4,846 results
Search Results
2. High-performance paper-based biocathode fabricated by screen-printing an improved mesoporous carbon ink and by oriented immobilization of bilirubin oxidase.
- Author
-
Loew, Noya, Shitanda, Isao, Goto, Himeka, Watanabe, Hikari, Mikawa, Tsutomu, Tsujimura, Seiya, and Itagaki, Masayuki
- Subjects
- *
BILIRUBIN oxidase , *CARBOXYMETHYLCELLULOSE , *CHARGE exchange , *INK , *CARBON , *MESOPOROUS materials - Abstract
In this study, the performance of a paper-based, screen-printed biofuel cell with mesoporous MgO-templated carbon (MgOC) electrodes was improved in two steps. First, a small amount of carboxymethyl cellulose (CMC) was added to the MgOC ink. Next, the cathode was modified with bilirubin prior to immobilizing the bilirubin oxidase (BOD). The CMC increased the accessibility of the mesopores of the MgOC, and subsequently, the performance of both the bioanode and biocathode. CMC also likely increased the stability of the electrodes. The pre-modification with bilirubin improved the orientation of the BOD, which facilitated direct electron transfer. With these two steps, an open circuit potential of 0.65 V, a maximal current density of 1.94 mA cm−2, and a maximal power density of 465 μW cm−2 was achieved with lactate oxidase as bioanode enzyme and lactate as fuel. This is one of the highest reported performances for a biofuel cell. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
3. Green supplier selection and order allocation in a low-carbon paper industry: integrated multi-criteria heterogeneous decision-making and multi-objective linear programming approaches.
- Author
-
Govindan, Kannan and Sivakumar, R.
- Subjects
- *
LINEAR programming , *PAPER industry , *GROUP decision making , *GREENHOUSE gases , *TOPSIS method , *METHODOLOGY , *CARBON - Abstract
The low-carbon supply chain is one of the predominant topics towards a green economy and it establishes the opportunity to reduce carbon emissions across the product value chain. This paper focuses on recycling and optimized sourcing in the paper industry as a case company. The main objective is to engage the case company with their supplier networks to diminish the greenhouse gases (GHG) emissions and cost in their production process. It proposes a model to support the selection of the best green supplier and an allocation of order among the potential suppliers. The proposed model contains a two-phase hybrid approach. The first phase presents the rating and selection of potential suppliers by considering economics (cost), operational factors (quality and delivery), and environmental criteria (recycle capability and GHG emission control) using Fuzzy Technique for Order of Preference by Similarity to Ideal Solution (Fuzzy TOPSIS) methodology. The second phase presents the order allocation process using multi-objective linear programming in order to minimize cost, material rejection, late delivery, recycle waste and $$\mathrm{CO}_{2}$$ emissions in the production process. A case study from a paper manufacturing industry is presented to elucidate the effectiveness of the proposed model. The results demonstrate a 26.2 % reduction of carbon emission by using recycle products in the production process. The firm benefits by forming a systematic methodology for green supplier evaluation and order allocation. Finally, a conclusion and a suggested direction of future research are introduced. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
4. A vinyl sulfone clicked carbon dot-engineered microfluidic paper-based analytical device for fluorometric determination of biothiols.
- Author
-
Ortiz-Gomez, Inmaculada, Ortega-Muñoz, Mariano, Marín-Sánchez, Antonio, de Orbe-Payá, Ignacio, Hernandez-Mateo, Fernando, Capitan-Vallvey, Luis Fermin, Santoyo-Gonzalez, Francisco, and Salinas-Castillo, Alfonso
- Subjects
SUBSTITUTION reactions ,DIGITAL cameras ,CARBON ,HYDROXYL group ,DETECTION limit ,CELLULOSE ,NANOCOMPOSITE materials ,THIOLS - Abstract
A microfluidic paper-based analytical device integrating carbon dot (CDs) is fabricated and used for a fluorometric off-on assay of biothiols. Vinyl sulfone (VS) click immobilization of carbon dots (CDs) on paper was accomplished by a one-pot simplified protocol that uses divinyl sulfone (DVS) as a homobifunctional reagent. This reagent mediated both the click oxa-Michael addition to the hydroxyl groups of cellulose and ulterior covalent grafting of the resulting VS paper to NH
2 -functionalized CDs by means of click aza-Michael addition. The resulting cellulose nanocomposite was used to engineer an inexpensive and robust microfluidic paper-based analytical device (μPAD) that is used for a reaction-based off-on fluorometric assay of biothiols (GSH, Cys, and Hcy). The intrinsic blue fluorescence of CDs (with excitation/emission maxima at 365/450 nm) is turned off via the heavy atom effect of an introduced iodo group. Fluorescence is turned on again due to the displacement of iodine by reaction with a biothiol. The increase in fluorescence is related to the concentration over a wide range (1 to 200 μM for GSH and 5–200 μM for Cys and Hcy, respectively), and the assay exhibits a low detection limit (0.3 μM for GSH and Cys and 0.4 μM for Hcy). The method allows for rapid screening and can also be used in combination with a digital camera readout. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
5. Ratiometric fluorescent test pen filled with a mixing ink of carbon dots and CdTe quantum dots for portable assay of silver ion on paper.
- Author
-
You, Junhui, Ji, Jiangrong, Wu, Jiafeng, Wang, Siwan, Chen, Panpan, Mao, Rongchen, Jin, Yang, Zhang, Liying, and Du, Shuhu
- Subjects
- *
SILVER ions , *QUANTUM dots , *QUANTUM dot synthesis , *INK , *DETECTION limit , *PENS , *CARBON - Abstract
A ratiometric fluorescent test pen filled with a mixing ink of blue carbon dots (CDs) and red CdTe quantum dots (CdTe QDs) is introduced for portable assay of silver ion (Ag(I)) on paper. The mixing ink was tuned with ratiometric fluorescent intensity of 1:5, and then filled into a vacant commercial fluorescent pen core. Writing/painting a random word/figure on a blank paper can make the most portable nanoprobe determining Ag(I) by visualization. Ag(I) can adsorb onto the surface of CdTe QDs, which leads to the formation of surficial Ag2Te layer by an ion-exchanging reaction. This enables the red fluorescence of CdTe QDs (with excitation/emission maxima at 360/628 nm) to be quenched. Due to the unchanged blue fluorescence of CDs (with excitation/emission maxima at 360/440 nm) as internal standard, the solution color evolves gradually from red to blue with the increase of Ag(I) concentration with a detection limit of 3.48 nM. This is at least 2 orders of magnitude lower than the limit defined by World Health Organization (WHO) in drinkable water. The fluorescent test pen has also been used for the determination of Ag(I) in wastewater. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
6. Enhancing Oxygen Reduction Reaction Catalytic Performance of Biomass-Derived Carbon Materials by Ultrasonication Treatment.
- Author
-
Zhang, Junjie, Tang, Miao, Sun, Xiannian, Huang, Naibao, Sun, Yin, Guo, Likui, and Wang, Pei
- Subjects
OXYGEN reduction ,SONICATION ,HYDROGEN evolution reactions ,CATALYTIC reduction ,CARBON paper ,CARBON ,POWDERS - Abstract
Biomass-derived carbon materials have been widely studied as oxygen reduction reaction (ORR) catalysts in recent years, and most directly carbonized materials are still inferior to commercial 20% Pt/C in ORR performance. By ball-milling the carbon powder carbonized by yuba, the interior of carbon particles was exposed, which showed that N content inside carbon particles is higher than that on the surface. Then ultrasonication was employed to refresh the surface of the as-obtained carbon particles to increase C-N-active sites to improve their ORR performance. As a result, the as-treated carbon material was comparable to 20% Pt/C as ORR catalyst in all the key ORR activity parameters (only 7 mV and 16 mV negative shift on onset and half-wave potential, respectively, and 0.28 mA cm
−2 at −0.5 V versus Hg/HgO larger in limiting current density). Moreover, the ORR durability and the CO resistance of YUC-850 outperformed that of 20% Pt/C. The detailed experiments indicate that ultrasonication treatment can efficiently exfoliate the small raised material portions of low N content from regular particles to expose more refreshed surface with high N content to improve ORR activity. The subsequent centrifugation collection can remove the small particles to inhibit active site coverage and particle coarsening in service, which leads to further improvement in ORR activity and durability. Ultrasonication of another biomass-derived carbon material also showed significantly improved ORR performance. In conclusion, the application of ultrasonication treatment to biomass-derived carbon materials is proposed to fully promote their ORR activity and durability. The superior ORR performance of the treated carbon materials in this paper also indicates that biomass-derived carbon materials indeed have the potential to serve as redox catalysts in the future. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
7. Facile preparation of floatable high surface area activated carbon monolith from waste printing paper and coal tar pitch.
