Search

A novel photonic crystal fiber (PCF) sensor for refractive index detection based on polydimethylsiloxane (PDMS) is presented in this research, as well as designs for single-channel and dual-channel structures for this PDMS-PCF sensor. The proposed structures can be used to develop sensors with biocompatible polymers. The performance of the single-channel PDMS-PCF sensor was studied, and it was found that adjusting parameters such as pore diameter, lattice constant, distance between the D-shaped structure and the fiber core, and the radius of gold nanoparticles can optimize the sensor's performance. The findings indicate that the detection range of the single-channel photonic crystal is 1.21–1.27. The maximum wavelength sensitivity is 10,000 nm/RIU with a resolution of 1 × 10 − 5 RIU, which is gained when the refractive index is set to 1.27. Based on the results of the single-channel PCF, a dual-channel PDMS-PCF sensor is designed. The refractive index detection range of the proposed sensor is 1.2–1.28. The proposed sensor has a maximum wavelength sensitivity of 13,000 nm/RIU and a maximum resolution of 7.69 × 10 − 6 RIU at a refractive index of 1.28. The designed PDMS-PCF holds tremendous potential for applications in the analysis and detection of substances in the human body in the future. [ABSTRACT FROM AUTHOR]

With the in-depth study of solid-state batteries (SSBs), various in situ and ex situ characterization technologies have been widely used to study them. The performance and reliability of SSBs are limited by the formation and evolution of lithium dendrites at the interfaces between solid electrodes and solid electrolytes. We propose a new method based on optical coherence tomography (OCT) for in situ characterization of the internal state of solid-state batteries. OCT is a low-loss, high-resolution, non-invasive imaging technique that can provide real-time monitoring of cross-sectional images of internal structures of SSBs. The morphology, growth, and evolution of lithium dendrites at different stages of cycling under various conditions can be visualized and quantified by OCT. Furthermore, we validate and correlate the OCT results with scanning electron microscopy (SEM) and XPS, proving the accuracy and effectiveness of the OCT characterization method. We reveal the interfacial phenomena and challenges in SSBs and demonstrate the feasibility and advantages of OCT as a powerful tool for in situ and operando imaging of battery interfaces. This study provides new insights into the mechanisms and factors that affect SSB performance, safety, and lifetime, and suggests possible solutions for improvement and application in the field of applied energy. [ABSTRACT FROM AUTHOR]

In recent years, owing to the continuous development of polymer nanofiber manufacturing technology, various nanofibers with different structural characteristics have emerged, allowing their application in the field of sensing to continually expand. Integrating polymer nanofibers with optical sensors takes advantage of the high sensitivity, fast response, and strong immunity to electromagnetic interference of optical sensors, enabling widespread use in biomedical science, environmental monitoring, food safety, and other fields. This paper summarizes the research progress of polymer nanofibers in optical sensors, classifies and analyzes polymer nanofiber optical sensors according to different functions (fluorescence, Raman, polarization, surface plasmon resonance, and photoelectrochemistry), and introduces the principles, structures, and properties of each type of sensor and application examples in different fields. This paper also looks forward to the future development directions and challenges of polymer nanofiber optical sensors, and provides a reference for in-depth research of sensors and industrial applications of polymer nanofibers. [ABSTRACT FROM AUTHOR]

