh when the gate fee was treated as a revenue component. The optimal plant location was in Edmonton and the optimum plant size was 175 MW. Sensitivity and uncertainty analysis was conducted to understand the critical input parameters that impact the COEP. The results indicate that the COEP is most sensitive to changes in tipping fees, plant efficiency, capital cost, discount rate, and transportation cost. The developed framework is critical for investment decisions and policy development, and it can be applied globally with adjustments to data and assumptions. [Display omitted] • A novel integrated GIS-based optimization model is developed for MSW supply chain. • A GIS-based MCDM model is used to identify the candidate sites for WtE facilities. • ArcGIS network analysis is used to determine actual transportation distances. • The per unit COEP, 16.14 $/MWh, is competitive with the market price. • The proposed framework optimizes WtE facility numbers, locations, and sizes. [ABSTRACT FROM AUTHOR]

Alberta's food processing industry is the second largest food waste producer after the household sector. Most of the waste currently produced from the food processing industry is landfilled. Decomposing landfill waste, moreover, emits greenhouse gases (GHG), which contribute to global warming. In this paper, we estimated the amount of food waste produced by Alberta's food processing industry by developing a geographical information system (GIS)-based model with data from food processing companies in the province. The companies were selected such that all sizes, types, and geographic locations were considered. The information was gathered on the amount and characteristics of food waste, the location of the processing facilities, and the food waste disposal method and then the total amount of food waste generated in Alberta was estimated. In addition, GIS maps were created to show the distribution of food waste throughout the province and the availability intensity. Finally, we estimated the potential energy that could be produced in the form of biogas and electricity using Alberta's food processing waste and mapped it as well. There is a potential to generate 852 GWh of electricity per year from Alberta's food processing waste, which is about 1% of the province's total electricity generation. This potential capacity could help in the development of waste-to-value-added facilities in Alberta. [ABSTRACT FROM AUTHOR]

• Life cycle assessment of utility-scale solar energy is performed. • Upstream production and assembly are the most emission-intensive life cycle stages. • Energy use during production and plant lifetime are the most sensitive parameters. • The system shows a net energy production with a net energy ratio up to 6.6. • The life cycle GHG emissions range from 98.3 to 149.3 g CO 2 eq /kWh. Grid-connected utility-scale solar PV has emerged as a potential pathway to ensure deep decarbonization of electricity in regions with fossil fuel-dominated energy mixes. Research on utility-scale solar PV projects mainly focuses on assessing technical or economic feasibility. Environmental performance assessments of large-scale solar applications are scarce. There is limited information on the greenhouse gas (GHG) emissions and energy footprints of utility-scale solar energy systems. Earlier studies conducted on small-scale solar systems have limited application in the grid system. We developed a comprehensive bottom-up life cycle assessment model to evaluate the life cycle GHG emissions and energy profiles of utility-scale solar photovoltaic (PV) system with lithium-ion battery storage to provide a consistent electricity supply to the grid with peak load options. We conducted a case study for a fossil fuel-based energy jurisdiction, Alberta (a western province in Canada). The results of the energy assessment show that raw material extraction, production, and assembly of solar panels are the key drivers, accounting for 53% of the total consumption. Energy consumed during battery manufacturing is responsible for 28%. The system shows a net energy production with a mean net energy ratio as high as 6.6 for two-axis sun tracking orientation. The life cycle GHG emissions range from 98.3 to 149.3 g CO 2 eq /kWh with a mean value of 123.8 g CO 2 eq /kWh. The largest emissions contribution is due to the manufacturing of batteries, 54% of the total emissions. The solar PV system offers a mean energy payback time of 3.8 years (with a range of 3.3 to 4.2 years). The results are highly sensitive to the expected lifetime of the system, the panel's peak wattage, and process energy consumption at various life cycle stages. [ABSTRACT FROM AUTHOR]

The depletion of fossil fuels as well as the greenhouse gas emissions from fossil fuel use have led to growing interest in biofuel production from biomass. A new technology, thermo-catalytic reforming (TCR), is one of the contributing interests. TCR technology integrates intermediate pyrolysis with a post-reforming stage to convert biomass into a high-quality bio-oil, biochar, and syngas. In this study, experiments were carried out using three Alberta-based biomass feedstocks – hardwood pellets, softwood pellets, and chips – in a 2 kg h−1 laboratory-scale TCR plant. The results show that the composition of the biomass has little effect on product yield and quality. The TCR gases had a higher heating value of 12.5–12.8 MJ kg−1 and a hydrogen content of 13–15 vol %. The produced TCR bio-oil had low water content (~5 wt %) and a heating value of 32–34 MJ kg−1. The high quality of the bio-oil is reflected in the low O/C ratio of 0.15 and TAN of 6–15 mg KOH g−1. The TCR biochar from all three feedstocks had a high heating value and a high carbon content, as well as low O/C and H/C ratios. A parametric study was conducted for the softwood pellets to observe the effect of reformer temperature (500–700 °C) and reactor temperature (400–550 °C). It was observed that at a reformer temperature of 700 °C, the gas yield increases at the expense of a reduction in bio-oil and biochar. The optimum reactor temperature for the TCR of softwood pellets was found to be 500 °C, in terms of both bio-oil quality and yield. • Thermo-catalytic reforming (TCR) technology incorporates intermediate pyrolysis with high temperature reforming. • The TCR bio-oil had low TAN (6–15 mg KOH/g), and high HHV (32–34 MJ kg−1). • The TCR gases had a hydrogen content of 13–15 vol % and HHV of 12–14 MJ kg−1. • Higher reforming temperature led to increase in gases at the expense of bio-oil. [ABSTRACT FROM AUTHOR]

• The large-scale production pathway of high-performance perovskite solar cell modules is developed. • Scale factors were developed for each cost component of perovskite solar cells. • Perovskite solar panels for residential home application were designed. • The levelized cost of electricity is from 11.4 to 14.8 ¢/kWh. • The minimum sustainable price is $0.53-$0.9/W, comparable to commercial photovoltaic technologies. Perovskite solar cells (PSCs) have shown remarkable progress in recent years. Different materials and structures have been developed to improve the photoconversion efficiency and operational stability of PSCs. However, the economic and technical impacts of materials and design choice on the large-scale deployment are not well addressed in the literature. In this research, a pathway for producing titanium dioxide (TiO 2) nanorod-based perovskite solar modules was established and their manufacturing cost was estimated through the development of data-intensive, bottom-up techno-economic models. Material, utilities, and equipment requirements from available laboratory data to a mass production annual capacity of up to 21 MW were estimated through the development of scale factors. The minimum sustainable price and levelized cost of electricity were calculated. The direct manufacturing cost of the reference PSC module was estimated at $80.23/m2 and $0.73/W with a production capacity of 3.5 MWp. These costs decline to $47.15/m2 and $0.43/W at 21 MW production capacity. Material costs dominate the overall costs, fluorine-doped tin oxide glass being the most expensive material. The perovskite solar cell panels, when installed in residential homes in Alberta, Canada, were calculated to have a competitive levelized cost of electricity ranging from 7 to 17 cents per kWh. However, the cost was found to be extremely sensitive to the module efficiency, lifetime, and the solar insolation at the location of installation. [ABSTRACT FROM AUTHOR]