Search

The von Mises distribution has played a central role as a distribution on the circle. Its associated circular regression model has been applied in a number of areas. In this paper, we consider the von Mises regression model and, under a sequence of Pitman alternatives, derive the nonnull asymptotic expansions of the cumulative distribution functions of the likelihood ratio, Wald, Rao score, and gradient test statistics for testing a subset of the von Mises regression parameters, as well as for testing the concentration parameter. We then compare analytically the local power of these likelihood-based tests on the basis of the asymptotic expansions and provide conditions where one test can be more locally powerful than the other one in this class of regression models. Consequently, on the basis of the general conditions established, the user can choose the most powerful test to make inferences on the model parameters. We also provide a numerical example to illustrate the usefulness and applicability of the general result. [ABSTRACT FROM AUTHOR]

In recent years, some interested data can be recorded only if the values fall within an interval range, and the responses are often subject to censoring. Attempting to perform effective statistical analysis with censored, especially heavy-tailed and asymmetric data, can be difficult. In this paper, we develop a novel linear regression model based on the proposed skewed generalized t distribution for censored data. The likelihood-based inference and diagnostic analysis are established using the Expectation/Conditional Maximization Either algorithm in conjunction with smoothing approximate functions. We derive relevant measures to perform global influence for this novel model and develop local influence analysis based on the conditional expectation of the complete-data log-likelihood function. Some useful perturbation schemes are discussed. We illustrate the finite sample performance and the robustness of the proposed method by simulation studies. The proposed model is compared with other procedures based on a real dataset, and a sensitivity analysis is also conducted. [ABSTRACT FROM AUTHOR]

In this note, we make some comments about the paper of Alheety and Kibria (2014) and correct the wrongly proved Theorems in that paper. [ABSTRACT FROM AUTHOR]

Among the models applied to analyze survival data, a standout is the inverse Gaussian distribution, which belongs to the class of models to analyze positive asymmetric data. However, the variance of this distribution depends on two parameters, which prevents establishing a functional relation with a linear predictor when the assumption of constant variance does not hold. In this context, the aim of this paper is to re-parameterize the inverse Gaussian distribution to enable establishing an association between a linear predictor and the variance. We propose deviance residuals to verify the model assumptions. Some simulations indicate that the distribution of these residuals approaches the standard normal distribution and the mean squared errors of the estimators are small for large samples. Further, we fit the new model to hospitalization times of COVID-19 patients in Piracicaba (Brazil) which indicates that men spend more time hospitalized than women, and this pattern is more pronounced for individuals older than 60 years. The re-parameterized inverse Gaussian model proved to be a good alternative to analyze censored data with non-constant variance. [ABSTRACT FROM AUTHOR]

Dealing with missing values is an important issue in data observation or data recording process. In this paper, we consider a functional linear regression model with partially observed covariate and missing values in the response. We use a reconstruction operator that aims at recovering the missing parts of the explanatory curves, then we are interested in regression imputation method of missing data on the response variable, using functional principal component regression to estimate the functional coefficient of the model. We study the asymptotic behaviour of the prediction error when missing data are replaced by the imputed values in the original dataset. The practical behaviour of the method is also studied on simulated data and a real dataset. [ABSTRACT FROM AUTHOR]

Estimation and prediction of regression models with partition forms are widely applied techniques in statistical inference and data analysis. In this paper, we consider some fundamental inference problems regarding a linear random-effects model (LREM) and its reduced models without statistical distribution assumptions for error terms. We shall present a partition form of LREM and its correctly-reduced models, introduce the consistency concepts of the LREM and its reduced models, define the predictability/estimability of unknown parameters in the LREM and its reduced models, establish the matrix equations and analytical formulas associated with best linear unbiased predictors (BLUPs) and best linear unbiased estimators (BLUEs) of all unknown parameter vectors in the LREM and its reduced models, and present many fundamental decomposition equalities for the BLUPs/BLUEs of all unknown parameters in the LREM and its reduced models. [ABSTRACT FROM AUTHOR]

