Search

Problem-solving is a key engineering skill, yet is an area in which engineering graduates underperform. This paper investigates the potential of using web-based tools to teach students problem-solving techniques without the need to make use of class time. An idea generation experiment involving 90 students was designed. Students were surveyed about their study habits and reported they use electronic-based materials more than paper-based materials while studying, suggesting students may engage with web-based tools. Students then generated solutions to a problem task using either a paper-based template or an equivalent web interface. Students who used the web-based approach performed as well as students who used the paper-based approach, suggesting the technique can be successfully adopted and taught online. Web-based tools may therefore be adopted as supplementary material in a range of engineering courses as a way to increase students’ options for enhancing problem-solving skills. [ABSTRACT FROM PUBLISHER]

This paper explores how four young women narrated accounts of their interactions with their male peers in the engineering classroom. Drawing on data collected in a qualitative case study conducted at one high-performing English university, this paper details how the four women described two different versions of laddish masculinity evident within their engineering classroom; a hostile laddish masculinity, and a 'friendly' or 'genial' upper/middle-class laddish masculinity. Whilst the hostile lads were seemingly frowned upon and socially excluded, the 'friendly' or 'genial' upper/middle-class lads appeared largely liked and tolerated by the women. This paper thus adds to our understanding of women's current experiences in engineering education, and works to extend research in the area of laddism in formalized learning contexts in higher education (HE). In particular, this paper draws attention to the existence of subtle or nuanced degrees of laddism in engineering at the university under study, and highlights a possible relationship between 'lad' discourses and gendered disciplinary discourses. [ABSTRACT FROM AUTHOR]

The purpose of this work is to contribute to the debate on the best pedagogical approach to developing undergraduate mechanical engineering skills to meet the requirements of contemporary complex working environments. The paper provides an example of using student–entrepreneur collaboration in the teaching of modules to Mechanical Engineering final-year students. Problem-based learning (PBL) is one of the most significant recent innovations in the area of education for the professions. This work proposes to make an original contribution by simulating a real-life entrepreneur interaction for the students. The current literature largely confines simulation-based learning to computer applications such as games. However, this paper argues that role playing by students interfacing with technology start-ups can also be regarded as ‘simulation’ in a wider sense. Consequently, the paper proposes the concept of simulation-action learning as an enhancement of PBL and to distinguish it from computer simulation. [ABSTRACT FROM PUBLISHER]

Studies exploring what it means to be an engineer professionally have been conducted for decades, but have boomed in recent years. This systematic literature review aims to organise extant studies on engineering identity by coding around four key variables: (a) definitions of engineering identity, (b) factors affecting engineering identity development, (c) interventions affecting engineering identity development, and (d) means of measuring identity. In doing so, this review provides strategies for future research and educational interventions to advance work related to engineering identity. Publications were selected for inclusion by screening and appraising results obtained from databases and keywords refined through a scoping study. Derived from key findings, suggestions for future research include bridging disparate strands of engineering identity literature and incorporating more varied methodological approaches. Also from key findings, suggestions for future practice involve better connecting existing definitions of engineering identity and factors known to affect identity development with identity-related interventions. [ABSTRACT FROM AUTHOR]

Professional bodies expect engineers to show competence in both mathematics and engineering topics such as mechanics, using their abilities in both of these to solve problems. Yet within engineering programmes there is a phenomenon known as ‘The Mathematics Problem’, with students not demonstrating understanding of the subject. This paper will suggest that students are constructing different concept images in engineering and mathematics, based on their perception of either the use or exchange-value for the topics. Using a mixed methods approach, the paper compares 10 different types of concept image constructed by students, which suggests that familiar procedural images are preferred in mathematics. In contrast strategic and conceptual images develop for mechanics throughout the years of the programme, implying that different forms of competence are being constructed by students between the two subjects. The paper argues that this difference is attributed to the perceived use-value of mechanics in the career of the engineer, compared to the exchange-value associated with mathematics. Questions are raised about the relevance of current definitions of competence given that some routine mathematical operations previously performed by engineers are now being replaced by technology, in the new world of work. [ABSTRACT FROM PUBLISHER]

