Search

Conventional voltage-source inverters used for induction motor drives generate a hexagonal space vector structure. In the overmodulation range, the hexagonal space vector structure generates low-order harmonics in the phase voltage resulting in low-order torque ripple in the motor. Inverter topologies with an octadecagonal (18 sided) space vector structure eliminate fifth-, seventh-, eleventh-, and thirteenth-order harmonics from the phase voltage, and hence, the dominant sixth- and twelfth-order torque ripple generation is eliminated. Octadecagonal space vector structures proposed in the past require multiple dc sources, which makes four-quadrant operation of the drive system difficult and costly. In this paper, the formation of a multilevel nine-concentric octadecagonal space vector structure using a single dc source is proposed. Detailed experimental results, using open-loop $V/f$ control and rotor field-oriented control, are presented to validate the effectiveness of the proposed drive scheme. [ABSTRACT FROM PUBLISHER]

In this paper, a new space vector pulse width modulation method to extend the linear modulation range of a cascaded five level inverter topology with a single dc supply is presented. Using this method, the inverter can be controlled linearly and the peak phase fundamental output voltage of the inverter can be increased from 0.577 to 0.637 V\text{dc} without increasing the dc bus voltage and without exceeding the induction motor voltage rating. This new technique makes use of cascaded inverter pole voltage redundancy and property of the space vector structure for its operation. Using this, the induction motor drive can be operated till the full speed range (0–50 Hz) with the elimination of lower order harmonics in the phase voltage and phase current. The five-level topology presented in this paper is realized by cascading a two-level inverter and two full bridge modules with floating capacitors. The inverter topology and its operation for extending the modulation range is analyzed extensively. Simulation and experimental results for both steady-state and dynamic operating conditions are presented in this paper. [ABSTRACT FROM AUTHOR]

This paper proposes a new method of generating higher number of levels in the voltage waveform by stacking multilevel converters with lower voltage space vector structures. An important feature of this stacked structure is the use of low voltage devices while attaining higher number of levels. This will find extensive applications in electric vehicles since direct battery drive is possible. The voltages of all the capacitors in the structure can be controlled within a switching cycle using the switching state redundancies (pole voltage redundancies). This helps in reducing the capacitor size. Also, the capacitor voltages can be balanced irrespective of modulation index and load power factor. To verify the concept experimentally, a nine-level inverter is developed by stacking two five-level inverters and an induction motor is run using V/f control scheme. Both steady state and transient results are presented. [ABSTRACT FROM AUTHOR]

This paper presents a method for generating a multilevel dodecagonal voltage space vector structure using a single dc source for induction motor drives. Multilevel dodecagonal structure combines the advantages of both multilevel and dodecagonal structures, and hence, generates low dv/dt phase voltage along with the elimination of fifth- and seventh-order harmonics over the entire modulation range. This eliminates low-order harmonic currents and prevents the generation of sixth-order torque ripple in the motor. The topology used requires only one dc source making four-quadrant operation of the drive system simpler compared to previously proposed multilevel topologies generating dodecagonal space vector structures. The topology used consists of a three-level flying capacitor (FC) inverter cascaded with a capacitor fed H-bridge. The FC inverter operates at a lower switching frequency and the low-order harmonics are eliminated by the switching action of the cascaded H-bridge inverter. The capacitors in the cascaded H-bridge modules are maintained at a substantially smaller voltage compared to the dc-link voltage and are inherently balanced during the pulsewidth modulation operation. This results in low switching loss, in the FC inverter as well as in the cascaded H-bridge inverter. Experimental results are included to validate the operation of the topology and modulation scheme presented in this paper. [ABSTRACT FROM AUTHOR]

Zero-common-mode-voltage (CMV) operation of multilevel inverters results in reduced dc-bus utilization and reduced linear modulation range. In this paper, a method to increase the linear modulation range for zero-CMV operation without increasing the dc-bus voltage using a cascaded multilevel inverter with a single dc supply is presented. Using this method, the peak fundamental output voltage can be increased from 0.499 to 0.637  \textV\text{dc} with zero CMV inside the linear modulation range. Also, various pulse width modulation (PWM) switching sequences are analyzed in this paper, and the PWM sequence that gives minimum current ripple is used for the zero-CMV operation of the inverter. The inverter topology with single dc supply is realized by cascading a two-level inverter with two floating-capacitor-fed full-bridge modules. Simulation and experimental results for steady-state and dynamic operating conditions are presented to validate the proposed method. [ABSTRACT FROM AUTHOR]