In regression analysis, to deal with the problem of multicollinearity, the restricted principal components regression estimator is proposed. In this paper, we compared the restricted principal components regression estimator, the principal components regression estimator, and the ordinary least-squares estimator with each other under the Pitman's closeness criterion. We showed that the restricted principal components regression estimator is always superior to the principal components regression estimator, under certain conditions the restricted principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion and under certain conditions the principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion. [ABSTRACT FROM PUBLISHER]

Researchers in statistical shape analysis often analyze outlines of objects. Even though these contours are infinite-dimensional in theory, they must be discretized in practice. When discretizing, it is important to reduce the number of sampling points considerably to reduce computational costs, but to not use too few points so as to result in too much approximation error. Unfortunately, determining the minimum number of points needed to achieve sufficiently approximate the contours is computationally expensive. In this paper, we fit regression models to predict these lower bounds using characteristics of the contours that are computationally cheap as predictor variables. However, least squares regression is inadequate for this task because it treats overestimation and underestimation equally, but underestimation of lower bounds is far more serious. Instead, to fit the models, we use the LINEX loss function, which allows us to penalize underestimation at an exponential rate while penalizing overestimation only linearly. We present a novel approach to select the shape parameter of the loss function and tools for analyzing how well the model fits the data. Through validation methods, we show that the LINEX models work well for reducing the underestimation for the lower bounds. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of variance estimation of predictions obtained from a subsampling-based ensemble estimator, such as subbagging and sub-random forest. We first recognize that a subsampling-based ensemble can be written as an infinite-order U-statistic of degree k n , where k n is the subsample size that may depend on the learning sample size n. As a result, one can study the uncertainty of predictions obtained from a subsampling-based ensemble under a U-statistic framework, such as approximating its asymptotic variance. However, existing methods used to estimate the asymptotic variance relies on some regularity conditions. In addition, they tend to yield variance estimations with large bias in finite sample scenarios. Motivated by the work of Wang and Lindsay (2014), we propose to construct an unbiased variance estimator for a subsampling-based ensemble. It is efficient to realize with the help of a partition-resampling scheme. We show by simulation studies that the proposed variance estimator yields better performance in terms of mean, standard deviation, and mean squared error compared to both the infinitesimal jackknife and internal variance estimation methods under either a simple linear regression model or a multivariate adaptive regression splines model. Furthermore, we present how to construct an asymptotic confidence interval for the expected prediction at a given test instance using the proposed variance estimator, and compare its coverage probability to that of competing methods. In the end, we demonstrate the practical applications of the methodology using two real data examples. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new biased estimator called Liu-type estimator in gamma regression models in the presence of collinearity. We also consider some other estimators such as ridge estimator and Liu estimator and conduct a Monte Carlo simulation study to compare the estimators under different designs of collinearity. Moreover, we provide a real data application to show the applicability of the new estimator. The simulations and real data results show that the proposed estimator outperforms better than other competitor estimators by yielding smaller mean squared error (MSE). [ABSTRACT FROM AUTHOR]

Compositional data frequently arise when data refer to components which are proportions or fractions of a whole. Within the log-ratio approach, the analysis of compositional data can be conducted in terms of log-ratio transformations of components. These transformations make it possible to overcome the problem of the constant-sum constraint, making standard statistical methods applicable. In the present work, the log-ratio approach based on orthogonal log-ratio coordinates is adopted to show how it can lead to considerable improvements in the interpretation of the results of regression modeling with compositional data, both as explanatory or response variables. In order to demonstrate its practical usefulness, the methodology presented in this paper is applied to the analysis of air pollution produced by vehicles traveling through road intersections, with a specific focus on the effect of the type of traffic control (traffic signal vs. roundabout) on CO2 emissions. [ABSTRACT FROM AUTHOR]

The common approach for regression analysis with compositional variables is to express compositions in log-ratio coordinates (coefficients) and then perform standard statistical processing in real space. Similar to working in real space, the problem is that the standard least squares regression fails when the number of parts of all compositional covariates is higher than the number of observations. The aim of this study is to analyze in detail the partial least squares (PLS) regression which can deal with this problem. In this paper, we focus on the PLS regression between more than one compositional response variable and more than one compositional covariate. First, we give the PLS regression model with log-ratio coordinates of compositional variables, then we express the PLS model directly in the simplex. We also prove that the PLS model is invariant under the change of coordinate system, such as the ilr coordinates with a different contrast matrix or the clr coefficients. Moreover, we give the estimation and inference for parameters in PLS model. Finally, the PLS model with clr coefficients is used to analyze the relationship between the chemical metabolites of Astragali Radix and the plasma metabolites of rat after giving Astragali Radix. [ABSTRACT FROM AUTHOR]

