Search

Many countries have some kind of energy-system transformation either planned or ongoing for various reasons, such as to curb carbon emissions or to compensate for the phasing out of nuclear energy. One important component of these transformations is the overall reduction in energy demand. It is generally acknowledged that the domestic sector represents a large share of total energy consumption in many countries. Increased energy efficiency is one factor that reduces energy demand, but behavioral approaches (known as “sufficiency”) and their respective interventions also play important roles. In this paper, we address citizens’ heterogeneity regarding both their current behaviors and their willingness to realize their sufficiency potentials—that is, to reduce their energy consumption through behavioral change. We collaborated with three Swiss cities for this study. A survey conducted in the three cities yielded thematic sets of energy-consumption behavior that various groups of participants rated differently. Using this data, we identified four groups of participants with different patterns of both current behaviors and sufficiency potentials. The paper discusses intervention types and addresses citizens’ heterogeneity and behaviors from a city-based perspective. [ABSTRACT FROM AUTHOR]

Autonomous Vehicles (AV) technology is emerging. Field tests on public roads have been on going in several states in the US as well as in Europe and Asia. During the US public road tests, crashes with AV involved happened, which becomes a concern to the public. Most previous studies on AV safety relied heavily on assessing drivers’ performance and behaviors in a simulation environment and developing automated driving system performance in a closed field environment. However, contributing factors and the mechanism of AV-related crashes have not been comprehensively and quantitatively investigated due to the lack of field AV crash data. By harnessing California’s Report of Traffic Collision Involving an Autonomous Vehicle Database, which includes the AV crash data from 2014 to 2018, this paper investigates by far the most current and complete AV crash database in the US using statistical modeling approaches that involve both ordinal logistic regression and CART classification tree. The quantitative analysis based on ordinal logistic regression and CART models has successfully explored the mechanism of AV-related crash, via both perspectives of crash severity and collision types. Particularly, the CART model reveals and visualize the hierarchical structure of the AV crash mechanism with knowledge of how these traffic, roadway, and environmental contributing factors can lead to crashes of various serveries and collision types. Statistical analysis results indicate that crash severity significantly increases if the AV is responsible for the crash. The highway is identified as the location where severe injuries are likely to happen. AV collision types are affected by whether the vehicle is on automated driving mode, whether the crashes involve pedestrians/cyclists, as well as the roadway environment. The method used in this research provides a proven approach to statistically analyze and understand AV safety issues. And this benefit is potential be even enhanced with an increasing sample size of AV-related crashes records in the future. The comprehensive knowledge obtained ultimately facilitates assessing and improving safety performance of automated vehicles. [ABSTRACT FROM AUTHOR]

Most of the Paleolithic art and ornaments discovered in Romania come from the site of Poiana Cireșului. Four Paleolithic layers have been studied at this site—the oldest one belongs to the Early Gravettian period between 30 ka and 31 ka BP. The ornaments discovered in this layer include perforated shells from three species of mollusks: freshwater Lithoglyphus naticoide and Lithoglyphus apertus as well as Homalopoma sanguineum (an exclusively Mediterranean species). Poiana Cireșului is one of the very few Gravettian sites where perforated Homalopoma sanguineum shells were found, and the importance of this discovery is stressed even more by the very long distance between the site and the nearest source located over 900 km away. This find suggests the connection of communities here with the Mediterranean area as well as a possible movement of populations from the south of the continent to the east of the Carpathians with significant implications in understanding human group mobility and the origin of the Early Gravettian in this area. Furthermore, Poiana Cireșului is the only Gravettian settlement where Lithoglyphus naticoides shells were used. The unique association of perforated shells—not found in any other Gravettian settlement—contributes to the identity of the Paleolithic community of Poiana Cireșului through their ornaments. [ABSTRACT FROM AUTHOR]

