Search

A hybrid Schottky–ohmic drain technology for millimeter-wave (mmW) AlGaN/GaN high-electron-mobility transistors (HEMTs) is proposed. The Schottky metal extension in the ohmic region of drain reduces the actual source–drain spacing, resulting in a smaller ON-resistance and a higher maximum current. Extended Schottky metal in the drain region modulates the electric-field distribution, thereby leading to an improved breakdown voltage, suppressed current collapse, and high reliability. Compared with the ohmic drain, the current gain cutoff frequency (${f}_{T}$) was improved from 64 to 76 GHz, and the maximum oscillation frequency (${f}_{\text {max}}$) was improved from 125 to 157 GHz, resulting from the decreased parasitic drain resistance (${R}_{d}$). Moreover, large-signal measurements in continuous wave (CW) at 30 GHz demonstrated a peak power-added efficiency (PAE) of 45.5% and a saturated output power density (${P}_{\text {sat}}$) of 8.5 W/mm at ${V}_{\text {ds}}= {30}$ V. In addition, the direct current (DC) and radio frequency (RF) characteristics showed a negligible degradation after large-signal measurements at 30 GHz. [ABSTRACT FROM AUTHOR]

AlGaN/GaN high-electron-mobility transistors (HEMTs) with Si-rich SiN/Si3N4 bilayer passivation were studied in this article. The use of a Si-rich SiN interlayer leads to improved channel transport property, current collapse, power performance, and temperature-dependent stability. Devices without Si-rich SiN interlayer passivation exhibit an increase in the gate leakage current by over three orders of magnitudes with temperature increasing from 300 to 420 K, leading to an increase in a current collapse from 9.7% to 24.7%, while the devices with Si-rich SiN passivation exhibit a weak temperature dependence of leakage current and a constant current collapse about 5%. Small signal characterization shows that Si-rich SiN passivation results in a remarkable decrease in the effective gate length by ~15% with temperature up to 420 K. At 17 GHz, devices with Si-rich SiN interlayer passivation exhibit an output power density of 7 W/mm and a peak power-added efficiency (PAE) of 56%. The improved power performance of devices using Si-rich SiN interlayer passivation is attributed to the suppressed current collapse and superior device stability under high channel temperature. [ABSTRACT FROM AUTHOR]

In this work, the performance of AlGaN/ gallium nitride (GaN) high-electron mobility transistors (HEMTs) with different Fe doping tails was systematically investigated and compared. It is illustrated that the combination of the unintentionally doped (UID) GaN layer and a thinner Fe doping buffer layer would result in a faster slope rate of Fe concentration in the UID GaN layer. The devices with the fastest slope rate of Fe concentration in the UID GaN layer exhibited excellent large signal performance, including the saturated power density (${P}_{sat}$) of 9 W/mm and the power-added efficiency (PAE) of 65.6%. In addition, the ${P}_{sat}$ and the PAE of the device with the fastest slope rate of Fe concentration in UID GaN layer are 27.7% and 14.7%, which are higher than that of the device with the slowest slope rate of Fe concentration under the class AB operation conditions. Pulse ${I}$ ,– ${V}$ measurement results demonstrated that the buffer-related current collapse was more effectively suppressed in the 0.5- $\mu \text{m}$ Fe doping buffer layer because of faster slope rate of Fe concentration in UID GaN layer. Moreover, the frequency-dependent capacitance and conductance measurement results indicated that the current collapse was relevant to deep traps in the UID GaN layer introduced by Fe doping. By reducing the concentration of the deep traps caused by Fe doping, the device showed excellent characteristics of dc and RF. Furthermore, controlling the Fe doping tail was important for designing the GaN-based power amplifier with high ${P}_{sat}$ and PAE. [ABSTRACT FROM AUTHOR]

