Search

Urban form significantly influences building energy consumption. However, most research has primarily focused on quantifying the relationship between the two factors, with limited exploration of optimizing urban form to enhance building energy performance. Moreover, studies often fail to consider multiple performance objectives simultaneously. This study proposes a multi-objective optimization framework for early urban design stage to improve energy and environmental performance in residential block layouts. The performance objectives include energy consumption, photovoltaic energy potential, and sunlight hours. The framework is implemented using the parametric platform Rhino & Grasshopper, where a parametric model controls the layout of blocks. Ladybug Tools plugin is employed for performance simulation, and Wallacei is used for optimization. An ideal residential block in Jianhu City, China, is taken as a case study. The study generates a total of 1896 valid solutions, including 58 Pareto solutions. The performance of the Pareto solutions demonstrates considerable improvements, indicating the effectiveness of optimizing urban form for enhancing energy and environmental performance. Compared to the initial solution, a typical Pareto solution showcases a 1.5% reduction in energy consumption, a 52.7% increase in photovoltaic energy potential, and a 50% increase in sunlight hours. These findings underscore the pivotal role of urban block morphology in influencing energy consumption, photovoltaic potential, and daylighting. The proposed multi-objective framework in this study enhances and facilitates sustainable block form design, which is expected to provide technical support for energy-efficient or low-carbon urban design. • A multi-objective optimization framework for designing urban block forms is proposed. • Constructing parametric urban block models based on typical local building types. • Daylighting, energy consumption, and PV energy potential are selected as objectives. • The performance of the Pareto solutions is improved compared to the initial solution. [ABSTRACT FROM AUTHOR]

• Uncertainties are the key consideration in the urban building energy model. • This study proposed to energy retrofitting of historical urban block considering uncertainties. • For building energy retrofitting packages with passive and active measures were proposed. • Real energy data was applied to calibrate the energy model with an accuracy of larger than 80%. • This study can be a significant reference for energy retrofitting of historical urban block. Urban building energy model (UBEM) is a powerful tool to simulate performance and evaluate efficiency of upgrades for a group of buildings under the urban context. However, the larger the scale/number of buildings, more parameters must be collected to create energy models that cover each individual building, causing more uncertainties. To reveal this, this study created a UBEM for the mixed modern and historic buildings at a campus in China. The calibrated set of UBEMs with the modeled results meeting the 20% error range, were then used to evaluate uncertainties of energy-savings of four building energy retrofit (BER) measures. The first measure, BER 1, was to preserve the historic values of buildings; BER 2 to meet green building design standard; BER 3 to achieve 20% more savings than BER 2; and BER 4 to utilize renewable photovoltaic energy. For BER 1, BER 2, and BER 3, the energy savings of buildings of different ages varied within 10%–44%. For BER 4, the energy savings of buildings varied within 49%–505%, respectively, where the reason for higher than 100% is energy production is much higher than energy demand. Similar results can be concluded for building functions, for BER 1, BER 2, and BER 3, the energy-saving potentials varied within 6%– 45%, while 97%–492% to BER 4. This study can provide an important and significant reference to apply UBEM in evaluating energy-efficient retrofits as well as other energy-related studies that consider uncertainties. [ABSTRACT FROM AUTHOR]

• An energy-efficient oriented multi-objective urban block form design workflow is proposed. • The relationship between urban form factors and building energy consumption, as well as solar energy potential, is explored. • Reducing energy demand, increasing energy generation, and improving environmental performance should be considered together in the design of energy-efficient blocks. • BD, OSR, SC, and PAR have significant correlations with the total EUI of the block. • FAR, BD, AF, OSR, SC, and PAR are highly correlated with rooftop PV energy generation. Urban form can significantly affect building energy consumption and solar energy potential, which is essential to sustainable urban development. However, few studies have proposed a comprehensive framework to discuss this. In addition, how to bridge the gap between theory and practice, and how to combine quantitative research results with urban form design is also a matter of concern. Based on this background, this study proposes a multi-objective urban form design optimization framework based on the Grasshopper platform. Three optimization objectives were identified: minimum building energy consumption, maximum solar potential and maximum sunlight hours. Then, taking Jianhu in China as an example, the building types are extracted from the actual urban context to create blocks. The Ladybug Tools plugin is used for performance simulation, and multi-objective optimization is run in Wallacei X. Furthermore, based on the optimization process data, a correlation analysis of urban form factors with building energy consumption and solar energy potential is conducted. Finally, the research findings are integrated, and energy-efficient urban form design strategies are proposed. The research results show that a block form with excellent energy performance in Jianhu has the following characteristics: (i) The open space is often located in the center of the block. High-rise buildings are located on the west side. (ii) The block presents a layout consisting of a low south side and high north side. (iii) The orientation of the block is 15° south by westor due south. (iv) Avoid building types with large shape coefficient such as P-4, C-1, S-3 and C-2. In addition, building density (BD), open space ratio (OSR), shape coefficient (SC) and average perimeter-area ratio (PAR) have significant correlations with the total building energy use intensity of the block. For solar potential, floor area ratio (FAR), BD, the average number of floors (AF), OSR, SC, and PAR are highly correlated with rooftop PV energy generation, and sky view factor (SVF) is significantly correlated with rooftop PV energy generation. [ABSTRACT FROM AUTHOR]

