Search

Building hygrothermal performance, indoor air quality and energy consumption depend heavily on envelope airtightness. Over the last three decades, single-family dwellings have been amply studied in this respect by researchers in North Europe, the United States and Canada. However, very few studies have been conducted on airtightness in multi-family housing in warm climates such as Mediterranean Europe. This paper aims to enhance the understanding of building airtightness in early twenty-first-century multi-family buildings in southern Spain. Blower Door tests were conducted in 45 units in seven such buildings. The main airtightness parameter values found are reported and compared to the data for other buildings in southern Europe. The paper includes a statistical analysis of the findings, characterises building types and describes the protocol used to identify and quantify air leakage pathways. The conclusion drawn is that although a rough predictive model can be developed, the results are widely scattered due to the impact of the random component of manual construction, even in buildings with identical construction characteristics and types. The values recorded are nonetheless consistent with the findings for other European surveys. [ABSTRACT FROM AUTHOR]

In this paper, a case study of performing a reliable statistical procedure to evaluate the quality of HVAC systems in buildings using data retrieved from an ad hoc big data web energy platform is presented. The proposed methodology based on statistical quality control (SQC) is used to analyze the real state of thermal comfort and energy efficiency of the offices of the company FRIDAMA (Spain) in a reliable way. Non-conformities or alarms, and the actual assignable causes of these out of control states are detected. The capability to meet specification requirements is also analyzed. Tools and packages implemented in the open-source R software are employed to apply the different procedures. First, this study proposes to fit ARIMA time series models to CTQ variables. Then, the application of Shewhart and EWMA control charts to the time series residuals is proposed to control and monitor thermal comfort and energy consumption in buildings. Once thermal comfort and consumption variability are estimated, the implementation of capability indexes for autocorrelated variables is proposed to calculate the degree to which standards specifications are met. According with case study results, the proposed methodology has detected real anomalies in HVAC installation, helping to detect assignable causes and to make appropriate decisions. One of the goals is to perform and describe step by step this statistical procedure in order to be replicated by practitioners in a better way. [ABSTRACT FROM AUTHOR]

The Spanish residential building stock built between 1940 and 1980 period presents a high energy saving potential as it represents a significant percentage of the total housing stock and it was built without any regulation regarding energy efficiency. Accordingly, the first aim of this paper was to quantify the energy saving potential and the related reduction in CO 2 emissions of the housing stock in those years. The work focuses on the Mediterranean climate of the Comunitat Valenciana Region, therefore the energy efficiency strategies proposed are passive and deal with the envelope of buildings. On the basis of the results obtained, several scenarios with intervention periods of 10, 20 and 30 years were calculated. The conclusion was that with the current rate of annual building renovation, it will be nearly impossible to reach the goals established by the EPBD. Only a deep transformation of the building fabric within this sector could help in achieving them. Finally, it should be noted that the proposed methodology can be applied to other areas with different climates, particularly in Spain. [ABSTRACT FROM AUTHOR]

The paper shows the results of measurements of carbon dioxide concentrations conducted in the school buildings located in two different climates: Białystok (Poland) and Belmez/Córdoba (Spain). CO 2 concentration in first 45 min met requirements of regulations, but with medium occupation of places in classrooms, then the recommended values were excided. We developed a model for CO 2 level estimation. This model allowed us to simulated the CO 2 concentration for full occupation of classrooms in both countries. In these cases CO 2 concentration would exceed maximum value (1000 ppm) during the first hour. Furthermore required air change rates were calculated: for actual occupation they should be in a range 2.5–5 h −1 to maintain IDA2 and carbon dioxide concentration below 1000 ppm, while in case of full occupation even 6–9 h −1 . Finally, surveys of student satisfaction were performed in situ during the measurements of CO 2 level to obtain the dependence of student comfort perception on this concentration. [ABSTRACT FROM AUTHOR]

The total energy demand of data centres has experienced an important increase in the last years. This is why data centres industry and researchers are working on implementing energy efficiency measures in data centre portfolio. The cooling system of these unique infrastructures can account for 40% of the total energy consumption. Therefore, air management plays an important role to reduce operating costs and to increase overall cooling system efficiency. In order to improve and optimize the energy consumption and thermal management in data centres, appropriate metrics are imperative to evaluate their efficiency and performance. The present paper examines the air management of a real data centre by the use of the most promising air metrics. Noticeable air recirculation and hot spots were observed in the facility. Dynamic modelling was used to evaluate the benefit of air inefficiency mitigation. The combination of air management improvement with increasing the supply air temperature and reducing the air flow rate would allow important energy reduction in the cooling system. [ABSTRACT FROM AUTHOR]

Energy performance certificate databases are a key tool for mapping national building stock and thus fostering greater overall energy efficiency. This paper presents an insight into the energy performance of residential and tertiary sector buildings in Spain, through an analysis of the first 129,635 energy performance certificates issued for existing buildings, collected by the Catalan Institute of Energy. Most of the residential buildings or building units that were studied were “E” class (53.6%). Single-family houses were found to use more energy on average (248.0 kWh p /m 2 ) than individual dwellings (183.2 kWh p /m 2 ). Tertiary sector buildings were found to have slightly better energy performance (26.4% of buildings were rated “D class”), with an average energy consumption of 317.8 kWh p /m 2 . Modern buildings consume less energy, as they must meet the higher energy performance requirements stated in thermal building regulations. Residential buildings or building units located in hotter climate zones consume slightly less energy than those located in colder zones, mainly because heating accounts for a high percentage of overall energy expenditure (70–75% in residential buildings). A significant proportion of the energy consumed in tertiary sector buildings is for lighting (37.2%). This research defines the current energy consumption baseline of existing buildings in Spain. The results can help to prioritize energy conservation efforts according to building type, construction period, climate zone and specific end-uses. They may also help public authorities to plan future energy policies, and construction practitioners to identify market segments and business strategies. [ABSTRACT FROM AUTHOR]

• Effects of multi-zone heating systems in residential buildings are assessed. • Data obtained from 336 scenarios in Mediterranean climates are evaluated. • Results are evaluated under economic and energy criteria. This paper explores the effects of multi-zone heating systems in residential buildings in different Mediterranean climates. The aim is to evaluate their potential in residential sectors to provide a general basis from the results (from the energy and economic point of view). In addition, if feasible, a further detailed evaluation of this management strategy for optimising the energy use in residential buildings would also be carried out. To do so, the effects of two different zoning controls in different types of apartment, occupancy patterns, building characteristics and locations in Spain, have been assessed. Different combinations of these parameters have resulted in 336 different scenarios that have been dynamically simulated using Design Builder software. The obtained energy results have been analysed in detail. Moreover, an economic analysis of these results has also been carried out to evaluate the economic feasibility of these systems in residential buildings located in temperate climates. This has been calculated by evaluating the maximum investment that can be assumed in each scenario to achieve different payback periods (namely 10 and 20 years). The results obtained show that these systems could be a cost-effective strategy aimed at reducing the energy consumption in residential buildings, not only in cold climates, such as is shown in the literature (the majority of the studies found are located in the UK and northern countries), but also in more temperate climates, such as that of Spain. Savings of around 20% were obtained in the most usual scenarios in Spain (coherent with results obtained in previous studies in the UK found in the literature), showing that in several cases, the initial investment in zone-controlled systems could be paid off in less than ten years, especially in large apartments and the coldest weather conditions. [ABSTRACT FROM AUTHOR]