Search

This study is about the characterization of pulp and paper from sago fiber waste. The process has several stages: preparing a solution, sago fiber analysis, pulping process, and printing process. The required solutions are NaOH solution (technical), 10% BaCl2 solution, 0.1 N HCl solution, 60% ethanol solution, phenolphthalein indicator solution, 1% starch indicator solution, sindur methyl indicator solution of NaOH titration, borax solution, Na₂S solution (technical), and THIO solution (1 N; 0.1 N). The pulping process is carried out by inserting sago fiber and solutions into a rotary digester machine for 4 hours (170oC). Then, it is removed after 24 hours and dried by a spinner machine. Characterizations on the sample include: chemical and physical properties, mechanical properties, and optical properties. The result shows that sago fiber waste can be used as raw material for paper. The value of grammage of 62 g/m2, thickness of 0.1294 mm, water absorption capacity of 627.27 g/m2, water content of 9.83%, ash content of 26.26%, pH of 7.9, tensile strength of 14.22 MD and 13.33 CD, brightness of 19.8%, and opacity 22.78. The pore diameter of the paper is 4.608 nm. [ABSTRACT FROM AUTHOR]

Wood is biomass made from lignocellulose, the main raw material for pulp production, both species of hardwood and softwood. Utilization of as much wood as possible, including less-known wood species, is widely open because the availability of good quality wood for industry raw materials is increasingly limited. In general, all wood species can be used for paper pulp. But the selection of types of lignocellulosic material with specific properties, such as physical, anatomical and chemical, play an important role in efficiently using wood as raw materials for pulp and paper. This research was carried out to examine wood properties (specific gravity, fiber quality and cellulose content) of four less-known hardwoods from natural tropical rainforest in South Sulawesi province of Indonesia and assessed their potential use for paper pulp. Those hardwood species comprised of cempedak (Artocarpus integer Merr.), jabon merah (Anthocephalus macrophyllus Hav.), saling-saling (Artocarpus teysmanii Miq.) and simpur (Dillenia serrata Thunb.). The specific gravity determined by the weight of oven dried wood and volume of air dried wood where the wood volume be measured by water immersion method, the fiber dimensions measured through maceration preparations which was made using the Franklin procedure, while TAPPI method used for chemical analysis. In condition to paper pulp raw material, the specific gravity (0.40 – 0.69) is categorized as moderate, the fiber quality is classified as good (class II), and cellulose content (40.12% - 52.47%) is categorized as moderate to high for all those less-known hardwoods. All four less-known hardwoods studied potentially use for paper pulp raw materials. But simpur has the most potential due to long fiber and higher specific gravity. [ABSTRACT FROM AUTHOR]

This work relates to the development of recycled paper from waste paper with the objective of optimization of the composition. The paper properties are much affected with composition like amount of waste paper, fresh paper, cotton shreds, adhesives and water. Samples were made by taking different composites and tests were performed to evaluate properties i.e. thickness, coefficient of friction, moisture content, scott bond strength, tensile strength. The testing concluded that the samples which were having cotton shreds and adhesives showed very good results closer to the fresh paper. [ABSTRACT FROM AUTHOR]

Variation of fly ash and pulp paper composition at 110°C for 6 hours was carried out to discern the effect of fly ash and pulp paper addition in papercrete. sixth variations in paper pulp and fly ash composition were employed to perceive the characteristic that occurs in the sample. The papercrete material composition was weighed, mixed until it became homogeneous and then casted in a mold with a size of 18 x 5 x 2 cm3. Papercrete samples were allowed to stand within the mold at room temperature for 24 hours and released from the mold to stand again for the next 24 hours, after which it heated at 110°C for 6 hours. Characterization using XRF, SEM-EDX as well as Mechanical and physical tests carried out after the samples was cold. Papercrete with sample code K6 has the highest flexural strength and density value of 2.03 MPa and 2.4 gr/cm3 while papercrete with sample code K1 has the lowest flexural strength and porosity value of 0.4 MPa and 17.89%. Characterization shows that the chemical composition of the samples was dominated by the oxide compound CaO and SiO2 in papercrete. [ABSTRACT FROM AUTHOR]

The article examines the structure of silk fibers and ways of efficient use of fiber waste. Based on the analysis of the composition and structure of the fibers, it is possible to use them for paper production. The use of short staple fibers in the production of stock paper and the processes of preparing them for incorporation into paper pulp are widely covered. Information is provided on the technological process of cleaning fibers before adding them to paper pulp. The influence of the mass fraction of fibers in paper on its strength, breaking and tearing has been thoroughly analyzed and illustrated by means of graphs. For the production of high-quality paper, for example, valuable paper, for the preparation of paper used in printing, drawing, painting, etc. Fiber semi-finished products must be cut to the required length and separated into individual fibrils before crushing (grinding). The technology of preparation of natural silk waste as raw material for paper production is presented. In addition to silk fiber cotton fiber was also studied in the research work. Theoretically, the effect of fibers in tearing and breaking of paper is shown in the pictures. The use of fibers in the production of anti-counterfeiting paper and the process of adding them to the pulp are given. [ABSTRACT FROM AUTHOR]

