Search

This article presents a two-stage T-type hybrid five-level transformerless inverter (TLI) for grid-connected photovoltaic (PV) applications. The proposed T-type hybrid five-level inverter and its level-shifted pulsewidth modulation scheme offers reduced leakage current by eliminating the high-frequency variations and sudden transitions in the voltage across PV parasitic capacitance CPV and a path for the negative current in all the modes of operation under unity and nonunity power factor conditions of the grid without degrading the waveform quality. Moreover, in this article, the proposed inverter is integrated with a traditional three-level boost converter (3LBC) for boosting the lower PV voltage to higher dc-link voltage and also to extract maximum power from the PV source. The 3LBC provides high efficiency and reduced input inductor size for the same power rating over the conventional boost converter. The simulation results of the proposed system are presented using MATLAB software, and a 500-W experimental prototype is constructed and tested in the laboratory to validate the feasibility of the proposed configuration. Finally, a comparison of the proposed inverter with other five-level TLI topologies is presented to highlight its merits. [ABSTRACT FROM AUTHOR]

Transformerless inverters are getting popular in distributed photovoltaic power generation (PVPG) system due to its light weight, low cost, and higher efficiency in power conversion. However, the production of leakage current leads to severe electromagnetic interference and operational insecurity, which declines the reliability and efficiency of the overall system. Besides that many of the topologies have been addressed with real power injection capabilities in the literature. Therefore, in this paper, an improved hybrid-bridge (IH-B) inverter for transformerless PVPG system is proposed with 1) reduced leakage current by abolishing the fluctuations in common-mode voltage (CMV) due to switch junction capacitances and 2) reactive power capability with a modified sinusoidal pulsewidth modulation technique. This topology is constructed with the combination of bidirectional clamping branch and hybrid-bridge (H-B) inverter topology to maintain CMV at half of the dc-link voltage and ensure better quality of output waveforms at different power factors of the grid. Further, MATLAB simulation results of the IH-B and H-B topologies are presented and compared to prove the potential benefits of the proposed topology. Finally, a 500W prototype model is built and tested to validate the effectiveness of the IH-B topology in reduction of leakage current and reactive power capability. [ABSTRACT FROM AUTHOR]