It is known that assessment drives learning and hence a good assessment design is key to effective student development. This paper gives some case studies in effective assessment strategies within engineering. The main contribution is to demonstrate how one can simultaneously meet a number of requirements with individual assessments and therefore be efficient in both the student and staff assessment load. The paper also proposes that assessments should be challenging and the benefits of expecting students to rise to this challenge and also how one can meet many independent learning objectives in a single assignment in order to manage the overall assessment load for staff and students. [ABSTRACT FROM AUTHOR]

Laboratories are generally regarded as critical to engineering education, and yet educational institutions face significant challenges in developing and maintaining high-quality laboratory facilities. Remote laboratories are increasingly being explored as a partial solution to this challenge, with research showing that – for the right learning outcomes – they can be viable adjuncts or alternatives to conventional hands-on laboratories. One consequential opportunity arising from the inherent support for distributed access is the possibility of cross-institutional shared facilities. While both technical feasibility and pedagogic implications of remote laboratories have been well studied within the literature, the organisational and logistical issues associated with shared facilities have received limited consideration. This paper uses an existing national-scale laboratory sharing initiative, along with a related survey and laboratory sharing data, to analyse a range of factors that can affect engagement in laboratory sharing. The paper also discusses the implications for supporting ongoing laboratory sharing. [ABSTRACT FROM PUBLISHER]

‘Career Academics’ are principally research-led, entering academia with limited or no industrial or practical experience. UK Higher Education Institutions welcome them for their potential to attain research grant funding and publish world-leading journal papers, ultimately enhancing institutional reputation. This polemical paper problematises the Career Academic around three areas: their institutional appeal; their impact on the student experience, team dynamics and broader academic functions; and current strategic policy to employ them. We also argue that recent UK Government teaching-focused initiatives will not address needs to employ practical academics, or ‘Pracademics’ in predominantly vocational Construction and Engineering Education. We generate questions for policy-makers, institutions and those implementing strategy. We argue that research is key, but partial rebalancing will achieve a diverse academic skill base to achieve contextualised construction and engineering education. In wider European contexts, the paper resonates with issues of academic ‘drift’ and provides reflection for others on the UK context. [ABSTRACT FROM PUBLISHER]

In the twenty-first century, meeting our technological challenges demands educational excellence, a skilled populace that is ready for the critical challenges society faces. There is widespread consensus, however, that education systems are failing to adequately prepare all students with the essential twenty-first century knowledge and skills necessary to succeed in life, career, and citizenship. The purpose of this paper is to understand how twenty-first century knowledge and skills can be appropriately embedded in engineering education finalised to innovative product development by using additive manufacturing (AM). The study designs a learning model by which to achieve effective AM education to address the requirements of twenty-first century and to offer students the occasion to experiment with STEM (Science, technology, engineering, and mathematics) concepts. The study is conducted using the quality function deployment (QFD) methodology. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include offering faculty the opportunity to work outside academia. [ABSTRACT FROM AUTHOR]

This paper questions if engineering educators are producing engineers that are accelerating humanity along an unsustainable path. Even though technology and engineering are important drivers in trying to move humanity towards an environmentally sustainable paradigm, the paper suggests that maybe the most important levers and challenges lie in the economic and social domains. Short case studies of energy efficiency, the experience of the industrialist Ray Anderson and the authors own reflection of teaching chemical engineering students are used to highlight this. Engineering/technological innovation may not be enough and is often counteracted by the rebound effect and the current dominant neoclassical economic paradigm. The paper discusses what engineering educators can do to produce sustainability informed engineers who are better able to engage with the economic and social dimensions of sustainability. Some suggestions for engaging engineering students with the economic and social dimensions of environmental sustainability are provided. Engineers must somehow find ways, not just to influence technological levers (which are very important) but also to influence economic and social levers so that changes in economic and social behaviours can complement and facilitate technological change in moving humanity to an environmentally sustainable paradigm. [ABSTRACT FROM AUTHOR]

