Search

Abstract: In this paper all the phases for the realization of the early warning system for the rockslide of Torgiovannetto in Central Italy are described. The landslide consists in a 182,000m3 rock wedge threatening two roads which are important for local transportation. The present work encompasses all the components of an early warning system, including the geological knowledge, the risk scenarios, the kinematic characterization of the landslide, the choice and installation of the monitoring system, the setting of appropriate alarm levels and the definition of plans of civil protection. The focus is on practical and logistical issues met in all these phases and the counter-measures adopted. At present the system consists in 13 wire extensometers, 1 thermometer, 1 rain gauge and 3 cameras. Should a velocity threshold be exceeded by two or more sensors, the attention level would be entered, causing improved monitoring and surveillance. In case the behavior of the landslide changes and, by using expert judgment and forecasting methods, an imminent failure is hinted, then an alarm is issued and the upper road is closed. This paper can provide ideas and solutions for a landslide early warning system that aims to be simple, flexible, versatile and with a low probability of giving false alarms. [Copyright &y& Elsevier]

Landslide geodatabases, including inventories and thematic data, today are fundamental tools for national and/or local authorities in susceptibility, hazard and risk management. A well organized landslide geo-database contains different kinds of data such as past information (landslide inventory maps), ancillary data and updated remote sensing (space-borne and ground based) data, which can be integrated in order to produce landslide susceptibility maps, updated landslide inventory maps and hazard and risk assessment maps. Italy is strongly affected by landslide phenomena which cause victims and significant economic damage to buildings and infrastructure, loss of productive soils and pasture lands. In particular, the Messina Province (southern Italy) represents an area where landslides are recurrent and characterized by high magnitude, due to several predisposing factors (e.g. morphology, land use, lithologies) and different triggering mechanisms (meteorological conditions, seismicity, active tectonics and volcanic activity). For this area, a geodatabase was created by using different monitoring techniques, including remote sensing (e.g. SAR satellite ERS1/2, ENVISAT, RADARSAT-1, TerraSAR-X, COSMO-SkyMed) data, and in situ measurements (e.g. GBInSAR, damage assessment). In this paper a complete landslide geodatabase of the Messina Province, designed following the requirements of the local and national Civil Protection authorities, is presented. This geo-database was used to produce maps (e.g. susceptibility, ground deformation velocities, damage assessment, risk zonation) which today are constantly used by the Civil Protection authorities to manage the landslide hazard of the Messina Province. [ABSTRACT FROM AUTHOR]

Abstract: This paper describes the geometrical structure and the main kinematic features of an ancient and active landslide which develops in structurally complex formations of the Southern Apennines (Italy): a scaly clayey formation in the medium and lower part of the slope, and a stratified marly–calcareous rock formation in the upper part. The landslide 3D geometry was reconstructed by using topographic data, stratigraphies from continuous coring boreholes and inclinometer data. The analysis of the kinematic features was based on the measurement of deep and superficial displacements. Laboratory tests were carried out to evaluate shear strength parameters. It was found that in each investigated transversal section of the landslide channel the displacements can be considered uniform, and that the decrease of the displacement rates, from upslope to downslope, mostly depends on the increase in the areas of transversal sections, the “soil discharge” variations being slight. Stability analyses confirmed that shear strength close to the residual value is available on the slip surface. The large difference between residual strength and peak strength of the landslide material is consistent with the displacement uniformity. [Copyright &y& Elsevier]

