Search

The increasing pressure on natural resources and the climate has been noted by businesses and governments worldwide, who now face the difficult task of integrating paths of environmental sustainability and economic growth. One promising approach to sustainable development, reducing the pressure on natural resources and solving waste problems is circular economy. From different ways of implementing circular economy, this study focuses on the productization of industrial side streams, which carry a great deal of underutilized potential. In this article, the productization of pulp and paper industry side stream, fiber sludge, for commercial use as a dust-binding agent is studied via a descriptive, in-depth case study. Apart from inconsistent quality, fluctuating supply, cost of storage and logistics, what makes industrial side stream utilization challenging is the lack of knowledge that stakeholders have about side streams and their utilization and the lack of new value chain development for their commercial use. Therefore, it is essential for all parties involved to have a clearer vision of what is being sold for what purposes, through productization. This study found that the productization of side streams follows the same steps as the productization of any other traditional product, and the productized side streams can be added to the company's product portfolio as by-products. [ABSTRACT FROM AUTHOR]

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

The production of CaO for lime-based plaster and render generates 1.2 t CO 2 /t CaO, consumes 1.78 t CaCO 3 /t CaO. This research paper examines the environmental and economic performance of upcycling paper mill sludge (PMS) and carbide lime (CL) as replacements for hydrated lime (HL) in lime-based plasters production. For this, a new Cradle-to-Gate industrial-scale inventory is designed, upscaling recent lab-scale innovations, investigating PMS and CL treatment processes, followed by a Cradle-to-Grave scenario analysis. The results show that incorporating CL in the plaster yields better environmental and economic outcomes compared to PMS. The intermediate treatment for CL is cost-effective and has low carbon emissions. The upcycling of CL eliminates 100% of CO 2 emissions, while PMS reduces emissions by 11%. The production of the traditional binder HL is more expensive than upcycling PMS (+69%) and CL (+65%), with carbon taxes accounting for 35%, 44% and 15% of production costs, respectively. The effect of an equilibrated carbon price to ensure fair market competition, considering the natural carbonation of lime (carbon credit) is discussed, and the cost assessment reveals a 47% and 54% reduction for upcycled plasters using PMS and CL, respectively, compared to traditional HL. [Display omitted] • Availability, properties, and treatments of secondary lime resources. • Industrial-scale inventory for upcycling carbide lime (CL) & paper sludge (PS). • Cradle-to-Grave assessment: CL reduces CO 2 most, trailed by PS and hydrated lime. • Key factors for Cradle-to-Grave impact: lime kiln heat consumption (PS) and drying operation (CL). • Cost analysis of carbon taxes and credits across the material's life-cycle. [ABSTRACT FROM AUTHOR]

This paper describes the role of Design Thinking (DT) in the context of sustainable development (SD), based on a perceived research need to identify the features which may characterise its deployment, and identify ways via which it may be optimised, especially in the implementation of the United Nations Sustainable Development Goals (UN SDGs). The main goal of this study is to examine the connection between DT and SD and showcase examples of what has been done to deploy it, using real-case situations. From a methodological perspective, the paper deploys a set of two methods: bibliometric analysis and case studies. Among other findings, the paper shows that DT can be used to help implement the UN SDGs by providing an approach that emphasizes human-centered design. This includes identifying problems, creating user-friendly solutions, and testing them in order to ensure that they are effective. Also, by using DT, companies, organisations, and governments can create low-cost, high-impact, and sustainable solutions to help achieve SDGs such as SDG8, SDG9, SDG12, and SDG13, among others. Overall, DT provides a framework for combining creative and analytical reasoning, specific mindsets, and diverse hands-on tools and techniques to improve critical thinking abilities towards sustainability challenges. The novelty of the paper relies on the fact that the combined use of the two methods allowed the identification of some useful features of DT, which may facilitate its deployment in sustainability contexts. This may assist future studies since it provides a theoretical basis for the field. • Research gaps in DT prevent its widespread use in SD. • The paper deploys bibliometric analysis and case studies. • DT within a circular economy is an emerging approach. • DT may foster sustainability practices. • A novelty is the identification of pathways to optimise DT in SD. [ABSTRACT FROM AUTHOR]

[Display omitted] • Microwave-assisted pyrolysis is a promising method for biomass/waste valorisation. • Life cycle analysis shows reduced energy consumption, low global warming potential. • Innovations in reactor design and operation parameters aids in cost reduction. Microwave-assisted pyrolysis (MAP) has been perceived as a promising technology for biomass and waste conversion due to its distinctive features, including fast, even, and precise heating. This results in higher energy efficiency when compared to conventional pyrolysis via thermal heating. However, the scaling up of MAP of biomass and waste poses challenges, with investigations ongoing to uncover not only the technological aspect, but also both the environmental impacts and economic feasibility associated with this process/technology. The possible environmental impacts associated with MAP processes can be analyzed through systematic life-cycle assessment (LCA), while the economic feasibility can be evaluated via techno-economic analysis (TEA). This paper presents an overview of the current research trend in MAP and the products produced, as well as the LCA and TEA of the pyrolysis technologies. The LCA study reported a 2.5 folds reduction in energy consumption and up to 62% reduction in global warming potential. TEA study revealed that conventional pyrolysis has a greater profit for long-term assessment due to a higher maturity and less complexity technology; however, MAP may be more economically feasible in the future owing to the increased maturity and more established technology. Finally, the challenges and future perspectives for LCA and TEA in MAP are elucidated. [ABSTRACT FROM AUTHOR]

The 17 Sustainable Development Goals (SDGs) defined by the United Nations represent a blueprint for the adoption of global practices and policies to foster sustainability in societies and increase efficiencies in resources uses. The Italian National Trust, FAI, has embraced these goals, developing a holistic and transdisciplinary methodology to promote a more sustainable approach to preserve its natural and built heritage. This methodology combines heritage protection with the SDGs in various macro-areas of interventions, including energy, water, biosphere, responsible consumption, and sustainable communities. The aim is to increase access to affordable and clean energy, reduce water, waste, and soil footprints, promote responsible consumption, and develop human capital. The paper proposes a set of strategies to achieve the SDGs in heritage, involving the collaboration of several stakeholders, ranging from institutions to citizens. The methodology is applied to a specific Italian case study, Casa Macchi in Morazzone, to highlight the challenges in achieving the dual objective of preserving the historic building and promoting sustainability in the built environment. [Display omitted] • We propose a trans-disciplinary methodology for sustainable heritage preservation. • The heritage preservation project is analyzed in five macro-areas of intervention. • Assessment of effects on energy, water, biosphere, resources, and sustainability. • Casa Macchi preservation project to apply methodology and prove effectiveness. [ABSTRACT FROM AUTHOR]

Emerging industries and technologies are made up of objective, practical requirements and ideas that encompass broad hopes for what future newness might enable. The bioeconomy is one such emerging industry. Its recent evolution has involved a complicated and dynamic mix of promises, reality checks and subsequent ambivalences. This article frames and investigates the emerging algae-based bioplastics industry as one niche within this broader system envisaged for social, technological, economic, political and ecological change. As such, our paper presents two categories of knowledge that in practice interrelate: 1) specific and practical recommendations that can assist a future algal-based bioplastics industry to develop in Australia in ways that are conscious of socio-ecological and socio-cultural dimensions, and 2) critical extensions that go beyond the attributes of newness, impact, suddenness and universality often emphasised in both popular and scientific research into emerging green technologies. In particular, our analysis highlights the importance of specific temporal, tonal and spatial factors when framing the contextual factors associated emerging industries, technologies and the different pathways for change they might help support. • Pathways and enabling factors for a algal-based bioplastics industry in regional Australia are presented. • The 'social idea' of the bioeconomy is analysed with reference to algal-based bioplastics. • The algal-based bioplastics industry is contextualised in relation to transition pathways literatureon the bioeconomy. • Themes and recommendations are synthesised from literature review and semi-structured interviews. [ABSTRACT FROM AUTHOR]

