Search

In regions that undergo low deformation rates, as is the case for metropolitan France (i.e. the part of France in Europe), the use of historical seismicity, in addition to instrumental data, is necessary when dealing with seismic hazard assessment. This paper presents the strategy adopted to develop a parametric earthquake catalogue using moment magnitude Mw, as the reference magnitude scale to cover both instrumental and historical periods for metropolitan France. Work performed within the framework of the SiHex (SIsmicité de l’HEXagone) (Cara et al. Bull Soc Géol Fr 186:3-19, 2015. doi:10.2113/qssqfbull.186.1.3) and SIGMA (SeIsmic Ground Motion Assessment; EDF-CEA-AREVA-ENEL) projects, respectively on instrumental and historical earthquakes, have been combined to produce the French seismic CATalogue, version 2017 (FCAT-17). The SiHex catalogue is composed of ~40,000 natural earthquakes, for which the hypocentral location and Mw magnitude are given. In the frame of the SIGMA research program, an integrated study has been realized on historical seismicity from intensity prediction equations (IPE) calibration in Mw detailed in Baumont et al. (submitted) companion paper to their application to earthquakes of the SISFRANCE macroseismic database (BRGM, EDF, IRSN), through a dedicated strategy developed by Traversa et al. (Bull Earthq Eng, 2017. doi:10.1007/s10518-017-0178-7) companion paper, to compute their Mw magnitude and depth. Macroseismic data and epicentral location and intensity used both in IPE calibration and inversion process, are those of SISFRANCE without any revision. The inversion process allows the main macroseismic field specificities reported by SISFRANCE to be taken into account with an exploration tree approach. It also allows capturing the epistemic uncertainties associated with macroseismic data and to IPEs selection. For events that exhibit a poorly constrained macroseismic field (mainly old, cross border or off-shore earthquakes), joint inversion of Mw and depth is not possible, and depth needs to be fixed to calculate Mw. Regional a priori depths have been defined for this purpose based on analysis of earthquakes with a well constrained macroseismic field where joint inversion of Mw and depth is possible. As a result, 27% of SISFRANCE earthquake seismological parameters have been jointly inverted and for the other 73% Mw has been calculated assuming a priori depths. The FCAT-17 catalogue is composed of the SIGMA historical parametric catalogue (magnitude range between 3.5 up to 7.0), covering from AD463 to 1965, and of the SiHex instrumental one, extending from 1965 to 2009. Historical part of the catalogue results from an automatic inversion of SISFRANCE data. A quality index is estimated for each historical earthquake according to the way the events are processed. All magnitudes are given in Mw which makes this catalogue directly usable as an input for probabilistic or deterministic seismic hazard studies. Uncertainties on magnitudes and depths are provided for historical earthquakes following calculation scheme presented in Traversa et al. (2017). Uncertainties on magnitudes for instrumental events are from Cara et al. (J Seismol 21:551-565, 2017. doi:10.1007/s10950-016-9617-1). [ABSTRACT FROM AUTHOR]

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods. [ABSTRACT FROM AUTHOR]

The estimation of the seismological parameters of historical earthquakes is a key step when performing seismic hazard assessment in moderate seismicity regions as France. We propose an original method to assess magnitude and depth of historical earthquakes using intensity data points. A flowchart based on an exploration tree (ET) approach allows to apply a consistent methodology to all the different configurations of the earthquake macroseismic field and to explore the inherent uncertainties. The method is applied to French test case historical earthquakes, using the SisFrance (BRGM, IRSN, EDF) macroseismic database and the intensity prediction equations (IPEs) calibrated in the companion paper (Baumont et al. Bull Earthq Eng, 2017). A weighted least square scheme allowing for the joint inversion of magnitude and depth is applied to earthquakes that exhibit a decay of intensity with distance. Two cases are distinguished: (1) a “Complete ET” is applied to earthquakes located within the metropolitan territory, while (2) a “Simplified ET” is applied to both, offshore and cross border events, lacking information at short distances but disposing of reliable data at large ones. Finally, a priori-depth-based magnitude computation is applied to ancient or poorly documented events, only described by single/sporadic intensity data or few macroseismic testimonies. Specific processing of “felt” testimonies allows exploiting this complementary information for poorly described earthquakes. Uncertainties associated to magnitude and depth estimates result from both, full propagation of uncertainties related to the original macroseismic information and the epistemic uncertainty related to the IPEs selection procedure. [ABSTRACT FROM AUTHOR]

