Search

Wi-Fi, which enables convenient wireless access to Internet services, has become integral to our modern lives. With widely-deployed Wi-Fi infrastructure, modern people can enjoy a variety of online services such as web browsing, online shopping, social interaction, and e-commerce almost at any time and any place. Traditionally, the most significant functionality of Wi-Fi is to enable high-throughput data communication between terminal devices and the Internet. However, beyond that, we observe that a novel type of system based on commodity Wi-Fi is increasingly attracting intense academic interest. Without hardware modification and redeployment, researchers are exploiting channel state information output by commodity Wi-Fi and transforming existing Wi-Fi systems into radar-like ones that can recognize human behavior along with data communication. This fancy functionality is tremendously expanding the boundaries of Wi-Fi to a new realm and triggering revolutionary applications in the context of the Internet of Things. In this article, we provide a guide to and introduce the impressive landscape of this new realm. [ABSTRACT FROM AUTHOR]

Radio frequency (RF) based technologies play an important role in indoor localization, since Radio Signal Strength (RSS) can be easily measured by various wireless devices without additional cost. Among these, radio map based technologies (also referred as fingerprinting technologies) are attractive due to high accuracy and easy deployment. However, these technologies have not been extensively applied on real environment for two fatal limitations. First, it is hard to localize multiple objects. When the number of target objects is unknown, constructing a radio map of multiple objects is almost impossible. Second, environment changes will generate different multipath signals and severely disturb the RSS measurement, making laborious retraining inevitable. Motivated by these, in this paper, we propose a novel approach, called Line-of-sight radio map matching, which only reserves the LOS signal among nodes. It leverages frequency diversity to eliminate the multipath behavior, making RSS more reliable than before. We implement our system MODLoc based on TelosB sensor nodes and commercial 802.11 NICs with Channel State Information (CSI) as well. Through extensive experiments, it shows that the accuracy does not decrease when localizing multiple targets in a dynamic environment. Our work outperforms the traditional methods by about 60 percent. More importantly, no calibration is required in such environment. Furthermore, our approach presents attractive flexibility, making it more appropriate for general RF-based localization studies than just the radio map based localization. [ABSTRACT FROM AUTHOR]

In traditional radio-based localization methods, the target object has to carry a transmitter (e.g., active RFID), a receiver (e.g., 802.11\times detector), or a transceiver (e.g., sensor node). However, in some applications, such as safe guard systems, it is not possible to meet this precondition. In this paper, we propose a model of signal dynamics to allow the tracking of a transceiver-free object. Based on radio signal strength indicator (RSSI), which is readily available in wireless communication, three centralized tracking algorithms, and one distributed tracking algorithm are proposed to eliminate noise behaviors and improve accuracy. The midpoint and intersection algorithms can be applied to track a single object without calibration, while the best-cover algorithm has higher tracking accuracy but requires calibration. The probabilistic cover algorithm is based on distributed dynamic clustering. It can dramatically improve the localization accuracy when multiple objects are present. Our experimental test-bed is a grid sensor array based on MICA2 sensor nodes. The experimental results show that the localization accuracy for single object can reach about 0.8 m and for multiple objects is about 1 m. [ABSTRACT FROM AUTHOR]

Improving channel utilization is a well-known issue in wireless networks. In traditional point-to-point wireless communication, significant efforts had been made by the existing studies on enhancing the utilization of the channel access time. However, in the emerging wireless network using MU-MIMO, considering only the time domain in channel utilization is not sufficient. As multiple transmitters are allowed to transmit packets simultaneously to the same AP, allowing more antennas at AP would lead to higher channel utilization. Thus, the channel utilization in MU-MIMO should consider both time and spatial domains, i.e., the channel access time and the antenna usage, which have not been considered in the existing methods. In this paper, we point out that the fundamental problem is lacking of the antenna information of contention nodes in channel contention. To address this issue, we propose a new MAC-PHY architecture design, CUTS, to allow distributed nodes effectively contend for the channel and utilize the channel in both domains. Particularly, CUTS adopts interference nulling to attach the antenna information in channel contention. Meanwhile, techniques such as channel contention in frequency domain and ACK in frequency domain using self-jamming are adopted. Through the software defined radio-based real experiments and extensive simulations, we demonstrate the feasibility of our design and illustrate that CUTS provides better channel utilization with the gain over IEEE 802.11 reaching up to 470 percent. [ABSTRACT FROM AUTHOR]