Circular Economy (CE) is a promising solution for a wide range of stakeholders, including companies, governments, and society at large to confront serious environmental concerns (Crome et al., 2023) to address resource depletion, environmental degradation, and waste generation. As Cambodia's economy heavily relies on resource extraction and export-oriented industries (e.g., textile industry and agriculture contributing significantly to GDP), it generates substantial waste (fundamentally, Municipal Solid Waste (MSW), but also industrial, construction and demolition waste (UNDP, 2022a,b)), and pollution. To tackle such issues, the government has recently demonstrated a stronger commitment to sustainable development by integrating CE principles into a national policy. First, this paper explores the current environmental issues of the country. Secondly, it assessed the country's CE Strategy and Action Plan. Thirdly, as a primary finding, it was discussed the potential barriers, international collaboration prospects, and implementation recommendations to catalyze challenges into opportunities, covering the gaps observed in the country's CE Strategy and Action Plan, and following prominent CE trends. Lastly, it concludes that despite the hurdles, CE has the potential in the country to provide socio-economic benefits, including job creation, resilience, reduced reliance on imports, and improved public health. This paper consisting of policy analysis combined with a bibliographical review presumably represents the first work on this topic; it will be useful for foreign investors, academia, and policymakers. • A contemporary analysis of the most noteworthy environmental issues in Cambodia. • Policy adoption assessment of Cambodia's Circular Economy Strategy and Action Plan. • Discussion with barriers, international opportunities, and recommendations. [ABSTRACT FROM AUTHOR]

Recycling spent lithium-ion batteries is a significant way to achieve life-cycle management and a green circular economy, helping to achieve carbon neutrality. The form of battery pack disassembly has gradually moved away from manual manipulation to a human–robot collaborative process. However, there is no established methodology for assessing spent lithium-ion battery disassembly between the environmental benefits, technical feasibility, and economic viability of human–robot collaborative disassembly (HRCD). To ensure the efficiency and security of HRCD processes, this paper develops a resilience assessment model for HRCD using stability, redundancy, efficiency and adaptation metrics. The resilience assessment theory is used to obtain the internal relations among the resilience indicators of the system. In this work, we evaluate the resilience of HRCD for lithium-ion battery disassembly by integrating fuzzy Bayesian fusion with an analytical network process unfolding cloud. The 2017 Chevrolet Bolt driver demonstrated the feasibility and effectiveness of the proposed approach, which allows greater flexibility in complex tasks performed by humans and robots. In case study, the weights values of stability, redundancy, efficiency and adaptability are 0.340533, 0.161384, 0.203835 and 0.294248, respectively. IR2&HO1 and IR3&HO2 have an assessment value of 93 and 95, respectively, with eigenvalues of 1.28 and 1.23, which are level I. RI3&HO1 and RI4&HO3 belong to level IV, with an evaluation value of 38 and 45, respectively, and a characteristic value of 2.27 and 2.55, respectively. The integrated methodology proposed in this paper could be effectively used by disassembly management, to evaluate the HRCD disassembly scheme resilient strategies for better managing production. [ABSTRACT FROM AUTHOR]

Sustainable development and reducing natural and energy resource consumption are the focus of the policies of many institutions. In this context, livestock farming is one of the major anthropogenic sources of GHG and acidifying gas emissions and requires comprehensive analysis to minimise its ecological footprint. For this reason, it is beneficial to analyse the various processes within this production sector to reduce the consumption of resources, particularly water and soil consumption; reduce energy consumption; and try to valorise the biowaste produced, especially manure, byproducts and wastewater. Reusing residual bioresource and organic waste offers the possibility of valorising a discarded product and, at the same time, reducing the consumption of natural resources. For this purpose, biorefinery processes allow bioresources to be transformed into bioproducts or bioenergy. Therefore, this study investigates the application of biorefinery processes to animal-derived waste, aiming to extract valuable resources while curbing resource consumption. This review analysed 293 scientific papers on biorefinery processes published in the last 11 years applied to livestock biomass to extract relevant information to understand the evolution of this topic and formulate hypotheses regarding future research directions. The analysis strongly emphasizes energy production and a growing interest in insect cultivation. In the coming years, one of the most significant challenges will be the successful transfer of technologies and processes from experimental research to the applied industry. To do this, it will be necessary to reduce costs, exploit economies of scale, improve process management, and develop synergies between different industrial sectors to implement smart circular economy systems. Overall, this review aims to clarify the hypothesis driving research in this area and emphasizes the tangible applications of findings within the broader context of sustainable resource management. [Display omitted] [ABSTRACT FROM AUTHOR]

In the realm of sustainable construction within a circular economy, the study of demountable buildings garners significant interest. Achieving the full potential of reusing materials from disassembled structures demands innovative assembly methods surpassing conventional fasteners like nails. Although traditional joinery has addressed this challenge to some extent, it faces design limitations. Modern digital fabrication technologies, such as CNC milling and additive manufacturing, have expanded the horizons for manufacturable assemblies. This paper builds upon prior research to introduce a flexible method for crafting 2D assemblies adaptable to various geometric assumptions. It offers two contributions. Firstly, it provides a versatile numerical model for analyzing the mechanical properties of diverse designs, uncovering novel assemblies with superior mechanical performance compared to traditional configurations. Secondly, it presents an optimization approach enabling precise control over assembly and disassembly of imperfect parts by optimizing joint geometry. By integrating advanced fabrication techniques, adaptable design methods, and mechanical analysis, this research paves the way for the development of sustainable and mechanically efficient demountable buildings. [Display omitted] • A numerical model to systematically evaluate the mechanical behavior of assemblies with strange-looking geometrical features. • A method to robustly optimise assemblies so that they can be (dis)assembled even if the parts have imperfect geometries. [ABSTRACT FROM AUTHOR]

Circular economy (CE) is gaining popularity at different levels with the promise of creating more sustainable processes. In this context, cities are implementing a number of initiatives that aim to turn them into sustainable circular systems. Whether these initiatives achieve their sustainability goals, however, is largely unknown. Nevertheless, as the application of CE strategies is actively encouraged by many policies across the globe, there is a need to quantify the environmental impacts and to identify the strategies that support urban sustainability. This paper analyses the extent to which research focuses on quantifying the environmental balance of CE initiatives promoted at the municipal level. To this end, the analysis scanned CE initiatives reported in cities around the globe and classified them into urban targets and CE strategies. In parallel, the paper conducted a review of the literature that uses industrial ecology tools to account for the environmental impacts of CE strategies. Results show a diverse geographical representation, as reported cities concentrated in Europe, whereas for environmental research, the main results came from China. In general, cities encourage strategies relating to urban infrastructure (47%), with and additional focus on social consumption aspects, such as repair and reuse actions. In comparison, research mainly addressed industrial and business practices (58%), but the approach to infrastructure was similar to that of cities, both with a special interest in waste management. Research has yet to assess social consumption and urban planning strategies, the latter essential for defining the impacts of other urban elements. Hence, there is a need to define the environmental impacts of the strategies that cities select in their quest for circularity. Research and practice can also benefit from working collaboratively so as to prioritize the CE strategies that best fit into the features of each urban area. [ABSTRACT FROM AUTHOR]

• The paper analysed a case study on the monitoring system of an Italian food company. • The study creates a tailor-made environmental Key Performance Indicators dashboard to assess corporate sustainability. • The study investigated rewards systems in the frame of Green Human Resource Management practices. • A final dashboard of around 70 indicators was then created and linked to employees' rewards. Assessing environmental performance, measuring the circular economy and quantifying decarbonization have become crucial in green management in recent years. Both scholars and practitioners have focused on different strategies to create performance indicators capable of tackling all these aspects. At the same time, companies have started connecting managers' and employees' incentives to the achievement of corporate goals. We analysed a case study of an Italian food company which uses environmental performance indicators to assess corporate sustainability and reward managers and employees. Through a series of interviews with members from all departments, we identified around 200 different key performance indicators, i.e., performance, commitment, control, reactivity, economic, consent, transversal and multifunctional. A final dashboard of around 70 indicators was then created and linked to employees' rewards. A tailor-made methodology was, thus, used to define target for the company's management by objectives, taking into account the trend of each indicator. This is the first attempt to investigate how a company can create an environmental performance indicator system to assess corporate sustainability and reward employees through management by objectives. Our study further extends not only the academic literature, but also provides a practical and operative contribution to all the companies that aim to create a new key performance indicator system. Lastly, we merged the management and strategies for promoting green practices amongst employees through a reward system with the environmental performance of each organisational department by creating a methodology to define management by objectives. [ABSTRACT FROM AUTHOR]