A proper assessment of seismic hazard is of considerable importance in order to achieve suitable building construction criteria. This paper presents probabilistic seismic hazard assessment in and around Pakistan (23° N-39° N; 59° E-80° E) in terms of peak ground acceleration (PGA). Ground motion is calculated in terms of PGA for a return period of 475 years using a seismogenic-free zone method of Gumbel’s first asymptotic distribution of extreme values and Monte Carlo simulation. Appropriate attenuation relations of universal and local types have been used in this study. The results show that for many parts of Pakistan, the expected seismic hazard is relatively comparable with the level specified in the existing PGA maps. [ABSTRACT FROM AUTHOR]

This paper investigates damping modification factors in eastern Canada based on historical and simulated records compatible with seismic hazard in this region. Damping modification factors are characterized as a function of magnitude, distance, site condition, and damping ratio. Damping modification factors corresponding to historical and simulated ground motions on rock sites are shown to exhibit the same trends for all damping levels. In addition to period dependency of damping modification factors, we demonstrate their sensitivity to magnitude variations at longer periods. The effect of distance is shown to be less pronounced. It is also observed that soil conditions affect damping modification factors at short as well as longer periods. Period-dependent equations are proposed for practical assessment of damping modification factors corresponding to damping ratios between 1 and 40 %, considering different magnitude-distance combinations and soil conditions representative of seismic hazard in eastern Canada. [ABSTRACT FROM AUTHOR]

In the frame of the European Commission project 'Seismic Hazard Harmonization in Europe' (SHARE), aiming at harmonizing seismic hazard at a European scale, the compilation of a homogeneous, European parametric earthquake catalogue was planned. The goal was to be achieved by considering the most updated historical dataset and assessing homogenous magnitudes, with support from several institutions. This paper describes the SHARE European Earthquake Catalogue (SHEEC), which covers the time window 1000-1899. It strongly relies on the experience of the European Commission project 'Network of Research Infrastructures for European Seismology' (NERIES), a module of which was dedicated to create the European 'Archive of Historical Earthquake Data' (AHEAD) and to establish methodologies to homogenously derive earthquake parameters from macroseismic data. AHEAD has supplied the final earthquake list, obtained after sorting duplications out and eliminating many fake events; in addition, it supplied the most updated historical dataset. Macroseismic data points (MDPs) provided by AHEAD have been processed with updated, repeatable procedures, regionally calibrated against a set of recent, instrumental earthquakes, to obtain earthquake parameters. From the same data, a set of epicentral intensity-to-magnitude relations has been derived, with the aim of providing another set of homogeneous Mw estimates. Then, a strategy focussed on maximizing the homogeneity of the final epicentral location and Mw, has been adopted. Special care has been devoted also to supply location and Mw uncertainty. The paper focuses on the procedure adopted for the compilation of SHEEC and briefly comments on the achieved results. [ABSTRACT FROM AUTHOR]

The paper considers Poisson temporal occurrence of earthquakes and presents a way to integrate uncertainties of the estimates of mean activity rate and magnitude cumulative distribution function in the interval estimation of the most widely used seismic hazard functions, such as the exceedance probability and the mean return period. The proposed algorithm can be used either when the Gutenberg-Richter model of magnitude distribution is accepted or when the nonparametric estimation is in use. When the Gutenberg-Richter model of magnitude distribution is used the interval estimation of its parameters is based on the asymptotic normality of the maximum likelihood estimator. When the nonparametric kernel estimation of magnitude distribution is used, we propose the iterated bias corrected and accelerated method for interval estimation based on the smoothed bootstrap and second-order bootstrap samples. The changes resulted from the integrated approach in the interval estimation of the seismic hazard functions with respect to the approach, which neglects the uncertainty of the mean activity rate estimates have been studied using Monte Carlo simulations and two real dataset examples. The results indicate that the uncertainty of mean activity rate affects significantly the interval estimates of hazard functions only when the product of activity rate and the time period, for which the hazard is estimated, is no more than 5.0. When this product becomes greater than 5.0, the impact of the uncertainty of cumulative distribution function of magnitude dominates the impact of the uncertainty of mean activity rate in the aggregated uncertainty of the hazard functions. Following, the interval estimates with and without inclusion of the uncertainty of mean activity rate converge. The presented algorithm is generic and can be applied also to capture the propagation of uncertainty of estimates, which are parameters of a multiparameter function, onto this function. [ABSTRACT FROM AUTHOR]

