Search

Climate concerns require immediate actions to reduce the global average temperature increase. Renewable electricity and renewable energy-based fuels and chemicals are crucial for progressive de-fossilization. Hydrogen will be part of the solution. The main issues to be considered are the growing market for H2 and the "green" feedstock and energy that should be used to produce H2. The electrolysis of water using surplus renewable energy is considered an important development. Alternative H2 production routes should be using "green" feedstock to replace fossil fuels. We firstly investigated these alternative routes through using bio-based methanol or ethanol or ammonia from digesting agro-industrial or domestic waste. The catalytic conversion of CH4 to C and H2 was examined as a possible option for decarbonizing the natural gas grid. Secondly, water splitting by reversible redox reactions was examined, but using a renewable energy supply was deemed necessary. The application of renewable heat or power was therefore investigated, with a special focus on using concentrated solar tower (CST) technology. We finally assessed valorization data to provide a tentative view of the scale-up potential and economic aspects of the systems and determine the needs for future research and developments. [ABSTRACT FROM AUTHOR]

β-Farnesene is an advanced molecule with promising applications in agriculture, the cosmetics industry, pharmaceuticals, and bioenergy. To supplement the shortcomings of rational design in the development of high-producing β-farnesene strains, a Metabolic Pathway Design-Fermentation Test-Metabolomic Analysis-Target Mining experimental cycle was designed. In this study, by over-adding 20 different amino acids/nucleobases to induce fluctuations in the production of β-farnesene, the changes in intracellular metabolites in the β-farnesene titer-increased group were analyzed using non-targeted metabolomics. Differential metabolites that were detected in each experimental group were selected, and their metabolic pathways were located. Based on these differential metabolites, targeted strain gene editing and culture medium optimization were performed. The overexpression of the coenzyme A synthesis-related gene pantothenate kinase (PanK) and the addition of four mixed water-soluble vitamins in the culture medium increased the β-farnesene titer in the shake flask to 1054.8 mg/L, a 48.5% increase from the initial strain. In the subsequent fed-batch fermentation, the β-farnesene titer further reached 24.6 g/L. This work demonstrates the tremendous application value of metabolomics analysis for the development of industrial recombinant strains and the optimization of fermentation conditions. [ABSTRACT FROM AUTHOR]

Steam flooding is an effective development method for heavy oil reservoirs, and the steam flooding assisted by the profile control system can plug the dominant channels and further improve the recovery factor. High-temperature-resistant foam as a profile control system is a hot research topic, and the key lies in the optimal design of the foam system. In this paper, lignin was modified by sulfonation to obtain a high-temperature-resistant modified lignin named CRF; the foaming agent CX-5 was confirmed to have good high-temperature foaming ability by reducing the surface tension; the formula of the profile control system (A compound system of CRF and CX-5, abbreviated as PCS) and the best application parameters were optimized by the foam resistance factor. Finally, the effect of PCS-assisted steam flooding in enhanced oil recovery was evaluated by single sand packing tube flooding, three parallel tube flooding, and large-scale sand packing model flooding experiments. The results show that CX-5 has a good high-temperature foaming performance; the foam volume can reach more than 180 mL at 300 °C, and the half-life is more than 300 s. The optimal PCS formulation is 0.3 wt% CRF as an oil displacement agent + 0.5 wt% CX-5 as a foaming agent. The optimal gas–liquid ratio range is 1:2 to 2:1, and the high pressure and permeability are more conducive to the generation and stability of the foam. Compared with steam flooding, PCS-assisted steam flooding can improve oil recovery by 9% and 7.9% at 200 °C and 270 °C, respectively. PCS can effectively improve the heterogeneity of the reservoir, and increase the oil recovery of the three-parallel tube flooding experiment by 28.7%. Finally, the displacement results of the sand-packing model with large dimensions show that PCS can also expand the swept volume of the homogeneous model, but the effect is 9.46% worse than that of the heterogeneous model. [ABSTRACT FROM AUTHOR]

Mobile videos contain a large amount of data, where the information interesting to the user can either be discrete or distributed. This paper introduces a method for fusing 3D geographic information systems (GIS) and video image textures. For the dynamic fusion of video in 3DGIS where the position and pose angle of the filming device change moment by moment, it integrates GIS 3D visualization, pose resolution and motion interpolation, and proposes a projection texture mapping method for constructing a dynamic depth camera to achieve dynamic fusion. In this paper, the accuracy and time efficiency of different systems of gradient descent and complementary filtering algorithms are analyzed mainly by quantitative analysis method, and the effect of dynamic fusion is analyzed by the playback delay and rendering frame rate of video on 3DGIS as indicators. The experimental results show that the gradient descent method under the Aerial Attitude Reference System (AHRS) is more suitable for the solution of smartphone attitude, and can control the root mean square error of attitude solution within 2°; the delay of video playback on 3DGIS is within 29 ms, and the rendering frame rate is 34.9 fps, which meets the requirements of the minimum resolution of human eyes. [ABSTRACT FROM AUTHOR]