The circular economy (CE) is regarded as a new concept to promote sustainable development issues by improving economic, environmental and social goals. Essentially, the key idea of the CE is to assist modern economies to shift from linear economic thinking to a circular one in order to ensure that components of products could have a second use in new products and services. The majority of the relevant literature has focused on the relationship between CE principles and firms. However, to achieve CE principles, data and information from the macro level is also required; something which is currently under examined by the literature. Consequently, a significant gap in this field is the explanation of how the CE affects the macro economy and vice versa. To fill this gap, this paper aims to examine the relationship between a macro-level Circularity Rate and various macroeconomic variables across a sample of 28 European countries employing panel data. The findings suggest a robustly positive relationship between real GDP and the circularity rate over the long-run while higher environmental taxes are associated with an increase in the Circularity Rate. Southern European countries exhibit a significantly lower level of Circularity Rates compared to their northern counterparts. [ABSTRACT FROM AUTHOR]

Industrial Symbiosis (IS) projects are today well known for their contribution to sustainable development. Designing IS projects implies modelling the quantity of material flows between economic components (ECs), in particular to evaluate the environmental and economic gains obtained through more material circularity and use efficiency. The Industrial Symbiosis concept is now being applied to activities distributed over territories much wider than industrial parks. For such setups, existing modelling methods are becoming strained by the number of economic components involved, their dissemination within heterogeneous landscapes and the resulting complexity of the exchanges. In this paper, we propose a generic, spatially explicit simulation model based on stakeholder decision rules to study regional scale flows quantification between ECs in n-n IS networks. Our approach introduces the use of the Gale-Shapley stable matching algorithm for addressing the many-to-many supply-demand matching problem. The method is deterministic and provides stable solutions that optimise the individual objectives of the ECs. A second introduction considers using transport cost along the road network among the decision rules when ECs preferences are ordered. This solves the issue of correctly estimating travel distance in heterogeneous landscapes where it can be significantly different to the distance as the crow flies. We tested the model with the implementation of two real and concrete case studies related to the bioeconomy of a tropical island: (i) collective storage of fodder and (ii) co-composting platforms. The outputs of the model make it possible to compare scenarios based on EC satisfaction relative to supply and demand as well as the total distance travelled along the road network. Finally, we discuss the limitations and genericity of the model to explore diverse industrial symbiosis projects. • Industrial symbiosis material flow modelled using stakeholder decision rules. • Our approach is spatially explicit, determinist and based on interactions. • Stable deferred acceptance matching algorithm used to link economic components. • Decision rules incorporate transport costs estimated based on the road network. • Model tested in n-n networks involving several thousand components at regional scale. [ABSTRACT FROM AUTHOR]

The circular economy (CE) paradigm in its broadest sense is key to our survival as a species. Due to this critical importance, understanding its fundamental limitations is thus of significant importance. Especially understanding the losses to Nature are key as these represent the true limitation to circularity. This requires at the minimum an understanding of the thermodynamics and entropy of the losses. Most CE work as well as the many depictions to date neglect to address this in detail, the many losses are brushed aside. Many texts in CE do not use the words entropy, thermodynamics, mass and heat transfer, technology etc. which all ultimately fundamentally affect both the circularity as well as economic viability of the system. Using lead as carrier for the narrative of this paper, the state-of-the art from technology to the thermodynamics as well as heat and mass transfer, product design, modularity, environmental impact, system simulation etc. will be critically discussed. This will reveal what key knowledge and data is presently missing to achieve the economically viable circularity of materials and products. This paper identifies what should be researched and developed to “close” the circular economy system. It thus provides a “ground zero” or baseline for the evaluation of the true economic viability of the CE paradigm relative to what we are presently achieving in our linear economy paradigm. [ABSTRACT FROM AUTHOR]

The Circular Economy (CE) is currently a popular notion within the policy and business advocacy groups. Despite being visionary and provocative in its message, the research on the CE concept is emerging. The two intertwined objectives of the paper are; first to identify, discuss and develop the various definitions provided by the emerging literature. Secondly, to suggest an initial research approach with which research on CE can be conducted. Our analysis shows that the existing CE work is mainly done on the practical and technical levels of the actual physical flows of materials and energy in production-consumption systems. The focus of the extant literature is on concrete metrics, tools, instruments and computations. Therefore, the basic assumptions concerning the values, societal structures, cultures, underlying world-views and the paradigmatic potential of CE remain largely unexplored. We argue that CE has already become what Gallie (1955) more than six decades ago termed as an “essentially contested concept” (ECC). The paper further suggests a model for CE research that helps in the categorization, classification and organization of research and investigation on CE. The model can help in limiting the observed unbalance and enhance the contribution of the CE approach to a more sustainable global society. [ABSTRACT FROM AUTHOR]

To promote their public image, a growing number of companies have adopted corporate social responsibility (CSR) projects that benefit various social interests. As such, it is imperative to audit the social, environmental, and economic dimensions of CSR projects for their sustainable development. This paper presents an assessment of three CSR projects undertaken by the energy industry (renewable energy) and commercial sector (plastic waste recycling) in Thailand to transition towards the circular economy (CE) business model. A set of CE indicators were selected from the World Business Council for Sustainable Development: WBCSD 2018 European Commission 2018, and British Standard Institution 2017 and compared with the sustainability indicators listed in the ISO 26000:2010 (referenced in the Global Reporting Initiative (GRI): G4 Guidelines). These indicators were established to assess the readiness of companies to implement sustainable CSR projects. The assessment results showed that the CSR projects in the case study were conducive to the CE model, as most of the CE concepts evaluated by the performance indicators were already in place. This study aimed to support the implementation of CSR projects that contribute to adopting a CE business model and determine key performance indicators (KPIs) to measure and monitor CSR projects in terms of their CE concepts. The sustainability KPIs proposed in this study can serve as a set of guidelines to drive CE strategy adoption and allow for the identification of sustainable CSR projects that can simultaneously offer more value creation and satisfaction for all stakeholders, including society and the companies, while reducing environmental impacts. This paper integrates CSR into a CE approach that results in business sustainability and contributes to Sustainability Development Goal (SDG) targets. [Display omitted] • KPIs were adopted for the comprehensive assessment of CSR projects. • CSR projects of renewable energy and plastic waste were evaluated in their ability to CE concepts. • The KPIs can identify sustainable level and contribute to CE and SDG targets of businesses. [ABSTRACT FROM AUTHOR]

The circular economy (CE) framework has captured the attention of industry and academia and received strong policy support. It is currently deemed as a powerful solution for sustainability, despite ongoing criticism on its oversimplification and lack of consideration of socio-ethical issues. In parallel, the concept of RRI has emerged strongly with a strong focus on the integration of social desirability in innovation under transparency, democracy and mutual responsiveness principles. In this paper, we critically examine the literature on the CE and RRI in order to find out how the different focus of RRI may provide an innovation governance framework to strengthen the CE framework. There are two main ways in which RRI could further the CE: first, anticipating unexpected consequences, helping to break disciplinary barriers and acknowledging systemic limits that are not currently taken into consideration; and second, the integration of socio-ethical issues in the CE, and addressing the social implications of the CE through stakeholder participation. However, future research should look at remaining blind spots of CE and RRI, such as non-technological innovation, the demand-side of innovation and the development of business models. With that objective, we suggest a research agenda for common development of the frameworks. • Neglect of unintended consequences is a problem in current CE literature. • Lack of consideration of socio-ethical issues is a major criticism of the CE. • RRI provides a socio-ethically oriented innovation governance framework. • The RRI framework may help to address the shortcomings of the CE. • Further integrative research is needed. [ABSTRACT FROM AUTHOR]