Earthquakes are known to have occurred in Indian subcontinent from ancient times. This paper presents the results of seismic hazard analysis of India (6°-38°N and 68°-98°E) based on the deterministic approach using latest seismicity data (up to 2010). The hazard analysis was done using two different source models (linear sources and point sources) and 12 well recognized attenuation relations considering varied tectonic provinces in the region. The earthquake data obtained from different sources were homogenized and declustered and a total of 27,146 earthquakes of moment magnitude 4 and above were listed in the study area. The sesismotectonic map of the study area was prepared by considering the faults, lineaments and the shear zones which are associated with earthquakes of magnitude 4 and above. A new program was developed in MATLAB for smoothing of the point sources. For assessing the seismic hazard, the study area was divided into small grids of size 0.1° × 0.1° (approximately 10 × 10 km), and the hazard parameters were calculated at the center of each of these grid cells by considering all the seismic sources within a radius of 300 to 400 km. Rock level peak horizontal acceleration (PHA) and spectral accelerations for periods 0.1 and 1 s have been calculated for all the grid points with a deterministic approach using a code written in MATLAB. Epistemic uncertainty in hazard definition has been tackled within a logic-tree framework considering two types of sources and three attenuation models for each grid point. The hazard evaluation without logic tree approach also has been done for comparison of the results. The contour maps showing the spatial variation of hazard values are presented in the paper. [ABSTRACT FROM AUTHOR]

This paper begins with a critical assessment of the concept of macroseismic intensity, on which traditional scales, such as MSK and EMS, are based. The main shortcoming identified is the model's failure to consider the spectral features of ground motion. This omission may lead to erroneous seismic zonation, as shown in the paper. As a result, the model is of little interest to engineers who must design and build safe structures while adopting economical solutions. The paper presents a way to radically improve this situation. The starting point for this approach was the experience of the destructive Vrancea earthquake of 1977.03.04, which made it clear that intensity appears to be different for structures having natural periods pertaining to different spectral domains. The solution proposed to the shortcomings of the traditional intensity concept is postulated on a system of analytical expressions, covering definitions of global intensities, of intensities related to oscillation frequency and of intensities related to a definite spectral band. The latter definition lies at the basis of a definition of discrete intensity spectra. Illustrative applications are presented, in relation to global intensities and to discrete intensity spectra. We then analyze an illustrative case in which the use of traditional macroseismic survey techniques led to erroneous seismic zonation. Finally, some conclusions and recommendations are presented. Based on the authors' long-term experience, we strongly recommend close interaction between seismologists and engineers in working groups and joint projects targeted on radical improvement of the basic concepts of seismic intensity and of specific analysis procedures. [ABSTRACT FROM AUTHOR]

The Chilean subduction zone is one of the most active of the world with M = 8 or larger interplate thrust earthquakes occurring every 10 years or so on the average. The identification and characterization of pulses propagated from dominant asperities that control the rupture of these earthquakes is an important problem for seismology and especially for seismic hazard assessment since it can reduce the earthquake destructiveness potential. A number of studies of large Chilean earthquakes have revealed that the source time functions of these events are composed of a number of distinct energy arrivals. In this paper, we identify and characterize the high frequency pulses of dominant asperities using near source strong motion records. Two very well recorded interplate earthquakes, the 1985 Central Chile (Ms = 7.8) and the 2007 Tocopilla (Mw = 7.7), are considered. In particular, the 2007 Tocopilla earthquake was recorded by a network with absolute time and continuos recording. From the study of these strong motion data it is possible to identify the arrival of large pulses coming from different dominant asperities. The recognition of the key role of dominant asperities in seismic hazard assessment can reduce overestimations due to scattering of attenuation formulas that consider epicentral distance or shortest distance to the fault rather than the asperity distance. The location and number of dominant asperities, their shape, the amplitude and arrival time of pulses can be one of the principal factors influencing Chilean seismic hazard assessment and seismic design. The high frequency pulses identified in this paper have permitted us to extend the range of frequency in which the 1985 Central Chile and 2007 Tocopilla earthquakes were studied. This should allow in the future the introduction of this seismological result in the seismic design of earthquake engineering. [ABSTRACT FROM AUTHOR]