Super teak is a fast grown species of teak (Tectona grandis Linn. f) derived from several clones. This has facilitated plantation rotations as short as 5 years. The main target of conventional plantation teak was initially for high value logs. Young teak wood from plantation forest usually has a small diameter. Moreover, the wood from very young stems is unsuitable for direct utilization, but advance wood processing technology can improve the wood properties of small diameter logs. This study aimed to assess the potential utilization of young super teak for high quality products namely furniture, flooring, and veneer, and assess the possibility of the use of manufacture waste for pulp paper and wood pellets as side products. The evaluation were carried out according to the National Indonesian Standard and other international standard requirements. 18 logs from wet (Bogor) and dry (Magetan) sites representing large, medium, and small diameter classes were collected. According to SNI 01-0608-1989 Timber for Furniture, 5-year-old super teak was suitable for furniture production. Furthermore, according to SNI 7732.1: 2011: Teak Veneer, the super teak was classified as Grade C because of the presence of sapwood, pinholes, tight and lose knots. According to Australian Timber Flooring Association, 5-year-old super teak was classifiesd as soft flooring group, the same group as mature teak & radiata pine. The young super teak was classified as Class Quality/Group II with very low active alkali consumption and low Kappa Number according to Indonesian wood fibre criteria for pulp and paper materials and Association of Pulp and Paper in Brazil. Finally, based on SNI 802: 2014 Wood Pellet, the super teak was recommended as by-products for utilising the wood waste. [ABSTRACT FROM AUTHOR]

In the world of today, receiving complaints or feedback has become fundamental for an organization aiming to improve the quality of its products or services. Similarly, public complaints must be addressed to improve government service. There is no direct or effective channel for citizens in India to address issues with the government. Later, the government launched applications for registering complaints to make the public's job easier. However, there are some issues related to those applications' equity, i.e., the difficulty faced by the rural community and uncivilized people in using those applications. This paper proposes a smart microphonic grievance system that will allow people to register complaints orally, automatically classify them, and forward them to the appropriate sector. The test results demonstrate that this system can reduce the time and process for filing complaints and that it can be used by a diverse group of individuals in society. Overall, this system is a valuable solution for improving complaint management and addressing the unique needs of rural residents. [ABSTRACT FROM AUTHOR]

We extend the inventory lot-size model in this paper to allow for products to deteriorate at variable rates, and demand is characterized by any log concave function of time that fulfils relatively mild criteria. Partial backlogging is possible with this model. The backlogging rate is a time-dependent, exponentially declining function provided by a parameter. We show that not only does the optimal replacement schedule exist, but that it is also unique. We also show that the inventory system's overall cost is a convex function of the number of replenishments. As a result, identifying a local minimum simplifies the search for the best number of replenishments. Finally, a numerical example is given to demonstrate the findings. [ABSTRACT FROM AUTHOR]

The study aims to produce concrete using various percentages of hypo-sludge ash (HAS) in place of cement. The waste paper sludge ash is composed of magnesium oxide and calcium oxide. Therefore, it can be tested as an innovative cement replacement, providing a solution for traditional concrete. For this study, the various proportions of ash used are 5%, 10%, and 15% by weight of cement. The mixed design carried out was as per the Indian standard code. The ingredients used for concrete making are cement, aggregates, hypo sludge ash (HSA), superplasticizer, and water. A test mix was carried out to check the behaviour of a concrete mix, and its physical and hardening properties were checked. Cube samples were cured for 3, 7, 14, and 28 days to check hardening properties. Experimental analysis shows that by replacing 5% cement with HSA, the strength results obtained are close to the reference concrete. [ABSTRACT FROM AUTHOR]

In order to increase energy security or to reduce diesel engine exhaust emissions, the use of biodiesel fuel is continuously increased. This effort is carried out by increasing the composition of biodiesel in the biodiesel blends. One of other considerations regarding the use high composition biodiesel blends above 20% (B20) is the concern of fuel filter blockage or shorten the life time. Various efforts have been done to overcome filter blocking problems due to the use of biodiesel, so that mitigation can be carried out. One of the evaluations of the effect of using palm oil biodiesel with a high composition above 20% has been carried out by acceleration testing in a test rig with additional dust contaminants. The test used fuel filter paper with a porosity of 30 micron with variations in the composition of the test fuel, namely pure diesel/B0 (Pertadex), B30, B50 and B70. The test was carried out by flowing the test fuels through filter paper in a DENSO standard test rig in temperature ambient (around 29°C). Filter blocking was recorded by the differential pressure (delta pressure) between before and after of the test filter paper. The results show that for the pure diesel and biodiesel blends without any contaminants, there is no increase in the differential pressure. Otherwise, for the addition of 3 grams of contaminants per 15 liters of test fuels, a higher biodiesel composition will result in a faster increase in the filter differential pressure. [ABSTRACT FROM AUTHOR]