End-of-life vehicles (ELV) represent a relevant waste source in Europe, even if ELV recycling is a priority of the European Union waste legislation and Environment Action Programmes (EAPs). End-of-Life Tires (ELTs) constitute a relevant portion of ELV waste. Textile fibre, which is a relevant portion of the ELT material, is considered as a special waste (European Waste Catalogue – EWC code 19.12.08). The main problem related to textile fibre is its contamination with rubber which does not allow to obtain a pure product economically and qualitatively useable. The aim of this paper is to illustrate an innovative technology for ELT fibre's recycling, which allows to transform textile fibre into a useful secondary raw material for different applications. In particular, the use of ELT fibre as additive for bituminous conglomerates has been investigated. The different processes have been analysed from an environmental point of view, applying the Life Cycle Assessment methodology. It came up there is an impact reduction in case the ELT fibre is reused as additive for bituminous conglomerates, instead of disposing it (through incineration). Moreover, the financial and economic sustainability of the related technological process has been evaluated to check whether the process is sustainable in the long term. Starting from the results of the Life Cycle Assessment, economic performance indicators have been calculated, by applying the European Commission methodology for cost-benefit analysis. According to the present cost-benefit analysis, in the medium and long term the system is financially viable, and the high economic profitability makes the process economically sustainable. Furthermore, a sensitivity analysis as well as a risk assessment have been carried out in order to identify critical variables, evaluate risks and define risk mitigation measures. According to the sensitivity analysis performed, the project is not highly risky since even in the worst scenario the possible loss is moderate. Based on the results of this analysis, it can be concluded that this ELT fibre's recycling system can be replicated across Europe, conveniently fostered by national policies (such as subsidies, value added tax etc.). • A crucial technological add-on to existing installations is illustrated. • The aim is to transform ELT textile fibre into a useful secondary raw material for different applications. • ELT fibre's reuse presents a reduced environmental impact in comparison to the fibre's incineration. • The high economic profitability makes this recycling system economically sustainable. [ABSTRACT FROM AUTHOR]

In recent years, the Circular Economy (CE) has gained attention as a strategy for achieving sustainable development through cleaner production and reducing waste and pollution. At the same time, digital technologies are recognized as crucial sustainability drivers by enabling efficiency, collaboration, and innovation. This research paper explores the factors that support Green Entrepreneurship (GE) and digitalization in the context of CE and Waste Management (WM) in Indian manufacturing "Micro, Small, and Medium Enterprises" (MSMEs). Further, the study prioritizes, establishes a contextual relationship, and clusters the GE factors that enable digitalization in the CE and WM of Indian manufacturing MSMEs. To meet research goals, the study uses a mixed-methods approach that includes a literature review, qualitative interviews with MSME managers, and theoretical support (stakeholder theory, resource-based view, dynamic capability theory, met expectation theory, and upper echelons theory) to find the enablers. Further, two-phase "Multi-Criteria Decision Making" (MCDM) tools are utilized. Initially, the quantitative "Best-Worst Method" (BWM) was used for ranking, and then "Total Interpretive Structural Modeling" (TISM) was used to establish a mutual relationship among the enablers. The strength of relationships among the enablers was established based on "dependence power" (DEP) and "driving power" (DRP). The findings through BWM analysis show that among the main category, technology-based enablers, and among sub-categories, top management and organizational coordination are the high-priority enablers/sub-enablers to optimize sustainable action. The findings also suggest that technology infrastructure for cleaner and sustainable manufacturing, knowledge of green entrepreneurs, training, the dynamic capacities of digitalization towards a CE, subsidies, and finance are driving enablers. The research contributes to understanding the enabling factors of GE and digitalization and their interdependencies for CE and sustainable development. [Display omitted] • Green Entrepreneurship and Digitalization drive Sustainable Waste Management and Circular Economy. • Top management and organizational coordination are crucial for sustainable action. • Infrastructure and knowledge drive digitalization in the Circular Economy. • Digitalization and green entrepreneurship complement the circular economy. [ABSTRACT FROM AUTHOR]

Rapid population growth and urbanisation have accelerated waste generation, and effective waste management has become a major challenge worldwide. With advances in technology and management methods, waste management strategies have begun embracing digitalisation, leveraging the Internet of Things (IoT), big data analytics, cloud/edge computing, machine learning, 5G communication, and blockchain technologies. Amongst them, the blockchain technology has the structural features of achieving information security and integrity without central guarantees. Blockchain also meets the data record/storage needs of waste management and the design of new mechanisms for effective waste management. These benefits make blockchain an attractive technology in the field of waste management, with researchers and practitioners alike investigating its broad applications to support sustainable waste management. However, this emerging technology has not yet been widely accepted by potential users. To further champion the application of blockchain technology, this review paper provides a systematic overview of the various pathways in which the technology has been applied in the waste management industry and further discusses its related challenges and opportunities via considering the promising prospect of combining blockchain technology with IoT, artificial intelligence (AI) and life cycle assessment (LCA). This review also provides insights for interpreting some emerging applications of blockchain in the field of waste management and clarifying the research paths in the context of blockchain, digitalised waste management, and circular economy. [Display omitted] • Impacts of blockchain technology on waste management have been substantial. • Recent development from blockchain's functional perspectives was surveyed. • There is a long way towards blockchain-based sustainable waste management. • Relevant challenges and opportunities in blockchain applications were discussed. • Outlooks in digitalised waste management and circular economy were clarified. [ABSTRACT FROM AUTHOR]

With the increasing conflicts among economic growth, environmental deterioration, and resource shortage, as an effective way to achieve the sustainable development and circular economy, the eco-industrial park gradually becomes a critical research issue in the field of recycling economy. In this paper, a hybrid framework for evaluating the comprehensive benefit of eco-industrial parks from the perspective of circular economy was proposed. Firstly, the evaluation index system for eco-industrial parks was constructed by employing the grey-Delphi method according to the opinions provided by experts from relevant fields, which includes economic benefit criteria, social benefit criteria, environmental benefit criteria, ecology industry construction criteria, and management level criteria, consisting of seventeen quantitative sub-criteria and nine qualitative sub-criteria. Secondly, in order to solve complicated, uncertain and ambiguous problems under the fuzzy background, a hybrid multi-criteria decision making (MCDM) approach was put forward on the basis of superiority linguistic ratings and entropy weight method for weight determination as well as fuzzy-VIKOR for ranking alternatives. Finally, the effectiveness and practicality of the proposed hybrid MCDM approach was demonstrated through a case analysis of six representative eco-industrial parks in China, and the comprehensive benefits of six eco-industrial parks were prioritized effectively. The hybrid MCDM approach in this paper presents a great potential in evaluating and ranking the comprehensive benefits of eco-industrial parks through solving complex and ambiguous problems in a fuzzy environment and varying MCDM tools. The evaluation findings by employing the proposed MCDM approach can provide references for the construction and management of eco-industrial parks and relevant policy formulation. [ABSTRACT FROM AUTHOR]

In recent years, sustainability concerns gained traction in the scientific literature on cleaner production, as well as in industry and application. In this regard, the circular economy (CE) is intended to contribute to the current ecological transition, providing economic advantages and preserving global society for future generations. CE initiatives have been implemented in recent decades to offset the harmful environmental consequences of supply chain operations. Notably, CE strategies can be applied at different supply chain levels, in product design, manufacturing, transportation, consumption, and disposal. Using the Life Cycle Assessment (LCA) methodology, the present research examines a case study from the Italian egg industry, highlighting the environmental benefits and social implications of initiatives supporting CE (i.e. the use of recyclable and biodegradable packaging and the adoption of a short supply chain). The implementation of those CE strategies shows a 22% reduction in Kg CO 2 -eq emissions, proposing that circular concepts should be incorporated into sustainable supply chain management. Notably, this paper analyses the environmental implications of the intermediate phases of the egg industry supply chain. Both primary and secondary data have been collected. We collected primary data via direct interviews with companies' managers throughout all the study phases. As a result, despite various external issues affecting the company decisions, the paper shows that incorporating CE strategies may deliver demonstrable environmental benefits for the companies. In addition, other strategies that should be adopted in the long term have also been outlined. Finally, the implications that sustainable behaviours of the companies can entail have been examined. [ABSTRACT FROM AUTHOR]