SNX5 is a protein that is involved in endosomal sorting, signal transduction and endocytosis pathways. However, the roles of fish SNX5 were largely unknown. In this study, we identified an SNX5 homolog (EcSNX5) from an orange-spotted grouper (E. coioides) and investigated its role during viral infection. EcSNX5 encoded 412 amino acids with a PX domain and a BAR domain. In addition, it shared high identities with other known fish SNX5. Through quantitative real-time polymerase chain reaction (qRT-PCR), the high expression of EcSNX5 was observed in the head, kidney and heart. After stimulation with the red-spotted grouper nervous necrosis virus (RGNNV) in vitro, EcSNX5 expression was significantly induced. After RGNNV infection in vitro, EcSNX5 overexpression enhanced the expression of RGNNV genes, including coat protein (CP) and RNA-dependent RNA polymerase (RdRp). EcSNX5 knockdown downregulates expression of CP and RdRp. The TCID50 assay showed a higher viral titer when EcSNX5 is over expressed. Moreover, EcSNX5 overexpression could reduce the expression of interferon genes (IRF1, IRF3, IRF7, MX1, ISG15, ISG56, MDA5 and TRIF) and inflammatory genes (IL6, IL8, IL-1β and TNF-α). EcSNX5 knockdown could promote the expression of interferon factors and inflammatory factors. Moreover, EcSNX5 overexpression suppresses the expression of autophagy genes (LC3-II, BECN1, ATG5 and ATG16L1) and upregulates the expression of apoptosis genes (Bax, BNIP3), but EcSNX5 knockdown had the opposite effect. According to the subcellular localization, EcSNX5 is localized in the cytoplasm and co-localizaed with RGNNV CP protein. The results showed EcSNX5 can influence viral infections by regulating the expression of interferon factors and inflammatory factors as well as adjusting virus-induced autophagy. These data will contribute to a better understanding of the immune response of fish during virus infection. [ABSTRACT FROM AUTHOR]

The International Global Navigation Satellite Systems Service (IGS) ionospheric total electron content (TEC) data are used to study the periodic perturbation in the ionosphere during the 2019 Antarctic sudden stratospheric warming (SSW) event, a rare Southern Hemisphere minor SSW event in the last 40 years. A 14.5 day periodic signal with a zonal wavenumber of 0 is observed in the mesosphere and the lower thermosphere (MLT) region and the ionosphere during this SSW period, which could be related to the lunar tide. The 14.5 day periodic disturbance in the IGS TEC exhibits local time dependence and latitudinal variation, with the maximum amplitude appearing between 1000 and 1600 LT in the equatorial ionization anomaly (EIA) crest regions. Additionally, the 14.5 day periodic oscillation shows an obvious longitudinal variability, with the weakest amplitude appearing in the longitudinal region of 30° W–60° E. [ABSTRACT FROM AUTHOR]

Benign prostatic hyperplasia (BPH) is a common male condition that impacts many men's quality of life by generating lower urinary tract symptoms (LUTS). In recent years, inflammation has become very common in the prostate, and BPH with inflammation has a higher International Prostate Symptom Score (IPSS) score and an enlarged prostate. Chronic inflammation leads to tissue damage and the release of pro-inflammatory cytokines, which play an important role in the pathogenesis of BPH. We will focus on current advancements in pro-inflammatory cytokines in BPH, as well as the future of pro-inflammatory cytokine research. [ABSTRACT FROM AUTHOR]

Background: Many studies explored the prognostic value of the modified Glasgow Prognostic Score (mGPS) in urothelial carcinoma (UC), but the results are controversial. This study aimed to quantify the relationship between pretreatment mGPS and survival in patients with UC. Methods: A systematic literature search was conducted using Embase, PubMed, and Web of Science to identify eligible studies published before August 2022. Pooled hazard ratios (HRs) with 95% confidence intervals (CIs) were used to assess the association between pretreatment mGPS and the prognosis of UC. Results: Thirteen eligible studies involving 12,524 patients were included. A high mGPS was significantly associated with poor overall survival (mGPS 1/0: HR = 1.33, 95% CI 1.12–1.58, p = 0.001; mGPS 2/0: HR = 2.02, 95% CI 1.43–2.84, p < 0.0001), progression-free survival (mGPS 1/0: HR = 1.26, 95% CI 1.03–1.53, p = 0.021; mGPS 2/0: HR = 1.76, 95% CI 1.12–2.77, p = 0.013), recurrence-free survival (mGPS 1/0: HR = 1.36, 95% CI 1.18–1.56, p < 0.0001; mGPS 2/0: HR = 1.70, 95% CI 1.44–2.000, p < 0.0001), and cancer-specific survival (mGPS 2/0: HR = 1.81, 95% CI 1.30–2.52, p < 0.0001). A subgroup analysis of OS also yielded similar results. Conclusions: Evidence suggests that high pretreatment mGPS in UC is closely related to poor survival. Pre-treatment mGPS is a powerful independent prognostic factor in patients with UC. [ABSTRACT FROM AUTHOR]