Abstract: The paper describes a methodology to detect landslide triggering scenarios in geological homogeneous areas and for some specific landslide categories. In these scenarios, the rainfall–landslide relationship as well as the pluviometric load conditions influencing slope instability have to be investigated. The methodology is applied to an area located in northern Calabria (Italy) and affected by widespread and different slope instability phenomena. Outcropped, fractured, and deeply weathered crystalline rock masses, determining geologic homogeneous conditions, are present. In the same area, suitable and homogeneous climatic features have also been found. According to the methodology adopted, the hydrologic analysis of rainfall time-series is initially carried out notwithstanding historical data concerning landslide mobilization, but using simple models to determine critical pluviometric scenarios for the three landslide categories: shallow, medium-deep, and deep. Landslide-triggering scenarios individualized according to this procedure are less significant as compared to the landslide mobilization detected in the study area by means of historical research and ascribed to the three landslide categories according to geomorphologic analysis. Subsequently, the possible landslide triggering scenarios are outlined by carefully investigating the hydrologic analysis limited to the periods identified according to the historical data. In the study area and approximately for all the areas characterized by the outcrop of fractured and deeply weathered crystalline rocks, significant triggering scenarios can be outlined. In particular, shallow landslide triggers could be activated by rainfall events with intensities exceeding 90 mm/day and/or with amounts exceeding 160 mm. As for medium-deep and deep landslides, triggering mechanisms are more complicated; and effective rainfall contribution must be taken into account compared to groundwater storage. Moreover, a more complex link between deep landslides and precipitation is confirmed. The results obtained to date highlight the potential of this methodology, which enables us to define and progressively improve the knowledge framework by means of a work sequence integrating different disciplinary tools and results. [Copyright &y& Elsevier]

Abstract: The Tessina landslide is a large, seasonally active slope failure located on the southern slopes of Mt. Teverone, in the Alpago valley of NE Italy, consisting of a complex system that has developed in Tertiary Flysch deposits. The landslide, which first became active in 1960, threatens two villages and is hence subject to detailed monitoring, with high quality data being collected using piezometers, inclinometers, extensometers, and through the use of a highly innovative, automated Electronic Distance Measurement (EDM) system, which surveys the location of a large number of reflector targets once every 6 h. These systems form the basis of a warning system that protects the villages, but they also provide a very valuable insight into the patterns of movement of the landslide. In this paper, analysis is presented of the movement of the landslide, concentrating on the EDM dataset, which provides a remarkable record of surface displacement patterns. It is proposed that four distinct movement patterns can be established, which correspond closely to independently defined morphological assessments of the landslide complex. Any given block of material transitions through the four phases of movement as it progresses down the landslide, with the style of movement being controlled primarily by the groundwater conditions. The analysis is augmented with modelling of the landslide, undertaken using the Itasca FLAC code. The modelling suggests that different landslide patterns are observed for different parts of the landslide, primarily as a result of variations in the groundwater conditions. The model suggests that when a movement event occurs, displacements occur initially at the toe of the landslide, then retrogress upslope. [Copyright &y& Elsevier]

This paper focuses on origin, morphology and evolution of seven landslide dams in southeastern Sicily. These landforms are part of a set of 146 landslides recently recognised in this area, which was hitherto considered to have little or no slope instability. Southeastern Sicily consists of a plateau (the Hyblaean Mountains) incised by canyons and surrounded by lower lands. It is underlain mostly by subhorizontal, moderately to well-lithified carbonate rocks. Relief is low.Several lines of evidence justify the assumption of a seismic trigger for the landslides in this area: (1) the geo-climatic environment is not favourable to landsliding, (2) low-angle basal shear surfaces are very frequent, (3) landslide distribution is consistent with the known magnitude–distance relationships for earthquake-induced landslides, (4) historical documents testify to earthquake-triggered slope instability and (5) a specific landslide can be exactly dated.The phenomena illustrated here include six rock slides (one with a debris-flow component) and one rock fall. Slip surfaces are mostly non-circular. Landslide volume ranges from about 50×103 to 34×106 m3.With reference to the Costa and Schuster [Geol. Soc. Am. Bull. 100 (1988) 1054] classification of landslide dams, five cases belong to type II (spanning the entire valley), and two to type IV (failures from both valley sides, with frontal or side contact between failed masses). With reference to Crozier and Pillans [Catena 18 (1991) 471] classification of landslide lakes, all cases show a main valley lake while tributary valley, back and supra lakes are sporadically present. One damming is attributable to the 1693 earthquake with certainty; another damming, to the same earthquake with high probability. Three dams were reincised, one breached or reincised, one is slightly reincised and two more or less intact; correspondingly, five silting up deposits were reincised, one is being reincised at present and two are still under formation. [Copyright &y& Elsevier]