Background: The Hopkins Symptom Checklist in 25 items (HSCL-25) helps to assess anxiety and depression in Primary Care. Anxiety and depression show considerable overlap in primary care. This self-administrated questionnaire is valid, reliable and ergonomic in the original US version. We have translated it into French. The aim of this study was to estimate the test characteristics of the HSCL-25, in its French version (F-HSCL-25), by comparing it to the Present State Examination-9 French version (F-PSE-9) and by determining its internal validity and dimensions. Method: Outpatients from three French General Practice settings (rural, semi-rural and urban) were recruited: approximately 20,000 outpatients among 17 GPs. Two groups were formed: F-HSCL-25 ≥1.75 and F-HSCL-25 <1.75. A validated cut-off score of > 1.75 was considered to indicate a clinically relevant level of symptoms of depression and anxiety. In order to obtain two balanced groups, a different method of randomization was chosen for each group. The F-PSE-9 was randomly administered to 1 in 2 patients in the F-HSCL-25 ≥1.75 group, and to 1 in 16 in the (much larger) F-HSCL-25 <1.75 group. The diagnostic performance was assessed and the test results obtained from both groups were compared with their F-PSE-9 results. Results: Of the 1126 patients who completed the F-HCL-25, 886 joined the F-HSCL-25 <1.75 group and 240 the F-HSCL-25 ≥1.75 group. The overall prevalence of depression, using the F-HSCL-25, was 21% in these medical practices. The diagnostic performance of the F-HSCL-25 versus the F-PSE-9, the external criteria were as follows: Positive Predictive Value (PPV) 69.8%, Negative Predictive Value (NPV) 87%; Sensitivity 59.1%, and Specificity 91.4%. The Principal Component Analysis showed that F-HSCL-25 is a one-dimensional tool (anxiety and depression dimensions combined) with a Cronbach Alpha of 0.93. Conclusion: The F-HSCL-25 is an appropriate diagnostic tool for anxiety and depression in primary care in France due to its high specificity and high NPV. The HSCL-25 scale has a high eigenvalue. This pilot study will be extended throughout Europe; however, preliminary evidence suggests that the HSCL-25 is a reliable and suitable diagnostic tool for primary care. [ABSTRACT FROM AUTHOR]

Conventional generators in power grids are steadily substituted with new renewable sources of electric power. The latter are connected to the grid via inverters and as such have little, if any rotational inertia. The resulting reduction of total inertia raises important issues of power grid stability, especially over short-time scales. With the motivation in mind to investigate how inertia reduction influences the transient dynamics following a fault in a large-scale electric power grid, we have constructed a model of the high voltage synchronous grid of continental Europe. To assess grid stability and resilience against disturbance, we numerically investigate frequency deviations as well as rates of change of frequency (RoCoF) following abrupt power losses. The magnitude of RoCoF's and frequency deviations strongly depend on the fault location, and we find the largest effects for faults located on the support of the slowest mode—the Fiedler mode—of the network Laplacian matrix. This mode essentially vanishes over Belgium, Eastern France, Western Germany, northern Italy and Switzerland. Buses inside these regions are only weakly affected by faults occuring outside. Conversely, faults inside these regions have only a local effect and disturb only weakly outside buses. Following this observation, we reduce rotational inertia through three different procedures by either (i) reducing inertia on the Fiedler mode, (ii) reducing inertia homogeneously and (iii) reducing inertia outside the Fiedler mode. We find that procedure (iii) has little effect on disturbance propagation, while procedure (i) leads to the strongest increase of RoCoF and frequency deviations. This shows that, beyond absorbing frequency disturbances following nearby faults, inertia also mitigates frequency disturbances from distant power losses, provided both the fault and the inertia are located on the support of the slowest modes of the grid Laplacian. These results for our model of the European transmission grid are corroborated by numerical investigations on the ERCOT transmission grid. [ABSTRACT FROM AUTHOR]