Circular economy is a sustainable economic development model. It replaces the traditional economic development model that relies heavily on resource consumption and waste generation. Circular economy is particularly important to the waste electrical and electronic equipment industry as e-waste contains toxic substances and precious metals. While previous review studies focused on specific aspects of the WEEE industry (e.g., "4R" circular economy strategies), these studies offer little details on how circular economy practices affect the development of the environment and economy in the waste electrical and electronic equipment industry. This study examines "10R" circular economy strategies to advance knowledge of the existing literature that focuses on "4R" circular economy strategies. To improve the methodology used in the previous review studies that apply subjective methods (e.g., content analysis), this paper conducts a systematic literature review on 208 studies and uses citation network analysis to examine specific circular economy practices in the waste electrical and electronic equipment industry. The citation network analysis identified five major research domains (i.e., "e-waste management systems and practices", "e-waste legislation and its components", "extended producer responsibility schemes", "recycling critical materials from e-waste", "circular economy strategies for the waste electrical and electronic equipment industry"). Based on these results, this study conducts a main path analysis to reveal ten major topics (i.e., e-waste recycling system; exploring untapped e-waste; compliance assurance of stakeholders; e-waste reverse logistics; reward and punishment mechanisms in extended producer responsibility system; verifying the rationality of product classification; recycling critical materials from urban mines; setting a specific target for preparation for reuse; "10R" strategies applied in the smart factory; consumer attitude toward remanufactured/refurbished/repurposed strategies and the resultant products) in the identified research domain. Finally, this paper proposes future research directions and provides managerial and policy implications for researchers and practitioners. • "10R" strategies for the waste electrical and electronic equipment industry. • Effect of circular economy practices on environmental and economic performance. • Related publications evolution characteristics in 2003–2020. • Five key research domains of circular economy practices and their major topics. • Research directions for future studies. [ABSTRACT FROM AUTHOR]

Abstract Combining sustainable consumption with the circular economy concept could help tackle challenges, such as resource scarcity and climate change by reducing resource throughput and increasing cycling of products and materials within the economic system, thereby reducing emissions and virgin material use. To achieve sustainable consumption in a circular economy production and consumption practices need to change. Business models can potentially influence both practices as it defines how a company conducts business and shapes the company-consumer relationship. This paper developed future business models for sustainable consumption through two rounds of semi-structured interviews with experts from academia, industry, and policy. During the first interview round, four business model elements that are important for sustainable consumption were identified: Resource strategy, Revenue model, Consumer effort, and Objective to (decrease/increase) consumption level. Based on these elements, we developed a comprehensive business model framework. Using this framework, experts envisioned future business models for sustainable consumption of clothing during the second interview round. The findings of this study suggest that the most promising business models for sustainable consumption are those that reduce overall consumption levels and consumer effort. Further, we found that a diverse range of business models in the market can potentially enable different customer segments to consume sustainably. [ABSTRACT FROM AUTHOR]

Abstract European countries are attempting to promote sustainable development by transitioning from a linear to a circular economy, where waste is to be prevented and recycling activities are promoted. This paper studies the implementation of Extended Producer Responsibility (EPR) policies for the packaging waste in two later European adopter countries of waste management policies: Portugal and Spain. The main goal is to evaluate whether EPR policies in both countries have achieved their basic two goals: 1) reduction of waste, and 2) increase recycling activities. Two case-studies were built based on interviews made to main waste management stakeholders. The analysis shows that the implementation of the EPR policies have had a positive impact throughout the years in both countries. Regarding the waste reduction goal, the systems have still not been completely able to detach packaging waste production from economic growth, but they have been able to promote material usage reduction directly through the Green dot fee model adopted. Regarding the increasing of recycling activities, both countries have been able to increase such rates throughout the years, in the direction of the EU targets. Highlights • EPR policies implemented in Spain and Portugal are evaluated. • EPR policies have contributed to packaging waste reduction and increase recycling activities. • EPR policies are having a positive impact throughout the years in both countries. • Some challenges still need to be faced: eco-design promotion and packaging life-cycle. [ABSTRACT FROM AUTHOR]

Abstract Improving the eco-efficiency of the circular economy system in mining areas has been recognized as the most effective way to reduce the greenhouse effect and achieve sustainable development. Based on the emergy theory and on data envelopment analysis (DEA), this paper adopts the SBM-Undesirable model to evaluate the eco-efficiency of the circular economy system in China's largest coal mining area, Shanxi Province, during the period 2006–2015. Emergy flow indices are treated as input and output indices. Eco-efficiency is factorized into economic efficiency and environmental efficiency. The potential for improvement of the circular economy system is analyzed based on input redundancy and output deficiency. The results for the period 2006–2015 indicate the following: (1) both the input and the output of the circular system increase during this period; (2) the increased input relies on mostly imported emergy, and the increase in waste emergy is lower than the exported emergy; (3) eco-efficiency is invalid except for 2011 and 2012 and exhibits a decreasing trend beginning in 2013; (4) environmental efficiency is invalid over the entire period, and the eco-efficiency level is positively related to the economic efficiency score; and (5) the circular economy system has a larger energy saving space, and the key to achieving sustainability of the circular economy system is output growth. Highlights • We assess the circular economy system eco-efficiency of coal mining in China using emergy and DEA. • We decompose eco-efficiency as economic efficiency and environmental efficiency. • The circular economy system is an energy-intensive system with high input and output. • The eco-efficiency level is positively related to economic efficiency. • The circular economy system has huge potential to save energy and reduce emissions. [ABSTRACT FROM AUTHOR]

The paper addresses a poorly documented issue in the literature, namely the role of clusters in green transformation, including processes related to green, low-carbon, and circular economies. The purpose was to identify and understand the practices of clusters in this area. The adopted mixed research strategy consisted of both qualitative and quantitative research. Both research phases were conducted in a group of Polish Key National Clusters. Through qualitative research, the authors abductively identified practices that are vital for green transformation and categorized them into three thematic areas: Integration, Access to resources, and Education and awareness building. On this basis, the authors developed a method to measure the clusters' level of advancement in green practices, which was used in quantitative research. The results show that the surveyed clusters undertake a number of practices to promote green transformation. They are active in each of the distinguished areas and also engage in its most demanding forms. The study sheds new light on the concept of the clusters, showing how such organizations can be used as agents of change in favor of green transformation. • Research on clusters in relation to green transformation is at a very early stage. • Clusters can pursue various practices to promote green transformation. • Cluster green practices can be grouped as: Integration, Resources, and Education. • Advancement of Polish National Key Clusters in green transformation is rather high. [ABSTRACT FROM AUTHOR]

Contemporary concepts of economic development in the European Union (EU) progressively focus on environmental protection. At the stage of their implementation by the EU countries, some of the policies include sustainable development, green growth, green economy, and circular economy. The leading concept in this regard is the European Green Deal. It should be noted, that a multitude of means exists within EU countries, by which plastic waste is managed, with a significant share of countries largely landfilling it or placing it in waste storage facilities. The aim of this paper is to introduce a proposal meant to propel the prospects related to managing plastic waste through chemical recycling. This recommendation would contribute to the fulfillment of the circular economy model implemented by EU countries. By means of chemical recycling, it is possible to transform plastic waste into a full-value market product which can be used, for example, in the fuel industry, constituting an alternative to the agricultural products used (biocomponents). Thereby, it may result in the production of, for example, engine fuel components that can replace plant-based components or other added-value chemicals. The findings demonstrated on four levels: environmental, technical, economic, and managerial, confirm the technological possibilities of chemical recycling of plastics and the legitimacy of the implementation of the presented concept. [ABSTRACT FROM AUTHOR]