Paper-making raw materials are a mixture of pure wood pulp and recycled pulp. Recycled pulp is obtained from used paper imported from abroad, in addition to the development of paperless culture also has an impact on the reduced availability of raw materials. Empty bunch fiber of palm oil is one of the natural materials that have the potential to be used as an alternative to a pulp for the manufacture of cardboard paper because it has a high holocellulose content. This study has successfully developed cardboard paper developed from oil palm empty fruit bunch pulp with 6 variations of treatment, steam, no steam, NaOH 2.5%, NaOH 5% and mill duration (20 minutes and 30 minutes). The developed cardboard paper is then tested for its water absorbency. Water Absorbency value testing is done by the Cobb method (60). Based on the test results obtained the water absorption values is in the range of 500 - 600 g/m2. Cartons that received treatment, no steam, added NaOH 2.5%, and milled for 30 minutes, has the lowest water absorption value compared to others. [ABSTRACT FROM AUTHOR]

Nowadays, induction machines can be considered the backbone of various industrial applications due to the many characteristics such as rigidity, simplicity, high reliability, and low maintenance that can be manufactured for a long time. However, poor efficiency and power factor and increased amounts of torque ripple and losses significantly impact the performance and hence its efficiency. Therefore, in order to improve the performance of induction machines, the special design topology for stator and rotor configurations must be investigated and correctly estimated. This paper presents the analysis of the variable geometries of the cage's rotating bars. More specifically, the influence of dimensions and positions, as well as the shapes of the rotor rods, have a significant impact on the dynamic performance (developed torque, starting torque, ripple torque, starting current, power factor, harmonics, output power, and efficiency) are investigated. The Finite Element Method (FEM) is used to create the optimum designs as well as calculations are used to optimize the shapes of rotor slots in order to improve starting performance characteristics such as starting current, initial torque, magnetic flux connection under starting conditions, and efficiency. Furthermore, the characteristic of the manufacturing material of the rotor are examined, and methods to reduce losses for an induction motor to enhance efficiency are examined. This paper focuses on the squirrel cage induction motor (SCIM). [ABSTRACT FROM AUTHOR]

Energy transition from fossil energy to renewable energy (green energy) which is more environmentally friendly has been regarded as an utter necessity that requires policy. The study presented in this article is aimed at optimizing development of green energy in a situation of fluctuating fossil energy prices. The method used is a paper review and comparative quantitative-qualitative analysis, Strengths Opportunities Aspirations Result (SOAR) analysis on secondary data supported by empirical information in the energy industry. The paper on the topic of marketing strategy for the development of renewable energy using SWOT analysis was chosen as a comparison for the analysis of development through SOAR. Furthermore, the results of the comparison between SOAR and SWOT analysis are used as the basis for selecting alternative strategies. Exploration and exploitation of fossil energy requires a high investment, so optimizing fossil energy requires technology that is able to convert this energy into a more environmentally friendly, the management of fossil energy carried out five pillars, namely human resource development, application of new technology and information systems, processes, manufacturing, environmental protection, health and sustainability. Some examples of activities that have been carried out include the construction of solar-based power plants, micro hydro, and the development of bio gas. Greenovator programs that benefit the environment and society. The result of this review on the proposed alternative solutions for green energy development using and encourages a symbiosis between the governments - the community - the fossil energy industry - the green energy industry. As an alternative strategy towards optimizing the development of renewable energy, the use of fossil energy is still needed in the transition energy because the fossil energy industry can be in line with renewable energy development in Indonesia. [ABSTRACT FROM AUTHOR]

Herein we report the facile synthesis of silver nanoparticles (AgNPs) via the green synthesis method using mangosteen (Garcinia Mangostana L.) peels waste extract (MPE) as the bioreducing agent. The synthesized AgNPs were employed as the probe in the paper-based colorimetric detection of Pb2+. Initially, the MPE was prepared using a reflux system for a 3 h reaction, followed by mixing the AgNO3 precursor and the prepared MPE, then left undisturbed for a 6 h reaction until a dark brown solution of AgNPs was obtained. The AgNPs showed a strong visible absorbance peak at 415 nm that indicated the AgNPs were successfully formed, whereas there was no peak observed at 415 m for the MPE. Further investigation, the IR spectra revealed that the OH-groups of flavonoids derivative in the MPE have a main role in the AgNPs formation, while the XRD pattern confirmed the prepared AgNPs have face center cubic structure with the crystalline size of 11.38 nm as well as the SEM characterization showed a spherical to triangle morphology of AgNPs. The paper-based-colorimetric performance evaluation showed a wide linearity range from 8 ppb to 100 ppm with a limit of detection (LOD) less than 12.50 ppm and high selectivity toward Pb2+ instead of Zn2+, Mg2+, Na+, and K+ at 30 min reaction, indicating the green synthesized AgNPs have the potential for probe in colorimetric sensing. [ABSTRACT FROM AUTHOR]

The modification of the metal surface is one of the efforts used to increase the bonding strength to provide a good deposite for the hydroxyapatite layer. This study aimed to determine the effect of abrasive paper roughness and alkali heat treatment on 316L stainless steel for hydroxyapatite coating. The surface of the 316L stainless steel substrate was roughened using SIC paper 80, 400 and 1200 grit. Then soaked with sodium hydroxide (NaOH) solutions for 24 hours at a temperature of 40 °C and then the substrate was sintered at a temperature of 500 °C, 600 °C and 700 °C with a holding time of 1 hour. The coating process is carried out using a dip coating method by immersing the substrate into the hydroxyapatite slurry and sintered at a temperature of 750 °C. The result of this study shows that sodium chromium oxyde (Na4CrO4) was successfully formed on the metal surface of 316L Stainless steel. The highest and lowest shear strength values were obtained on 80 grit samples with heat treatment temperatures of 700 °C and 600 °C, respectively 4.685 MPa and 0.465 MPa. The thickness of the hydroxyapatite (HA) layer on 316L stainless steel obtained was 51.68 µm; 58.28 µm; 73.63 µm and 70.13 µm. [ABSTRACT FROM AUTHOR]