Background: While health service provisioning for the chronic condition Type 2 Diabetes (T2D) often involves a network of organisations and professionals, most evidence on the relationships between the structures and processes of service provisioning and the outcomes considers single organisations or solo practitioners. Extending Donabedian’s Structure-Process-Outcome (SPO) model, we investigate how differences in quality of life, effective coverage of diabetes, and service satisfaction are associated with differences in the structures, processes, and context of T2D services in six regions in Finland, Germany, Greece, Netherlands, Spain, and UK. Methods: Data collection consisted of: a) systematic modelling of provider network’s structures and processes, and b) a cross-sectional survey of patient reported outcomes and other information. The survey resulted in data from 1459 T2D patients, during 2011–2012. Stepwise linear regression models were used to identify how independent cumulative proportion of variance in quality of life and service satisfaction are related to differences in context, structure and process. The selected context, structure and process variables are based on Donabedian’s SPO model, a service quality research instrument (SERVQUAL), and previous organization and professional level evidence. Additional analysis deepens the possible bidirectional relation between outcomes and processes. Results: The regression models explain 44% of variance in service satisfaction, mostly by structure and process variables (such as human resource use and the SERVQUAL dimensions). The models explained 23% of variance in quality of life between the networks, much of which is related to contextual variables. Our results suggest that effectiveness of A1c control is negatively correlated with process variables such as total hours of care provided per year and cost of services per year. Conclusions: While the selected structure and process variables explain much of the variance in service satisfaction, this is less the case for quality of life. Moreover, it appears that the effect of the clinical outcome A1c control on processes is stronger than the other way around, as poorer control seems to relate to more service use, and higher cost. The standardized operational models used in this research prove to form a basis for expanding the network level evidence base for effective T2D service provisioning. [ABSTRACT FROM AUTHOR]

The burden of disease framework facilitates the assessment of the health impact of diseases through the use of summary measures of population health such as Disability-Adjusted Life Years (DALYs). However, calculating, interpreting and communicating the results of studies using this methodology poses a challenge. The aim of the Burden of Communicable Disease in Europe (BCoDE) project is to summarize the impact of communicable disease in the European Union and European Economic Area Member States (EU/EEA MS). To meet this goal, a user-friendly software tool (BCoDE toolkit), was developed. This stand-alone application, written in C++, is open-access and freely available for download from the website of the European Centre for Disease Prevention and Control (ECDC). With the BCoDE toolkit, one can calculate DALYs by simply entering the age group- and sex-specific number of cases for one or more of selected sets of 32 communicable diseases (CDs) and 6 healthcare associated infections (HAIs). Disease progression models (i.e., outcome trees) for these communicable diseases were created following a thorough literature review of their disease progression pathway. The BCoDE toolkit runs Monte Carlo simulations of the input parameters and provides disease-specific results, including 95% uncertainty intervals, and permits comparisons between the different disease models entered. Results can be displayed as mean and median overall DALYs, DALYs per 100,000 population, and DALYs related to mortality vs. disability. Visualization options summarize complex epidemiological data, with the goal of improving communication and knowledge transfer for decision-making. [ABSTRACT FROM AUTHOR]

After stone removal, accurate analysis of urinary stone composition is the most crucial laboratory diagnostic procedure for the treatment and recurrence prevention in the stone-forming patient. The most common techniques for routine analysis of stones are infrared spectroscopy, X-ray diffraction and chemical analysis. The aim of the present study was to assess the quality of urinary stone analysis of laboratories in Europe. Nine laboratories from eight European countries participated in six quality control surveys for urinary calculi analyses of the Reference Institute for Bioanalytics, Bonn, Germany, between 2010 and 2014. Each participant received the same blinded test samples for stone analysis. A total of 24 samples, comprising pure substances and mixtures of two or three components, were analysed. The evaluation of the quality of the laboratory in the present study was based on the attainment of 75% of the maximum total points, i.e. 99 points. The methods of stone analysis used were infrared spectroscopy (n = 7), chemical analysis (n = 1) and X-ray diffraction (n = 1). In the present study only 56% of the laboratories, four using infrared spectroscopy and one using X-ray diffraction, fulfilled the quality requirements. According to the current standard, chemical analysis is considered to be insufficient for stone analysis, whereas infrared spectroscopy or X-ray diffraction is mandatory. However, the poor results of infrared spectroscopy highlight the importance of equipment, reference spectra and qualification of the staff for an accurate analysis of stone composition. Regular quality control is essential in carrying out routine stone analysis. [ABSTRACT FROM AUTHOR]