Search

Abstract: Some of the limitations of Reynolds Averaged Navier Stokes (RANS) based Computational Fluid Dynamics CFD codes in computing the flow and temperature field in a rod-bundle are well known. An in-house validation campaign has indicated that the Baseline Reynolds Stress Model (BSL-RSM) with automatic wall treatment is preferred for RANS analyses of a rod-bundle using the CFX code. As a first step in the present paper, the employed CFX code has been assessed with the analyses of a liquid sodium flow in a rod-bundle as in the TEGENA (TEmperatur- und GEschwindigkeitsverteilungen in Stabbündel mit turbulenter NAtriumströmung) experiment. For this RANS analysis, the full cross-section is modelled to avoid numerical issues associated with symmetric boundary conditions. The influence of pitch-to-diameter ratio (p/d) and rod arrangements on thermal-hydraulics is analyzed by applying the assessed modeling approach. For this purpose, rod-bundles with different p/d are arranged in a square and triangular lattice. The computational sub-channels make use of periodic boundary conditions. RANS computed axial velocity normalized with the friction velocity shows the presence of a logarithmic outer region for both arrangements. Similar behavior was reported based on a Large Eddy Simulation (LES) approach. The analyses reveal that the intensity of secondary flow increases with decreasing p/d for both arrangements. RANS analyzed normal Reynolds stresses normalized with centerline velocity in the smallest gap of rod-bundle reveal their anisotropy. Furthermore, the analyses show that the Nusselt numbers increase with p/d for described flow conditions and for both arrangements. Following observations of flow oscillations in a tight lattice rod-bundle as in Hooper''s experiment, as a final step, unsteady RANS simulations for hydraulic analyses using a rod-bundle with small p/d are presented with two commercial CFD codes, namely, CFX and STAR-CCM+. In particular, the analysis of Hooper''s hydraulics experiment with a tight lattice rod-bundle having a p/d of 1.1 demonstrates the existence of flow oscillations or instabilities as inferred in the experiment. [Copyright &y& Elsevier]

Abstract: The lead-cooled reactor is one of the six proposed innovative reactor types by the Generation IV International Forum (GIF). In Europe, the lead-cooled reactor design is known as the European Lead-cooled System (ELSY), which is a 600MWe medium size fast reactor. The reference design of the ELSY core foresees square open (wrapper-less) fuel-assemblies with a staggered arrangement. In this design, the fuel rods in a fuel-assembly are separated by 3.4mm. The gap between fuel rods of neighboring fuel-assemblies is 5.5mm. In other words, the reference gap size between fuel-assemblies is larger than the gap between fuel rods within a fuel-assembly. This article discusses the involved inter fuel-assembly thermal-hydraulics between neighboring fuel-assemblies in the ELSY core. For this purpose as a starting point a validated Reynolds Averaged Navier Stokes (RANS)-based Computational Fluid Dynamics (CFD) approach is adopted. Moreover, bare fuel rods are considered in the present analyses that serve as a step towards inclusion of a spacer grid when its design is fixed. As the next step, the fuel-assemblies are numerically arranged with different gap sizes of 2.1mm and 3.4mm in order to analyze the influence of gap size on the inter fuel-assembly thermal-hydraulics. As a final step, analyses on the influence of different power levels of neighboring fuel-assemblies in the ELSY core are presented based on the reference ELSY core design. These inter-fuel assembly thermal hydraulic analyses lead to a conservative Nusselt number correlation for calculating maximum surface temperature of bare fuel rods that are located in the gap region between neighboring fuel-assemblies having different power levels. Such correlations, when implemented, will improve the applicability of system codes. [ABSTRACT FROM AUTHOR]