The transition to a circular economy is often presented as a straightforward, neutral and apolitical process, characterised by an implicit techno-optimistic and eco-modernist stance. However, in their recent paper on 'circular futures', Bauwens et al. (2020) illustrate that the circular economy is best understood as an umbrella term that might come to define very contrasting visions of sustainable development. Despite this, there continues to be a lack of discussion about the basic assumptions regarding social and economic structures on which the circular economy should be based, with research predominantly focusing on technical and practical questions. Therefore, in this conceptual paper, we assess the a priori compatibility of different plausible configurations of the circular economy with the principal theories of value found in mainstream and heterodox economics. We argue that these futures are themselves value articulating institutions that implicitly adhere to a theory of value even if this is not recognised. Moreover, given that theories of value go to the heart of how economies and societies function and reproduce themselves, we argue that circular economy research should recognise the importance of value and acknowledge how value theory might enable or contradict the visions of sustainable development articulated. • Circular economy literature lacks grounding in economic theory. • The compatibility of different circular futures and theories of value is examined. • Futures are value articulating institutions implicitly adhering to a theory of value. • Theories of value can help articulate more ambitious CE visions. [ABSTRACT FROM AUTHOR]

The Circular Economy is increasingly seen as a possible solution to address sustainable development. An economic system that minimises resource input into and waste, emission, and energy leakage out of the system is hoped to mitigate negative impacts without jeopardising growth and prosperity. This paper discusses the sustainability performance of the circular business models (CBM) and circular supply chains necessary to implement the concept on an organisational level and proposes a framework to integrate circular business models and circular supply chain management towards sustainable development. It was developed based on literature analysis and four case studies. The proposed framework shows how different circular business models are driving circular supply chain in different loops: closing loops, slowing loops, intensifying loops, narrowing loops, and dematerialising loops. The identified circular business models vary in complexity of the circular supply chain and in the value proposition. Our research indicates circular business and circular supply chain help in realising sustainability ambitions. [ABSTRACT FROM AUTHOR]

This paper examines the role of small entrepreneurial companies and their partnerships with large corporations to advance the circular economy (CE). The authors provide insights from a U.S.-based empirical study that involved 12 companies and examined the emerging drivers, current challenges and future opportunities for advancing waste repurposing and product reuse. Many large companies fail to incorporate CE principles into their business strategy due to lack of mandates, costs, logistical hurdles and inertia. This presents an opportunity for entrepreneurial companies with innovative business models to fill the gap and provide critical links for corporations in reverse supply chains while creating new business opportunities with social benefits. The study found that despite the lack of federal regulations in the U.S. a growing number of corporations are partnering with entrepreneurs to reduce waste and advance product reuse. Key drivers for such trends include sustainability commitments and zero waste goals by companies and municipalities, European Union and U.S. state mandates, reputation and the growing focus on local sourcing. Technology, knowledge, and strategic partnerships between entrepreneurs and corporations play a critical role in reducing financial costs, time, energy, environmental impacts and resources, thus helping establish viable business models. The authors propose a new framework for corporate-entrepreneur collaborations to advance a CE. The study contributes to the research on the relationship between entrepreneurial innovation and the development of CE principles within corporate supply chains, a field that is still in its infant stage. [ABSTRACT FROM AUTHOR]

The need for circularity assessment tools to prevent undesirable effects (e.g. recycling processes requiring more energy) is gaining recognition. Preserving resources and relieving pollution reservoirs are both necessary conditions to achieve a sustainable circular economy (CE), and the corresponding assessment tools should be selected accordingly. We chose life cycle assessment (LCA) and the Material Circularity Indicator (MCI). In this paper, we tested the tools through two case studies from the tire industry. The Brazilian case proposes three scenarios to process used tires: baseline, retreading and regrooving. The European case suggests collecting secondary material from end-of-life (EoL) tires to produce recycled content (RC) at 4% and 10% rates. These rates were chosen to illustrate the change in tire performance in the use phase. We propose an approach to discuss MCI and LCA results that identifies four pathways toward or away from the CE goal: coupling, decoupling, trade-off on resources or trade-off on reservoirs. The case studies reveal that extending lifetime through retreading and introducing recycled material improves the MCI of a tire but do not necessarily improve impacts on human health and ecosystems. Also, discrepancies in the results between the MCI and the LCA's resource indicator highlight relevant issues for new CE experts seeking to design assessment tools. Even though LCA provides a broader scope than the MCI, it still reflects a relative contribution to environmental sustainability while the MCI focuses on micro-scale improvements in resource use efficiency. [ABSTRACT FROM AUTHOR]

The growing importance of the concept of the circular economy as a way to attain sustainable development has encouraged scholars to propose different ways to understand it. Given the large number of studies done on the circular economy, their differing approaches and their multiple applications, this paper attempts to propose a consensus view of the basic notions of the circular economy framework and highlight its relationship with eco-innovation. To that end, this study carried out a systematic literature review that resulted in four main outputs: a knowledge map of the circular economy, an analysis of the main notions of the concept, principles, and determinants of a circular economy. Finally, this study brings to light some remarkable examples of eco-innovations developed for implementation in the circular economy. [ABSTRACT FROM AUTHOR]

The Circular Economy (CE) has received considerable attention as an approach that promises to reconcile ecological systems and economic growth. In spite of its increased popularity, little is known about the implementation struggles of incumbent firms across industrial sectors. Furthermore, although the notion of circular production systems is at the intersection of different research areas such as sustainable product design, sustainable supply chains, and reverse logistics, knowledge on how these concepts combine to ease or impede firms' transition towards circularity is scarce. To shed light on these gaps, I used multiple case studies from Cradle to Cradle certified companies in the textile industry in Europe. By employing qualitative research, I identified a set of factors along the textile value chain, from product design to take-back and reprocessing, that are crucial in expediting or delaying a firm's aspirations to develop a circular product. The main contribution of this paper is the dynamic understanding of how certain collaborative supplier-buyer innovation factors (i.e., supply chain position, power balance, and a shared vision) coupled with complex aspects in product design, namely in basic materials, architecture, and functionality, combine to determine the output speed and quantity of circular products to be sold, taken back, and ultimately regenerated. [ABSTRACT FROM AUTHOR]

Implementing practices for a circular economy transforms the way companies do business, notably in the manufacturing industry. However, a circular economy requires a transformation of both production and consumption systems; the standard approach for creation, fabrication, and commerce of products is challenged. Authors repeatedly call for the development of new proficiencies to attend to system transformations, but these so far have not been described for design and engineering. Given that the design of a product directly influences the way a value chain will be managed, building circular, globally sustainable value chains inevitably signifies a fundamental change in the practice of design. Comprehensive analyses were conducted on case studies from a variety of multinational enterprises that are transforming their product strategies for climate change. Changes in design processes were identified, revealing a growing necessity for industry to employ new proficiencies that support closure of material loops. This paper contributes to existing literature by depicting successful practices being implemented in industry. A variety of new capabilities are key to design for a sustainable future; these range from deeper knowledge of material composition to rich understanding of social behaviour. Resulting from this research, learning goals are proposed to serve as guidance for manufacturing companies seeking to tackle climate change. Conclusions aim to encourage researchers and academics to respond to emerging needs by re-thinking education in design and engineering. [ABSTRACT FROM AUTHOR]

Soil amendment is a viable alternative to chemical fumigants thanks its benefits on soil quality, microbial biodiversity, and plant health being valorized underused biomass. Nonetheless, the concepts of durability and stability for disease suppressive soils are became a critical issue in the advanced organic cropping systems. Although a comprehensive and critical literature is available, this paper briefly analyzes the governance of the soil organic amendments as an external source of organic matter and beneficial microbiota in view of new opportunities and technological advancements. Particularly, it discusses some possible solutions for developing the suppressive properties of the amended-soils by helping grower to well understand the complex processes/interactions that lead to soil suppressiveness from the most practical viewpoints according to the principles of green economy. [ABSTRACT FROM AUTHOR]