Due to its low calorific value, abnormal phenomena such as incomplete combustion and flameout may occur during the combustion process of biomass syngas. The applicability of adding hydrogen can assist in the combustion of biomass syngas in boilers to overcome the above defects, and the effects need to be investigated. In this study, a multi-mechanism model is employed to numerically simulate the flow and combustion of a horizontal boiler burning biomass syngas. The reliability verification of the model is conducted by comparing it with the experimental results of combustion in a domestic boiler with biomass syngas. From the views of multi-fields and synergy, the effects of hydrogen addition on the thermal performance and emissions of biomass syngas are further expounded. Two scenarios are taken into consideration: hydrogen addition at a constant fuel volume flow rate and constant heat input. The result indicates that hydrogen addition significantly affects the multi-field synergy, which is advantageous for improving the heat transfer performance and combustion efficiency of biomass syngas. However, when the hydrogen addition ratio exceeds 20% at a constant fuel volume flow rate and 25% at constant heat input, its impact may be reduced. When the hydrogen content increases, the outlet temperature of the combustion chamber decreases, and pollutant emissions are effectively controlled. The turbulent kinetic energy at the reversal section decreases, and the uniformity of the flow field improves. These results provide certain guidance for the efficient utilization of biomass syngas and the operation of boilers burning biomass syngas. [ABSTRACT FROM AUTHOR]

The growing demand from the extended reality and wearable electronics market has led to an increased focus on the development of flexible human-machine interfaces (HMI). These interfaces require efficient user input acquisition modules that can realize touch operation, handwriting input, and motion sensing functions. In this paper, we present a systematic review of triboelectric-based contact localization electronics (TCLE) which play a crucial role in enabling the lightweight and long-endurance designs of flexible HMI. We begin by summarizing the mainstream working principles utilized in the design of TCLE, highlighting their respective strengths and weaknesses. Additionally, we discuss the implementation methods of TCLE in realizing advanced functions such as sliding motion detection, handwriting trajectory detection, and artificial intelligence-based user recognition. Furthermore, we review recent works on the applications of TCLE in HMI devices, which provide valuable insights for guiding the design of application scene-specified TCLE devices. Overall, this review aims to contribute to the advancement and understanding of TCLE, facilitating the development of next-generation HMI for various applications. [ABSTRACT FROM AUTHOR]

Natural gas (NG) engines have very broad application prospects. The pilot-ignited NG diesel engine can be organized into two combustion modes according to the sequence of oil and gas injection: (1) High-pressure direct injection, where NG is mainly diffused combustion; and (2) partially premixed compression ignition, where NG is mainly premixed combustion. In this study, we used CONVERGE to explore the influence of the NG injection timing on the distribution of the mixture equivalence ratio, ignition characteristics, thermal efficiency, emission, and combustion reaction rate under the two combustion modes. We also used a multi-step soot model to analyze the particle mass and quantity. We showed herein that the NG injection timing significantly affects the mixture distribution in the cylinder, thereby consequently affecting the combustion process. Both very early and very late injection times were not conducive to NG combustion. In addition, the mass, quantity, and diameter of the soot produced by diffusion combustion were larger than those produced with premixed combustion. [ABSTRACT FROM AUTHOR]

A fiber-optics tapered sensor that is covered by an electrospinning polyvinyl alcohol (PVA) nanofiber film, is demonstrated to measure humidity and temperature simultaneously. A section multi-mode fiber (MMF) was sandwiched between two leading-in and out single mode fibers (SMFs), which was further tapered down to 29 μm to promote the humidity sensitivity of the sensor. A thin layer of electrospinning PVA nanofiber film was uniformly coated on the MMF taper region by electrospinning technology. In order to promote the humidity sensitivity and mechanical strength of electrospinning nanofibers, the carbon nanotubes (CNTs) were mixed into PVA to formed PVA/CNTs composite nanofiber film. A Fiber Bragg Grating (FBG) was cascaded with the humidity sensing fiber to monitor the ambient temperature simultaneously. The addition of CNTs effectively eliminated the cracks on the electrospinning nanofiber and made it more uniform and smoother. As experimental results show, the humidity sensitivity of the sensor with PVA/CNTs film was 0.0484 dB/%RH, an improvement of 31.16% compared to that of the sensor with PVA film, for which sensitivity is 0.0369 dB/%RH. The nanofiber humidity-sensitive film constructed using electrospinning had a satisfactory humidity response, special 3D structure and extensive application prospect. [ABSTRACT FROM AUTHOR]