This paper shows the importance of the use of Monte Carlo experiments within Simple Linear Regression (SLR) Models through Refined Descriptive Sampling and proves practically that the asymptotic theory of the Ordinary Least Squares (OLS) estimator still hold with small samples when the Normality errors assumption is released. To this end, a simple Linear Regression adaptive Refined Descriptive Sampling (L2RDS) algorithm is proposed to estimate the parameter of SLR models by OLS method and computes its properties. Real data are used to properly specified the simulation model. The results show that L2RDS algorithm provides accurate and efficient point estimates. [ABSTRACT FROM AUTHOR]

It is well-known that classical Tobit estimator of the parameters of the censored regression (CR) model is inefficient in case of non-normal error terms. In this paper, we propose to use the modified maximum likelihood (MML) estimator under the Jones and Faddy's skew t-error distribution, which covers a wide range of skew and symmetric distributions, for the CR model. The MML estimators, providing an alternative to the Tobit estimator, are explicitly expressed and they are asymptotically equivalent to the maximum likelihood estimator. A simulation study is conducted to compare the efficiencies of the MML estimators with the classical estimators such as the ordinary least squares, Tobit, censored least absolute deviations and symmetrically trimmed least squares estimators. The results of the simulation study show that the MML estimators work well among the others with respect to the root mean square error criterion for the CR model. A real life example is also provided to show the suitability of the MML methodology. [ABSTRACT FROM AUTHOR]

As known, the least-squares estimator of the slope of a univariate linear model sets to zero the covariance between the regression residuals and the values of the explanatory variable. To prevent the estimation process from being influenced by outliers, which can be theoretically modelled by a heavy-tailed distribution for the error term, one can substitute covariance with some robust measures of association, for example Kendall's tau in the popular Theil–Sen estimator. In a scarcely known Italian paper, Cifarelli [(1978), ‘La Stima del Coefficiente di Regressione Mediante l'Indice di Cograduazione di Gini’,Rivista di matematica per le scienze economiche e sociali, 1, 7–38. A translation into English is available athttp://arxiv.org/abs/1411.4809and will appear inDecisions in Economics and Finance] shows that a gain of efficiency can be obtained by using Gini's cograduation index instead of Kendall's tau. This paper introduces a new estimator, derived from another association measure recently proposed. Such a measure is strongly related to Gini's cograduation index, as they are both built to vanish in the general framework of indifference. The newly proposed estimator is shown to be unbiased and asymptotically normally distributed. Moreover, all considered estimators are compared via their asymptotic relative efficiency and a small simulation study. Finally, some indications about the performance of the considered estimators in the presence of contaminated normal data are provided. [ABSTRACT FROM AUTHOR]

In this paper, we consider a regression model and propose estimators which are the weighted averages of two estimators among three estimators; the Stein-rule (SR), the minimum mean squared error (MMSE), and the adjusted minimum mean-squared error (AMMSE) estimators. It is shown that one of the proposed estimators has smaller mean-squared error (MSE) than the positive-part Stein-rule (PSR) estimator over a moderate region of parameter space when the number of the regression coefficients is small (i.e., 3), and its MSE performance is comparable to the PSR estimator even when the number of the regression coefficients is not so small. [ABSTRACT FROM AUTHOR]

In this paper, we propose a variable selection method for quantile regression model in ultra-high dimensional longitudinal data called as the weighted adaptive robust lasso (WAR-Lasso) which is double-robustness. We derive the consistency and the model selection oracle property of WAR-Lasso. Simulation studies show the double-robustness of WAR-Lasso in both cases of heavy-tailed distribution of the errors and the heavy contaminations of the covariates. WAR-Lasso outperform other methods such as SCAD and etc. A real data analysis is carried out. It shows that WAR-Lasso tends to select fewer variables and the estimated coefficients are in line with economic significance. [ABSTRACT FROM AUTHOR]