The Indian subcontinent is characterized by various tectonic units viz., Himalayan collision zone in North, Indo-Burmese arc in north-east, failed rift zones in its interior in Peninsular Indian shield and Andaman Sumatra trench in south-east Indian Territory. During the last about 100 years, the country has witnessed four great and several major earthquakes. Soon after the occurrence of the first great earthquake, the Shillong earthquake ( M: 8.1) in 1897, efforts were started to assess the seismic hazard in the country. The first such attempt was made by Geological Survey of India in 1898 and since then considerable progress has been made. The current seismic zonation map prepared and published by Bureau of Indian Standards, broadly places seismic risk in different parts of the country in four major zones. However, this map is not sufficient for the assessment of area-specific seismic risks, necessitating detailed seismic zoning, that is, microzonation for earthquake disaster mitigation and management. Recently, seismic microzonation studies are being introduced in India, and the first level seismic microzonation has already been completed for selected urban centres including, Jabalpur, Guwahati, Delhi, Bangalore, Ahmadabad, Dehradun, etc. The maps prepared for these cities are being further refined on larger scales as per the requirements, and a plan has also been firmed up for taking up microzonation of 30 selected cities, which lie in seismic zones V and IV and have a population density of half a million. The paper highlights the efforts made in India so far towards seismic hazard assessment as well as the future road map for such studies. [ABSTRACT FROM AUTHOR]

Sivas city, located in the inner east part of Anatolia (Turkey), is far from seismic sources. However, the city is under risk owing to strong earthquakes occurring around the area, and different soil conditions that can produce variation in the ground motion amplification. Microzonation of cities provides a basis for site-specific hazard analysis in urban settlements. In particular, seismic microzonation can be achieved by means of detailed seismic assessment of the area, including earthquake recordings and geological studies. In this paper, we propose a preliminary microzonation map for the city of Sivas, based on the variation in the dominant periods of the sediments covering the area. The periods are retrieved from microtremor measurements conducted at 114 sites, using the horizontal-to-vertical spectral ratio technique. The results of microtremor analysis were compared with those obtained from refraction microtremor measurements at two profiles crossing the studied area. According to the classification of dominant periods, Sivas area can be divided into four zones, probably prone to different levels of seismic hazard. However, specific studies including analysis of weak earthquakes are required in the future to validate our microzonation map. [ABSTRACT FROM AUTHOR]

This paper describes the activities of the Kamchatka Branch of the Russian Expert Council on Earthquake Prediction, Assessment of Seismic Hazard and Risk (KB REC) over a 14 year period. We provide brief information on how the KB REC functions, the methods that are used for earthquake prediction in expert assessments, forecasts, and precursors of M ≥ 6.0 Kamchatka earthquakes for the 1998-2011 period. The efficiency of prediction using several methods is estimated. [ABSTRACT FROM AUTHOR]

This paper presents a detailed study on the seismic pattern of the state of Karnataka and also quantifies the seismic hazard for the entire state. In the present work, historical and instrumental seismicity data for Karnataka (within 300 km from Karnataka political boundary) were compiled and hazard analysis was done based on this data. Geographically, Karnataka forms a part of peninsular India which is tectonically identified as an intraplate region of Indian plate. Due to the convergent movement of the Indian plate with the Eurasian plate, movements are occurring along major intraplate faults resulting in seismic activity of the region and hence the hazard assessment of this region is very important. Apart from referring to seismotectonic atlas for identifying faults and fractures, major lineaments in the study area were also mapped using satellite data. The earthquake events reported by various national and international agencies were collected until 2009. Declustering of earthquake events was done to remove foreshocks and aftershocks. Seismic hazard analysis was done for the state of Karnataka using both deterministic and probabilistic approaches incorporating logic tree methodology. The peak ground acceleration (PGA) at rock level was evaluated for the entire state considering a grid size of 0.05° × 0.05°. The attenuation relations proposed for stable continental shield region were used in evaluating the seismic hazard with appropriate weightage factors. Response spectra at rock level for important Tier II cities and Bangalore were evaluated. The contour maps showing the spatial variation of PGA values at bedrock are presented in this work. [ABSTRACT FROM AUTHOR]