Five fuels were tested in a common rail direct injection (CRDI) diesel engine to see how they affected soot particle distribution and the engine's controlled and unregulated emission characteristics (M15, M25, and M35). The findings demonstrated that regulated emissions of carbon monoxide (CO), hydrocarbons (HC), and particulate matter (PM) could be efficiently controlled to a very low level when mahua oil biodiesel (MOB) in diesel was utilized in conjunction with ideal engine working situations. Paper filters were employed to remove diesel dust. Entire particulate matter main particles were < 100 nm in width, with the average diameter for the biodiesel mixes falling among 20 and 26 nm. PM particles had uncontrolled emissions including Pb, Mn, and Ba, while M100 had 56.72% fewer xylene emissions, 22.49% fewer toluene emissions, and 19.45% fewer benzene emissions compared to M0. As a result, MOB is a wonderful option for reducing pollution from diesel engines and other sources, both in the form of controlled and unregulated emissions. [ABSTRACT FROM AUTHOR]

Attendance monitoring is an essential task for any organization and traditional methods such as pen and paper or electronic card systems have their limitations with advancements. The proposed model is a real time face presence monitoring system using Raspberry Pi. The system captures image of individuals using camera and processes the images using deep learning algorithms to detect faces. These faces are then matched against a pre-existing database of known individuals. Door interlock controls add an extra layer of security, ensuring that only authorized person have access to restricted areas. The system provides a user-friendly interface to view everyone's attendance records and generate attendance management reports. The proposed system provides a reliable and accurate solutions for attendance tracking and can be used in various organizations. [ABSTRACT FROM AUTHOR]

In this work, we develop the rapid diagnostic kit potentially applied as point-of-care testing for kidney disease (nephropathy) through detecting albumin in urine samples. For this purpose, gold-nanoparticle (AuNPs) in combination with anionic dyes of Bromocresol Purple (BCP) and Bromothymol Blue (BTB), which are immobilized onto distance-based microfluidic paper-based analytical devices (d-μPADs), are utilized as sensing reagents. In this device, two mechanisms operate for quantitative and semiquantitative detection of albumin using d-μPAD, which include (1) protein error of pH indicator by direct reaction of albumin with dyes and (2) full corona protein formation of AuNPs with albumin. These synergistic reaction mechanisms facilitate the sharp color change of dyes, easily detected by the naked eye. Some parameters affecting the sensitivity of the proposed method, such as dye concentration, pH, reagent volume ratio, reagent immobilization, and reaction time, are investigated in detail. Inexpensive, disposable, and easy to use without technical expertise for albumin detection are advantages of the proposed method. Additionally, the proposed method has a high precision (RSD: 1.08%) and accuracy (99.38-99.96%) [ABSTRACT FROM AUTHOR]

A growing field in India that can assist farmers in many ways is the identification of plant diseases. Plant disease reduces the mass production in agriculture. Every time due to heavy loss in agriculture, farmers face many challenges to raise up their needs. This study analyzes various diseases that affect various plants due to the following criteria like environmental condition, types of plant formed from Monocot and Dicot family, crop rotation and Ph value of the soil. The existing system analyzed the diseases based on one of the criteria. Although the strategy is to be followed to identify plant diseases at the early stage with various aspects so that the production in agriculture could be increased. The majority of machine learning algorithms already exist and may be improved upon to yield more accuracy. Xanthomonas wilt, Black and Yellow Sigatoka, Bunchy Top Virus, Black Sigatoka, Fusarium wilt, Cassava Bacterial Blight (CBB), Cassava Brown Steak Disease (CBSD), Cassava Green Mite (CGM), and Cassava Mosaic Disease (CMD), Yellow vein mosaic virus, and Powdery Mildew are a few of the diseases of the plants grown on crop rotation which are the subject of study of this paper. Plant illnesses are classified according to disease in the many open-source datasets that are accessible. For deeper understanding, we have provided a list of references. Here, we've examined the approaches that are now in use for automatically detecting various diseases of plant leaves. We present an approach for accurately identifying early signs of plant diseases from a variety of perspectives. [ABSTRACT FROM AUTHOR]

This study aims to identify the performances of cationic starch (CS) and sodium carboxymethyl celluloses (CMC-Na) as dry strength additives (DSA). The CS and CMC-Na were incorporated with to pulp slurry in different dosages (0.5%-2.0%) during stock preparation. The basic weight of 80 g/m2 was made for each treatment. The results showed that the utilization of CMC-Na had better mechanical properties compared to the CS for all treatments. In general, apparent density and mechanical properties were significantly affected by the addition of DSA. However, through the observation of the experiment, the enhancing effect of CMC-Na on mechanical properties of wastepaper was much higher than using CS except for tear strength. The FESEM imaging results can also help prove the best DSA used in wastepaper production. [ABSTRACT FROM AUTHOR]