- Author
-
Ma, Yuhui, Wang, Xunliang, Wang, Wenhua, and Cao, Junrui
- Subjects
ACTIVATED carbon ,PRINTING paper ,SPECTRUM analysis ,RAMAN spectroscopy ,CARBON - Abstract
Abstract: Floatable activated carbon (AC) monoliths were fabricated from waste printing paper (WPP) using a facile method. Coal tar pitch (CTP) and K
2 CO3 were adopted as the additive and activation agent, respectively. The AC monolith was characterized by N2 -adsorption/desorption, Fourier transform infrared spectroscopy and Raman spectroscopy. The adsorption isotherms of methylene blue by the AC monolith were also investigated. The experimental data demonstrated that the product had a high surface area up to 2007 m2 g−1 and a total pore volume of 1.207 cm3 g−1 . The addition of CTP led to a higher mechanical rigidity and the formation of more micropores compared with the single WPP. Also, the AC monolith had a more developed aromatic structure caused by adding CTP. The adsorption equilibrium data followed Langmuir model with a high monolayer adsorption capacity up to 699 mg g−1 . This study provides a reference for the utilization of WPP as a promising precursor of floatable AC monolith, which has the potential to be used as a high-performance and easy-separation adsorbent due to its high surface area and excellent floatability. Graphical abstract:[ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
8. Answer to comments of Dr. Berek on the paper: Veronika Silliková, Jana Jakubčinová, Miroslav Horník, Igor Gomola, Silvia Dulanská, „ Determination of caesium-137 in water samples using modified carbon microfibers ", J. Radioanal. Nuclear Chem. (2022) 331:1275–1284, https://doi.org/10.1007/s10967-022–08212-5
- Author
-
Silliková, Veronika, Jakubčinová, Jana, Horník, Miroslav, Gomola, Igor, and Dulanská, Silvia
- Subjects
- *
MICROFIBERS , *WATER sampling , *WATER use , *MESOPOROUS silica , *CARBON , *PRUSSIAN blue - Abstract
As already mentioned in our article "Hexacyanoferrates (II) belong to an interesting class of sorption materials due to relatively low costs, radiation resistance, high thermal stability, and high selectivity towards cesium [[1]]". Please, let us answer to the comments that Dr. Berek sent in response to our paper. Our results showed that the fibers without impregnation have a small sorption capacity (2 mg Cs SP + sp /L), so in the next step the impregnation was applied to increase it. [Extracted from the article]
- Published
- 2023
- Full Text
- View/download PDF
9. Comments on paper: Veronika Silliková, Jana Jakubčinová, Miroslav Horník, Igor Gomola, Silvia Dulanská, "Determination of caesium-137 in water samples using modified carbon microfibers", J. Radioanal. Nuclear Chem. (2022) 331:1275–1284. https://doi.org/10.1007/s10967-022–08212
- Author
-
Berek, Dušan
- Subjects
- *
MICROFIBERS , *WATER sampling , *WATER use , *CARBON fibers , *CARBON - Abstract
As result a bulk mixture of active substance with CF was created, in which the role on CF may be diminished. The authors of paper used large excess of active substances to modify CF. Authors employed microporous carbon fibers (further CF) prepared in our Laboratory by controlled carbonization of delignified cellulose. [Extracted from the article]
- Published
- 2023
- Full Text
- View/download PDF
10. Fabrication of carbon dots for sequential on–off-on determination of Fe3+ and S2− in solid-phase sensing and anti-counterfeit printing.
- Author
-
Zhao, Huaqi, Jin, Xilang, Zhou, Hongwei, Yang, Zheng, Bai, Haiyan, Yang, Jin, Li, Yulong, Ma, Yiting, and She, Mengyao
- Subjects
FLUORESCENCE yield ,HYDROGELS ,QUANTUM dot synthesis ,FILTER paper ,CELL imaging ,DISTRIBUTION (Probability theory) ,CARBON - Abstract
Glutathione and 2-aminopyridine are used as carbon sources to prepare carbon dots (CDs) by a one-step hydrothermal reaction. The results show that the average particle diameter of CDs is 8.64 nm with uniform size distribution and the fluorescence quantum yield is 13.62%. We further demonstrate that novel CDs possess highly selective sensing of Fe
3+ from 0.2 to 200 μM with a low detection limit (0.194 μM). Meanwhile, the fluorescence of CDs can be repeated many times by the addition of S2− . Moreover, the CDs are used for biological imaging of living cells with well cell penetrability and low toxicity. Furthermore, it is successfully applied for anti-counterfeiting and information encryption. More interestingly, it can be doped with hydrogel and filter paper to prepare solid-phase sensors exhibiting high sensitivity and fast response, demonstrating their tremendous potential for the simple, rapid, and low-cost monitoring of Fe3+ and S2− . [ABSTRACT FROM AUTHOR]- Published
- 2021
- Full Text
- View/download PDF
11. Carbon dynamics of paper, engineered wood products and bamboo in landfills: evidence from reactor studies.
- Author
-
Ximenes, Fabiano A., Kathuria, Amrit, Barlaz, Morton A., and Cowie, Annette L.
- Subjects
CARBON & the environment ,ENGINEERED wood ,PAPER products ,WOOD decay ,METHANE ,GREENHOUSE gases ,LANDFILLS - Abstract
Background: There has been growing interest in the development of waste-specific decay factors for estimation of greenhouse gas emissions from landfills in national greenhouse gas inventories. Although engineered wood products (EWPs) and paper represent a substantial component of the solid waste stream, there is limited information available on their carbon dynamics in landfills. The objective of this study was to determine the extent of carbon loss for EWPs and paper products commonly used in Australia. Experiments were conducted under laboratory conditions designed to simulate optimal anaerobic biodegradation in a landfill.Results: Methane generation rates over incubations of 307-677 days ranged from zero for medium-density fibreboard (MDF) to 326 mL CH
4 g−1 for copy paper. Carbon losses for particleboard and MDF ranged from 0.7 to 1.6%, consistent with previous estimates. Carbon loss for the exterior wall panel product (2.8%) was consistent with the expected value for blackbutt, the main wood type used in its manufacture. Carbon loss for bamboo (11.4%) was significantly higher than for EWPs. Carbon losses for the three types of copy paper tested ranged from 72.4 to 82.5%, and were significantly higher than for cardboard (27.3-43.8%). Cardboard that had been buried in landfill for 20 years had a carbon loss of 27.3%—indicating that environmental conditions in the landfill did not support complete decomposition of the available carbon. Thus carbon losses for paper products as measured in bioreactors clearly overestimate those in actual landfills. Carbon losses, as estimated by gas generation, were on average lower than those derived by mass balance. The low carbon loss for particleboard and MDF is consistent with carbon loss for Australian wood types described in previous studies. A factor for carbon loss for combined EWPs and wood in landfills in Australia of 1.3% and for paper of 48% is proposed.Conclusions: The new suggested combined decay factor for wood and EWPs represents a significant reduction from the current factor used in the Australian greenhouse gas inventory; whereas the suggested decay factor for paper is similar to the current decay factor. Our results improve current understanding of the carbon dynamics of harvested wood products, and allow more refined estimates of methane emissions from landfills. [ABSTRACT FROM AUTHOR]- Published
- 2018
- Full Text
- View/download PDF
12. Preparation of activated carbon paper by modified Hummer's method and application as vanadium redox battery.
- Author
-
Xie, Yiwen, Cheng, Zhiyu, Guo, Bing, Qiu, Yongfu, Fan, Hongbo, Sun, Shoufang, Wu, Tao, Jin, Lei, and Fan, Lu
- Abstract
In this report, the activated carbon papers were prepared by the modified Hummer's method. After the treatment by the modified Hummer's method, the specific surface areas of carbon papers enlarged and the surfaces became wettability. Further, the electrochemical behaviors for the activated carbon papers were measured. They exhibit higher electrochemical activities for VO/VO redox reaction than the unactivated counterparts upon application as vanadium redox battery, which is ascribed to the synergistic effect of surface wettability and catalysis of the docked -OH and -COOH groups. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