This research paper shows how a firm pursues innovation activities for economic, social and environmental value creation in the context of time sensitivity. We make a conceptual link between lean startup thinking, triple bottom line value creation, and organizational capabilities. The case study firm uses a novel experimentation approach to pursue the goal of diverting all of its sold clothing from landfill through a two-year project. This requires substantial changes to the current business practice because in 2012, the clothing retailer recovered 1% of all garments sold. The fibre input value for all garments sold in 2012 exceeded $7m. We found that despite a stated need for fast learning through project experiments, the experiments were not executed quickly. (1) The desire to plan project activities and the lack of lean startup approach expertise across the whole project team hampered fast action. This led to the extension of the project timeline. However, project team confidence about learning by doing increased through privately executed experiments. (2) Some project experiments were not fit to meet the triple bottom value creation project goal and were dropped from the project. Overall, the corporate mindset of economic value creation still dominated. [ABSTRACT FROM AUTHOR]

This VSI focuses on what cross-cutting insights might be gained from research to increase the energy/materials circularity and the contribution of eco-innovation, cleaner consumption, and waste management to produce a logical body of knowledge that may lead to increased resilience and a sustainable Planet. The articles' collection shows development trends of sustainable, cleaner production under the Special Issue: A Resilient and Sustainable World. Some selected d papers have been presented and emerged from the 10th and 11th International Workshop on Advances in Cleaner Production (IWACP), held in hybrid mode in Italy (Ferrata and Florence). The contribution of the articles in this Special Issue could be divided into efforts toward sustainable and cleaner production, aiming (i) Eco-innovation for cleaner production and circular economy, (ii) Proper monitoring and identification of cleaner production, circular economy, and eco-innovation, (iii) cleaner production, circular economy and eco-innovation targeting social wellbeing and cleaner environment, (iv) cleaner production, circular economy and eco-innovation targeting emission reduction, and (v) cleaner production, circular economy and eco-innovation targeting improved and optimized production processes. [ABSTRACT FROM AUTHOR]

Moving towards a circular economy (CE) has become one of the main strategic initiatives on a global scale in the search for sustainable economic systems. However, the conceptual relationship between sustainable development and the circular economy is a matter of ongoing debate. In particular, the extent to which CE initiatives are contributing to the mitigation of resource extraction seems to be a still unclear topic. This paper investigates the relationship between the extraction of natural resources and the CE, and also analyses the effects of critical socioeconomic drivers such as economic and population growth and economic structures. The analysis is based on a panel data covering 28 European countries during the period 2010–2019. Results confirm that promoting a shift towards more circular economic systems can reduce the extraction of primary resources. However, the mitigating effect of CE initiatives remains rather marginal when compared to the impact of economic growth. Namely, estimates show that the primary resources extracted annually linked to economic growth are roughly four times the resources saved by CE initiatives. The findings provide evidence that the circularity of economic systems should be approached from a systemic perspective that includes both production and consumption as well as waste management. In particular, complementary measures addressing behavioural consumption are needed if we want to achieve a sustainable development. • GDP growth increases resource extraction 4 times more than the savings achieved by CE initiatives. • A 1% increase in GDP can increase resource extraction between 0,3 and 0,6%. • Promoting circular material use and circular economy activities contribute to reduce raw material extraction. • More effective policy interventions should be sought targeting behavioural consumption [ABSTRACT FROM AUTHOR]

Calls for a transformation towards more sustainable consumption and production (SCP) have been intensifying. As urban populations swell across the planet, cities are faced with increasing pressure on infrastructure, economic and ecological systems. Yet, with their high population densities and ubiquity of information and communication technologies, cities are becoming breeding grounds for a new, circular economy driven by emerging and long-standing sharing activities. This research provides a comprehensive view of SCP systems in cities by integrating and examining sharing economy activities in the context of two continuums, i.e. SCP and private/public orientation. Based on these two analytical dimensions, the paper evaluates and plots five groups of 18 sharing activities to create a Sharing Cities-SCP Typology comprised by five ideal types. Each of these five types represents a unique form of SCP activity, with the potential to directly impact SCP systems in the context of urban environments. By enabling diversity and hybridity in the SCP analysis, we allow for a theoretical expansion of SCP models and a new way of understanding how they may play out in cities. [ABSTRACT FROM AUTHOR]

We need a proper mechanism to manage issues related to our environment, economy, and society to proceed toward sustainability. Many researchers have worked for sustainable development goals using artificial intelligence (AI) and machine learning to develop an efficient mechanism to facilitate a circular economy and link up the needs of the present generation without disconcerting the capability of coming generations. This study offers a comprehensive review of AI and sustainability and suggested future research scope. The review has focused on different use cases in industries like construction, transportation, healthcare, manufacturing, agriculture, and water. The systematic review is based on 287 papers selected out of 8341 search results with an application of PRISMA based method. Out of all the techniques used in sustainability regression, RL and DSS-based AI models are more popular than others. The review also provides directions surrounding which industrial sectors are using which methods for incorporating sustainable development practices in their organization. • We analyzed the impact of Artificial Intelligence on Sustainability. • A PRISMA based method is used for undertaking this literature review. • Areas covered in this study are environmental causes, technical challenges, and social issues. • Various AI algorithms used till now for achieving sustainability has been presented. • We present future research directions for use of AI for sustainable development. [ABSTRACT FROM AUTHOR]

Post-occupancy evaluation (POE) enables designers and contractors to determine whether a building's performance 'in-use' meets the specifications prescribed 'in-design'. Hence, POE presents an invaluable opportunity for stakeholders within the architecture, engineering, construction and operations (AECO) sector to learn from mistakes and improve the environmental performance of future designs. Against this contextual backdrop, this paper identifies the barriers to performing a POE implementation following a building's hand-over and use, and how these barriers inadvertently prevent sustainable development goals from being reached. A theoretical model is developed which enables building owners and users to implement a POE and thereby realise its innate potential to reduce the impact of the built environment upon the natural environment. An interpretivist philosophical stance is adopted to analyse both secondary and primary data collated using a three-stage waterfall process. First, a thematic content analysis is conducted utilising the transcript of a practitioner focus group convened to garner perspectives on the prominent barriers to POE implementation. Second, a scientometric analysis is undertaken to examine the prevailing body of knowledge (BoK) pertaining to sustainability, circular economy and barriers to POE implementation. Finally, a cross-comparative analysis of the emergent findings emanating from the previous two stages is conducted to ascertain whether academic literature is addressing the barriers identified by industry practitioners. The research reveals that despite the significant opportunities that POE presents to reduce the built environment's substantial impact upon the natural environment, only a relatively small proportion of the POE BoK explores this objective. Similarly, an even smaller proportion of literature examines the barriers to POE implementation and how to overcome them. The cross-comparative analysis undertaken highlights inconsistencies between practitioner requirements regarding implementation barriers and the proportion of the POE BoK pursuing this objective. Curiously, there is no literature delineating POE's potential to facilitate a circular economy within the built environment sector. A novel theoretical model emerges from this research which acts to bridge a gap between theory and practice and provides utility for researchers and practitioners alike to increase the interchange of knowledge pertaining to pertinent POE requirements. The resultant model establishes POE as a crucial environmental feedback mechanism for stakeholders within the AECO sector. [ABSTRACT FROM AUTHOR]

