Search

The current trend in the asphalt industry is to increase the utilization of recycled asphalt pavement (RAP). In general, there are two types of RAP binder in RAP aggregates, the mobilized RAP binder and the immobilized RAP binder. The former can be blended into the virgin binder to coat aggregates during asphalt blending, while the latter can be treated as black rocks because they have already become an outer crust of RAP aggregates. Studies have focused on the mobilized RAP binder quantification and the significance of mobilized RAP binder to mixture performances. However, it remains unknown whether the immobilized RAP binder affects mixture performances. This study developed a laboratory procedure for immobilized RAP aggregates preparation and investigated the contribution of immobilized RAP binder to asphalt-aggregate interaction as well as the performance of 100% recycled asphalt mixtures. The work of adhesive energy and the K-B-G* model were adopted to characterize the asphalt-aggregate interaction for asphalt mortar. Resilient modulus and dissipated creep strain energy were used to evaluate the stiffness and cracking resistance of 100% recycled asphalt mixtures. Results showed that the immobilized RAP binder can strengthen the asphalt-aggregate interaction and improve the cracking resistance of 100% recycled asphalt mixtures by increasing total asphalt content. However, if the total asphalt content remains the same, the immobilized RAP binder increases stiffness but decreases the cracking resistance of 100% recycled asphalt mixtures. [ABSTRACT FROM AUTHOR]

Research on the aging process of styrene-butadiene-styrene block copolymers (SBS) block copolymers modifier has practical significance in guiding the recycling of SBS-modified asphalt pavement. The objective of this study is to investigate the aging process of SBS modifier under various oxygen and thermal conditions to address the variations of physical properties and chemical reaction during the service life of recycled asphalt pavement (RAP). In the proposed testing process, SBS modifier was thermal oxidative and vacuum thermal aged at different temperatures and time prior to blending with base asphalt to prepare SBS-modified asphalt. SBS modifier was first dissolved by carbon tetrachloride (CCl4) and then tested through infrared (IR), gel permeation chromatography (GPC), and thermogravimetric (TGA) tests to investigate the variations on microstructure and chemical compositions of aged SBS modifier. The effect of aged SBS modifier on performance of SBS-modified asphalt was evaluated by comparing the mechanical and chemical properties of base and SBS-modified asphalts. Based on the results of the experimental program, appearance variation, modifying effects, and chemical reaction of SBS modifier under oxygen condition were obviously different from that of vacuum condition. The chemical reaction of SBS modifier was not significant at vacuum and high temperature condition, instead, a small amount of degradation was observed. Degradation of mechanical performance of SBS-modified asphalt was mainly caused by aging of base asphalt. Therefore, the SBS modifier in the RAP was suggested to be considered in the mixture design. [ABSTRACT FROM AUTHOR]

With the continuing increase in the use of recycled asphalt pavement (RAP) and recycled asphalt shingle (RAS) for highway construction, there is a concern over how much of the aged asphalt binder inside RAP/RAS can be blended into virgin asphalt binder. In this study, the RAP/RAS binder mobilization rates of 13 different mixtures produced by three different types of asphalt plants in Tennessee were determined using fluorescence microscopy and gel permeation chromatography (GPC). A multiple regression model was developed to explore the factors critical to enhancing the mobilization rate of the RAP/RAS binder. Results showed that the RAP/RAS binder mobilization rate was significantly lower than 100% for most mixtures, indicating that only part of the RAP/RAS binder was mobilized during the production process. The mixing and delivery temperatures had significant influence on the mobilization rate of RAP/RAS binder. In addition, the aging degree of RAP/RAS binder also significantly affected the mobilization rate. [ABSTRACT FROM AUTHOR]