In this paper, we study the effects of near-singularity which is known as multicollinearity in the binary logistic regression. Furthermore, we also assume the presence of stochastic non-sample linear restrictions. The well-known logistic Liu estimator is combined with the stochastic linear restrictions in order to propose a new method, namely, the stochastic restricted Liu estimation. Theoretical comparisons between the usual maximum likelihood estimator, Liu estimator, stochastic restricted maximum-likelihood estimator and the new stochastic restricted Liu estimator are derived using matrix mean-squared errors of the estimators. A Monte Carlo simulation experiment is designed to evaluate the performances of the listed estimators in terms of mean-squared error and mean absolute error criteria. Artificial data are used to show how to interpret the theorems. According to the results of the simulation, the new method beats the other estimators when the data matrix has the problem of collinearity along with the stochastic restrictions. [ABSTRACT FROM AUTHOR]

An outlier is defined as an observation that is significantly different from the others in its dataset. In high-dimensional regression analysis, datasets often contain a portion of outliers. It is important to identify and eliminate the outliers for fitting a model to a dataset. In this paper, a novel outlier detection method is proposed for high-dimensional regression problems. The leave-one-out idea is utilized to construct a novel outlier detection measure based on distance correlation, and then an outlier detection procedure is proposed. The proposed method enjoys several advantages. First, the outlier detection measure can be simply calculated, and the detection procedure works efficiently even for high-dimensional regression data. Moreover, it can deal with a general regression, which does not require specification of a linear regression model. Finally, simulation studies show that the proposed method behaves well for detecting outliers in high-dimensional regression model and performs better than some other competing methods. [ABSTRACT FROM AUTHOR]

As direct generalization of the quantile regression for complete observed data, an estimation method for quantile regression models with interval censored data is proposed, and the property of consistency is obtained. The property of asymptotic normality is also established with a bias converging to zero, and to reduce the bias, two bias correction methods are proposed. Methods proposed in this paper do not require the censoring vectors to be identically distributed, and can be applied to models with various covariates. Simulation results show that the proposed methods work well. [ABSTRACT FROM AUTHOR]

In this paper, we investigated the Andrews–Pregibon (AP), COVRATIO and Cook–Weisberg (CW) statistics to determine the influential observations on the confidence ellipsoids in linear regression model with correlated errors and correlated regressors. A real example and a Monte Carlo simulation study are given to detect the effects of autocorrelation coefficient and ridge parameter on the AP, COVRATIO and CW statistics. [ABSTRACT FROM AUTHOR]

Regression analyses are commonly performed with doubly limited continuous dependent variables; for instance, when modeling the behavior of rates, proportions and income concentration indices. Several models are available in the literature for use with such variables, one of them being the unit gamma regression model. In all such models, parameter estimation is typically performed using the maximum likelihood method and testing inferences on the model's parameters are usually based on the likelihood ratio test. Such a test can, however, deliver quite imprecise inferences when the sample size is small. In this paper, we propose two modified likelihood ratio test statistics for use with the unit gamma regressions that deliver much more accurate inferences when the number of data points in small. Numerical (i.e. simulation) evidence is presented for both fixed dispersion and varying dispersion models, and also for tests that involve nonnested models. We also present and discuss two empirical applications. [ABSTRACT FROM AUTHOR]

This paper studies a linear regression model with asymptotically almost negatively associated (AANA, in short) random errors. Under some mild conditions, the weak consistency of M-estimator of the unknown parameter is investigated, which extend the corresponding results for independent random errors and negatively associated (NA, in short) random errors. At last, two simulation examples are presented to verify the weak consistency of M-estimator in the model. [ABSTRACT FROM AUTHOR]

