Search

• We propose a highly-sensitive phase-interrogated RI sensor based on twin-core fiber with inherent noise suppression. • It is the first time that optical fiber sensing structure is combined with digital holography technology, which works as the phase interrogation method, for measuring environmental parameters. • The background signal is reduced to 1/25 of the original noise level by using phase subtraction method within a single measurement. • Experimental results show that a short response time of about 13 s and a high sensitivity of about 835 rad/refractive index unit (RIU) are obtained. • The achieved high sensitivity is about 47 times higher than the sensitivity of a refractive index plasmonic sensor realized by enabling its quadrupole resonance in phase interrogation (17.46 rad/RIU). In this work, we propose a highly-sensitive phase-interrogated RI sensor based on twin-core fiber with inherent noise suppression. This is the first time that optical fiber sensing structure is combined with digital holography technology, which works as the phase interrogation method, for measuring environmental parameters. The proposed system consists of a Mach–Zehnder interferometer formed by interference between the reference Gauss beam and the sensing dual-beam from the twin-core fiber (TCF). In the sensing optical path, a non-core fiber (NCF) and TCF offset splicing structure works as the differential fluid RI sensing element, which provides the capability of suppressing background signal by calculating the phase difference between the two cores of the TCF. This simple and practical phase subtraction method realizes direct background subtraction within a single measurement and reduces the background signal to 1/25 of the original noise level. The fluid is continuously introduced into a fluid tube in which the sensing fiber is installed to realize in-line measurement of fluid RI. Experimental results show that a short response time of about 13 s and a high sensitivity of about 835 rad/refractive index unit (RIU) are obtained. The high sensitivity benefits from direct interaction between light path and fluid, which is about 47 times higher than the sensitivity of a refractive index plasmonic sensor realized by enabling its quadrupole resonance in phase interrogation (17.46 rad/RIU). This scheme will find many applications in little sample consumption and high sensitivity required analytical measurement owing to its merits of high sensitivity, little sample consumption, fast response, and inherent background noise suppression. [ABSTRACT FROM AUTHOR]

A novel and in-line fiber low-frequency vibration sensor based on Butterfly-Shape Mach-Zehnder Interferometer (BSMZI) is proposed and demonstrated experimentally. The sensing element is a tapered hollow-core fiber (HCF) sandwiched between two single-mode fibers (SMFs). The frequency measured by the Butterfly-Shape vibration sensor can well match with the applied frequency, and the presence of the higher harmonics can verify that the sensor does not distort the measured vibration signal. The maximum relative error of vibration frequency is 0.27%. The intensity of vibration signal (of the fiber sensor) is linearly proportional to the driving power of vibration platform. The vibration measurement sensitivity is 13.575 dB/w in the range of 0.1 w to 0.5 w under a constant vibration frequency of 50 Hz, and the linear fitting coefficient is 0.9556. The proposed sensor has a negligible temperature sensitivity in the range of 30.3 °C–69.5 °C. Because of its compact structure, easy preparation, low production cost, high frequency measurement accuracy of low-frequency vibration, and good linearity of vibration sensing, the proposed BSMZI sensor has potential application prospect in low-frequency vibration sensing field. [ABSTRACT FROM AUTHOR]

A novel Mach–Zehnder Interferometer (MZI) formed by cascading two vase-shaped tapers in a single mode fiber (SMF) is proposed in this work. The vase-shaped taper is fabricated by fusion splicing a fiber sphere with a fiber tip by applying strong arc discharge. The curvature sensing characteristic of the proposed vase-shaped taper-based MZI is experimentally investigated, displaying that the interference spectrum has a blue shift with the increase of applied curvature. The sensor realizes a large range measurement of curvature from 0.9284 m −1 to 4.0470 m −1 with sensitivities of −8.41 nm/m −1 and −16.72 nm/ m −1 in the curvature range of 0.9284 m −1 to 2.4564 m −1 and 2.6025 m −1 to 4.0470 m −1 , respectively. Its temperature-curvature cross-sensitivities are −0.0021 m −1 / °C and −0.0011 m −1 / °C in the two measurement ranges, which are lower than the corresponding curvature resolutions which are 0.0024 m −1 and 0.0012 m −1 . The proposed sensor exhibits the advantages of low cost, negligible temperature cross-sensitivity, fine curvature sensitivity and large measurement scale. [ABSTRACT FROM AUTHOR]

All-fiber Mach-Zehnder interferometers (MZIs) working as curvature sensors have been attracting increasing attention. However, previously reported MZI-based curvature sensors with offset or abrupt-taper structures suffer from weak mechanical strength and low curvature sensitivity. In this letter, a robust and highly-sensitive MZI-based curvature sensor formed by cascading two up-tapers in a single mode fiber (SMF) is proposed and experimentally demonstrated. By optimizing structural parameters of the MZI both in simulation and in experiment, a high quality interference spectrum with a maximum extinction ratio (ER) of around 20 dB is obtained, which is crucial in curvature sensing with spectrum intensity variation and interference dip identifiability being considered. Experimental results show that a high curvature sensitivity of −35.41 nm/m −1 is obtained in the range of 0.6846 m −1 – 1.0606 m −1 , which is 2.4 times higher than that of the interferometer with single-mode-multimode-single-mode (SMS) structure. The two up-tapers, featured by great mechanical strength, are fabricated by only fusion pushing together a whole SMF without cleaving procedure, contributing to excellent repeatability and consistency in the sensor fabrication process. Such an all-fiber sensor exhibits advantages of simple configuration, ease of fabrication, excellent mechanical strength, low cost, and high curvature sensitivity. [ABSTRACT FROM AUTHOR]

• A novel and compact temperature and relative humidity sensor was proposed and implemented. • The sensor was based on compact Mach-Zehnder interferometer and Fabry-Perot interferometer. • Detection of temperature and RH can be achieved by monitoring the spectrums of FPI and MZI. • The sensitivity to RH is −0.132 nm/%RH with resolution of 0.15 %RH. • The sensitivity to temperature is 0.37 nm/°C with the resolution of 0.05 °C. A novel and compact temperature and relative humidity (RH) simultaneously measurement sensor based on compact Mach-Zehnder interferometer (MZI) and Fabry-Perot interferometer (FPI) is proposed and experimental implemented. The sensing structure is made by splicing a 200 μm single mode fiber (SMF) between two 10 cm SMFs with large core-offset. The core-offset distance is 62.8 μm coated with RH sensitive material graphene quantum dots and polyvinyl alcohol (GQDs-PVA). The transmitted structure acts as MZI, and the reflected structure acts as FPI, then the simultaneous detection of temperature and RH can be achieved by monitoring the spectrums of FPI and MZI, respectively. The sensitivity to RH is −0.132 nm/%RH with resolution of 0.15 %RH, and the sensitivity to temperature is 0.37 nm/°C with the resolution of 0.05 °C. The proposed sensor is compact, high sensitivity, simple making and low cost. [ABSTRACT FROM AUTHOR]