Search

Abstract Experiments and Computational Fluid Dynamics (CFD) simulations were performed to investigate the colloidal fouling control of a vibration enhanced reverse osmosis (VERO) membrane system for up to 12 h of operation time. A porous cake mass transfer model for the reverse osmosis (RO) colloidal fouling analysis was derived by combining the cake filtration model, cake enhanced osmotic pressure (CEOP) effect, the critical flux theory, and the solute convection-diffusion model. The process of colloidal particle deposition and fouling formation on the membrane surface were visualized using this model. The permeate flux variation and cake layer distribution along the membrane were depicted. Systematic studies including different initial permeate fluxes, Reynolds numbers, particle concentrations, and vibration frequencies were carried out to investigate the system performance under different operation conditions. The results suggest that colloidal fouling induced permeate flux decline could be improved by the high-frequency vibration in the VERO module. Both simulations and experiments demonstrated that, with a fixed vibration amplitude, membrane module with higher vibration frequencies will have less NaCl accumulation and higher permeate flux under the influence of colloidal fouling. Highlights • The colloidal fouling control performance of the vibration enhanced reverse osmosis technique was investigated. • A cell-based numerical model to analyze the process of membrane colloidal fouling was developed and validated by experiments. • Axial variations of the permeate flux and fouling cake height, the CEOP effect, and critical flux theory were considered. • Membrane colloidal fouling is significantly reduced by the proposed technique based on CFD simulations and experiments. [ABSTRACT FROM AUTHOR]

The performance of a vibration enhanced reverse osmosis membrane module for desalination of artificial seawater was investigated with computational fluid dynamics (CFD) simulations and experiments. The computational model couples fluid dynamics with solutes transport inside the full length domain containing ‘zigzag’ spacers using a two dimensional, transient Large Eddy Simulation turbulence model. Both the local concentration dependent solute properties and variation of permeate flux over the membrane surface were predicted with the model. Membrane local permeate flux, concentration polarization, shear rate, and mass transfer were also calculated. The results suggest concentration polarization in the seawater desalination process could be reduced by imposing vibration on the reverse osmosis membrane. It was determined that the higher the vibration frequency the higher the membrane permeate flux while keeping the vibration amplitude constant. The CFD simulation predictions are validated against experimental data of permeate fluxes with good agreement. [ABSTRACT FROM AUTHOR]

The subject of this work is the development of a novel vibration assisted seawater desalination approach which changes thermodynamic (mass transfer coefficient) and hydrodynamic (cross-flow velocity) properties to mitigate the inorganic fouling for RO membranes. A classical mass transport model and experimental measurements showed that an increased cross-flow velocity in the feed channel enhances the near membrane mass transfer coefficient, which promotes the back-diffusion of inorganic salts and reduces the concentration polarization (CP). Then a theoretical CP Finite Element Method (FEM) model incorporating increased cross-flow velocity reveals that a lower CP modulus forms near the membrane surface with a higher vibration frequency, which results in less fouling on the membrane surface. The vibration assisted desalination process was demonstrated using a linear motor driven, periodically oscillating desalination cell. A smaller flux decline was observed while using a higher vibration frequency (with a constant sinusoidal amplitude) and a higher vibration velocity (in multiple vibration forms). Process simulations and experimental observations validated that the proposed vibration assisted desalination process helps enhance the permeate flux and mitigate the formation of inorganic fouling on the RO membrane surface. [ABSTRACT FROM AUTHOR]

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of Editor-in-Chief in consultation with the authors. The article duplicates multiple figures that had previously appeared in Desalination, 453 (2019) 22-36 without proper citation. (Box 6) [ABSTRACT FROM AUTHOR]