Search

Abstract The goal of this paper is to evaluate the advantages achieved through the adoption of low impact energy saving strategies for an independent natural gas fired boiler heating system in a recently built residential building in Rome. For this purpose, an existing apartment was selected as a case study and dynamically simulated in TRNSYS with which the model was validated. Low impact retrofit solutions and heating system management were considered as possible solutions to achieve energy savings. The chosen retrofit solutions consist of envelope elements replacements and building automation controls improvement while heating system management depends on occupants' behavior. Overall, 36 scenarios were considered, starting from the combination of 3 comfort temperature set-points, 2 insulation levels for transparent components, 2 types of zone comfort set-point control with 3 dead-band temperatures. Each case is evaluated in terms of energy results and economic results. The simulation results provide energy savings up to 44% when windows are replaced lowering their transmittance nearby 32%. The choice of a proportional control for zone temperature set-point compared to a simple on-off control guarantee energy saving up to 39% when temperature set-point is low (19 °C) and controls dead-band is 0.5 °C. The effect of different temperature control dead-bands is higher when proportional controls are adopted (up to 40% passing from 2 to 0.5 °C dead-band for 19 °C set-point). Energy consumption reductions up to 63% are achieved if the indoor temperature set-point is lowered 2 °C, underlining the importance of occupants' behavior. At last, an analysis on socio-economic impacts was performed, based on the results of a previous study focused on the externality costs due to pollutants emissions. Highlights • Energy advantages achieved through the adoption of low impact energy saving strategies for an independent gas fired boiler were evaluated. • An existing apartment of a modern residential building in Rome was selected and dynamically simulated in TRNSYS. • 36 energy saving scenarios were considered. • Each case was evaluated in terms of energy and economic results. • An analysis on socio-economic impacts was performed, based on the externality costs due to pollutants emissions. [ABSTRACT FROM AUTHOR]

Abstract: According to the Energy Performance of Buildings Directive (EPBD) all new European buildings (residential, commercial, industrial, etc.) must since 2006 have an energy declaration based on the calculated energy performance of the building, including heating, ventilating, cooling and lighting systems. This energy declaration must refer to the primary energy or CO2 emissions. The European Organization for Standardization (CEN) has prepared a series of standards for energy performance calculations for buildings and systems. This paper presents related standards for heating systems. The relevant CEN-standards are presented and a sample calculation of energy performance is made for a small single family house, an office building and an industrial building in three different geographical locations: Stockholm, Brussels, and Venice. The additional heat losses from heating systems can be 10–20% of the building energy demand. The additional loss depends on the type of heat emitter, type of control, pump and boiler. [Copyright &y& Elsevier]