• GF-1 and GF-6 remote sensing data have potential for wetland change detection. • Spatial-temporal attention method can identify information changes in cultivated land to wetland areas. • Sanjiang National Nature Reserve has large wetland restoration areas located near water sources. • The results of the study have important implications for the restoration and sustainable development of wetlands. Wetlands are important ecosystems, and detecting changes in wetlands plays a very important role in the management of wetland resources. Therefore, we selected Sanjiang National Nature Reserve as the study area and proposed a method in which bi-temporal GaoFen (GF) remote sensing data was combined with a spatial–temporal attention neural network (STANet) model, coupled with the selection of spectral variables. We used the bi-temporal images from GF-1 and GF-6 and compared three band selection methods, Relief F, principal component analysis, and RGB combination, and two STANet-based change detection methods (BAM: basic spatial–temporal attention module and PAM: pyramid spatial–temporal attention module) to improve the change detection of the wetland restoration. The results show that the accuracy of wetland change detection is related to different combinations of spectral variable selection and STANet models. The combination of Relief F feature selection and the BAM model led to the highest accuracy of the wetland change detection, 71.72 % for F1-Score and 76.92 % for MIou. The vector results of the change detection statistics show that the area of the Sanjiang National Nature Reserve cultivated lands converted to wetlands is 46.05 km2. This study implies that the STANet method has the capacity of detecting complex wetland restoration. Red, Bule, NIR and Red Edge1 bands of GaoFen data can provide effective information in the detection of changes in wetlands. The results of the study can be used as a reference for rational planning of wetland restoration, seeking a balance between cultivated lands and wetlands, which is important for the sustainable development of wetland. [ABSTRACT FROM AUTHOR]

Energy-efficient urban design is an important prerequisite to sustainable urban development and reduction of greenhouse gas emissions. This study proposes an automatic framework to optimize urban design through the use of an urban building energy model. Three optimization goals were defined: maximum solar energy utilization, solar lighting of the first floor, and minimum building energy demand. Urban morphology was integrated into the optimization process as the bridge between the urban design scenario and the actual urban block. To validate the model, this study abstracted basic urban forms from actual urban contexts to generate urban blocks with the Rhino tool and run optimization in the Wallacei X, for multi-objective optimization in Rhino. The long short-term memory (LSTM) network was applied to infer energy performance of 41 actual urban blocks in Jianhu, China. In the results, the proposed framework can be validated feasibly with optimization of 100 iterations. A set of optimal results will be achieved for three goals and five clusters defined for different concerns of urban design strategies. The LSTM can achieve the best accuracy of 1.21% and 1.37% for energy generation of photovoltaic and total building energy use intensity respectively. • Low-energy urban design is important to sustainable urban development. • Enhancing solar utilization and reducing energy demand are important in urban design. • Urban building energy modeling is a popular and inspiring tool in urban design. • This study proposes an automatic low-energy urban design using simulation and data-driven approach. • The framework is validated feasibly by actual urban design and real urban blocks. [ABSTRACT FROM AUTHOR]

