Search

A standardized preparation process is proposed in this study for achieving optimal strength and vegetative properties in vegetated concrete, using Yunnan red soil as a growth substrate for plants. The porosity of vegetated concrete is a crucial factor influencing plant growth, while compressive strength is a significant mechanical property. To assess the strength and porosity of vegetated concrete, different design porosities (22%, 24%, 26%, 28%) and cement-to-aggregate ratios (4, 5, 6, 7) were utilized in the preparation of vegetated concrete samples. The shell-making and static-pressure-molding methods were optimized for specimen preparation. Analyzing the stress–strain full curve characteristics of vegetation-type concrete under different influencing factors, an in-depth investigation into its failure mechanism was conducted. It was determined that the design porosity and cement content significantly impact the concrete's performance, particularly in terms of 30-day compressive strength and effective porosity. Furthermore, an increase in the fly ash ratio led to an increase in porosity and a decrease in compressive strength, providing a certain guidance for optimizing concrete performance. Comparative analysis through vegetation experiments revealed that black rye grass exhibited favorable growth adaptability compared to other grass species. [ABSTRACT FROM AUTHOR]

To study the corrosion behavior of cement soil in peat soil, the experiment involves the preparation of peat soil by incorporating humic acid into cohesive soil with a lower organic matter content. Cement soil samples are then prepared by adding cement to the mixture. These samples are subjected to immersion in fulvic acid solution and deionized water to simulate different working environments of cement soil. The experiment considers immersion time as the variable factor. It conducts observations of apparent phenomena, ion leaching tests, and unconfined compression strength tests on the cement soil. The experiment results are as follows: (1) With increasing immersion time, the surface of the cement soil in the peat soil environment experiences the disappearance of Ca(OH)2 and calcium aluminate hydrate. Additionally, large amounts of bird dropping crystals precipitate on the surface and within the specimen. The cement soil undergoes localized disintegration due to extensive erosion caused by swelling forces. (2) In the peat soil environment, fulvic acid reacts with the hydration products of cement, resulting in partial leaching of ions such as Ca2+, Mg2+, Al3+, and Fe3+ into the immersion solution. The lower the pH of the fulvic acid immersion (indicating higher concentration), the more significant the ion leaching. Increasing the ratio of humic acid to cement can slow down the leaching of ions. The cement soil undergoes dissolutive erosion in the peat soil environment. (3) The peat soil environment exerts both strengthening and corrosive effects on the cement soil. Cement soil without humic acid exhibits noticeable corrosion in the peat soil environment, gradually decreasing strength as immersion time increases. The strength decreases by 83% from 28 to 365 days. In contrast, cement soil with humic acid experiences an initial period of strengthening, leading to a significant increase in strength in the short term (34% increase from 28 to 90 days). However, the corrosive effects gradually dominate, resulting in a decrease in strength over time. The strength decreases by 80% from 90 to 365 days. This study also explores the strengthening effects of peat soil on cement soil. It identifies phenomena such as extensive erosion and new substance precipitation in cement soil. [ABSTRACT FROM AUTHOR]

Many peat soils are distributed around plateau lakes, and the reinforcement of peat soils with high organic matter content by ordinary cement cannot meet the actual engineering requirements. In order to obtain better mechanical properties and durability of the reinforcement, this experiment prepared peat soil by mixing humic acid reagent into the alluvial clay soil with low organic matter content. The cement soil samples were prepared by adding cement and ultrafine cement (UFC) by stirring method; the samples were then soaked in fulvic acid solution to simulate the cement soil in the peat soil environment. Using the unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and pores and cracks analysis system (PCAS) test, the effect of UFC content change on cement soil's humic acid erosion resistance was explored, and the optimal UFC content range was sought. The results of the UCS test show that with an increase in immersion time, the strength curves of cement soil samples gradually increase to the peak strength and then decrease. Significant differences in the time correspond to the peak strength, and the overall presentation is two processes: the strength enhancement stage and the corrosion stage of the sample. The incorporation of UFC makes the cement soil in the peat soil environment exhibit excellent corrosion resistance, and the optimal UFC content is 10%. The results of the SEM and PCAS tests show that the microstructure of cement soil after immersion time exceeds 90 days, increases with an increase in immersion time, and its structural connectivity gradually weakens. The excellent characteristics of UFC particles, such as small particle size, narrow particle size distribution, fast hydration reaction rate, high hydration degree, and many hydration products, weakened the adverse effects of humic acid on the cement soil structure to a certain extent. Therefore, although the number of macropores increases, they are not connected. It still presents a relatively compact honeycomb overall structure, which correlates well with the UCS results. [ABSTRACT FROM AUTHOR]

Simple Summary: Toxoplasmosis is one of the most common parasitic zoonoses in the world. It not only threatens human health and safety but also causes considerable losses to the global animal husbandry industry. Swine, as an intermediate host of Toxoplasma gondii, has important economic and public health significance, and the global prevalence of T. gondii in swine varies between 10% and 60%. Therefore, it is important to establish simple, effective, sensitive and specific diagnostic methods for the detection and prevention of T. gondii infection in swine. In the present study, we developed a colloidal gold immunochromatographic strip based on rTgROP14, recombinant protein A and monoclonal antibody TgROP14-5D5 for serological detection of T. gondii in swine populations. This new ICT achieved good specificity and sensitivity and has potential for routine serological detection of T. gondii in swine. Toxoplasma gondii, a worldwide distributed apicomplexan protozoan, can infect almost all warm-blooded animals and may cause toxoplasmosis. In order to provide a point-of-care detection method for T. gondii infection, an immunochromatographic test (ICT) was established. The proposed test uses recombinant T. gondii rhoptry protein 14 (ROP14) conjugated with 20 nm gold particles, recombinant protein A as the detection line and monoclonal antibody TgROP14-5D5 as the control line. The specificity, sensitivity, positive predictive value, negative predictive value and stability of this new ICT were evaluated. rTgROP14 was specifically recognized by positive serum of T. gondii but not negative serum. mAb TgROP14-5D5 showed higher specific recognition of T. gondii antigens and was therefore selected for subsequent colloidal gold strip construction. The new ICT based on TgROP14 exhibited good diagnostic performance with high specificity (86.9%) and sensitivity (90.9%) using IHA as a "reference standard". Among 436 field porcine sera, ICT and IHA detected 134 (30.7%) and 99 (22.7%) positive samples, respectively. The relative agreement was 87.8%. These data indicate that this new ICT based on TgROP14 is a suitable candidate for routine testing of T. gondii in the field. [ABSTRACT FROM AUTHOR]