13. Yellow Carbon Dots for Fluorescent Water Sensing, Relative Humidity Sensing, and Anticounterfeiting Applications.
- Author
-
Deng, Yafeng, Huang, Shaoyun, Li, Jinli, Zhou, Yihua, and Qian, Jun
- Subjects
HUMIDITY ,FLUORESCENT probes ,WATER use ,CARBON ,FLUORESCENCE - Abstract
Most fluorescent probes based on carbon dots (CDs) fluorescence color or intensity change are still used for detection in solution, but in practical fluorescence detection applications, detection in the solid state is necessary. Therefore, a CDs-based fluorescence sensing device is designed in this paper, which can be used for water detection in liquid and solid states. Using oPD as a single precursor, yellow fluorescent CDs (y-CDs) were prepared by hydrothermal method, which can be used in the field of water detection and anti-counterfeiting by using its solvent-sensitive properties. First, y-CDs can be used to visually and intelligently detect the water content in ethanol. Secondly, it can be used to detect the Relative Humidity (RH) of the environment by combining it with cellulose to form a fluorescent film. Finally, y-CDs can also be used as a fluorescent material for fluorescence anti-counterfeiting. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
14. Does carbon intensity affect technical efficiency? An empirical assessment of manufacturing industries in Maharashtra, Odisha, and India.
- Author
-
Samal, Liza, Tripathy, Prajukta, and Mishra, Bikash Ranjan
- Subjects
MANUFACTURING industries ,DATA envelopment analysis ,CARBON emissions ,CARBON ,BUSINESS size - Abstract
Technical progress has a tremendous potential to reduce carbon dioxide emissions by reducing energy consumption, a major concern across production units. However, the existing empirical literature concerning technical efficiency and carbon intensity is scanty. Thus, this paper examines the relationship between technical efficiency and carbon intensity for the organized manufacturing sector of two states, Maharashtra and Odisha, and the all-India level from 2001 to 2018. The paper uses data envelopment analysis to estimate technical efficiency scores. It applies the 2006 Intergovernmental Panel on Climate Change Tier 1 methodology for estimating carbon intensity for each 3-digit manufacturing industry in all three sample cases. The study has used static panel regression and fractional logit regression techniques to examine the deterministic relationship between technical efficiency and carbon intensity. The result shows that technical efficiency is highly sensitive to carbon intensity in the Indian manufacturing industries. The findings also addressed that the size of the industries also reduces the technical performance of manufacturing units. This paper also confirmed that increased profit could boost the Indian manufacturing industries' technical efficiency. Thus, this study addresses that carbon intensity as a proxy for the manufacturing sector's potential to affect climate change plays a crucial role in explaining the technical efficiency variations across industries. Thus, it calls for better policies aimed at reducing the emissions of industries specifically to achieve sustainable growth for the Indian manufacturing sector. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
15. Yields from Glucose, Xylose, and Paper Sludge Hydrolysate During Hydrogen Production by the Extreme Thermophile Caldicellulosiruptor saccharolyticus.
- Author
-
Zsófia Kádár, Truus de Vrije, Giel E. van Noorden, Miriam A. W. Budde, Zsolt Szengyel, Kati Réczey, and Pieternel A. M. Claassen
- Subjects
GLUCOSE ,HYDROGEN ,CARBON ,INDUSTRIAL wastes - Abstract
This study addressed the utilization of an industrial waste stream, paper sludge, as a renewable cheap feedstock for the fermentative production of hydrogen by the extreme thermophile Caldicellulosiruptor saccharolyticus. Hydrogen, acetate, and lactate were produced in medium in which paper sludge hydrolysate was added as the sole carbon and energy source and in control medium with the same concentration of analytical grade glucose and xylose. The hydrogen yield was dependent on lactate formation and varied between 50 and 94% of the theoretical maximum. The carbon balance in the medium with glucose and xylose was virtually 100%. The carbon balance was not complete in the paper sludge medium because the measurement of biomass was impaired owing to interfering components in the paper sludge hydrolysate. Nevertheless, >85% of the carbon could be accounted for in the products acetate and lactate. The maximal volumetric hydrogen production rate was 5 to 6 mmol/(L·h), which was lower than the production rate in media with glucose, xylose, or a combination of these sugars (9-11 mmol/[L·h]). The reduced hydrogen production rate suggests the presence of inhibiting components in paper sludge hydrolysate. [ABSTRACT FROM AUTHOR]
- Published
- 2004
16. A life cycle and product type based estimator for quantifying the carbon stored in wood products.
- Author
-
Wei, Xinyuan, Zhao, Jianheng, Hayes, Daniel J., Daigneault, Adam, and Zhu, He
- Subjects
WOOD products ,PRODUCT life cycle ,WOOD waste ,MANUFACTURING processes ,LOGGING ,CARBON - Abstract
Background: Timber harvesting and industrial wood processing laterally transfer the carbon stored in forest sectors to wood products creating a wood products carbon pool. The carbon stored in wood products is allocated to end-use wood products (e.g., paper, furniture), landfill, and charcoal. Wood products can store substantial amounts of carbon and contribute to the mitigation of greenhouse effects. Therefore, accurate accounts for the size of wood products carbon pools for different regions are essential to estimating the land-atmosphere carbon exchange by using the bottom-up approach of carbon stock change. Results: To quantify the carbon stored in wood products, we developed a state-of-the-art estimator (Wood Products Carbon Storage Estimator, WPsCS Estimator) that includes the wood products disposal, recycling, and waste wood decomposition processes. The wood products carbon pool in this estimator has three subpools: (1) end-use wood products, (2) landfill, and (3) charcoal carbon. In addition, it has a user-friendly interface, which can be used to easily parameterize and calibrate an estimation. To evaluate its performance, we applied this estimator to account for the carbon stored in wood products made from the timber harvested in Maine, USA, and the carbon storage of wood products consumed in the United States. Conclusion: The WPsCS Estimator can efficiently and easily quantify the carbon stored in harvested wood products for a given region over a specific period, which was demonstrated with two illustrative examples. In addition, WPsCS Estimator has a user-friendly interface, and all parameters can be easily modified. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
17. 13C/12C composition, a novel parameter to study the downward migration of paper sludge in soils.
- Author
-
Lichtfouse, Eric, Rogers, Karyne, Payet, Cécile, and Renat, Jean-Christophe
- Subjects
CHLORINE ,CARBON ,SEWAGE sludge ,FOREST soils ,CARBONATES ,SEWAGE disposal - Abstract
δ
13 C values of crop and forest soils were measured 8 years after disposal of paper sewage sludge. The carbon transfer from paper sludge downward to the first humic layer is evidenced by a13 C-enrichment of up to 15.6% due to the input of13 C-enriched sludge carbonates.13 C/12 C composition is thus a novel, sensitive parameter to follow the downward transfer of paper sludge carbon. [ABSTRACT FROM AUTHOR]- Published
- 2002
- Full Text
- View/download PDF
18. The contribution of the paper cycle to global warming
- Author
-
Subak, S. and Craighill, A.