• Dongting Lake has experienced land covers changes due to extreme hydrologic events. • We use qualitative and quantitative methods for change detection in Dongting Lake. • A new change detection method Bi-SRUNet++ is proposed for change detection. • This method has the great potential to improve the accuracy of wetland change detection. • The obtained information is important for wetland management and sustainable development. The utility of semantic change detection in myriad change scenarios has garnered considerable attention in contemporary research; however, its applicability in monitoring alterations in wetland ecosystems remains incompletely elucidated. To surmount the constraints associated with binary change detection methodologies—chiefly their insufficiency in the extraction of bi-temporal attributes—we introduced the Bi-Temporal Semantic Reasoning UNet++ (Bi-SRUNet++) algorithm. This algorithm leverages the architectural strengths of UNet++ as its foundational network to precisely delineate features pertinent to multi-class change detection. As a preliminary step, the study focused on the Dongting Lake wetland in China and conducted an analysis of feature trends predicated upon the monthly Normalized Difference Water Index (NDWI) and Normalized Difference Vegetation Index (NDVI), as derived from Landsat 8 data spanning 2021–2022. Subsequently, the optimal temporal phases for change detection were ascertained through differential analyses between NDWI and NDVI metrics. Implementing the Bi-SRUNet++ algorithm on a pair of Sentinel-2 images, captured during the optimal phases, yielded augmented change information. Comparative evaluations reveal that the Bi-SRUNet++ algorithm, conceptualized on the framework of Bi-Temporal Semantic Reasoning Network (Bi-SRNet), surpasses the performance indices of its counterpart Semantic Segmentation and Change Detection Late Fusion (SSCD-l). Furthermore, the incorporation of the UNet++ backbone network amplifies the algorithm's capacity for semantic feature extraction, thereby enhancing the efficacy of Bi-SRUNet++ in wetland change detection. The analysis divulges that the total altered area of Dongting Lake during the 2021–2022 period amounts to 1187.97 km2, comprising a water loss of 1186.16 km2, a 715.34 km2 transformation into vegetation, and a conversion of 469.96 km2 into mudflats. The codes and partial dataset in this paper are available at: https://github.com/vivianmiumiu/Bi-SRUNetplusplus-for-SCD. [ABSTRACT FROM AUTHOR]

Buildings are one of the most important energy use sectors in cities, and forecasting the abnormal increase in building energy demand in certain climatic conditions is necessary to adjust building energy operations and implement energy policy. Accordingly, this research proposes a data-driven abnormally high energy demand detection framework in urban buildings based on their design parameters and local weather data, with the support of machine learning techniques. In this study, 71 public buildings with energy records in Jianhu city, Jiangsu province, China, were selected to abstract urban morphologies at community scale. The weather profile for the city was obtained from year 2015–2018 to create weather characteristics. Three machine learning algorithms—random forest, support vector machine, and artificial neural network—were applied to identify the months of abnormally high electricity consumption in different building types. This framework also explores key variables in the data and provides the basis for a system that prioritizes the acquisition of variables when complete data is unavailable. The results show that, with complete data, the accuracy score of the system in this study can reach 0.854 with the SVM algorithm, and the model returned an accuracy of 0.865 with the RF model after the key variable selection. Based on those results, the framework in this study can generate preemptive warnings for months with an expected abnormally high energy consumption in target buildings as a prerequisite of energy policy. • A data-driven abnormally high electricity use detection system is proposed. • Different morphologies under different weather conditions were tested. • Key factors of urban morphologies and weather conditions were identified. • Three machine learning techniques were applied for the prediction in the system. • This study can be applied for energy management in building and urban scales. [ABSTRACT FROM AUTHOR]

Abstract: Using 10-year lightning localization data observed by the TRMM (Tropical Rainfall Measuring Mission) Lightning Imaging Sensor (LIS), the relationship between lightning activity and a series of convective indices was investigated over nine monsoon-prone areas of China in which high-impact weather (HIW) events are frequently observed. Two methods were used to verify and reconstruct LIS lightning data. First, LIS lightning flash data were verified by both surface thunderstorm reports and ground-based lightning detection data. Seasonal, monthly, and 5-day distributions of LIS observed lightning activity agree well with the surface reports and ground-based lightning observations. Second, due to LIS''s low sampling frequency, a data reconstruction and compensation scheme for LIS lightning observations was designed using both LIS lightning seasonal diurnal cycles and surface thunderstorm reports. After data reconstruction, five lightning products were derived: daily mean and maximum LIS flash rate, daily mean and maximum LIS lightning cell rate, and number of lightning days per five day period. Then, a series of convective indices describing convection conditions were derived from radiosonde data according to atmospheric instability and convective potential analysis. Correlation analysis for each study region was done between 10-year lightning derived products and corresponding convective indices by 5-day periods. The correlation analysis results show that higher lightning flash rate and lightning probability are associated with more unstable air and smaller vertical wind shear in a nearly saturated lower layer in most of the study regions. But the correlation varies from region to region. The best correlation between lightning activity and convective indices was found in eastern and southern China, whereas the correlation is lowest in some inland or basin topography regions in which topographic effects are more significant. Moreover, ambient moisture plays a much more important role in the convective development of thunderstorms in southern China than other regions. Thunderstorm development mechanism differences among regions were also discussed. Based on the close relationship between lightning activity and convective indices, some regression equations for forecasting 5-day mean or maximum LIS lightning flash rate and lightning area (a thunderstorm cell) rate, and 5-day lightning days for the study regions were developed using convective indices as predictors. The verifications show that the convective index-based lightning forecast methods can provide a reasonable lightning outlook including probability and lightning flash rate forecasts for a 5-day period. [Copyright &y& Elsevier]