The submicrometer gate HEMT is fabricated with an ultrathin-barrier (UTB) AlGaN/gallium nitride (GaN) combined with in situ SiN passivation. The sheet resistance of the UTB Al0.2Ga0.8N (4 nm)/GaN heterostructure is effectively reduced by the SiNx passivation layer grown by metal organic chemical vapor deposition (MOCVD), from 6500 to $312~ \Omega $ /⬜. With the 20-nm stress-engineered in situ SiN, the device not only provides a large output current of 1.05 A/mm but also demonstrates promising potential on the RF applications, which gives AlGaN material two records high cutoff frequency ${f} _{\text {T}}/{f} _{\text {max}}$ of 157 GHz/334 GHz for 100-nm gated device and 211 GHz/379 GHz for 70-nm gated device. During the continuous wave (CW) power measurement at 30 GHz, the 70-nm devices exhibit a large output power of 4.6 W/mm associated with a peak power-added efficiency (PAE) of 48.1% and a gain of 11.6 dB (${V} _{\text {ds}} =20$ V), and a high PAE of 53.8% with an output power density of 1.9 W/mm and a gain of 10.8 dB (${V} _{\text {ds}} =10$ V), respectively. The huge potential of the UTB-AlGaN/GaN is demonstrated for high-frequency and large-output power applications when it is combined with the in situ SiN, which is necessary for future communication systems. [ABSTRACT FROM AUTHOR]

In this article, we report on the effective transconductance (gm) and gain linearity improvement of submicrometer gate AlN-barrier-based transistors using GaN/InGaN coupling-channel structures. The fabricated AlN/GaN/InGaN coupling-channel high electron mobility transistor (CC-HEMT) showed flat gm profile, greatly reduced gm derivatives, and constant dynamic source resistance compared with an AlN/GaN HEMT using the same fabrication process. The highest extrinsic current gain cutoff frequency (ƒT) of 55 GHz and the maximum oscillation frequency (ƒmax) of 80 GHz were obtained for 0.15- μm gate-length transistors, both of which remain constant values across wide input voltage (VGS) of 4 V. Moreover, a significant theoretical OIP3 value boost by 7.1 dB has been observed using the CC-HEMT as compared to the AlN/GaN HEMT. The superior linearity performance of the CC-HEMT can be attributed to the strong channel-to-channel coupling effect. The drain bias-dependence of gm, ƒT, and ƒmax versus VGS profiles illustrate that the linearity characteristics of the CC-HEMT greatly improve with an increase in VDS. These results demonstrate the AlN/GaN/InGaN material system as a viable platform for high frequency requiring high-linearity applications. [ABSTRACT FROM AUTHOR]

In this letter, we explore the impact of configuration parameters for Fin-like high-electron-mobility transistors (HEMTs) formed by partially etching barrier under the gate on improving transconductance (Gm) and cutoff frequency (ƒT) linearity. It is found that the Gm profile for Fin-like HEMTs can be optimized by choosing appropriate device parameters, including the etching depth (HR) and width (WR) of recess region, as well as the duty ratio (α) of the planar elements in a periodic unit along the gate width. In general, not only does WR affect the gate voltage swing (GVS) but also HR and α have an important role in Gm profile flatness. In addition, the fabricated Fin-like HEMTs shows a GVS of the transconductance plateau larger than 5.6 V and a constant ƒT/ƒmax of 45 GHz/65 GHz over a wide gate voltage range. Furthermore, the proposed architecture also features an exceptional linearity performance at 8 GHz with an output third-order intercept point (OIP3) of 38.5 dBm, whereas that of the planar HEMT is 31 dBm. The device demonstrated in this article has great potential to be a new paradigm for future wireless communication systems where high linearity is essential. [ABSTRACT FROM AUTHOR]

In order to further improve the electrical characteristics of AlGaN-buffer devices, we propose a new in situ SiN/AlGaN-sandwich-barrier (SWB)/GaN/Al0.05GaN high-electron mobility transistors (HEMTs). The dc, channel temperature, and RF temperature of the proposed AlGaN-buffer devices have been systematically studied and analyzed. The SWB structure can effectively reduce the peak value of the electric field, thus effectively reducing the self-heating effect and improving the breakdown characteristics. Through the channel temperature extraction method of pulsed IV and TCAD thermal simulation, the channel temperature of devices with different barrier structures is compared and analyzed, which proves that SWB structure can effectively reduce the channel temperature of devices. Due to the more obvious potential modulation effect between gate and drain, the ƒmax of device can improve more effectively with the increase of drain voltage. In addition, load-pull measurement at 10 GHz revealed that a saturated power density increased from 7.3 to 8.4 W/mm and an associated PAE increased from 24.9% to 29.4%. [ABSTRACT FROM AUTHOR]