- Subjects
CLIMATE change ,FOREST products industry ,GREENHOUSE gases ,INDUSTRIAL ecology ,PAPER industry ,NATURAL resources management ,CARBON - Abstract
Worldwide, paper production is a major industry that contributes about 3 percent of Gross World Product. The paper cycle involves a broadrange of natural resource and environmental impacts because fiber supply relies on trees, paper manufacturing requires fuel inputs, and paper waste disposal can contribute to emissions of the potent greenhouse gas (GHG), methane (CH
4 ). In some countries, the papercycle may be seen as a net sink for GHG because of reliance on renewable wood by-products and the maintenance of forest plantations. On aworldwide basis, however, this study demonstrates that the paper cycle is a significant contributor to GHG emissions, adding emissions atleast comparable in magnitude to that of Australia each year. The estimated global warming contribution of paper in landfills is estimated to be similar to that of paper manufacturing processes, on a heating-equivalent basis. In some temperate regions, original old-growth forests are still harvested to supply pulpwood, resulting in a significant loss of carbon (C) storage. In theory, the paper cycle holds the promise of achieving zero net emissions if pulpwood production, consumption and disposal are carefully managed. In practice, even stabilization of emissions at current levels would be challenging and entail changes comparable to a 20 percent reduction in CH4 generation from landfilled paper, and a 2.5 percent annual increase in plantation establishment would be needed to offset the projected increasein emissions from paper manufacturing. [ABSTRACT FROM AUTHOR]- Published
- 1999
- Full Text
- View/download PDF
19. Carbon nanotube nanocomposite-modified paper electrodes for supercapacitor applications
- Author
-
Manisha Vangari, Li Jiang, and N.S. Korivi
- Subjects
business.product_category ,Materials science ,Materials Science (miscellaneous) ,Nanochemistry ,chemistry.chemical_element ,Nanotechnology ,02 engineering and technology ,Carbon nanotube ,010402 general chemistry ,01 natural sciences ,Capacitance ,law.invention ,law ,Carbon paper ,Electrical and Electronic Engineering ,Physical and Theoretical Chemistry ,Composite material ,Supercapacitor ,Nanocomposite ,Cell Biology ,021001 nanoscience & nanotechnology ,Atomic and Molecular Physics, and Optics ,0104 chemical sciences ,chemistry ,Electrode ,0210 nano-technology ,business ,Carbon ,Biotechnology - Abstract
This paper describes the evaluation of carbon paper electrodes for supercapacitor applications. The electrodes are based on carbon micro-fiber paper modified with active material consisting of layers of silver nano-particulate ink and a nanocomposite of multi-walled carbon nanotubes and silver nano-particulate ink. The electrodes were characterized microscopically and electrically. Current–voltage studies revealed a consistent Ohmic behavior of the electrode when modified with different nanostructured active material. Among the active materials incorporated into the electrode, a nanocomposite of carbon nanotubes and silver nano-particulate ink significantly improved capacitance. The paper electrodes can be used for lightweight and ultrathin supercapacitors and other portable energy applications.
- Full Text
- View/download PDF
20. Green location-oriented policies and carbon efficiency: a quasi-natural experiment from National Eco-industrial Demonstration Parks in China.
- Author
-
Liu, Lina, Wang, Haojie, Cui, Xuemin, Liu, Bei, and Jiang, Yiyang
- Subjects
GREEN technology ,CARBON nanofibers ,PROPENSITY score matching ,CARBON emissions ,CITIES & towns ,CARBON - Abstract
This paper investigates how National Eco-industrial Demonstration Parks (NEDP) in China affects carbon emission efficiency. The difference-in-differences (DID) strategy is used for analysis. This paper finds that the construction of NEDP is conducive to the improvement of carbon emission efficiency, and the findings remain robust through placebo tests and propensity score matching. Heterogeneity analysis shows NEDP construction has greater utility on carbon efficiency in non-resource-based cities as well as in environmentally friendly cities. The mechanism analysis found that green technology innovation, industrial restructuring, and the relocation of industrial enterprises are effective ways to improve carbon efficiency in NEDP. Finally, this paper finds that the construction of NEDP has obvious spatial spillover effects on carbon efficiency, which can effectively heighten the carbon efficiency level of this locality and nearby areas. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
21. Spatial characteristics and dynamic differences of power industry's low carbon transition efficiency.
- Author
-
Qin, Chaoyong, Liang, Yizheng, and Cao, Yun
- Subjects
TECHNOLOGICAL progress ,INDUSTRIAL productivity ,ECONOMIC stabilization ,SUSTAINABLE development ,TOBITS ,CARBON ,CARBON steel - Abstract
The power industry's low carbon transition is pivotal for achieving carbon reduction and sustainable development. This study uses the super epsilon-based measurement (Super-EBM) model and the Malmquist index to evaluate the power industry's low carbon transition efficiency using data from 30 provinces in China from 2010 to 2020, and utilizes the Tobit model to comprehensively analyze the factors affecting the low carbon transition of power industry. In addition, this paper examines the spatial differences in the power industry's low carbon transition efficiency as well as its distributional characteristics and dynamic evolutionary patterns. Conclusion is drawn as follows this paper analyzes the regional differences, spatial distribution characteristics and dynamic evolutionary trends of the power industry's low carbon transition. The main conclusions are as follows: (1) The power industry's low carbon transition efficiency in China shows an uptrend, with the western China region having the highest overall level of efficiency, greater fluctuations in the central China region, and more stability in the eastern China region, technological progress is a central factor in increasing total factor productivity, the efficiency of the power industry's low carbon transition is positively influenced by the electricity prices, and negatively influenced by the energy structure, environmental regulations and economic structure; (2) the Intraregional differences and hypervariable density are the main reasons sources of the overall differences in the efficiency of the power industry's low carbon transition; Intraregional differences in the eastern, central, and western China regions are decreasing year by year, but the efficiency of the power industry's low carbon transition in the western China region is still distributed in a multipolar way; (3) The dynamic evolutionary trends of the efficiency distribution of the low carbon transition in power industry is influenced by the type of spatial lag in the neighboring area. Where areas with low efficiency makes it difficult to achieve short-term leapfrog development, and areas with a cluster of high-efficiency provinces are prone to "Siphon Effect". The findings provide a theoretical basis for promoting the efficiency of the power industry's low carbon transition and coordinating the strategic adjustment of economic and environmental green development. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. Use of HMDS/hexane double layers for obtaining low cost selective membrane.
- Author
-
da Silva, Maria Lucia P., Demarquette, Nicole R., and Tan, Ing H.
- Subjects
ALCOHOL ,LIGHT elements ,CARBON ,TETRACHLORIDES ,CARBON tetrachloride ,DOUBLE layers (Astrophysics) ,ELECTRIC double layer - Abstract
Sheets of paper commonly used for filtration were coated with double layers of HMDS (hexamethyl disilazane) and n-hexane using a low pressure plasma reactor. The organic compounds formed a thin film with very good adhesion to the substrate; the process produced water-repellent surfaces, with apparent water-contact angles higher than 1000 and water adsorption around 15 g/m2. The paper porosity was not altered, indicating that the depositions were conformal. Preliminary tests to investigate the possibility of using the modified paper as a se- lective membrane for separation of water and organic-polar and non-polar compounds of different chain length were conducted. The non-polar compounds tested were: n-hexane, cyclohexane, heptane, dodecane, benzene and poly(dimethylsiloxane). The polar organic liquids were ethanol, 2-propanol, carbon tetrachloride, acetophenone and phenol. Three types of behaviour were observed: (a) in the case of water/non-polar mixture, the non-polar compound passed through the modified paper whereas water did not; (b) in the case of acetophenone, phenol and carbon tetrachloride, neither the water nor the polar compound percolated through the modified paper; (c) in the case of water/2-propanol or ethanol solution, it was observed that a minimum concentration of alcohol was necessary in order for both the alcohol and water to percolate through the paper; in this case the alcohol percolates first, followed by water. [ABSTRACT FROM AUTHOR]
- Published
- 2003
23. The promotion mechanism of digital platformization of enterprises for "double carbon" goal: a Chinese case study.
- Author
-
Sheng, Yifan and Cao, Yuequn
- Subjects
DIGITAL technology ,CHINA studies ,CARBON offsetting ,CARBON ,VALUE chains ,ENERGY industries - Abstract
At the 75th United Nations General Assembly, China formally proposed the goals of achieving carbon peak by 2030 and carbon neutrality by 2060, which is referred to as the "double carbon" strategic goal. And energy revolution is the key to achieve this goal. More and more energy enterprises seek to promote the "double carbon" goal through the digital platformization. However, the mechanism of digital platformization promoting the realization of "double carbon" goal is still unclear. Based on the perspective of platform ecosystem and organization structure, this paper deeply analyzes the key intermediary role of energy production mode change and energy trading mode change in energy transformation. This paper also studies the regulatory effect of policy environment, digital platform characteristics, platform leverage, value chain changes, and the ability of digital technology practice and innovatively puts forward the theoretical model. This model reveals the transmission path and internal mechanism of digital platformization of energy companies to promote the realization of dual-carbon goal. Through the established model, this paper analyzes a case that present the commercial digital platformization process developed by Chinese energy company. Such an innovative process in China context has been developed in order to contribute to achieve "double carbon" goals for the future. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
24. Betulinol and wood sterols in sediments contaminated by pulp and paper mill effluents: dissolution and spatial distribution.
