Search

With the increasing global demand for net-zero carbon emissions, actions to address climate change have gained momentum among policymakers and the public. The urgent need for a sustainable economy is underscored by the mounting waste crisis in landfills and oceans. However, the proliferation of distributed electronic devices poses a significant challenge due to the resulting electronic waste. To combat this issue, the development of sustainable and environmentally friendly materials for these devices is imperative. Cellulose, an abundant and CO2-neutral substance with a long history of diverse applications, holds great potential. By integrating electrically interactive components with cellulosic materials, innovative biobased composites have been created, enabling the fabrication of bulk electroactive paper and the establishment of new, potentially more sustainable manufacturing processes for electronic devices. This review explores recent advances in bulk electroactive paper, including the fundamental interactions between its constituents, manufacturing techniques, and large-scale applications in the field of electronics. Furthermore, it addresses the importance and challenges of scaling up production of electroactive paper, highlighting the need for further research and development. [ABSTRACT FROM AUTHOR]

The quest for eco‐friendly materials with anticipated positive impact for sustainability is crucial to achieve the UN sustainable development goals. Classical strategies of composite materials can be applied on novel nanomaterials and green materials. Besides the actual technology and applications also processing and manufacturing methods should be further advanced to make entire technology concepts sustainable. Here, they show an efficient way to combine two low‐cost materials, cellulose and zinc oxide (ZnO), to achieve novel functional and "green" materials via paper‐making processes. While cellulose is the most abundant and cost‐effective organic material extractable from nature. ZnO is cheap and known of its photocatalytic, antibacterial, and UV absorption properties. ZnO nanowires are grown directly onto cellulose fibers in water solutions and then dewatered in a process mimicking existing steps of large‐scale papermaking technology. The ZnO NW paper exhibits excellent photo‐conducting properties under simulated sunlight with good ON/OFF switching and long‐term stability (90 minutes). It also acts as an efficient photocatalyst for hydrogen peroxide (H2O2) generation (5.7 × 10−9 m s−1) with an envision the possibility of using it in buildings to enable large surfaces to spontaneously produce H2O2 at its outer surface. Such technology promise for fast degradation of microorganisms to suppress the spreading of diseases. [ABSTRACT FROM AUTHOR]

The nature of mass transport in plants has recently inspired the development of low-cost and sustainable wood-based electronics. Herein, we report a wood electrochemical transistor (WECT) where all three electrodes are fully made of conductive wood (CW). The CW is prepared using a two-step strategy of wood delignification followed by wood amalgamation with a mixed electron-ion conducting polymer, poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT:PSS). The modified wood has an electrical conductivity of up to 69 Sm-1 induced by the formation of PEDOT:PSS microstructures inside the wood 3D scaffold. CW is then used to fabricate the WECT, which is capable of modulating an electrical current in a porous and thick transistor channel (1 mm) with an on/off ratio of 50. The device shows a good response to gate voltage modulation and exhibits dynamic switching properties similar to those of an organic electrochemical transistor. This wood-based device and the proposed working principle demonstrate the possibility to incorporate active electronic functionality into the wood, suggesting different types of bio-based electronic devices. [ABSTRACT FROM AUTHOR]

To address the rising need of sustainable solutions in electronic devices, the development of electronically conductive composites based on lightweight but mechanically strong wood structures is highly desirable. Here, a facile approach for the fabrication of highly conductive wood/polypyrrole composites through top‐down modification of native lignin followed by polymerization of pyrrole in wood cell wall. By sodium sulfite treatment under neutral condition, sulfonated wood veneers with increased porosity but well‐preserved cell wall structure containing native lignin and lignosulfonates are obtained. The wood structure has a content of sulfonic groups up to 343 µmol g−1 owing to in situ sulfonated lignin which facilitates subsequent oxidative polymerization of pyrrole, achieving a weight gain of polypyrrole as high as 35 wt%. The lignosulfonates in the wood structure act as dopant and stabilizer for the synthesized polypyrrole. The composite reaches a high conductivity of 186 S m−1 and a specific pseudocapacitance of 1.71 F cm−2 at the current density of 8.0 mA cm−2. These results indicate that tailoring the wood/polymer interface in the cell wall and activating the redox activity of native lignin by sulfonation are important strategies for the fabrication of porous and lightweight wood/conductive polymer composites with potential for sustainable energy applications. [ABSTRACT FROM AUTHOR]

The nature of mass transport in plants has recently inspired the development of low-cost and sustainable wood-based electronics. Herein, we report a wood electrochemical transistor (WECT) where all three electrodes are fully made of conductive wood (CW). The CW is prepared using a two-step strategy of wood delignification followed by wood amalgamation with a mixed electron-ion conducting polymer, poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT:PSS). The modified wood has an electrical conductivity of up to 69 Sm -1 induced by the formation of PEDOT:PSS microstructures inside the wood 3D scaffold. CW is then used to fabricate the WECT, which is capable of modulating an electrical current in a porous and thick transistor channel (1 mm) with an on/off ratio of 50. The device shows a good response to gate voltage modulation and exhibits dynamic switching properties similar to those of an organic electrochemical transistor. This wood-based device and the proposed working principle demonstrate the possibility to incorporate active electronic functionality into the wood, suggesting different types of bio-based electronic devices.

Electrochromic devices have important implications as smart windows for energy efficient buildings, internet of things devices, and in low-cost advertising applications. While inorganics have so far dominated the market, organic conductive polymers possess certain advantages such as high throughput and low temperature processing, faster switching, and superior optical memory. Here, we present organic electrochromic devices that can switch between two high-resolution images, based on UV-patterning and vapor phase polymerization of poly(3,4-ethylenedioxythiophene) films. We demonstrate that this technique can provide switchable greyscale images through the spatial control of a UV-light dose. The color space was able to be further altered via optimization of the oxidant concentration. Finally, we utilized a UV-patterning technique to produce functional paper with electrochromic patterns deposited on porous paper, allowing for environmentally friendly electrochromic displays.

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is an organic mixed ion-electron conducting polymer. The PEDOT phase transports holes and is redox-active, whereas the PSS phase transports ions. When PEDOT is redox-switched between its semiconducting and conducting state, the electronic and optical properties of its bulk are controlled. Therefore, it is appealing to use this transition in electrochemical devices and to integrate those into large-scale circuits, such as display or memory matrices. Addressability and memory functionality of individual devices, within these matrices, are typically achieved by nonlinear current-voltage characteristics and bistability-functions that can potentially be offered by the semiconductor-conductor transition of redox polymers. However, low conductivity of the semiconducting state and poor bistability, due to self-discharge, make fast operation and memory retention impossible. We report that a ferroelectric polymer layer, coated along the counter electrode, can control the redox state of PEDOT. The polarization switching characteristics of the ferroelectric polymer, which take place as the coercive field is overcome, introduce desired nonlinearity and bistability in devices that maintain PEDOT in its highly conducting and fast-operating regime. Memory functionality and addressability are demonstrated in ferro-electrochromic display pixels and ferro-electrochemical transistors.

A mixed ionic-electronic conductor based on nanofibrillated cellulose composited with poly(3,4-ethylene-dioxythio-phene):-poly(styrene-sulfonate) along with high boiling point solvents is demonstrated in bulky electrochemical devices. The high electronic and ionic conductivities of the resulting nanopaper are exploited in devices which exhibit record values for the charge storage capacitance (1F) in supercapacitors and transconductance (1S) in electrochemical transistors.