This study is oriented towards machine autonomous mapping and the need to improve the efficiency of map point symbol recognition and configuration. Therefore, an intelligent recognition method for point symbols was developed using the You Only Look Once Version 3 (YOLOv3) algorithm along with the Convolutional Block Attention Module (CBAM). Then, the recognition results of point symbols were associated with the point of interest (POI) to achieve automatic configuration. To quantitatively analyze the recognition effectiveness of this study algorithm and the comparison algorithm for map point symbols, the recall, precision and mean average precision (mAP) were employed as evaluation metrics. The experimental results indicate that the recognition efficiency of point symbols is enhanced compared to the original YOLOv3 algorithm, and that the mAP is increased by 0.55%. Compared to the Single Shot MultiBox Detector (SSD) algorithm and Faster Region-based Convolutional Neural Network (Faster RCNN) algorithm, the precision, recall rate, and mAP all performed well, achieving 97.06%, 99.72% and 99.50%, respectively. On this basis, the recognized point symbols are associated with POI, and the coordinate of point symbols are assigned through keyword matching and enrich their attribute information. This enables automatic configuration of point symbols and achieves a relatively good effect of map configuration. [ABSTRACT FROM AUTHOR]

The community is the basic spatial unit for urban residents to live and rest. It is a crucial direction of city image research to explore people's cognitive characteristics of community space image. Aiming at the lack of cognitive quantification of community spatial images, a new method that can quantify community spatial data into cognitive results is proposed. By employing spatial analysis tools, eleven spatial indicators from the perspective of community spatial form and spatial services are selected, and an image structure is constructed based on the characteristics of the indicator results. The results of multiple indicators are organized through the improved technique for order preference by similarity to ideal solution (TOPSIS) and overlay analysis method to produce a spatial image map of the community. The study displays that the spatial image characteristics of the community scale can be comprehensively expressed through three types of elements: district, path (edge), and node (landmark). These three types of elements constitute the image structure at the community scale and present apparent elements' characteristics. This scrutiny is also aimed to demonstrate the construction and use process of the methodology and to provide new ideas for the cognitive research of urban spatial image at the community scale. [ABSTRACT FROM AUTHOR]

In order to fully explore the fertilizer use intensity and its potential threats to the ecological environment, this paper has studied the decomposition of fertilizer use intensity and its environmental risk in China’s grain production. Based on the statistical data collected from 10 provinces during 2004–2015 in China’s grain producing areas, this paper has analyzed the effect of fertilizer use intensity from a regional perspective. The environmental risk assessment model considers some factors such as the fertilizer application safety thresholds use efficiency, multiple cropping index, and environmental impact weight. The fertilizer application safety thresholds are calculated on the target output of local food crops. The results show that: (1) during 2004–2015, the fertilizer use intensity shows an increasing trend in China’s grain producing areas, and the intensity is significantly higher than the upper limit of the international safety fertilization; (2) the cumulative contribution rate of the increase of fertilizer use intensity caused by regional fertilizer use efficiency and grain planting structure adjustment are 57.03% and 1.81% respectively; (3) in 2015, China’s grain producing areas’ environmental risk index of phosphorus and potash was low, with the values in these two provinces being quite different and indicating the characteristics of aggregation and distribution. Therefore, the Chinese government should unswervingly encourage the application of some technology that could save fertilizer and increase efficiency, establish environmental risk monitoring and control systems, and improve relevant policies and regulations. [ABSTRACT FROM AUTHOR]

This paper addresses an economic study of the installation of photovoltaic (PV) solar panels for residential power generation in Santiago, Chile, based on the different parameters of a PV system, such as efficiency. As a performance indicator, the Levelized Cost of Energy (LCOE) was used, which indicates the benefit of the facility vs. the current cost of electrical energy. In addition, due to a high level of airborne dusts typically associated with PM10, the effect of the dust deposition on PV panels' surfaces and the effect on panel performance are examined. Two different scenarios are analyzed: on-grid PV plants and off-grid PV plants. [ABSTRACT FROM AUTHOR]