Crowdedness spot is a crowded area with an abnormal number of objects. Detecting the crowdedness spots of moving vehicles in an urban area is essential to many applications. An intuitive method is to cluster the objects in areas to get the density information. Unfortunately, the data capturing vehicle mobility possesses some new features, such as highly mobile environments, supremely limited size of sample objects, and nonuniform biased samples, and all these features have raised new challenges that make traditional density-based clustering algorithms fail to retrieve the real clustering property of objects, making the results less meaningful. In this paper, we propose a novel nondensity-based approach called mobility-based clustering. The key idea is that sample objects are employed as “sensors” to perceive the vehicle crowdedness in nearby areas using their instant mobility rather than the “object representatives.” As such, the mobility of samples is naturally incorporated. Several key factors beyond the vehicle crowdedness have been identified, and techniques to compensate these effects are accordingly proposed. Furthermore, taking the detected crowdedness spots as a label of the taxi, we can identify one particular taxi to be a crowdedness taxi that crosses a number of different crowdedness spots. We evaluate the performance of our methods and baseline approaches based on real traffic situations (to retrieve the real traffic crowdedness) and real-life data sets. Finally, the interesting findings are provided for further discussions. [ABSTRACT FROM PUBLISHER]

Interference is a critical issue in wireless communications. In a typical multiple-user environment, different users may severely interfere with each other. Coordination among users therefore is an indispensable part for interference management in wireless networks. It is known that coordination among multiple nodes is a costly operation taking a significant amount of valuable communication resource. In this paper, we have an interesting observation that by generating intended patterns, some simultaneous transmissions, i.e., "interference,” can be successfully decoded without degrading the effective throughput in original transmission. As such, an extra and "free” coordination channel can be built. Based on this idea, we propose a DC-MAC to leverage this "free” channel for efficient medium access in a multiple-user wireless network. We theoretically analyze the capacity of this channel under different environments with various modulation schemes. USRP2-based implementation experiments show that compared with the widely adopted CSMA, DC-MAC can improve the channel utilization efficiency by up to 250 percent. [ABSTRACT FROM PUBLISHER]

In wireless networks, a client's locations can be estimated using signal strength received from signal transmitters Static fingerprint-based techniques are commonly used for location estimation, in which a radio map is built by calibrating signal-strength values in the offline phase, These values, compiled into deterministic or probabilistic models, are used for online localization. However, the radio map can be outdated when signal-strength values change over time due to environmental dynamics, and repeated data calibration is infeasible or expensive. In this paper, we present a novel algorithm, known as Location Estimation using Model Trees (LEMT), to reconstruct a radio map by using real-time signal-strength readings received at the reference points. This algorithm can take real-time signal-strength values at each time point into account and make use of the dependency between the estimated locations and reference points. We show that this technique can effectively accommodate the variations of signal strength over different time periods without the need to repeatedly rebuild the radio maps. The effectiveness of LEMT is demonstrated using two real data sets collected from an 802.1 lb wireless network and a Radio Frequency Identification (RFID)-based network. [ABSTRACT FROM AUTHOR]

Many research activities on Wireless Sensor Networks (WSNs) need detailed performance statistics about protocols, systems, and applications; however, current simulation tools and testbeds lack mechanisms to report these statistics realistically and conveniently. To address this need, we have developed a WSN emulator, VMNet. VMNet emulates networked sensor nodes at the level of CPU clock cycles and executes the binary code of real applications directly. It emulates the radio channel with loss and noise as well as emulates the peripherals in sufficient detail. Moreover, VMNet takes parameter values from the real world and logs detailed runtime information of emulated nodes. Consequently, the application performance, both in response time and in power consumption, is reported realistically in VMNet, as demonstrated by our comparison studies with real sensor networks. [ABSTRACT FROM AUTHOR]

Reliable communications are essential for most applications in wireless sensor networks (WSNs). In traditional approaches, the per-hop and end-to-end (E2E) recovery schemes are widely used. These schemes, however, suffer from low E2E success rate and poor energy efficiency in large-scale real environments. Through empirical studies, in this paper we identify three major problems that hinder the efficient and reliable communications. To address these problems, we propose a novel in-middle recovery scheme and realize it by designing and implementing a proliferation routing. Proliferation routing integrates three core technologies, namely, capability-based path finder, a randomized dispersity, and reproduction. Proliferation routing offers great flexibilities for transmissions. It cannot only be applied with any Medium Access Control (MAC) protocols and routing metrics, but also obtains a desired service quality (i.e., transmission success rate, energy cost, etc.) by controlling the system parameters. To demonstrate the effectiveness of proliferation routing, we thoroughly analyze its performance. We also conduct performance evaluations through implementation experiments as well as simulations. In a specific experimental setup, proliferation routing can increase the E2E transmission success rate up to 80 percent compared with the well-known hop-based routing and flooding. [ABSTRACT FROM PUBLISHER]