Search

To increase the power density of a wireless power transfer (WPT) system, the coupling of coils can be strong. However, in a strongly coupled series–series WPT system with a diode rectifier, currents can be distorted and discontinuous, and first harmonic approximation is no longer valid. The inverter is likely to work in hard switching, leading to extra noise, decreased efficiency, and a potential hazard for a safe operation. Through time-domain analysis, this article reveals that with a dual-side 90° phase shift, the hard switching of the inverter can be avoided, the power level can be enhanced, and the discontinuous conduction mode can be avoided to eliminate noises. The factors impacting the soft switching operations of the inverter and the rectifier are analyzed. To achieve 90° dual-side phase shift, the conventional approach of using the receiver voltage/current, which can be distorted and discontinuous in strongly coupled WPT systems, for phase synchronization is no longer suitable. A new set of coils, namely driving coils, is used for phase synchronization so that dual-side phase shift can be implemented independent from power transfer. Experimental results have validated the effectiveness of the analysis. [ABSTRACT FROM AUTHOR]

A wide operating region of inductive power transfer systems indicates a stable output against large load and coupling changes. In most of the published works, output regulation is achieved by single-side regulation that utilizes either primary-side or secondary-side power converters for load regulation. However, secondary-side regulation tends to have a relatively narrow operating region due to space and cost considerations. Meanwhile, although primary-side regulation may provide a larger operating region, system performance can be degraded due to the needs of secondary-side information. To overcome the drawbacks of single-side regulation, this article proposes a dual-side cooperative output regulation method implemented by burst-mode pulse density modulation. In the proposed method, dual-side cooperative control is established by sensing primary-side current drops caused by secondary-side burst operations and, hence, requires no communication devices. With the proposed method, the system operating region can be effectively extended without sacrificing steady-state performance. Experimental results are provided in this article to validate the proposed method. [ABSTRACT FROM AUTHOR]