- Author
-
Ratia, H., Rämänen, H., Lensu, A., and Oikari, A.
- Subjects
STEROLS ,SEDIMENTS ,SOIL erosion research ,SOIL pollution research ,CARBON - Abstract
The goal was to determine dissolution potency of betulinol and wood sterols (WSs) from pulp and paper mill-contaminated sediments and the current stratification for assessment the load due to potential erosion in the river-like watercourse. Both compounds are wood extractives, which may be toxic to benthos and fish. This research continues a study in which other wood extractives, resin acids and their derivative, retene, were analysed. Sediments were collected from 1, 3.5, 12, 15, and 33 km downstream from the pulp and paper mills, and from 2 upstream reference sites. The dissolution potency into sediment-water elutriates (1 + 4 v/ v) was studied by two agitation times and temperatures. The vertical amounts of extractives were determined from the uppermost 20 cm of sediment. The amounts of extractives potentially released were estimated from the sediment layers 0-2 and 2-5 cm by using spatial interpolation. According to the interpolation, the total amount of betulinol and β-sitosterol was calculated as kg/ha in the whole sediment area. Significant concentrations of betulinol (1,666 μg/g, dw) and WSs (2,886 μg/g, dw) were measured from the sediments. According spatial interpolation, the highest calculated amount of betulinol (4,726 kg/ha) and that of the most abundant WS, β-sitosterol (3,571 kg/ha), were in the lake where the effluents were discharged. In the dissolution experiment, the highest concentration of betulinol in sediment (0-10 cm) and elutriate was 412 μg/g (dw) and 165 μg/l, respectively. For WSs, concentrations were 768 μg/g (dw) in sediment and 273 μg/l in elutriate. In a worst-case scenario, betulinol may be desorbed to water in concentrations which are hazardous to aquatic animals. Instead WSs are not a risk in this study area. The amount of desorption varied depending on the concentration of contaminants in sediment, the nature of disturbance, and the sediment organic carbon content. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
25. Research on influencing factors of carbon information disclosure quality in China's power industry.
- Author
-
Liu, Zhibin and Cheng, Qiang
- Subjects
DISCLOSURE ,BUSINESS size ,CHANGE theory ,CARBON ,VALUE orientations ,ANALYTIC hierarchy process ,INFORMATION theory in economics - Abstract
High-quality carbon information disclosure is required with the development of China's national carbon emission trading market. It is still controversial what factors influence carbon information disclosure quality in China's power industry. This paper involved four factors: government regulation, media reports, enterprise size, and directors' professional backgrounds based on strategic change theory. The carbon information disclosure quality was measured using the analytic hierarchy process (APH) and entropy weight method (EWM). Then, panel data regression was used to analyze the relationship between the factors and carbon information disclosure quality. The results showed that (1) the quantity of media reports has no significant correlation with carbon information disclosure quality. (2) The proportion of directors with legal backgrounds to all directors is significantly and negatively correlated with carbon information disclosure quality. (3) Government regulation, the media value orientation, enterprise size, and the proportion of directors with accounting backgrounds to all directors are significantly and positively related to the carbon information disclosure quality. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
26. Study of the durability and sustainability of fluorescent nanosensors based on cellulose nanocomposites incorporated with various carbon dots.
- Author
-
Rahmandoust, Moones, Sharifikolouei, Elham, Lassnig, Alice, and Zoghi, Sepideh
- Subjects
NANOSENSORS ,DURABILITY ,QUANTUM dots ,SUSTAINABILITY ,NANOCOMPOSITE materials ,CHEMICAL structure ,CARBON - Abstract
Paper-based analytical devices are promising options for lab-on-chip and other biodetection applications. Among various nanomaterials, carbon quantum dots (CQDs) are famous for their significant and stable photoluminescence (PL) properties, as well as their fast and cost-effective gram-scale synthesis techniques. However, studies on the durability and sustainability of their performance as fluorescent composites are very limited and not systematic. Therefore in this investigation, the PL emission intensity of cellulose papers containing various types of CQDs, including pure, N-, S-, P-, N/S-, and N/P-doped CQDs, were studied over two months, at three different storage temperatures, namely, 4 °C, 10 °C, and 25 °C, and four pH settings as to be 5, 6, 7 and 8. The results show that the environmental keeping conditions, as well as the chemical structure of the embedded CQDs, have significant impacts on the durability and sustainability of the produced sensors. All the fluorescent composites investigated in this study proved to have very high performances, sustaining from above 60–90% of their PL emission intensities over time. Although 4 °C is proved to be generally the best keeping temperature for all the fluorescent nanocomposites, the best pH, in which the PL is most sustained, depends strongly on the chemical nature of the embedded CQDs. The CQDs/cellulose composites were kept for additional longer durations, above six months, in their best keeping conditions, and their performance was checked, showing the reliability of the proposed setup for further industrial promising applications. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
27. Dermal exposure assessment to benzene and toluene using charcoal cloth pads.
- Author
-
van Wendel de Joode, Berna, Tielemans, Erik, Vermeulen, Roel, Wegh, Hillion, and Kromhout, Hans
- Subjects
- *
TOLUENE , *PAPER chemicals , *CARBON , *JOB classification , *URINE , *NONAQUEOUS solvents - Abstract
Charcoal cloth pads have been used to assess volatile chemicals on the skin in a laboratory setting; however, they have not yet been applied to measure dermal exposure in occupational settings. This study aimed at evaluating whether charcoal pads can be used to assess dermal exposure to benzene and toluene in workers of a petrochemical plant. Inhalation and dermal exposure levels to benzene and toluene were assessed for workers of a petrochemical plant performing different jobs. Benzene uptake was assessed by determining S-phenylmercapturic acid in workers'urine samples. Dermal exposure levels on the charcoal pads were adjusted for ambient air levels of benzene and toluene by subtracting the amount of benzene or toluene measured in personal air from the amount of benzene or toluene measured on the charcoal pad. In general, measured external and internal exposure levels were low. The estimated contribution of the dermal route to internal benzene exposure levels was less than 0.06%for all jobs. Toluene personal air concentrations and benzene and toluene dermal exposure levels differed statistically significantly between job titles. For benzene, differences between jobs were larger for adjusted dermal exposures (maximum 17-fold, P=0.02) than for inhalation exposures (maximum two-fold, P=0.08). Also for toluene, although less clear, differences between jobs were larger for adjusted dermal exposures (maximum 23-fold, P=0.01) as compared to inhalation exposures (maximum 10-fold, P=0.01). Charcoal pads appeared to measure dermal exposures to benzene and toluene in addition to ambient air levels. Future studies applying charcoal cloth pads for the dermal exposure assessment at workplaces with higher dermal exposure to organic solvents may provide more insight into the biological relevance of dermal exposure levels measured by charcoal cloth pads. In addition, the design of the dermal sampler might be improved by configuring a dermal sampler, where part of the sampler is protected against direct contact and splashes, but still permeable for the gas phase. This design would most likely result in a better ability to correct for airborne concentrations at a given body location.Journal of Exposure Analysis and Environmental Epidemiology (2005) 15, 47-50. doi:10.1038/sj.jea.7500349 Published online 14 April 2004 [ABSTRACT FROM AUTHOR]
- Published
- 2005
- Full Text
- View/download PDF
28. The case for carbon leakage and border adjustments: where do economists stand?
- Author
-
Cameron, Aliénor and Baudry, Marc
- Subjects
LITERATURE reviews ,LITERATURE competitions ,LEAKAGE ,CARBON ,ECONOMIC policy - Abstract
While the EU is working toward the implementation of the world's first Carbon Border Adjustment (CBA) Mechanism, a gap remains between the ways in which carbon leakage and CBAs are discussed in policy spheres and economic evidence on these topics. The aim of this paper is to bridge this gap by presenting the EU's policy context, systematically reviewing the economic literature on carbon leakage and CBAs, and discussing potential future research avenues. Three channels of leakage are identified in our literature review: the competition, energy and innovation channels. The main finding of this paper is that while the competition channel is well understood and taken into account by policymakers, the energy and innovation channels are generally not considered. Policy recommendations are provided to better account for these two channels. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