Parametric regression models with certain parameter restrictions occur widely in statistical data analysis and inference. In some cases, we may wish to impose linear constraints on some subsets of fixed parameters in a given parametric regression model. This paper is concerned with some fundamental inference problems on a general linear model y = X β + ε in which the unknown parameter vector β is subject to a linear matrix equation restriction A β = b . We shall introduce the technical concepts and definitions of consistency, predictability, estimability, and formulas of the best linear unbiased predictors/best linear unbiased estimators (BLUPs/BLUEs) under a constrained general linear model (CGLM). We then show how to establish BLUPs/BLUEs of all unknown parameters in the CGLM, and present various properties of the BLUPs/BLUEs using the methodology of matrix ranks and inertias. [ABSTRACT FROM AUTHOR]

Augmented mixed beta regression models are suitable choices for modeling continuous response variables on the closed interval [0, 1]. The random eeceeects in these models are typically assumed to be normally distributed, but this assumption is frequently violated in some applied studies. In this paper, an augmented mixed beta regression model with skew-normal independent distribution for random effects are used. Next, we adopt a Bayesian approach for parameter estimation using the MCMC algorithm. The methods are then evaluated using some intensive simulation studies. Finally, the proposed models have applied to analyze a dataset from an Iranian Labor Force Survey. [ABSTRACT FROM AUTHOR]

In high-dimensional regression, the presence of influential observations may lead to inaccurate analysis results so that it is a prime and important issue to detect these unusual points before statistical regression analysis. Most of the traditional approaches are, however, based on single-case diagnostics, and they may fail due to the presence of multiple influential observations that suffer from masking effects. In this paper, an adaptive multiple-case deletion approach is proposed for detecting multiple influential observations in the presence of masking effects in high-dimensional regression. The procedure contains two stages. Firstly, we propose a multiple-case deletion technique, and obtain an approximate clean subset of the data that is presumably free of influential observations. To enhance efficiency, in the second stage, we refine the detection rule. Monte Carlo simulation studies and a real-life data analysis investigate the effective performance of the proposed procedure. [ABSTRACT FROM AUTHOR]

In this paper, we consider the finite mixture of quantile regression model from a Bayesian perspective by assuming the errors have the asymmetric Laplace distribution (ALD), and develop the Gibbs sampling algorithm to estimate various quantile conditional on covariate in different groups using the Normal-Exponential representation of the ALD. We conduct several simulations under different error distributions to demonstrate the performance of the algorithm, and finally apply it to analyse a real data set, finding that the procedure has good performance. [ABSTRACT FROM AUTHOR]

Quantile regression (QR) is a natural alternative for depicting the impact of covariates on the conditional distributions of a outcome variable instead of the mean. In this paper, we investigate Bayesian regularized QR for the linear models with autoregressive errors. LASSO-penalized type priors are forced on regression coefficients and autoregressive parameters of the model. Gibbs sampler algorithm is employed to draw the full posterior distributions of unknown parameters. Finally, the proposed procedures are illustrated by some simulation studies and applied to a real data analysis of the electricity consumption. [ABSTRACT FROM AUTHOR]

In this paper, we proposed an alternative stochastic restricted Liu-type estimator for the vector of parameters in a linear regression model. The new estimator is a combination of ordinary mixed estimator and Liu-Type estimator , which was proposed by Liu. Necessary and sufficient conditions for the superiority of new stochastic restricted Liu-type estimator over the ordinary mixed estimator and the Liu-type estimator in the mean squared error matrix sense are derived for the two cases in which the parametric restrictions are correct and are not correct. In particular, we showed that was superior in the mean squared error matrix sense over both and to the Liu-type estimator introduced by Liu (2003). [ABSTRACT FROM AUTHOR]

In this paper, we obtain an adjusted version of the likelihood ratio (LR) test for errors-in-variables multivariate linear regression models. The error terms are allowed to follow a multivariate distribution in the class of the elliptical distributions, which has the multivariate normal distribution as a special case. We derive a modifiedLRstatistic that follows a chi-squared distribution with a high degree of accuracy. Our results generalize those in Melo and Ferrari (Advances in Statistical Analysis, 2010,94, pp. 75–87) by allowing the parameter of interest to be vector-valued in the multivariate errors-in-variables model. We report a simulation study which shows that the proposed test displays superior finite sample behavior relative to the standardLRtest. [ABSTRACT FROM PUBLISHER]