In the event of a power transformer failure, the utility could experience an interruption in its power supply. Many factors, including winding deformations, insulation deterioration, transient and overloaded conditions, etc., can lead to this kind of failure. This research explores the relationship between polarisation and depolarization current (PDC) measured from the oil impregnated paper insulation of a high voltage (HV) power transformer to reveal data about the state of the insulation used in these devices. Paper insulation in a power transformer has been documented to age in a non-uniform fashion. Popular models that can model non-uniform ageing include the conventional Debye model (CDM). In the current study, we employed CDM to foresee the performance of oil-impregnated paper insulation. Further, dielectric loss tan and overall insulation conditions have been explored, with the largest magnitude of Z evaluated from the transfer function (TF) of the CDM model impacting most to the insulation condition and projected moisture present in the insulation paper. [ABSTRACT FROM AUTHOR]

The widely use of petroleum-derived mineral oils for the production of offset printing inks has resulted in several environmental impacts. The suitable approach to develop alternative resources is palm oil fatty acid methyl ester (FAME) as a substitute for petroleum-based solvent. This study aimed to investigate the surface properties of palm oil-based offset ink on gloss-coated paper surfaces in terms of printability. The "green" varnishes were prepared with palm oil FAME as solvent, rosin-modified phenolic resin, and different vegetable oils linseed oil (FAME-LO) and soybean oil (FAME-SO) have been used as drying oils. The FAME-based Cyan offset printing inks have been prepared their properties compared with standard conventional inks. Printing tests were carried out using the IGT-A2 printability tester. Contact angles of water, methanol, and hexane on the surface of printed ink were measured using Contact Angle Analyzer. The surface free energy (SFE) and its components were calculated using Girifalco-Good-Fowkes-Young, Owens-Wendt, and van Oss-Chaudhury-Good methods. The results showed that as the liquid contact angle increased, the surface energy decreased. The surface energy of FAME-SO ink printed samples 36.36 mJ/m2 was higher than the unprinted paper 35.84 mJ/m2. Since high surface energy will affect the bond strength of the ink to the substrate, this will be an advantage for multicolor prints requiring good ink adhesion, which will enlarge the acceptance of other colors to be printed on the previous color. [ABSTRACT FROM AUTHOR]

This paper is about paper or journal review of two-phase flow boiling pressure drop in propane (R290) refrigeration system and summarized several researches that will useful in terms of HVAC-R equipment especially in heat exchanger i.e., evaporator design. Early researcher has been conducted research with respect to the channel dimension (diameter and aspect ratio) as in Coleman (2000). Recent research of flow boiling with combined parameters such as heat transfer coefficient (HTC) and pressure drop shown that some parameters affected pressure drop inside unconventional channel (mini and microchannel) such as superficial vapor velocity, mass quality, mass flux, heat flux, saturation temperature (and pressure), and Reynolds number where flow regime of the pressure drop are mostly annular flow, intermittent flow, slug and churn flow but less or few of them found a relation of channel dimension i.e. diameter and aspect ratio towards two-phase flow pressure drop (as in Coleman (2000)). It is recommended that for further study and research, study of two-phase flow boiling pressure drop must conduct in the unconventional channel such as minichannel or microchannel i.e., capillary tube and incorporate Reynolds number of the flow (both vapor and liquid), channel dimension (diameter and aspect ratio), surface tension, and shear stress influence from two-phase flow fluid and then plot the data to the recent and or existed flow pattern map of any flow regimes especially to the refrigerants ones. [ABSTRACT FROM AUTHOR]

Neo vernacular is a modern architectural style inspired by traditional vernacular buildings. The concept of neo vernacular architecture is a continuance of the Klaten people's ancient identity as part of Javanese culture, particularly in Central Java. One technique to construct architectural works founded in the local culture is to look for values rooted in Javanese culture. This paper is the product of a final project whose goal is to develop a sustainable architectural identity in Klaten based on local wisdom, which will be applied to the "nadir" transit hotel. This transit hotel should be able to accomplish the goal and objective of a successful Klaten city with devoted, intelligent, autonomous, and cultural citizens. The location, 53 meters south of Klaten Station, is one type of development of supporting facilities for the commuter line scheme. This is one of the KAI activities at Klaten Station that attempts to make it easier for visitors to obtain long-term support. Folk architecture gives rise to vernacular architecture, which evolves from it. It arose from and was entrenched in the ethnic community's traditions, and skilled craftsmen built it with years of expertise. The gunungan and Klaten limasan house concept is an alternative that is integrated with contemporary design to create a transit hotel with a character that may reflect the city of Klaten's identity as an independent and cultured district. [ABSTRACT FROM AUTHOR]