29. Has China's carbon market stress released? Measurement and comparison of national and pilot carbon markets' stress.
- Author
-
He, Lingyun, He, Huibin, Xia, Yufei, Chen, Ling, and Zhong, Zhangqi
- Subjects
CARBON nanofibers ,GREENHOUSE gas mitigation ,CARBON ,FUNCTIONAL analysis ,EMISSIONS trading ,CARBON offsetting - Abstract
This paper constructs a novel stress measurement system of carbon market from the perspective of trading, emission reduction, and external shocks and simulates the stress indices of national and pilot carbon markets of China with the methods of functional data analysis and criteria importance through intercriteria correlation. It concludes that the overall carbon market stress is in the shape of "W" and still at a high level, with frequent fluctuations and an upward trend. In addition, the stress of Hubei, Beijing, and Shanghai carbon market fluctuates and rises, while the stress of Guangdong carbon market decreases. Moreover, carbon market stress mainly comes from trading and emission reduction. Furthermore, stress fluctuation of Guangdong and Beijing carbon market is more prone to "big waves," indicating that the two markets are sensitive to big events. Finally, the pilot carbon markets are divided into stress-driven and stress-release market and the type of which keeps change in different period. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
30. Nanoscale modeling of an efficient Carbon Nanotube-based RF switch using XG-Boost machine learning algorithm.
- Author
-
Chaitanya, Pranav, Sethuraman, S., Kanthamani, S., and Roomi, S. Mohamed Mansoor
- Subjects
MACHINE learning ,MILLIMETER waves ,RADIO frequency ,NANOELECTROMECHANICAL systems ,CARBON ,CARBON nanotubes - Abstract
Radio Frequency (RF) Nano Electro Mechanical Switches (NEMS) using Carbon Nanotube (CNTs) are preferred for electronic switching due to its high stiffness, switching speeds and ultra-low mass over several GHz range. CNT switch for microwave and millimeter wave applications utilizing a maximum of three CNTs with fixed starting positions of CNTs from zero level offset to obtain better isolation (S
21 ) of the switch in DOWN State has already been studied. The motive of this paper is to obtain better RF performance in terms of return loss (S11 ) and isolation loss by modelling the switch in DOWN-state by varying the random positioning of CNTs, interelement spacing between CNTs, number of CNTs and frequency is predicted and reported using XG—Boost approach. Time-consuming optimization methods to predict the S-parameters in customized Electromagnetic (EM) simulators such as HFSS (High Frequency Structure Simulator) have been resolved using the proposed XG-Boost regression approach. In this paper, the proposed XG-Boost approach minimizes the switch design time with random placement of CNTs by 99.81% compared to the conventional EM simulator which requires about 120 h for 400 simulations in an Intel-Core processor (2.50 GHz) with 8 GB RAM. To validate the results, they are compared to the HFSS model, and a high degree of agreement is found. Mean Square Error (MSE) of the switch in the DOWN- state after comparing the EM simulation values and XG-Boost regression values is 6.832e−03 . [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
31. Acquirers' carbon risk, environmental regulation, and cross-border mergers and acquisitions: evidence from China.
- Author
-
Guo, Jianquan and Cheng, He
- Subjects
MERGERS & acquisitions ,ENVIRONMENTAL regulations ,CARBON ,DEVELOPED countries ,ECONOMIC expansion ,LOGISTIC regression analysis - Abstract
In this paper, we aim to analyze the behavior of developed-country acquiring firms in dealing with Cross-Border Mergers and Acquisitions location choices at both national and sub-national levels with the impact of carbon risk and heterogeneous environmental regulations (Government, Civil, and Market Environmental regulations) and to explore their Cross-Border Mergers and Acquisitions performances under different situations. A sample of 874 intra-manufacturing Cross-Border Mergers and Acquisitions completed by developed-country acquirers and conducted in developed countries and China during 2002–2021 was analyzed using logistic regression and multiple linear regression. The results show that: (1) Acquirers with higher carbon risks tend to choose China rather developed country as the target location, while this relationship is not strengthened by the home country's high-level environmental regulations; (2) At the sub-national level, Chinese provinces' government environmental regulations cannot impede acquirers to enter; what's more, the civil environmental regulations even attract these acquirers, this is particularly the case if the acquirer has high carbon risk; (3) Acquirers with higher carbon risks can achieve more performance, no matter whether they choose China as the target country. Our findings add insight into the effect of carbon risks on companies' decisions and the unique characteristics of the heterogeneous environmental regulations in China. What's more, implications are provided for Chinese regulators and policymakers, e.g., listening to the public opinion, improving the governance quality, and attracting foreign investors to help domestic industry upgrading and maintain long-run economic growth. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
32. A Method Countries Can Use to Estimate Changes in Carbon Stored in Harvested Wood Products and the Uncertainty of Such Estimates.
- Author
-
Skog, Kenneth E., Pingoud, Kim, and Smith, James E.
- Subjects
CARBON ,WOOD products ,HAZARDOUS wastes ,WASTE disposal sites ,BIOMASS - Abstract
A method is suggested for estimating additions to carbon stored in harvested wood products (HWP) and for evaluating uncertainty. The method uses data on HWP production and trade from several decades and tracks annual additions to pools of HWP in use, removals from use, additions to solid waste disposal sites (SWDS), and decay from SWDS. The method is consistent with IPCC guidance for estimating emissions from SWDS. Uncertainty is postulated in the form of probability density functions for 14 variables, using Monte Carlo simulation. Results for the United States suggest that uncertainty is most sensitive to uncertainty in production data for solidwood products, the factor used to convert products to carbon, and the proportion of solidwood and paper in SWDS. Uncertainty in the use (service) life of solidwood products has a limited effect because an error offsets changes in products in use and in SWDS. The method provides a starting point for meeting the aims of the IPCC Good Practice Guidance. [ABSTRACT FROM AUTHOR]
- Published
- 2004
- Full Text
- View/download PDF
33. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *PHYSICAL sciences , *CARBON , *HEAT resistant alloys , *METAL coating , *ALUMINUM phosphide - Abstract
This article presents the list of papers reviewed of the volume 37, 38 and 39, published in the January 10, 2004 issue of "Journal of Materials Science." Some of the headings of the papers of different volumes, reviewed are: "Structure and Properties of Glass-Like Carbon," by L.A. Pesin; Progress in Ostwald Ripening Theories and Their Applications to Nickel-Base Superalloys Part I," by A. Baldan; "Environmentally Friendly Coatings Using Carbon Dioxide As the Carrier Medium," by J.N. Hay and A. Khan; and "Acid Aluminum Phosphate for the Binding and Coating of Materials," by D.D.L. Chung.
- Published
- 2004
- Full Text
- View/download PDF
34. Study of torsional strain effect on dynamic behavior of carbon nanotube thermal actuator.
- Author
-
Huang, Jianzhang, Fan, Yue, Guo, Yalan, and Liang, Yingjing
- Subjects
MOLECULAR dynamics ,ACTUATORS ,THERMAL strain ,CARBON ,MOLECULAR communication (Telecommunication) ,PAPER arts - Abstract
In this paper, a regulation method through torsional strain effect is proposed for carbon nanotube linear thermal actuators. The effects of torsional strain effect on the linear driven performance of linear actuators are systematically studied by molecular dynamics method, and the effect mechanism is revealed as well. It was found that the torsional strain affects the thermal driving force and the friction effect by changing the spacing between the carbon tubes and lattice vibration modes, then further affects the linear driving characteristics. The influence mechanism of torsional strain on the driving characteristics is analyzed and the valuable conclusions for nanoscale strain engineering application are obtained. The work of this paper provides a new idea for performance regulation for nano-driving by using strain effect, and has important guiding significance for nanoscale strain engineering. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
35. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *CARBON , *NANOWIRES , *SCANNING electron microscopes , *CRYSTALLOGRAPHY , *ICE - Abstract
Presents review papers published in volumes 37, 38 and 39 of "Journal of Materials Science." Structure and properties of glass-like carbon; Electron backscatter Kikuchi diffraction in the scanning electron microscope for crystallographic analysis; Synthesis of conducting nanowires; Mechanical properties of ice and snow; Electrooptic and ferroelectric properties of barium sodium niobate single crystals.