In this paper, AlGaN/GaN Fin-HEMTs with different fin configurations are theoretically and experimentally investigated. A simple physical-based threshold voltage model for AlGaN/GaN Fin-HEMTs is built for qualitative analysis. It is shown that the threshold voltage of AlGaN/GaN Fin-HEMTs depends on the width and height of the fin structure. The peak value and linearity of transconductance and current gain cutoff frequency are improved by reducing the fin length. It is also found that the linearity of transconductance is sensitive to the fin height, which can be attributed to the capacitance control from sidewalls. [ABSTRACT FROM AUTHOR]

Flash-like Al2O3/AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MIS-HEMTs) were fabricated using a charge trapping technique. These MISHEMTs showed a large threshold voltage ( V\text {th} ) shift of 9.35 V after applying a 10-V program voltage ( VP ), resulting in a normally-off device with a high V\text {th} of 2.6 V and a high maximum drain current ( I\mathrm {dmax} ) of 0.9 A/mm. The V\text {th} dependence on VP was analyzed and V\text {th} was above 0 V for VP = 8 V. Photo-assisted C – V measurements revealed that the traps contributing to the large V\text th shift had a density of 2.18\times 10^13 cm−2 and the activation energy for the photo-assisted de-trapping process ranged from 2.67 to 3.06 eV. These traps were attributed to border or oxide defects. The retention level of the device was up to 102 s after applying 10-V VP . These results indicate that the charge trapping method with a single Al2O3 dielectric is a promising way to achieve normally-off devices with both high V\mathrm {th} and high I\mathrm {dmax} . [ABSTRACT FROM PUBLISHER]

This letter reports on a novel enhancement-mode (E-mode) AlGaN/GaN high electron mobility transistor (HEMT) that combines nanowire channel and fluorine plasma treatment using inductively coupled plasma (ICP). Compared with the conventional HEMTs, the threshold voltage of E-mode HEMT shifts from −2.8 to +0.7 V, and the Schottky reverse leakage current is reduced by one order of magnitude. The device exhibits a superior performance with a drain current of 460 mA/mm at V {{\text {GS}}} - V {{\text {TH}}} = 2 V. High \textI{ \mathrm{\scriptscriptstyle ON}}/\textI{ \mathrm{OFF}} ratio of approximately $10^{{\mathbf {9}}} and high breakdown voltage of 138 V with \textL{{\text {DS}}}=4~\mu \text{m} are obtained, i.e., the breakdown voltage of E-mode HEMT is improved by 25% than that in conventional HEMTs. The drain induced barrier lowering (DIBL) is as low as 4 mV/V, and the subthreshold swing (SS) of 70 mV/decade is achieved. The device exhibits an intrinsic current gain cutoff frequency f{\text T} of 22 GHz and a maximum oscillation frequency f {\text {max}} of 60 GHz. [ABSTRACT FROM AUTHOR]

Gate-recessed AlGaN/AlN/GaN metal–oxide–semiconductor heterostructure high-mobility transistors (MOS-HEMTs) on SiC substrate are fabricated. The device with a gate length of 0.6 \mu\m and a gate periphery of 100 \mu\m exhibits a maximum dc drain current density of 1.59 A/mm at VGS = \3\ \V with an extrinsic transconductance (gm) of 374 mS/mm. An extrinsic current gain cutoff frequency (fT) of 19 GHz and a maximum oscillation frequency (f\max) of 50 GHz are deduced from S-parameter measurements. The output power density is 13 W/mm, and the associated power-added efficiency is 73% at 4-GHz frequency and 45-V drain bias. The power performance is comparable to state-of-the art AlGaN/GaN HEMTs, which demonstrates the great potential of gate-recessed MOS-HEMTs as a very promising alternative to GaN HEMTs. [ABSTRACT FROM AUTHOR]