We establish strong consistency of the least squares estimates in multiple regression models discarding the usual assumption of the errors having null mean value. Thus, we required them to be i.i.d. with absolute moment of orderr, 01. Only moderately restrictive conditions are imposed on the model matrix. In our treatment, we use an extension of the Marcinkiewicz–Zygmund strong law to overcome the errors mean value not being defined. In this way, we get a unified treatment for the case of i.i.d. errors extending the results of some previous papers. [ABSTRACT FROM AUTHOR]

In this paper, we introduce two new classes of estimators called the stochastic restricted almost unbiased ridge-type principal component estimator (SRAURPCE) and the stochastic restricted almost unbiased Liu-type principal component estimator (SRAURPCE) to overcome the well-known multicollinearity problem in linear regression model. For the two cases when the restrictions are true and not true, necessary and sufficient conditions for the superiority of the proposed estimators are derived and compared, respectively. Furthermore, a Monte Carlo simulation study and a numerical example are given to illustrate the performance of the proposed estimators. [ABSTRACT FROM AUTHOR]

In this paper, the preliminary test approach to the estimation of the linear regression model with student'sterrors is considered. The preliminary test almost unbiased two-parameter estimator is proposed, when it is suspected that the regression parameter may be restricted to a constraint. The quadratic biases and quadratic risks of the proposed estimators are derived and compared under both null and alternative hypotheses. The conditions of superiority of the proposed estimators for departure parameter and biasing parameterskanddare derived, respectively. Furthermore, a real data example and a Monte Carlo simulation study are provided to illustrate some of the theoretical results. [ABSTRACT FROM PUBLISHER]

Different longitudinal study designs require different statistical analysis methods and different methods of sample size determination. Statistical power analysis is a flexible approach to sample size determination for longitudinal studies. However, different power analyses are required for different statistical tests which arises from the difference between different statistical methods. In this paper, the simulation-based power calculations ofF-tests with Containment, Kenward-Roger or Satterthwaite approximation of degrees of freedom are examined for sample size determination in the context of a special case of linear mixed models (LMMs), which is frequently used in the analysis of longitudinal data. Essentially, the roles of some factors, such as variance–covariance structure of random effects [unstructured UN or factor analytic FA0], autocorrelation structure among errors over time [independent IND, first-order autoregressive AR1 or first-order moving average MA1], parameter estimation methods [maximum likelihood ML and restricted maximum likelihood REML] and iterative algorithms [ridge-stabilized Newton-Raphson and Quasi-Newton] on statistical power of approximateF-tests in the LMM are examined together, which has not been considered previously. The greatest factor affecting statistical power is found to be the variance–covariance structure of random effects in the LMM. It appears that the simulation-based analysis in this study gives an interesting insight into statistical power of approximateF-tests for fixed effects in LMMs for longitudinal data. [ABSTRACT FROM AUTHOR]

The presence of outliers would inevitably lead to distorted analysis and inappropriate prediction, especially for multiple outliers in high-dimensional regression, where the high dimensionality of the data might amplify the chance of an observation or multiple observations being outlying. Noting that the detection of outliers is not only necessary but also important in high-dimensional regression analysis, we, in this paper, propose a feasible outlier detection approach in sparse high-dimensional linear regression model. Firstly, we search a clean subset by use of the sure independence screening method and the least trimmed square regression estimates. Then, we define a high-dimensional outlier detection measure and propose a multiple outliers detection approach through multiple testing procedures. In addition, to enhance efficiency, we refine the outlier detection rule after obtaining a relatively reliable non-outlier subset based on the initial detection approach. By comparison studies based on Monte Carlo simulation, it is shown that the proposed method performs well for detecting multiple outliers in sparse high-dimensional linear regression model. We further illustrate the application of the proposed method by empirical analysis of a real-life protein and gene expression data. [ABSTRACT FROM PUBLISHER]