Artificial Intelligence (AI) and Machine Learning (ML) transforming the Insurance industry by improving efficiency, reducing costs, and providing a better customer experience. As these technologies continue to evolve, more innovation can be expected in the Insurance industry. A Bibliographic analysis is conducted for scientific mapping based on 1,084 SCOPUS-indexed publications between the year 2000-2022 using VOSviewer Application. The Analysis was conducted based on Publications by year, Source, Author, Affiliation, Country, Type, Subject Area and Funding Sponsors. The research found the result, the year 2022 had the highest publication of 203, through documents per year by the source of Lecture Notes In Computer Science Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics at 43 publications, Bauder, R.A. author is the maximum contributor, Harvard Medical School has been the major affiliate, United States of America, has the maximum 341 publications, Conference paper has the majority participation at 412 documents at 38 percent and Keywords "Artificial intelligence", Machine Learning" and "Insurance" has the highest occurrence. The maximum number of publications inthe field of computer science at 28 percent. Overall, this bibliographic analysis provides a comprehensive overview of the current state of research in AI and Machine Learning in the Insurance industry and highlights the potential for further innovation and development in this field. [ABSTRACT FROM AUTHOR]

In recent years a new type of pavement has gained popularity in the United Kingdom this type is called Semi flexible Pavements (SFP). It consists of porous asphalt with high air voids between (25-35) % and is filled with cementitious grout materials. SFP is a combination road surface that incorporates the effects of both porous asphalt and cement paste grout. In addition it has proven to function well in strongly loaded freeways and airport pavement. The primary goal of this research was to assess the performance and durability of SFP contained sustainable grout material. The Reed Waste Ash (RWA) was adopted as a partial replacement for conventional grout material and Ordinary Portland cement (OPC) used in SFP. Also superplasticizer (SP) was used to improve the fluidity of grout and waste paper fiber (W-PF) was used as a modifier for asphalt binder. The indirect Tensile Stress (ITS) and Tensile Strength Ratio (TSR) tests were used to evaluate the resistance of new SFP to cracking and moisture susceptibility while the wheel track test was used to assess the resistance to permanent deformation. The results showed that the SFP containing OPC+10% RWA enhanced the moisture susceptibility of SFP up to 83.52 %. In addition, the result of the abrasion test of the SFP mixture containing OPC+10%RWA gives a great improvement, reached to 55% and 88% for unaged and aged specimens, respectively, when compared to the control mix. The rutting resistance was improved by 85% for the above mentioned replacement. [ABSTRACT FROM AUTHOR]

One of the biometrics that is used to analyze and measure the features of any individual for security and authentication purposes is the fingerprint. purposes, and it is one of the most grown biometric types and considered legal proof of guide in a court of law all over the worldwide. The techniques that is used to find the matching between different fingerprint images have been varied Over the past few years, the researcher in this topic use several methods to extract the essential features, and use these features as input to different matching techniques in inked fingerprint recognition system.in this paper we will discuss in details the contents of fingerprint recognition system and how it is work and a several number of techniques and methods used by the researchers in this top and we made a compression between the widely used techniques to reach the best in terms of accuracy. [ABSTRACT FROM AUTHOR]

In order to accommodate the country's growing population, the number of apartment complexes has increased dramatically. Most new apartment complexes include a variety of modern amenities such as a supermarket, a medical centre, EV charging stations, vending machines, and many more. To use these amenities, we normally need to have a credit or debit card, or even cash on hand. Also, there are numerous identity and government cards that a person must carry with them at all times. Keeping track of all these cards can prove to be quite tedious and time-consuming. Furthermore, the majority of these apartments feature the standard lock and key method of unlocking the doors of the residing occupants which adds to the load of carrying about house keys along with all of the other cards. Life would be so much easier if we could replace all of these numerous bank cards with just one. Using a single card to access all services, such as EV charging or purchasing items, and even as your home door key. With the tap and go feature, the user does not have to pay at the same time but can make a payment all at once when the statement arrives at the end of the month, saving both time and keeping track of all transactions with ease. Hence, we propose in this paper a smart card that uses RFID technology to access all of the many amenities in apartment complexes. [ABSTRACT FROM AUTHOR]

The Tele care medicine information system (TMIS) enable patients to gain admission to healthcare services over long distances. Patients and physicians seek medical information over an unsecured public channel. On the one hand, storing medical information in servers facilitate medical diagnosis, thereby, optimizing the use of digital health assets while on the other hand data is susceptible to various attacks. Thus, it is necessary to ensure data privacy, integrity, and confidentiality in TMIS system. Multiple approaches have been suggested for this purpose to authenticate the medical data, but there is still a systemic gap that has to be filled. In this paper, we will show the future scope of tele-medical healthcare and that is metaverse. Metaverse is a combination of digital technologies like virtual reality, augmented and physical reality. It has a role in healthcare as metaverse technology will provide more accurate data within the virtual world. [ABSTRACT FROM AUTHOR]

The paper describes a smart home control system, which includes lighting, microclimate and security subsystems, as well as control algorithms for various operating scenarios. The process of the system operation is described in detail, the visualization of the system is presented in the form of a 3d model. The article shows the practical significance of the system, describes its functionality. The work is of undoubted relevance, since the introduction of a house management system can improve conditions of life and achieve high energy efficiency rates. The article presents in detail each element of the control system, namely: a control device, a control object, a set of sensors. On the example of the lighting subsystem, the process of creating the entire automated control system is described. An algorithm for automatic lighting operation is obtained and described. To control the system, a human-machine interface was developed in the OpenHab program. A panel with indicators of the light sensor is presented, its functionality is described. [ABSTRACT FROM AUTHOR]