Abstract: The demand of reliable and clean energy at affordable prices poses a formidable challenge to the world. The initiatives from various international organizations reserve an important role for liquid metal cooled reactor systems. Assessment of such reactors usually involves unconventional thermal-hydraulics. Consequently, Reynolds Averaged Navier Stokes (RANS) based Computational Fluid Dynamics (CFD) approaches are expected to play a vital role along with various ongoing experiments for the design and the safe operation of these nuclear reactors. One of the major issues is the heat transport in the fuel assembly by the liquid metal. The known difficulties in heat transfer experiments, especially with liquid metals, necessitate the application of RANS in computing details of flow and temperature distribution. Considering these aspects, a four step approach is described in the current paper. As a first step, the heat transfer in a liquid metal flow inside a heated tube is analyzed using a RANS approach and then compared with some of the empirical correlations. The computed Nusselt number reveals the required development length of the thermal boundary layer in liquid metal. Furthermore, these simulations reveal the need of further assessment of this approach and all the existing correlations, and the care that should be taken while applying one of these correlations. In the second step, numerical simulations of the flow of heavy liquid metal around a heated rod in an annular cavity confirm that a RANS strategy can be employed in liquid metal flows. Furthermore, a comparison between computed and experimental non-dimensional axial temperature at the heated rod surface shows that among the considered turbulence models the use of a Baseline-Reynolds Stress Model (BSL-RSM) with automatic wall treatment (AWT) can be preferred for complex geometries. This is also demonstrated in the third step by computing the flow distribution in a triangular arrangement of a fuel assembly and by comparing with an existing hydraulics experiment in rod-bundle. These analyses reveal that the use of the BSL-RSM turbulence model with AWT allows prediction of the cross-flow in this rod-bundle. As the forth and last step, the integral TEGENA (TEmperatur- und GEschwindigkeitsverteilungen in Stabbündel mit turbulenter NAtriumströmung) experiment has been selected for further assessment of RANS based CFD approach in computing both the flow and temperature field. A comparison with literature demonstrates that the use of symmetric boundary condition in such a tightly packed parallel rod-bundle leads to a distorted flow field. The experimentally and the computationally obtained temperature field at a plane in the outlet reveal its acceptable predictive capability. Furthermore, application of two different Reynolds Stress Models yields almost the same temperature distribution as a result of the use of simple first-order gradient model for the turbulent heat fluxes. Consequently, these four steps support the use of this modelling approach for investigating the heat transport in (heavy) liquid metals. Finally, the preferred RANS approach has been applied for thermal-hydraulic evaluation in the square arrangement of a bare rod-bundle as is to be employed in the European Lead-cooled reactor System (ELSY). Also, the influence of rod pitch-to-diameter ratio has been analyzed by numerically re-arranging these rods in the different square lattice. Moreover, arranging the bare rods in triangular lattice at the different rod pitch-to-diameter ratios shows the effect of the square and triangular lattice in thermal-hydraulics. Lastly, comparisons with some of the existing heat transfer correlations for the triangular and the rectangular lattice allows us to identify preferred correlations for these lattice arrangements of bare and liquid metal cooled rod-bundles. [Copyright &y& Elsevier]

Several heliostats are arranged on the field for concentrating beam solar radiation onto a receiver. The flow-induced dust deposition and vibration of heliostats will lead to failure of the receiver and the entire system in eventuality. Therefore, fluid flow analysis behind a heliostat model in a narrow channel of limited length is presented depicting a field-type condition. In this paper, experiment and Large Eddy Simulation (LES) are performed. Laser Doppler Velocimetry (LDV) technique is used for horizontal velocity measurement around a heliostat with 25° angle of inclination at a Reynolds number of 60,000 basing on the length of an inclined plate. The wall-resolved coarse, intermediate and fine grids are utilized for LES with dynamic- Smagorinsky–Lilly and subgrid-scale kinetic energy transport equation based models. Comparison between local instantaneous and statistical quantities, like horizontal velocity and its root-mean-square values are presented. The flow development in the wake region of heliostat model is described using the time-dependent and the statistical horizontal velocity. Based on the adopted LES approach the coherent structures are identified with the λ ci -criterion. The analysis of power spectral density and swirling strength isosurface reveal the responsible coherent structures in the inertial subrange for transport of energy to smaller structures. Interestingly, the presence of hairpin-type vortices is observed extending from the two sides of model heliostat using the λ ci -criterion. Further, instantaneous span-wise vorticity contour reveals their alignment with flow represented by streamlines. The provided insight to these flow features and their organization is expected to frame strategies for mitigating the unsteady flow-induced vibrations and dust depositions on heliostats. [ABSTRACT FROM AUTHOR]