The elastic constants, core width and Peierls stress of 30° partial dislocation in germanium has been investigated based on the first-principles calculations and the improved Peierls–Nabarro model. Our results suggest that the predictions of lattice constant and elastic constants given by LDA are in better agreement with experiment results. While the lattice constant is overestimated at about 2.4% and most elastic constants are underestimated at about 20% by the GGA method. Furthermore, when the applied deformation is larger than 2%, the nonlinear elastic effects should be considered. And with the Lagrangian strains up to 8%, taking into account the third-order terms in the energy expansion is sufficient. Except the original γ —surface generally used before (given by the first-principles calculations directly), the effective γ—surface proposed by Kamimura et al. derived from the original one is also used to study the Peierls stress. The research results show that when the intrinsic−stacking−fault energy (ISFE) is very low relative to the unstable−stacking−fault energy (USFE), the difference between the original γ —surface and the effective γ —surface is inapparent and there is nearly no difference between the results of Peierls stresses calculated from these two kinds of γ —surfaces. As a result, the original γ —surface can be directly used to study the core width and Peierls stress when the ratio of ISFE to the USFE is small. Since the negligence of the discrete effect and the contribution of strain energy to the dislocation energy, the Peierls stress given by the classical Peierls–Nabarro model is about one order of magnitude larger than that given by the improved Peierls–Nabarro model. The result of Peierls stress estimated by the improved Peierls–Nabarro model agrees well with the 2~3 GPa reported in the book of Solid State Physics edited by F. Seitz and D. Turnbull. [ABSTRACT FROM AUTHOR]

The steel industry represents about 7% of the world's anthropogenic CO2 emissions due to the high use of fossil fuels. The CO2-lean direct reduction of iron ore with hydrogen is considered to offer a high potential to reduce CO2 emissions, and this direct reduction of Fe2O3 powder is investigated in this research. The H2 reduction reaction kinetics and fluidization characteristics of fine and cohesive Fe2O3 particles were examined in a vibrated fluidized bed reactor. A smooth bubbling fluidization was achieved. An increase in external force due to vibration slightly increased the pressure drop. The minimum fluidization velocity was nearly independent of the operating temperature. The yield of the direct H2-driven reduction was examined and found to exceed 90%, with a maximum of 98% under the vibration of ~47 Hz with an amplitude of 0.6 mm, and operating temperatures close to 500 °C. Towards the future of direct steel ore reduction, cheap and "green" hydrogen sources need to be developed. H2 can be formed through various techniques with the catalytic decomposition of NH3 (and CH4), methanol and ethanol offering an important potential towards production cost, yield and environmental CO2 emission reductions. [ABSTRACT FROM AUTHOR]

Sulphur dioxide (SO2) is mostly emitted from coal-fueled power plants, from waste incineration, from sulphuric acid manufacturing, from clay brick plants and from treating nonferrous metals. The emission of SO2 needs to be abated. Both wet scrubbing (absorption) and dry or semi-dry (reaction) systems are used. In the dry process, both bubbling and circulating fluidized beds (BFB, CFB) can be used as contactor. Experimental results demonstrate a SO2-removal efficiency in excess of 94% in a CFB application. A general model of the heterogeneous reaction is proposed, combining the external diffusion of SO2 across the gas film, the internal diffusion of SO2 in the porous particles and the reaction as such (irreversible, 1st order). For the reaction of SO2 with a fine particulate reactant, the reaction rate constant and the relevant contact time are the dominant parameters. Application of the model equations reveals that the circulating fluidized bed is the most appropriate technique, where the high solid to gas ratio guarantees a high conversion in a short reaction time. For the CFB operation, the required gas contact time in a CFB at given superficial gas velocities and solids circulation rates will determine the SO2 removal rate. [ABSTRACT FROM AUTHOR]

Measuring chlorophyll fluorescence is a direct and non-destructive way to monitor vegetation. In this paper, the fluorescence retrieval methods from multiple scales, ranging from near the ground to the use of space-borne sensors, are analyzed and summarized in detail. At the leaf-scale, the chlorophyll fluorescence is measured using active and passive technology. Active remote sensing technology uses a fluorimeter to measure the chlorophyll fluorescence, and passive remote sensing technology mainly depends on the sun-induced chlorophyll fluorescence filling in the Fraunhofer lines or oxygen absorptions bands. Based on these retrieval principles, many retrieval methods have been developed, including the radiance-based methods and the reflectance-based methods near the ground, as well as physically and statistically-based methods that make use of satellite data. The advantages and disadvantages of different approaches for sun-induced chlorophyll fluorescence retrieval are compared and the key issues of the current sun-induced chlorophyll fluorescence retrieval algorithms are discussed. Finally, conclusions and key problems are proposed for the future research. [ABSTRACT FROM AUTHOR]