The potential of Waste paper sludge (WPS) and cockle shell (CS) as an alternative composite absorbent has been investigated to obtain the optimum mixing ratio in removing two working parameters such as ammonia nitrogen (NH3-N) and COD. Both WPS and CS were mixed together in different ratio. The absorption batch study includes the preparation of 5g composite adsorbent, 200 mL of raw leachate sample at pH 8.64, with a shaking speed of 200 rpm for 300 minutes at room temperature. The result shows, the optimum ratio obtained for composite mixture absorbent is (1:7) and the concentration capacity achieved for the ratio was 502 mg/L and 540 mg/L for NH3-N and COD. The percentage optimum removal is 50.20% NH3-N and 81.25% COD respectively. The optimum pH and absorbent dosage expressed the result at pH 7 and 50 g with the percentage optimum removal value is 50.10% NH3-N and 88.89% COD; and 503 mg/L NH3-N and 320 mg/L COD; and 51.98% NH3-N and 89.51% COD; and 484 mg/L NH3-N and 302 mg/L COD, respectively during the experiment. [ABSTRACT FROM AUTHOR]

Rice straw can be an alternative material for producing great pulp and paper also can be produced by several variations of the pulping process. This study was conducted to prepare and evaluate the hydrophobic rice straw pulp soda using atmospheric hot soda (AHSP) and soda (SP) pulping methods and modified with water-soluble chitosan treatment. The pulps were modified with water-soluble chitosan treatment at 1% and 2%. The screen pulp yield, kappa number, and delignification selectivity were analyzed to evaluate the properties of the pulp, while hydrophobicity properties were evaluated by its water absorption capacity and wettability. The FTIR was used to investigate the possibility of a new functional group formation after modification. The screen pulp yield of AHSP (29.22%) was relatively higher than SP (21.94%). However, SP pulp has a lower kappa number with higher delignification selectivity than AHSP pulp. After pulp modification, the hydrophobicity of the modified pulp increases in line with the increasing concentration of water-soluble chitosan. The AHSP pulp with a 2% water-chitosan treatment has the highest hydrophobicity indicated by the lowest water absorption capacity at 60 minutes i.e 41.99%. Therefore, based on hydrophobicity analysis, AHSP and SP modified with a 2% water-soluble chitosan treatment have better hydrophobicity. [ABSTRACT FROM AUTHOR]

Polar code is a class of linear error-correcting codes that may demonstrably achieve the capacity of discrete memoryless channels. In the last decade, they have piqued the interest of industry and academia, such as the 5G (5th generation) wireless communication system standardization process. Although polar codes are proven to achieve the Shannon limit, their performance degrades at finite-code lengths, particularly in low signal-to-noise ratio (SNR) environments. So in a regime with finite _length, the performance of polar code may be improved by several techniques, such as Turbo Polar Codes (TPCs). Various Soft_in_Soft_out (SISO) decoder techniques, such as soft_cancellation (SCAN), belief_propagation (BP), and soft_successive_cancellation_list (SSCL) can be utilized in TPC. On the other hand, using a simple scaling factor scheme to minimize the overestimation of extrinsic information and its correlation with intrinsic information can further improve performance. Different termination techniques are proposed in the literature to reduce the required number of iterations, especially at high SNR. Error detection and correction systems are utilised to reduce energy consumption. This paper reviews some of the recent decoding techniques used in TPC. [ABSTRACT FROM AUTHOR]

Paper Correlation is the study of creating an automated machine to assess the relationship between two or more papers. This study continues to develop in the natural language processing field. In this paper, we begin to enter into this study by conducting research to find the relationship between two citation sentences. The citation sentences contained in the paper can be used as a basis for assessing the relationship between two papers. In this research, the semantic similarity between citation sentences is included in.8 semantic classes. We use the Recurrent Neural Networks method and its variations and use SMOTE to deal with imbalanced data. The data representation that we use is word2vec to convert the sentence into a vector. We develop this research by adding data to see the algorithm's capabilities from previous research. [ABSTRACT FROM AUTHOR]

Lead is a heavy metal that can have a negative effect on human health. Lead enters the human body through the respiratory tract, gastrointestinal tract, and skin. Food can be contaminated with lead if the packaging is not proper, for example, salabulek wrapped in typed paper can enter the body. This study aims to prove the presence of lead content in salabulek sold at Pasar Kota Pariaman due to the use of typed paper as wrapping. This research method is descriptive and was conducted at the Water Laboratory, Faculty of Environmental Engineering, Andalas University. The number of samples was 24 samples consisting of 12 samples of salalauak wrapped in typed paper and 12 samples not wrapped in typed paper using total sampling technique. Sample examination using ICP (Inductively Coupled Plasma). The results showed that all salabulek sold by traders at Pasar Kota Pariaman were positive for lead, both wrapped in typed paper and unwrapped. The average lead content in packaged salalauak was 0.172 ppm and unwrapped salabulek was 0.167 ppm. Conclusion. All samples of salabulek contained lead metal and there was an increase in lead levels due to packaging. [ABSTRACT FROM AUTHOR]