Abstract: It is widely acknowledged that China’s economic miracle has been achieved at the expense of its natural capital and environment. In order to deal with this problem, the circular economy (CE) has been chosen as a national policy for sustainable development. National laws and regulations have been enacted to facilitate the implementation of CE and national CE demonstration projects have been initiated such that national benchmarking activities could be completed. China is the first country to release nationally focused CE indicators so that objective and credible information on the status of CE implementation can be recognized. These CE indicators are valuable metrics for policy and decision-makers and can help achieve CE goals and outcomes. This unique indicator system has not been communicated to international communities. This paper aims to more broadly introduce this unique national CE indicator system. China’s CE efforts are first detailed with various provisions of the national indicator system. A critical analysis of such an indicator system is presented. We show that certain benefits can be gained, but substantive revision is also needed due to the lack of a comprehensive set of sustainability indicators which should include social, business indicators, urban/industrial symbiosis, absolute material/energy reduction, and prevention-oriented indicators. Concerns related to barriers on implementation are also presented in this paper. The knowledge gained from Chinese efforts on CE indicators are valuable to both developed and developing nations seeking to implement sustainable development measures within their regulatory policies. [Copyright &y& Elsevier]

Industry 4.0 has been identified as a major contributor to the era of digitalisation. Its implications for sustainable development have gained widespread attention from the perspectives of the triple bottom line, sustainable business models and circular economy. The purpose of this paper is to map the broad field of sustainable development and investigate the key research areas which comprises the aforementioned perspectives under Industry 4.0 framework. A systematic mapping review was conducted by searching five databases for relevant literature published between January 1, 2012 and April 17, 2020. The search yielded 4291 papers of which 81 were identified as primary papers relevant to the research herein. The primary findings are that the majority of sustainability research focuses on conceptual analysis, and the Internet of Things is dominantly cited with an emphasis on achieving the triple bottom line benefits. Sustainable development in the Industry 4.0 context contributes to circular economic objectives by achieving social, economic, and environmental benefits. Triple bottom line studies mainly focus on Industry 4.0 adoption and implementation, sustainable supply chains, smart and sustainable cities, and smart factories. Circular economy and sustainable business models as emerging research themes that focus on Industry 4.0 adoption and implementation, as well as sustainable supply chains. Our analysis consolidates emerging research patterns areas in both the Industry 4.0 and sustainability literature. Furthermore, it identifies salient research gaps and suggests future research. • Industry 4.0 evolution demands systemic ways for sustainable development. • Triple Bottom Line, Circular Economy and Sustainable Business Model perspectives. • A mapping study that covers Scopus, Web of Science, IEEE Explore and ProQuest. • Salient and emerging research areas are identified. • Future research gaps are presented. [ABSTRACT FROM AUTHOR]

China's Green Building (GB) evaluation standard has always emphasized the use of Recycled Building Materials (RBM). However, the quality of RBM is a major obstacle to its promotion. Unlike previous studies, this study innovatively developed a four-way evolutionary game model including Local Government (LG), RBM suppliers, developers and homebuyers, and examined their strategy changes from the production of building materials to the purchase and use of homes. This paper uses MATLAB 2021b software to simulate and verify the model and uses the real market data of Wuhan city and Sanya city to analyze the influence of some key factors among 23 factors such as the price of purchasing natural building materials P 2 and the basic utility obtained by purchasing a house B. The results showed the following: (1) Among the four evolutionary stable strategies in this system, the optimal strategy combination lies when LG does not plan, manufacturers perform upcycling and when developers and homebuyers choose RBM. (2) High fines can force suppliers to perform upcycling, and developers will build houses according to homebuyers' preferences. If homebuyers are in immediate demand for homes, they will more willing to purchase homes built with RBM. (3) Considering the financial pressure of LG, it should promote the system in parallel with rewards and penalties in the early stage of development, while after a period of time, LG can stop making any subsidies and only retain the regulation of suppliers. This study helps to better understand the behaviors of various stakeholders in the full life cycle of RBM, and provides some reference for the development of RBM and GB in China. [ABSTRACT FROM AUTHOR]

Anaerobic digestion of bioplastics' wastes may represent a valuable disposal strategy for these important substitutes for plastics, in order to reduce their leakage into the environment and to produce bioenergy in the form of biomethane, contributing positively to the sustainability of the entire bioplastics' life chain. Only lab-scale data about bioplastics' anaerobic degradability and biomethane production have been produced until now, using approaches far from full-scale conditions. This paper presents a novel approach in studying the potential of bioplastics to produce biomethane because a pioneering methodology was adopted, allowing acquisition of full-scale data that can be useful to further attest environmental and economic sustainability in recovering bioplastics' wastes. A simple and replicable experimental approach was proposed to studying bioplastic degradability during anaerobic digestion, which consisted of placing the bioplastics into a full-scale digester within perforated steel boxes. Three different bioplastics items (one starch-based and two polylactic-acid based) were co-digested with organic wastes in a real anaerobic digestion plant using the real process parameters (thermophilic temperature for 30 days of hydraulic retention time followed by 30 days of mesophilic maturation). The experiments were replicated at laboratory-scale to evaluate the potential for biomethane recovery from bioplastics degradation. Laboratory-scale data did not differ from the data coming from the full-scale experiment, i.e., bioplastic degradation was not affected by the reactor volume. Bioplastics showed an average degradation of 27 ± 5% on a weight basis and a different degradation mechanism for the two types studied was found through Fourier Transform-InfraRed spectroscopy (FTIR) analysis. Starch-based bioplastics showed a quick consumption of the starch component, followed by a slow degradation of the polyester fraction. Polylactic acid bioplastics were degraded without chemical changes to their composition. In both laboratory-scale and full-scale experiments, temperature was a key parameter affecting bioplastics' degradation, i.e., thermophilic temperatures were needed to obtain a significant degradation. Biomethane potential determination of the bioplastics (135 ± 23 NLCH 4 kg Volatile Solids−1 as average at the end of the thermophilic digestion) proved that anaerobic digestion of bioplastics may be a sustainable approach, reducing bioplastic leakage and producing bioenergy (biogas), respecting Circular Economy principles. Anaerobic digestion may represent a valorisation treatment for bioplastics' wastes contributing positively to the sustainability of the entire bioplastics' life chain. [Display omitted] • First assessment of bioplastics' anaerobic degradation using a full-scale approach. • Starch-based and polylactic acid-based bioplastics degrade differently during AD. • Bioplastics' anaerobic degradation may enhance biomethane production from AD plant. • AD of bioplastics can avoid their leakage into natural environments. [ABSTRACT FROM AUTHOR]

The last decade has seen a new wave of ambitious policies in order to address the mounting ecological damage caused by high levels of consumerism and the depletion of resources to manufacture short life-cycle products. In this paper ‘Zero Waste’ and ‘Sustainable Materials Management’ are examined as prominent labels of an evolving waste policy discourse towards waste prevention and reduction and material cycles. Using discourse analysis key documents are comparatively assessed, presenting the origins of these two concepts and how they entered the waste policy domain. The different framing tactics and governance models are then presented. The findings demonstrate that the different discourse paradigms around the concept of ‘waste’ and ‘materials’, influences what policy initiatives, measurement tools and outcomes are pursued. Although Zero Waste and Sustainable Materials Management are gaining popularity as indicators of shifting waste policy towards Sustainable Production and Consumption Policy, particularly with increasing discussion and application of Circular Economy governance models in Europe and China, a distinction still exists between the conceptualisation and implementation within and across the two concepts. It is in this transition towards a Circular Economy that it is valuable to review the role of policy labels, keywords and framing context in waste policy and the ability of enhanced waste management to assist in the development of more sustainable and environmentally acceptable economic and social behaviour models. [ABSTRACT FROM AUTHOR]

The regional level has been recognized as a good scale for implementing actions towards sustainable development (SD). An important pathway to improve regional sustainability is to locally carry out long-term ecological planning. In order to reduce environmental impacts from fast economic growth, several eastern provinces of China began Ecological Province Construction (EPC) at the end of 1990s. This paper presented a case for analyzing the progress of EPC in China via both qualitative and quantitative methods. We studied Shandong Eco-province Construction (SEPC) and evaluated its outcomes with its pre-set indicators in 2003–2010. A further evaluation with eco-efficiency and de-linking indices was conducted. The results indicated the pre-set indicators could not effectively reflect of the ecological province construction. It was recommended to introduce an evaluated framework combined with eco-efficiency and de-linking indices to indicate ecological planning at the regional scale. [ABSTRACT FROM AUTHOR]