The aim of this paper is to introduce a new method which corrects residual variances for the butterfly distributed residuals (BDR). Distribution theory, confidence intervals, and tests of hypotheses are valid and meaningful only if the standard regression assumptions are satisfied. Heteroskedasticity is one of the violations of these assumptions and BDR is another type of heteroskedasticity. This study reveals an alternative approach to correct the BDR type of heteroskedasticity by the weighting re-estimated absolute residuals (WRAR). After giving brief information about heteroskedasticity and BDR type of heteroskedasticity, WRAR is introduced. WRAR and the usual variance stabilizing techniques are compared on multiple and simple regression models. [ABSTRACT FROM AUTHOR]

In this paper, we investigate a mixture problem with two responses, which are functions of the mixing proportions, and are correlated with known dispersion matrix. We obtain D- and A-optimal designs for estimating the parameters of the response functions, when none or some of the regression coefficients of the two functions are the same. It is shown that when no prior knowledge about the regression coefficients is available, the D-optimal design is independent of the dispersion matrix, while the A-optimal design depends on it, provided the response functions are of different degree. On the other hand, when some of the regression coefficients are known to be the same for both the functions, the D-optimal design depends on the dispersion matrix when the two response functions are not of the same degree. [ABSTRACT FROM AUTHOR]

In this paper, we present a multivariate version of the skewed log-Birnbaum–Saunders regression model. This new family of distributions holds good properties such as marginal variables following univariate skewed log-Birnbaum–Saunders distributions, besides presenting the usual log-Birnbaum–Saunders distribution as a particular case. Furthermore, the model parameters are estimated through maximum-likelihood methods, a closed-form expression for the Fisher’s information matrix is presented, and testing hypothesis for model parameters is performed. Two real datasets are analyzed and results are discussed. [ABSTRACT FROM AUTHOR]

This paper discusses the problem of statistical inference in multivariate linear regression models when the errors involved are non normally distributed. We consider multivariatet-distribution, a fat-tailed distribution, for the errors as alternative to normal distribution. Such non normality is commonly observed in working with many data sets, e.g., financial data that are usually having excess kurtosis. This distribution has a number of applications in many other areas of research as well. We use modified maximum likelihood estimation method that provides the estimator, called modified maximum likelihood estimator (MMLE), in closed form. These estimators are shown to be unbiased, efficient, and robust as compared to the widely used least square estimators (LSEs). Also, the tests based upon MMLEs are found to be more powerful than the similar tests based upon LSEs. [ABSTRACT FROM PUBLISHER]

This paper deals with parameter estimation in the linear regression model and an almost unbiased two-parameter estimator is introduced. The performance of this new estimator over the ordinary least-squares estimator and the two-parameter estimator [M.R. Özkale and S. Kaçiranlar,The restricted and unrestricted two-parameter estimator, Comm. Statist. Theory Methods 36 (2007), pp. 2707–2725] in terms of scalar mean-squared error criterion is investigated and a simulation study is done. [ABSTRACT FROM AUTHOR]

Metabolic P (MP) grammars are a particular class of multiset rewriting grammars introduced in the MP theory for modelling metabolic processes. In this paper, a new algebraic formulation of inverse problems, based on MP grammars and Kronecker product, is given, for further motivating the correctness of the LGSS (Log-Gain Stoichiometric Stepwise) algorithm, introduced in 2010s for solving inverse problems in the MP framework. At the end of the paper, a section is included that introduces the problem of multicollinearity, which could arise during the execution of LGSS, and that defines an algorithm, based on a hierarchical clustering technique, that solves it in a suitable way. [ABSTRACT FROM PUBLISHER]

In the polynomial regression of a given degree m, the unique G-optimal design is well known. However, in practice, m is hardly ever exactly known. In this aspect, the arcsin design, which does not require the knowledge of m, is very efficient, because it is almost optimal in the interior of the interval [−1, 1]. On the other hand, the standardized variance at the end-points using the arcsin design is almost twice bigger than that using the optimal design. In this paper, we introduce the modified arcsin design which improves the arcsin design by giving more weight to the end-points. The standardized variance of it is found analytically. It is also shown that for sufficiently small α, it reduces the maximum standardized variance roughly by 46% asymptotically (as m→∞), compared with the arcsin design. [ABSTRACT FROM AUTHOR]