Up to now, the search for increased reliability in probabilistic seismic hazard analysis (PSHA) has concentrated on ways of assessing expert opinion and subjective judgement. Although in some areas of PSHA subjective opinion is unavoidable, there is a danger that assessment procedures and review methods contribute further subjective judgements on top of those already elicited. It is helpful to find techniques for objectively assessing seismic source models that show what the interpretations physically mean in terms of seismicity. Experience shows that well-meaning but flawed design decisions can lead to source models that are incompatible with the seismic history that was used as input. In this paper a method is demonstrated in which large numbers of synthetic earthquake catalogues, that match the completeness thresholds of the historical catalogue, are generated. The study area can be divided into a grid of uniform cells, and the number of earthquakes in each cell in both the historical catalogue and each simulated catalogue are then counted. Comparison of the historical pattern and a set of 1,000 simulated patterns, using a X test, shows if the historical pattern is credibly a member of the set of outcomes obtainable from the seismic source model. A second method is to chart the distribution of a large sample of simulated catalogues in terms of magnitude frequency, and observe whether the historical catalogue is comfortably within this distribution, or an outlier. If it proves impossible to replicate the historical catalogue using the model, it casts doubt on whether the model is a valid depiction of the seismicity rates that will govern the future hazard. At the very least, the disparity needs careful investigation to ensure the model is error-free. A worked example is presented here for the UK, using a source model that was used in Global Seismic Hazard Map (GSHAP), compared to one that was artificially constructed to be credible but flawed. Two tests find the GSHAP model to be an acceptable representation of the pattern of seismicity in the UK, while the artificial model is conclusively rejected. [ABSTRACT FROM AUTHOR]

The first part of the paper defines the terms and classifications common in earthquake prediction research and applications. This is followed by short reviews of major earthquake prediction programs initiated since World War II in several countries, for example the former USSR, China, Japan, the United States, and several European countries. It outlines the underlying expectations, concepts, and hypotheses, introduces the technologies and methodologies applied and some of the results obtained, which include both partial successes and failures. Emphasis is laid on discussing the scientific reasons why earthquake prediction research is so difficult and demanding and why the prospects are still so vague, at least as far as short-term and imminent predictions are concerned. However, classical probabilistic seismic hazard assessments, widely applied during the last few decades, have also clearly revealed their limitations. In their simple form, they are time-independent earthquake rupture forecasts based on the assumption of stable long-term recurrence of earthquakes in the seismotectonic areas under consideration. Therefore, during the last decade, earthquake prediction research and pilot applications have focused mainly on the development and rigorous testing of long and medium-term rupture forecast models in which event probabilities are conditioned by the occurrence of previous earthquakes, and on their integration into neo-deterministic approaches for improved time-variable seismic hazard assessment. The latter uses stress-renewal models that are calibrated for variations in the earthquake cycle as assessed on the basis of historical, paleoseismic, and other data, often complemented by multi-scale seismicity models, the use of pattern-recognition algorithms, and site-dependent strong-motion scenario modeling. International partnerships and a global infrastructure for comparative testing have recently been developed, for example the Collaboratory for the Study of Earthquake Predictability (CSEP) with test regions in California, Italy, Japan, New Zealand, and the Western Pacific. Algorithms and data bases are operated in a permanently learning and upgrading mode. Future perspectives and research requirements and the feasibility and possible problems encountered with the implementation of earthquake predictions in practice are briefly summarized. [ABSTRACT FROM AUTHOR]

