Search

This paper proposes increasing the width of the discharge channel to improve the specific impulse of Hall thrusters. In our study, we significantly increased the achievable channel width by optimizing the magnetic circuit topology, and the design freedom of the Hall thruster was improved. A prototype of a wide-channel high-specific-impulse Hall thruster was designed and experimentally verified. The effects of channel width on the discharge process and the characteristics of an aft-loaded magnetic field Hall thruster were investigated. The high-intensity luminous region did not diffuse radially with an increase in the channel width, and the plasma was always concentrated near the channel centerline. A wider channel is more conducive for improving the propellant utilization efficiency, thereby effectively improving the specific impulse of the Hall thruster. By optimizing the discharge channel width, the upper limit of the discharge voltage was increased, and the maximum specific impulse was increased from 3170 to 3794 s, a relative improvement of 20%. The effect of the specific impulse improvement at the same discharge voltage was analyzed and discussed. The results of this study are significant for the design of high-specific-impulse Hall thrusters. [ABSTRACT FROM AUTHOR]

The theoretical specific impulse of Hall thrusters using a krypton propellant is much higher than that of those using xenon. However, the actual benefits of this improvement are limited by the difficulty in achieving krypton atom ionization, and its efficiency is much lower than that of xenon. In this study, the anode specific impulse and anode efficiency of Hall thrusters using krypton propellant were improved by adding a small quantity of xenon. A dual-channel supply of xenon and krypton was achieved by optimizing the discharge channel structure based on the design of the aft-loaded magnetic field. The effects of the xenon and krypton supply method and xenon fraction on the discharge characteristics of the Hall thruster were investigated by conducting discharge experiments using the mixed propellant. The results indicated that injecting a small quantity of xenon significantly improved the ionization of krypton, improved the ionization and acceleration efficiency of the thruster, and fully utilized the high specific impulse characteristics of krypton. Furthermore, the addition of a small quantity of xenon also significantly increased the upper limit of the discharge voltage for stable operation using krypton from 500 V. At the maximum tested xenon fraction, the maximum discharge voltage was loaded to 900 V. At a discharge voltage of 800 V, the optimal anode efficiency and anode specific impulse increased by 4.5 % and 534 s, respectively, compared with those for pure xenon propellant (with an anode efficiency of 54 % and anode specific impulse of 3034 s). The results of this study are of great significance for the design of high-efficiency, high-specific-impulse, and low-cost Hall thrusters. • A dual-channel gas supply structure is proposed, which can supply two kinds of gases into the discharge channel individually. • Thruster performance is optimal when krypton is supplied downstream and auxiliary xenon is supplied upstream. • High-voltage operating ability under krypton is greatly improved with the assistance of a small quantity of xenon. [ABSTRACT FROM AUTHOR]

In this study, the effect of pulse frequency on the discharge and plume characteristics of Hall thrusters under pulsating operation is investigated. The experimental results show that the discharge current and thrust decrease as the frequency increases to the range of 30–90 kHz. The efficiency of the thruster is negatively correlated with the pulse frequency, and the pulse frequency minimally affects the plume divergence angle and ion current. It is found that an increase in the pulse frequency decreases the secondary electron emission flux on the wall and the near-wall conduction rate of electrons in the channel, thus consequently decreasing the electron current. An increase in the electron current share improves the current-utilization efficiency. In addition, as the frequency increases, the ion power loss on wall increases and the ion acceleration becomes less effective, thus resulting in a decrease in thrust. The combined effect of these two factors results in an increase in the anode efficiency as the frequency increases. • The effect of pulse frequency on the discharge and plume characteristics of Hall thrusters under pulsating operation were investigated. • Increasing the pulse frequency decreases the secondary electron emission flux, which reduces the rate of electron-in-wall conduction in the channel, thus resulting in a lower electron current. • As the pulse frequency increases, the ions power loss on wall increases leading to poorer ion acceleration and a reduction in thrust. [ABSTRACT FROM AUTHOR]

Electric propulsion systems with high-specific impulses have replaced chemical propulsion systems in many space missions. The aft-loaded magnetic field technology of Hall thrusters moves the ionization and acceleration processes downstream of the channel by varying the magnetic field distribution. Consequently, ion bombardment of the channel walls is inhibited, and the service life of the Hall thrusters is substantially increased. However, neutral gas leaks because of the rapid diffusion near the channel outlet, where strong ionization occurs. Thus, the propellant atoms are ionized insufficiently, resulting in a decline in the performance. Therefore, an aft-loading design for the neutral gas flow field was developed to optimization distribution of the neutral gas in this study. A 1.5 kW Hall thruster was verified experimentally. The experimental results show that the aft-loaded neutral gas flow field significantly improved the ionization and acceleration processes. The propellant utilization efficiency increased by 4–8% within the discharge voltage range of 300–900 V. The ion energy distribution moved toward the high-energy direction significantly, promoting an overall improvement in the performance, with a thrust increase of 7.3–11.5 %. The anode efficiency increased from 49–57 % to 58–61 %. The results of this study are significant for the design of high-performance, long-life Hall thrusters. • The aft-loading design of gas flow is realized using the special topology of the hybrid-wall Hall thruster. • The ionization distribution of aft-loaded neutral gas flow field is concentrated in higher potential region. • The aft-loaded neutral gas flow moves the ionization region downstream of the channel. [ABSTRACT FROM AUTHOR]

Poor performance limits the wider application of 100-W-power class Hall thrusters. The effects of position matching between the anode and the zero-magnetic-field region (ZMFR) on the discharge process and performance improvement of 100-W Hall thrusters were investigated. The experimental results demonstrate that appropriately widening the ZMFR downstream of the anode improves the ion current and thrust, promotes plume focusing, and optimizes thruster performance. The thrust and anode efficiency is enlarged by 7.6 % and 20 % (relative value), respectively, when the ZMFR downstream of the anode is expanded by 0.2 L (L is the channel length). The simulation results indicated that widening the ZMFR promoted the expansion of the high-ionization zone to the bottom of the channel, and increased the overall ionization rate. Moreover, as the ZMFR increases, the effective ion acceleration voltage increases. However, widening the ZMFR also aggravated the ion-wall interaction and reduced the propellant utilization rate. Therefore, the performance of the thrusters exhibited an optimal range as the length of the ZMFR increased. In addition, increasing the ZMFR did not affect the life of the thrusters. • The effects of position matching between the anode and zero magnetic field region on discharge characteristics are studied. • The discharge characteristic parameters of thruster with different lengths of ZMFR downstream of the anode are given. • Appropriately increasing the ZMFR can improve the ion current and thrust, thereby improving the anode efficiency. • The position matching between the anode and ZMFR affects the ionization process and propellant utilization ratio. [ABSTRACT FROM AUTHOR]