In this paper, the notion of the general linear estimator and its modified version are introduced using the singular value decomposition theorem in the linear regression model y=X β+e to improve some classical linear estimators. The optimal selections of the biasing parameters involved are theoretically given under the prediction error sum of squares criterion. A numerical example and a simulation study are finally conducted to illustrate the superiority of the proposed estimators. [ABSTRACT FROM PUBLISHER]

In this paper, we introduce two kinds of new restricted estimators called restricted modified Liu estimator and restricted modified ridge estimator based on prior information for the vector of parameters in a linear regression model with linear restrictions. Furthermore, the performance of the proposed estimators in mean squares error matrix sense is derived and compared. Finally, a numerical example and a Monte Carlo simulation are given to illustrate some of the theoretical results. [ABSTRACT FROM AUTHOR]

In this paper, we translate variable selection for linear regression into multiple testing, and select significant variables according to testing result. New variable selection procedures are proposed based on the optimal discovery procedure (ODP) in multiple testing. Due to ODP’s optimality, if we guarantee the number of significant variables included, it will include less non significant variables than marginalp-value based methods. Consistency of our procedures is obtained in theory and simulation. Simulation results suggest that procedures based on multiple testing have improvement over procedures based on selection criteria, and our new procedures have better performance than marginalp-value based procedures. [ABSTRACT FROM AUTHOR]

In this paper, we propose a lower bound based smoothed quasi-Newton algorithm for computing the solution paths of the group bridge estimator in linear regression models. Our method is based on the quasi-Newton algorithm with a smoothed group bridge penalty in combination with a novel data-driven thresholding rule for the regression coefficients. This rule is derived based on a necessary KKT condition of the group bridge optimization problem. It is easy to implement and can be used to eliminate groups with zero coefficients. Thus, it reduces the dimension of the optimization problem. The proposed algorithm removes the restriction of groupwise orthogonal condition needed in coordinate descent and LARS algorithms for group variable selection. Numerical results show that the proposed algorithm outperforms the coordinate descent based algorithms in both efficiency and accuracy. [ABSTRACT FROM AUTHOR]

In a mixture experiment, the response depends on the mixing proportions of the components present in the mixture. Optimum designs are available for the estimation of parameters of the models proposed in such situations. However, these designs are found to include the vertex points of the simplex Ξ defining the experimental region, which are not mixtures in the true sense. Recently, Mandal et al. (2015) derived optimum designs when the experiment is confined to an ellipsoidal region within Ξ, which does not include the vertices of Ξ. In this paper, an attempt has been made to find optimum designs when the experimental region is a simplex or is cuboidal inside Ξ and does not contain the extreme points. [ABSTRACT FROM PUBLISHER]

Multiple linear regression models are frequently used in predicting unknown values of the response variabley. In this case, a regression model's ability to produce an adequate prediction equation is of prime importance. This paper discusses the predictive performance of ther-kandr-dclass estimators compared to ordinary least squares (OLS), principal components, ridge regression and Liu estimators and between each other. The theoretical results are illustrated using Portland cement data and a region is established where ther-kand ther-dclass estimators are uniformly superior to the other mentioned estimators. [ABSTRACT FROM AUTHOR]

In this paper, we introduce a new restricted two-parameter (RTP) estimator for the vector of parameters in a linear model when additional linear restrictions on the parameter vector are assumed to hold. We show that our new biased estimator is superior in the matrix mean square error criterion to the restricted ridge estimator proposed by Groß (2003), restricted Liu estimator introduced by Kaçiranlar et al. (1999), and RTP estimator introduced by Özkale and Kaçiranlar (2007). A numerical example and a Monte Carlo simulation have been analyzed to illustrate some of the theoretical results. [ABSTRACT FROM PUBLISHER]

In this paper we introduce the exponentiated Fréchet regression for modelling positive responses having a long-tailed distribution in a regression model, which are common in actuarial statistics. We propose two parameterizations each of which links the regression parameters with the explanatory variables. We then discuss the maximum likelihood estimation of the parameters both theoretically and empirically. In order to meet the needs of an actuary, closed-form expressions for certain risk measures for the exponentiated Fréchet distribution are also derived. We employ the proposed model to a motorcycle claim size data set. [ABSTRACT FROM AUTHOR]