We present the basis for a method for estimating the return period of large and medium earthquakes that is independent of current deterministic and probabilistic approaches. The two standard techniques of seismic hazard assessment-probabilistic seismic hazard assessment (PSHA) and deterministic seismic hazard assessment (DSHA)-suffer from limited knowledge of seismic prehistory. A further weakness of PSHA is its requirement of homogeneous seismic activity within a seismic zone. Moreover, PSHA and DSHA were developed for seismically active areas and, thus, cannot reliably be used in areas of medium and low activity. In this paper we propose the combined use of geodetic strain rate data and the seismic moment data set determined for past seismic events. This combination represents a new and independent approach to estimation of future seismic activity. Using a modified version of Kostrov's (Phys Solid Earth 1:23-40, ) equation and the catalogue of seismic moments, the minimum return period of the strongest earthquakes of a source area is estimated. [ABSTRACT FROM AUTHOR]

Dense strong motion observation networks provided us with valuable data for studying strong motion generation from large earthquakes. From kinematic waveform inversion of seismic data, the slip distribution on the fault surface of large earthquakes is known to be spatially heterogeneous. Because heterogeneities in the slip and stress drop distributions control the generation of near-source ground motion, it is important to characterize these heterogeneities for past earthquakes in constructing a source model for reliable prediction of strong ground motion. The stress changes during large earthquakes on the faults recently occurring in Japan are estimated from the detailed slip models obtained by the kinematic waveform inversion. The stress drops on and off asperities are summarized on the basis of the stress change distributions obtained here. In this paper, we define the asperity to be a rectangular area whose slip is 1.5 or more times larger than the average slip over the fault according to the previous study for inland crustal earthquakes. The average static stress drops on the asperities of the earthquakes studied here are in the range 6-23 MPa, whereas those off the asperities are below 3 MPa. We compiled the stress drop on the asperities together with a data set from previous studies of other inland earthquakes in Japan and elsewhere. The static stress drop on the asperity depends on its depth, and we obtained an empirical relationship between the static stress drop and the asperity's depth. Moreover, surface-breaking asperities seemed to have smaller stress drops than buried asperities. Simple ground motion simulations using the characterized asperity source models reveal that deep asperities generate larger ground motion than shallow asperities, because of the different stress drops of the asperities. These characteristics can be used for advanced source modeling in strong ground motion prediction for inland crustal earthquakes. [ABSTRACT FROM AUTHOR]

Izmir, the third largest city and one of the major economic centers in Turkey, has more than three million residents and one-half million buildings. The city, located in a seismically active region in western Anatolia, was a subject of the 1997 RADIUS (Risk Assessment Tools for Diagnosis of Urban Areas against Seismic Disaster) project. In this paper, the seismic hazard of Izmir is investigated through probabilistic seismic hazard assessment. First, the seismic setting of Izmir is presented. Considering the statistics of earthquakes that took place in the region during the period 1900-2005, a simple seismic hazard model is used to facilitate the assessment. To account for modeling uncertainties associated with the values of seismicity parameters, a logic tree procedure is employed in carrying out the seismic hazard computations. The resulting weighted average seismic hazard, presented in terms of peak ground acceleration and associated probability of exceedence, could be considered the 'best estimate' of seismic hazard for Izmir. Accordingly, for a return period of 475 years, for rock sites, a PGA value of 0.34 g is calculated. This PGA hazard estimate is close to the current code-recommended design acceleration level for Izmir. [ABSTRACT FROM AUTHOR]

Peninsular India (PI), which lies south of 24°N latitude, has experienced several devastating earthquakes in the past. However, very few strong motion records are available for developing attenuation relations for ground acceleration, required by engineers to arrive at rational design response spectra for construction sites and cities in PI. Based on a well-known seismological model, the present paper statistically simulates ground motion in PI to arrive at an empirical relation for estimating 5% damped response spectra, as a function of magnitude and source to site distance, covering bedrock and soil conditions. The standard error in the proposed relationship is reported as a function of the frequency, for further use of the results in probabilistic seismic hazard analysis. [ABSTRACT FROM AUTHOR]