- Published
- 2004
- Full Text
- View/download PDF
36. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *CARBON , *SILICA fume , *CEMENT , *ICE mechanics , *SNOW mechanics - Abstract
Lists several review papers published in the "Journal of Materials Science," Volume 37, 38 and 39. "Structure and properties of glass-like carbon," by L.A. Pesin; "Improving cement-based materials by using silica fume," by D.D.L. Chung; "Mechanical properties of ice and snow," by J.J. Petrovic; "Stability of nanostructured materials," b y R.A. Andrievski.
- Published
- 2004
- Full Text
- View/download PDF
37. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *PERIODICALS , *CARBON , *GLASS , *CEMENT composites , *SILICA fume - Abstract
Lists papers reviewed in volumes 37, 38 and 39 of the "Journal of Materials Science." "Structure and properties of glass-like carbon," by L. A. Pesin; "Improving cement-based materials by using silica fume," by D. D. L. Chung; "Progress in Ostwald ripening theories and their applications to nickel-based superalloys," by A. Baldan.
- Published
- 2004
- Full Text
- View/download PDF
38. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *SILICA fume , *SILICON , *HEAT resistant alloys , *CARBON , *LIGHT elements - Abstract
Lists several review papers which was published in the Volume 37, 38 and 39 of the "Journal of Materials Science." "Structure and properties of glass-like carbon," by L.A. Pesin; "Improving cement-based materials by using silica fume," by D.D.L. Chung; "Progress in Ostwald ripening theories and their applications to nickel-base superalloys," by A. Baldan.
- Published
- 2004
- Full Text
- View/download PDF
39. Review papers in Journal of Materials Science Volumes 37, 38 and 39.
- Subjects
- *
MATERIALS science , *PERIODICALS , *CARBON , *NANOSTRUCTURED materials , *ISOTOPES , *SOLIDS - Abstract
Lists review papers in the "Journal of Materials Science" volumes 37, 38 and 39. Structure and properties of glass-like carbon; Stability of nanostructure materials; Applications of isotope effects in solids.
- Published
- 2004
- Full Text
- View/download PDF
40. The MedAustron particle therapy accelerator facility.
- Author
-
Pivi, Mauro T. F.
- Abstract
Purpose: MedAustron mission is to cure cancer by providing advanced patient care, clinical trials, applied and basic research, and know-how transfer. The facility is constantly striving to improve the therapy method of ion beam therapy, to increase its effectiveness and to make the treatment accessible to more people. Methods: The MedAustron particle therapy accelerator facility is located in Austria and delivers protons in the energy range 60–250 MeV and carbon ions 120–400 MeV/n for tumor treatment to four irradiation rooms. Clinical treatment includes two rooms with fixed beam lines horizontal and horizontal/vertical and a third room with a rotating beam line, the proton gantry. A fourth irradiation room is dedicated to research delivering carbon and helium beams and where proton beams up to 800 MeV are also provided. Results: The facility has been built, the commissioning has been completed and MedAustron is now successfully operating at its full functionality. Since the first patient treatment in December 2016, more than 2,000 patients have been treated at MedAustron. Conclusions: In this paper, we provide an overview of the facility including the world-wide first so-called rotator system used, synchronously with the gantry, to improve the quality of the beam delivered at the patient. Furthermore, we discuss about the ongoing projects for improvement of the facility, the areas of research and potential topics for collaboration. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. Multifunctional carbon materials from rugose rose for energy storage and water purification.
- Author
-
Li, Peng-Hui, Zhou, Hui, and Wu, Wen-Juan
- Abstract
With the advancement of social process, the resource problem is becoming more prominent, biomass materials come into being, and it is becoming more and more important to explore and prepare efficient and multifunctional biomass materials to alleviate the problems of energy storage and water pollution. In this paper, nitrogen-doped hierarchical porous carbon materials (NRRC) were produced by one-step carbonization of withered rose as raw material and melamine as nitrogen source with KOH-activated porosification. The resulting nitrogen-doped porous carbon material had the most abundant pores and the best microspherical graded pore structure, with a specific surface area of up to 1393 m
2 ·g−1 , a pore volume of 0.68 cm3 ·g−1 , and a nitrogen-doped content of 5.52%. Electrochemical tests showed that the maximum specific capacitance of NRRC in the three-electrode system was 346.4 F·g−1 (0.5 A·g−1 ), which was combined with favorable capacitance retention performance and cycling stability. The NRRC//NRRC symmetric supercapacitors were further assembled, and the maximum energy density of a single device was 23.88 Wh·kg−1 , which still maintains excellent capacitance retention and cyclic charging/discharging stability. For example, the capacitance retention rate was always close to 96.27% with almost negligible capacitance loss after 10000 consecutive charge/discharge cycles (current density: 10 A·g−1 ). Regardless of the three-electrode or two-electrode system, the super capacitive performance of NRRC porous carbon materials was comparable to the electrochemical performance of many reported biomass porous carbon materials, which showed better energy storage advantages and practical application potential. In addition, NRRC porous carbon materials had excellent water purification ability. The dye adsorption test confirmed that NRRC had a high adsorption capacity (491.47 mg·g−1 ) for methylene blue. This undoubtedly also showed a potential and promising avenue for high value-added utilization of this material. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
42. Assessing the contribution of optimizing energy mix to China's carbon peaking.
- Author
-
Wang, Feng, Han, Huadan, Liu, Liang, and Zhao, Jingfei
- Subjects
CARBON emissions ,MARKOV processes ,CARBON ,ECONOMIC impact ,ECONOMIC expansion - Abstract
To cope with climate change, China commits that it will strive to achieve carbon peaking by 2030. Using the Cointegration model and the Markov Chain model, this paper forecasts China's carbon emissions during 2019–2030 in six scenarios, and assesses the contribution of optimizing the energy mix to China's carbon peaking. The research obtains three main conclusions. Firstly, optimizing the energy mix will contribute to achieving China's carbon peaking. In the economic slow-growth scenario, taking China's planned target of energy mix (PTEM) into account, the carbon peaking year will be brought forward from 2028 to 2023. In the economic medium-speed-growth scenario, optimizing the energy mix will make China achieve carbon peaking in 2028. Without considering the PTEM, however, the carbon emissions will not peak before 2030. In the economic fast-growth scenario, the peaking year will not occur whether considering the PTEM or not, but the growth rate of carbon emissions with the PTEM will be far lower than that without considering the PTEM. Secondly, in all three economic growth scenarios, optimizing the energy mix will largely reduce the growth rate of carbon emissions, and thus significantly reduce the peak value of carbon emissions. Thirdly, optimizing the energy mix has a negative adjusting effect on the impact of economic growth on the growth rate of carbon emissions, and the negative effect rise as the economic growth rate increases. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
43. Innovating from the ground up: the impact of key technological advancements on collaborative carbon and haze governance.
- Author
-
Tian, Jiali, Fu, Siyu, Peng, Jiachao, Fu, Shuke, and Chen, Shaofeng
- Subjects
TECHNOLOGICAL innovations ,HAZE ,CARBON nanofibers ,TECHNOLOGICAL progress ,CARBON offsetting ,SUSTAINABLE development ,CARBON - Abstract
Strengthening the synergistic management of carbon and haze is an important means to realize China's "carbon peaking and carbon neutrality goals" and green development. In this paper, the entropy method is used to measure the key core technology innovation level of 30 provinces in China from 2011 to 2021, and the fixed-effect model is used to empirically test the impact of key core technology innovation on carbon haze synergistic governance and the internal mechanism. The study found that (1) key core technological innovation helps to promote carbon haze synergistic governance. (2) The mechanism test shows that key core technology innovation promotes the synergistic management of carbon haze by improving the clean energy structure. (3) The moderating effect shows that both market incentives and government environmental regulations will strengthen the positive relationship between key core technology innovation and carbon haze synergistic governance. The main contribution of this paper is to reveal the influence mechanism of key core technology innovation on carbon haze synergistic governance, and also to provide theoretical basis for the mechanism and law of carbon haze synergistic governance. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
44. Towards synergy: network facility development, whole process carbon reduction and pollution reduction, and regional disparities.