The direct injection of natural gas (NG), which is an important research direction in the development of NG engines, has the potential to improve thermal efficiency and emissions. When NG engines operate in low-load conditions, combustion efficiency decreases and hydrocarbon (HC) emissions increase due to lean fuel mixtures and slow flame propagation speeds. The effect of two combustion modes (partially premixed compression ignition (PPCI) and high pressure direct injection (HPDI)) on combustion processes was investigated by CFD (Computational Fluid Dynamics), with a focus on different injection strategies. In the PPCI combustion mode, NG was injected early in the compression stroke and premixed with air, and then the pilot diesel was injected to cause ignition near the top dead center. This combustion mode produced a faster heat release rate, but the HC emissions were higher, and the combustion efficiency was lower. In the HPDI combustion mode, the diesel was injected first and ignited, and then the NG was injected into the flame. This combustion mode resulted in higher emissions of NOx and soot, with a diffusion combustion in the cylinder. HC emissions significantly decreased. Compared with PPCI combustion, HPDI had a higher thermal efficiency. [ABSTRACT FROM AUTHOR]

Herein, wheat straw residue and pulping waste liquid were collected from pulping mill and mixed to prepare bio-based granular fuels by using compression molding technology, and to explore the comprehensive utilization of the industrial waste of pulping and papermaking. The effects of pulping waste liquid on granular fuel properties were analyzed systemically. Further study of the function of pulping waste liquid, cellulose and hemicellulose was used to replace wheat straw residue and avoid the interference factors. Therefore, the prediction models of granular fuels were established with influencing factors that included cellulose, hemicellulose and pulping waste liquid. The granular fuels had the best performance with 18.30% solid content of pulping waste liquid. The highest transverse compressive strength of granular fuel was 102.61 MPa, and the activation energy was 81.71 KJ·mol−1. A series of curve fitting prediction models were established to clarify the forming process of granular fuel, and it turned out that the pulping waste liquid could improve the adhesion between solid particles and increase their compression resistance. [ABSTRACT FROM AUTHOR]

As an in-depth understanding of immunotherapy continues to grow, current anticancer therapy research is increasingly focused on the tumor microenvironment (TME). MicroRNAs (miRNAs) play crucial roles in the regulation of genetic information and expression and mediate interactions between tumor cells and components in the TME, such as tumor-associated macrophages (macrophages). Macrophages are abundant in the TME, and their different polarization directions can promote or inhibit tumor growth and progression. By regulating biological behaviors, such as macrophage recruitment, infiltration, and polarization, miRNAs can affect various molecular pathways to regulate tumor progression and treatment response. In this review, we discuss in detail the effects of macrophages on tumors and the multifaceted effects of miRNAs on macrophages. We also discuss the potential clinical applications and prospects of targeted therapy based on miRNAs, novel clinical biomarkers, and drug delivery systems. [ABSTRACT FROM AUTHOR]

On the basis of 12 years of the European Centre for Mesoscale Weather Forecasts (ECMWF) reanalysis dataset, we statistically analyzed the spatiotemporal distribution of lower atmospheric ducts over the seas around China, and we investigated the possible generation mechanisms. The results show that the ducts' occurrence had obvious seasonal and regional variations. Ducting events were more likely to occur in spring and summer, and the maximum occurrence rate reached 45.6%, which was closely related to the East Asian monsoon. The ducts' altitude in continental coastal areas was lower than that far from the coast due to the dominance of surface ducts. The ducts' thickness varied between 50 m and 450 m, and the thicker ducts were mainly concentrated in the South China Sea and the Pacific Ocean on the east side of the East China Sea near the Philippines and Taiwan. Except for a few areas, the ducts' intensity was less than 10 M-units (an M-unit is the unit of atmospheric modified refractivity) and the diurnal variations were less pronounced. The duct formation in the lower atmosphere was related to factors such as monsoons, tropical cyclones, ocean currents, radiative cooling, and sea–land breezes. [ABSTRACT FROM AUTHOR]