Seismic hazard in terms of spectral acceleration ( SA) has been estimated for the first time in northern Algeria. For this purpose, we have used the spatially-smoothed seismicity approach. The present paper is intended to be a continuation of previous work in which we have evaluated the seismic hazard in terms of peak ground acceleration ( PGA) using the same methodology. To perform these evaluations, four complete and Poissonian seismic models have been used. One of them considers earthquakes with magnitudes above M S 6.5 in the last 300 years, that is, the most energetic seismicity in the region. Firstly, seismic hazard maps in terms of SA, at periods of 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 and 2.0 sec, with 39.3% and 10% probability of exceedance in 50 years, have been obtained. Therefore, uniform hazard spectra ( UHS) are computed and examined in detail for twelve of the most industrial and populated cities in northern Algeria. All the reported results in this study are for rock soil and 5% of damping. It is noteworthy that, in the seismic hazard maps as well as in the UHS plots, we observe maximum SA values in the central area of the Tell. The higher values are reached in the Chleff region (previously El Asnam), specifically around the location of the destructive earthquakes of September 9, 1954 ( M S 6.8), and October 10, 1980 ( M S 7.3). These maximum values, 0.4 g and 1.0 g, are associated with periods of about 0.2 and 0.3 sec for return periods of 100 and 475 years, respectively. [ABSTRACT FROM AUTHOR]

The occurrence of the Algiers earthquake ( M 6.8) of May 21, 2003, has motivated the necessity to reassess the probabilistic seismic hazard of northern Algeria. The fact that this destructive earthquake took place in an area where there was no evidence of previous significant earthquakes, neither instrumental nor historical, strongly encourages us to review the seismic hazard map of this region. Recently, the probabilistic seismic hazard of northern Algeria was computed using the spatially smoothed seismicity methodology. The catalog used in the previous computation was updated for this review, and not only includes information until June 2003, but also considers a recent re-evaluation of several historical earthquakes. In this paper, the same methodology and seismicity models are utilized in an effort to compare this methodology against an improved and updated seismic catalog. The largest mean peak ground acceleration (PGA) values are obtained in northernmost Algeria, specifically in the central area of the Tell Atlas. These values are of the order of 0.48 g for a return period of 475 years. In the City of Algiers, the capital of Algeria, and approximately 50 km from the reported epicenter of this latest destructive earthquake, a new mean PGA value of 0.23 g is obtained for the same return period. This value is 0.07 g greater than that obtained in the previous computation. In general, we receive greater seismic hazard results in the surrounding area of Algiers, especially to the southwest. The main reason is not this recent earthquake by itself, but the significant increase in the mmax magnitude in the seismic source where the city and the epicenter are included. [ABSTRACT FROM AUTHOR]

The recent earthquakes in California and Japan have shown the fundamental role that the road infrastructure plays in emergencies. In fact, only the maintenance of a sufficient level of efficiency can help to quickly reach the affected areas and thus avoid further serious consequences. The necessity of guaranteeing the functionality of the transport network during seismic events therefore requires seismic risk planning extended also to the road infrastructures in order to support the management of post-earthquake emergencies. Analogously it is fundamentally important to have analysis instruments of the road system able to preventatively evaluate the effects of earthquakes in order to identify possible emergencies, therefore preparing a program of intervention to reduce seismic risk on road networks. This paper proposes a methodology for the evaluation of seismic risk of road infrastructures according to the following points:•Study of seismic hazard of the site for the definition of a seismic scenario using attenuation models in relation to historical seismology and the geological and tectonic characteristics of the territory;•Analysis of the direct exposure connected to the probability of the presence of road users on the different parts of the network directly exposed to the seismic event;•Analysis of the indirect exposure relative to the distribution of the population and the infrastructures for which post-earthquake accessibility must be guaranteed;•Evaluation of the functional vulnerability in relation to the potential replaceability of damaged stretches considering network configuration and geometrical characteristics;•Evaluation of structural vulnerability of the stretch correlated to the characteristics (structural, mechanical, technological, etc.) of the different components (bridges, embankments, trenches, tunnels) that make up the stretches obtained by the use of correctly elaborated tables for each component.The determination of global risk indexes of the single stretches and of the network, evaluated by means of a relationship between the ascertained parameters derived from the investigation of the previous points, provides the necessary information for the definition of mitigation measures to reduce the risk and for management planning before and after disaster. The proposed methodology, which has already been applied to a restricted area, is currently being applied to the province of Catania (Sicily, Italy), which is one of the geographical regions of highest seismic risk in Europe, and its future extension to all of eastern Sicily is foreseeable. [ABSTRACT FROM AUTHOR]