- Author
-
Zhang, Xuefeng, Sun, Hui, Xia, Xuechao, Yang, Zedong, and Zhu, Shusen
- Subjects
REGIONAL disparities ,REGIONAL economic disparities ,POLLUTION ,CARBON ,TREATMENT effect heterogeneity ,PANEL analysis - Abstract
The in-depth implementation of the "Broadband China Strategy" is of great significance in promoting the synergistic governance of urban carbon reduction and pollution reduction. In this paper, based on the "Broadband China" pilot program implemented in China in 2014 as a quasi-natural experiment, the coupled synergy model is used to measure the carbon and pollution reduction synergy index based on the balanced panel data of 277 prefectural-level cities and above in China from 2006 to 2020, and the staggered and synthetic DID methods are applied to investigate the impact of the Broadband China strategy on carbon and pollution reduction synergy and its mechanism. strategy on carbon and pollution reduction synergy and its mechanism. The conclusions of the study show that (1) the Broadband China strategy significantly improves the synergistic governance of carbon reduction and pollution reduction. (2) The mechanism results show that Broadband China mainly realizes carbon and pollution synergistic governance by promoting source control and process innovation but does not have an effective mediating role in end-of-pipe treatment. (3) The results of heterogeneity analysis show that Broadband China weakens the traditional geographic advantage, narrows the carbon pollution synergistic governance gap at the national and regional levels, and significantly improves the regional carbon reduction and pollution reduction governance level. This paper examines the micro-mechanism of the Broadband China strategy on carbon pollution synergistic governance from the whole process of production activities, which provides a new perspective for the study of carbon pollution synergistic governance, and provides an empirical basis for carbon pollution synergistic governance in China. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
45. Review of tribological properties of nanoparticle-based lubricants and their hybrids and composites.
- Author
-
Htwe, Ye Zar Ni, Al-Janabi, Aws. S., Wadzer, Yasmin, and Mamat, Hussin
- Subjects
METALLIC oxides ,TRIBOLOGY ,BASE oils ,LUBRICANT additives - Abstract
Due to their encouraging results, nanolubricants have been revolutionary in the field of lubrication. The degree, to which the new material may improve the tribology, energy savings, and durability, is a crucial consideration for any new additive to a conventional lubricant. The results of the earlier research on carbon, metal, metal oxide, and their composites and hybrid nanolubricants as well as their effects on tribology, are summarized in this review paper. The most popular measuring methodologies, the tribology results for lubricants with an oil base, biodegradable base, and a water base, as well as the reasons that explain these tribological advancements, are all included in this study. Finally, prospects for more study in this area are emphasized. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
46. Selective adsorption of Cr(VI) by nitrogen-doped hydrothermal carbon in binary system.
- Author
-
Jia, Zuoyu, Liang, Fengkai, Wang, Fang, Zhou, Haifeng, and Liang, Peng
- Abstract
Selective adsorption of heavy metal ions from industrial effluent is important for healthy ecosystem development. However, the selective adsorption of heavy metal pollutants by biochar using lignin as raw material is still a challenge. In this paper, the lignin carbon material (N-BLC) was synthesized by a one-step hydrothermal carbonization method using paper black liquor (BL) as raw material and triethylene diamine (TEDA) as nitrogen source. N-BLC (2:1) showed excellent selectivity for Cr(VI) in the binary system, and the adsorption amounts of Cr(VI) in the binary system were all greater than 150 mg/g, but the adsorption amounts of Ca(II), Mg(II), and Zn(II) were only 19.3, 25.5, and 6.3 mg/g, respectively. The separation factor (SF) for Cr(VI) adsorption was as high as 120.0. Meanwhile, FTIR, elemental analysis and XPS proved that the surface of N-BLC (2:1) contained many N– and O– containing groups which were favorable for the removal of Cr(VI). The adsorption of N-BLC (2:1) followed the Langmuir model and its maximum theoretical adsorption amount was 618.4 mg/g. After 5th recycling, the adsorption amount of Cr(VI) by N-BLC (2:1) decreased about 15%, showing a good regeneration ability. Therefore, N-BLC (2:1) is a highly efficient, selective and reusable Cr(VI) adsorbent with wide application prospects. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
47. Can industrial structure optimization and industrial structure transition both lead to carbon lock-in mitigation? The case of China.
- Author
-
Zhao, Congyu
- Subjects
LEAD ,CARBON nanofibers ,GENERALIZED method of moments ,TECHNOLOGICAL innovations ,CARBON ,CITIES & towns - Abstract
The optimization and transition of the industrial structure help improve the quality of the economy, moving it toward low-carbon development. By using the Instrumental Variable Generalized Method of Moments model and a city-level dataset covering the period 2006–2019, this paper explores the carbon lock-in mitigation effects of industrial structure optimization and industrial structure transition, respectively. The heterogeneity and the synthetic industrial structure adjustment effect are detected, and the potential impact mechanism is also explored. Some findings have been generated. (1) Both industrial structure optimization and industrial structure transition realize carbon lock-in eradication. (2) Industrial structure optimization and transition are more effective in inhibiting carbon lock-in in cities with a higher level of economic background. (3) By generating an interaction term of industrial structure optimization and transition and examining the impact of the interaction term on carbon lock-in, this paper detects that industrial structure optimization and transition have a synthetic impact on carbon lock-in, showing a "1 + 1 > 2" effect. (4) Industrial structure optimization and transition both affect carbon lock-in by improving technological innovation level, which is the impact mechanism. Some policy implications, such as sectoral diversification and promoting research and development, are put forward for better industrial structure development and carbon unlocking. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
48. Driving sustainable uptake: a systematic review of global literature on policies governing woody biomass for energy.
- Author
-
Pandey, Spriha and Erbaugh, James Thomas
- Subjects
BIOMASS energy ,CLEAN energy ,RENEWABLE energy sources ,SUSTAINABILITY ,ENERGY infrastructure ,CULTURAL pluralism - Abstract
Woody biomass has gained increased attention as a source of renewable energy. However, its categorization as a sustainable source of energy remains controversial, as its carbon neutrality depends on its end use, moisture content, bulk density, and the distance between the source of biomass and its end use. Due to these mediating factors, policies largely shape its sustainability and ability to mitigate emissions. This paper organizes and evaluates the current state of research through a systematic review of global literature from 2011 to 2021 (n = 345) on the governance of the production, transportation, sale, and use of woody biomass for energy. Peer-reviewed literature emphasizes the role of woody biomass as a decentralized energy source for individual households and communities, focusing on its harvest, transport, and localized energy conversion. Policies primarily address land management and energy infrastructure rather than direct emissions reduction. Research gaps in policy within the Global South underscore the need to examine biomass regulation in regions with limited energy diversity. The key factors that drive the sustainable uptake of woody biomass include strict sustainability criteria, fiscal incentives, technological development, and wood utilization from across its value chain. Effective policy implementation increases rural employment, boosts rural economies, provides energy security to remote areas, improves overall environmental sustainability, reduces emissions, and improves land management practices. Our systematic review reveals that future research should focus on improving conversion efficiencies in small-scale systems, reducing emissions in the international trade of woody biomass, and using the wood value chain to increase the profitability of bioenergy products. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
49. On the Possibility of Synthesis of Silicon Carbide Using an Indirect-Action Plasma Gun.
- Author
-
Gerasimov, R. D., Shekhovtsov, V. V., Vasil'eva, Yu. Z., Pak, A. Ya., Mamontov, G. Ya., and Volokitin, O. G.
- Subjects
SILICON carbide ,PLASMA torch ,THERMAL plasmas ,PLASMA flow ,POSSIBILITY - Abstract
The paper presents the results of experimental and theoretical investigations into the synthesis of silicon carbide using the energy of thermal plasma. The experimental investigations were conducted on a stand with 4 kW of power making it possible to have a thermal plasma flow with a bulk temperature of 5600 K. Regimes have been identified for the synthesis of silicon carbide and concentration of composite charge mixture components determining its yield. On the basis of processing experimental data, key characteristics have been calculated for the technological process of silicon carbide synthesis (time and load mass). [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
50. Review papers in Journal of Materials Science Volumes 39 and 40.
- Subjects
- *
ALLOYS , *POLYMERS , *COMPOSITE materials , *SHAPE memory alloys , *CARBON - Abstract
Presents review papers in the volumes 39 and 40 of the February 15, 2005 issue of the "Journal of Materials Science". Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials; Thermo-mechanical fatigue of shape memory alloys; Electrical applications of carbon materials,
- Published
- 2005
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.