The T cell-dependent bispecific (TDB) antibody, anti-CD79b/CD3, targets CD79b and CD3 cell-surface receptors expressed on B cells and T cells, respectively. Since the anti-CD79b arm of this TDB binds only to human CD79b, a surrogate TDB that binds to cynomolgus monkey CD79b (cyCD79b) was used for preclinical characterization. To evaluate the impact of CD3 binding affinity on the TDB pharmacokinetics (PK), we utilized non-tumor-targeting bispecific anti-gD/CD3 antibodies composed of a low/high CD3 affinity arm along with a monospecific anti-gD arm as controls in monkeys and mice. An integrated PKPD model was developed to characterize PK and pharmacodynamics (PD). This study revealed the impact of CD3 binding affinity on anti-cyCD79b/CD3 PK. The surrogate anti-cyCD79b/CD3 TDB was highly effective in killing CD79b-expressing B cells and exhibited nonlinear PK in monkeys, consistent with target-mediated clearance. A dose-dependent decrease in B cell counts in peripheral blood was observed, as expected. Modeling indicated that anti-cyCD79b/CD3 TDB's rapid and target-mediated clearance may be attributed to faster internalization of CD79b, in addition to enhanced CD3 binding. The model yielded unbiased and precise curve fits. These findings highlight the complex interaction between TDBs and their targets and may be applicable to the development of other biotherapeutics. [ABSTRACT FROM AUTHOR]

Lithium-sulfur (Li-S) batteries have received extensive attention due to their high theoretical specific capacity and theoretical energy density. However, their commercialization is hindered by the shuttle effect caused by the dissolution of lithium polysulfide. To solve this problem, a method is proposed to improve the performance of Li-S batteries using Ti2N(Ti2NS2) with S-functional groups as the sulfur cathode host material. The calculation results show that due to the mutual attraction between Li and S atoms, Ti2NS2 has the moderate adsorption energies for Li2Sx species, which is more advantageous than Ti2NO2 and can effectively inhibit the shuttle effect. Therefore, Ti2NS2 is a potential cathode host material, which is helpful to improve the performance of Li-S batteries. This work provides a reference for the design of high-performance sulfur cathode materials. [ABSTRACT FROM AUTHOR]

Candida albicans, an opportunistic fungus, causes dental caries and contributes to mucosal bacterial dysbiosis leading to a second infection. Furthermore, C.albicans forms biofilms that are resistant to medicinal treatment. To make matters worse, antifungal resistance has spread (albeit slowly) in this species. Thus, it has been imperative to develop novel, antifungal drug compounds. Herein, a peptide was engineered with the sequence of RRFSFWFSFRR-NH2; this was named P19. This novel peptide has been observed to exert disruptive effects on fungal cell membrane physiology. Our results showed that P19 displayed high binding affinity to lipopolysaccharides (LPS), lipoteichoic acids (LTA) and the plasma membrane phosphatidylinositol (PI), phosphatidylserine (PS), cardiolipin, and phosphatidylglycerol (PG), further indicating that the molecular mechanism of P19 was not associated with the receptor recognition, but rather related to competitive interaction with the plasma membrane. In addition, compared with fluconazole and amphotericin B, P19 has been shown to have a lower potential for resistance selection than established antifungal agents. [ABSTRACT FROM AUTHOR]

In this work, a silicon nanopillar array was created with nanosphere lithography. SnO2 film was deposited on this nanostructure by magnetron sputtering to form an SnO2/silicon nanopillar array sensor. The humidity sensitivity, response time, and recovery time were all measured at room temperature (25 °C) with UV or without UV irradiation. As a result, the humidity sensitivity properties were improved by enlarging the specific surface area with ordered nanopillars and irradiating with UV light. These results indicate that nanostructure sensors have potential applications in the field of sensors. [ABSTRACT FROM AUTHOR]