Used food paper in strips shape were mixed in a different weight percentage 1,2,3,4 respectively with epoxy resin. Discs of 10 cm diameter and 0.8 cm thickness were prepared in a hard shape. The thermal conductivity were tested for each combination showing that the maximum value of 0.989 w/m.°c signed at the combination (Epoxy 6 – Paper 4) Wt.%. And the mechanical properties representative by the hardness reflect the same behavior and recorded the maximum value of 80.21, meanwhile the surface roughness follow the other values in same manor with maximum value 0.50 µm. The increasing in used paper content showing that this increasing will lead clearly to improve the thermal and some mechanical properties of epoxy resin. [ABSTRACT FROM AUTHOR]

The construction of a new road has many environmental consequences, as it consumes a significant amount of materials and energy. Additionally, the price of crude oil, which is the primary source of the bituminous binder has climbed dramatically in recent years. These factors have caused a rise in the overall cost of asphalt pavement. An effective way to increase the asphalt mixture industry's long-term viability while also decreasing costs is to develop new materials and technologies that use recycled and environmentally friendly resources in the manufacturing process. The primary goal of employing waste materials as modifiers such as Shredded Paper Fibers "SPF" is to improve performance, save resources, protect the environment from pollution and study the influence of content and sizes on the properties of pure bitumen. The "SPF" was individually mixed with pure bitumen binder at a proportion of (0.25, 0.5, and 0.75) % from the weight of bitumen using two different sizes (14×6×1) mm and (7×3×1) mm. Several tests were conducted to assess the properties of the developed binder such as penetration, ductility, softening point, penetration index, and viscosity. The results showed that the modified asphalt binder has fewer values of penetration and ductility by 50 % and 51% respectively compared with pure bitumen for the smallest size of "SPF". The use of these modifiers leads to an increase in the penetration index to 0.47 and viscosity to 2.5 times when used smallest size and percent of 0.75%. The use of these modifiers leads to an increase in the penetration index to 0.47 and viscosity to 1.8 times when used smallest size and percent of 0.75%. The knowledge gap in this study suggests an alternative for cellulose fibber from waste recourse, however, the shredded paper is suggested as a stabilizer to asphalt used for Semi-Flexible Pavement "SFP", and where drain down is recognized obviously with neat asphalt. The results also demonstrated that enhanced asphalt binders might significantly alter the characteristics and performance of asphalt mixtures. [ABSTRACT FROM AUTHOR]

A concept of the smart contract powered by Ethereum has raised the attention of investors in the crypto-currency market in the light of the distributed account book techniques in the Era of Blockchain 2.0. Based on the digitalization of the financial tools, smart contract adopts the smart validation and execution of the computation protocols extending the blockchain to the application level of use to reinforce the security and transparency of transaction deals. This paper aimed to investigate the principle, functions, ground mechanism of the smart contract, and protection approaches and evaluated the security issues existed in the investment process. Lastly, the paper summarized the Smart Contract design and development, loopholes, and protection approaches in the Smart Contract applications. [ABSTRACT FROM AUTHOR]

Water is the most consumed matter in the world. 97% of water is saline which cannot be used easily for domestic purposes and the water which can be easily treated is limited as the groundwater table is depleting due to irrigation purposes and water consumption is rural areas. To solve this issue, we must focus on surface water resource such as rivers, rivulets etc. For using such source there should be a meticulous quality audit of substantial water samples of that source to properly ensure suitability for domestic water use. Hence it is conspicuous that water quality is very imperative. For a rational and scientific analysis of water quality, there should be a mathematical parameter. For that matter, we have a water quality index to ensure rationality during the quality audit. We shall include pH, TDS, alkalinity, hardness conductivity, turbidity, dissolved oxygen, chlorine content, fluorine content etc. [ABSTRACT FROM AUTHOR]

Blockchain is a decentralised peer to peer ledger of data. It provides features like Immutability, Transparency, and Trustworthiness. Due to all the benefits, blockchain can have a great impact in the field of education. In education, there is already a growing problem of fake certificates. Blockchain can prove to be a great solution to solve this issue. For this purpose, we took a deeper look at what is blockchain and what is being done in the education domain with regards to storing certificates and verification of them using blockchain technology. In particular, we explored how Smart Contracts can be used to provide storage for certificates. Finally, we looked at the challenges in adopting blockchain-based solutions. [ABSTRACT FROM AUTHOR]

Species producing raw material for pulp and paper that can be grown in the high altitude lands are still limited. One of the potential species for this area is Eucalyptus urophylla. Tree breeding strategy by a progeny test is performed to increase its productivity. The initial selection is implemented at the nursery level by assess the variation of family (mother trees' progeny) (F1). The research aimed to determine the F1 variation by the growth performance of 6 months old F1 seedlings. Samples consisted of progeny from 27 family originated from provenances of East Nusa Tenggara, Indonesia. Indicators of growth performance and determination of rankings are assessed from the seedling's diameter, height, and robustness. The results showed that E. urophylla had high growth performance variation. Based on their growth performance, the best seedlings were from the family of A25, A27, A23, A19, A20 and A21. Genetic diversity among F1 categorized moderate, based on heritability of height (H2=0.37), diameter (H2=0.45) and robustness (H2=0.6). Coefficient of genetic variance (CGV) and coefficient of phenotypic variance (CPV) are more than 20%, and 27 mother trees are divided into 4 clusters. The existence of genetic diversity at the seedling level becomes the material for further testing in the field. [ABSTRACT FROM AUTHOR]