For a structural engineer, effective communication and interaction with architects cannot be underestimated as a key skill to success throughout their professional career. Structural engineers and architects have to share a common language and understanding of each other in order to achieve the most desirable architectural and structural designs. This interaction and engagement develops during their professional career but needs to be nurtured during their undergraduate studies. The objective of this paper is to present the strategies employed to engage higher order thinking in structural engineering students in order to help them solve complex problem-based learning (PBL) design scenarios presented by architecture students. The strategies employed were applied in the experimental setting of an undergraduate module in structural engineering at Queen’s University Belfast in the UK. The strategies employed were active learning to engage with content knowledge, the use of physical conceptual structural models to reinforce key concepts and finally, reinforcing the need for hand sketching of ideas to promote higher order problem-solving. The strategies employed were evaluated through student survey, student feedback and module facilitator (this author) reflection. The strategies were qualitatively perceived by the tutor and quantitatively evaluated by students in a cross-sectional study to help interaction with the architecture students, aid interdisciplinary learning and help students creatively solve problems (through higher order thinking). The students clearly enjoyed this module and in particular interacting with structural engineering tutors and students from another discipline. [ABSTRACT FROM PUBLISHER]

The School of Engineering at Universidad Europea de Madrid (UEM) implemented, starting in the 2012–2013 period, a unified academic model based on project-based learning as the methodology used throughout the entire School. This model expects that every year, in each grade, all the students should participate in a capstone project integrating the contents and competencies of several courses. This paper presents the academic context under which this experience has been implemented, and a summary of the work done to design and implement the Project-Based Engineering School at the UEM. The steps followed, the structure used, some sample projects, as well as the difficulties and benefits of implementing the programme are discussed in this paper. The results are encouraging as students are more motivated and the initial set objectives were accomplished. [ABSTRACT FROM PUBLISHER]

Employer complaints of engineering graduate inability to 'apply knowledge' suggests a need to interrogate the complex theory-practice relationship in twenty-first century real world contexts. Focussing specifically on the application of mathematics, physics and logic-based disciplinary knowledge, the research examines engineering problem-solving processes as enacted by recent graduates in a range of industrial settings. Theoretically situated in the sociology of education, the Bernsteinian concept of knowledge structures and Legitimation Code Theory epistemic relations are utilised to surface the disciplinary basis of problem solving in different sociotechnical contexts. It is argued that the relationship between the 'what' and the 'how' of the problem gives rise to significantly different practice 'codes' between which successful engineering problem-solvers are required to shift. This paper presents two contrasting case studies which demonstrate the impact of the environment on code-shifting practices. Findings suggest that engineering curricula need to facilitate a more conceptual grasp of contextual complexities. [ABSTRACT FROM AUTHOR]

In this paper, we present a teaching proposal used in an Introductory Physics course to civil engineering students from Porto's Engineering Institute/Instituto Superior de Engenharia do Porto (ISEP). The proposal was born from the need to change students’ perception and motivation for learning physics. It consists in the use of an integrator element, called the physics elevator project. This integrator element allows us to use, in a single project, all the content taught in the course and uses several active learning strategies. In this paper, we analyse this project as: (i) a clarifying element of the contents covered in the course; (ii) a promoter element of motivation and active participation in class and finally and (iii) a link between the contents covered in the course and the ‘real world’. The data were collected by a questionnaire and interviews to students. From the data collected, it seems that the integrator element improves students’ motivation towards physics and develops several skills that they consider to be important to their professional future. It also acts as a clarifying element and makes the connection between the physics that is taught and the ‘real world’. [ABSTRACT FROM PUBLISHER]

Technical communication and technical writing are important skills for the daily work-life of every engineer. In the first-year engineering programme at KU Leuven, a technical writing programme is implemented within the project-based course ‘Problem Solving and Engineering Design’. This paper describes a case study for implementing a writing programme based on active learning methods and situated learning in large classes. The programme consists of subsequent cycles of instructions, learning by doing and reflection on received feedback. In addition, a peer-review assignment, together with an interactive lecture using clicking devices, is incorporated within the assignments of the second semester. A checklist of desired writing abilities makes it easier to grade the large number of papers. Furthermore, this ensures that all staff involved in the evaluation process uses the same criteria to grade and for providing feedback. [ABSTRACT FROM PUBLISHER]

Advanced control concepts present a teaching challenge, where even at master level students benefit from these concepts being implemented and demonstrated on real hardware, rather than simply modelling the plant, applying control strategy and tuning. This paper describes one of a series of three experiments demonstrating the implementation of different control strategies using adaptive cruise control (ACC) on robot models and real robots. The experiment described here utilises the model predictive control (MPC) strategy implemented in ACC. The algorithm is realised using the graphical programming language (LabVIEW) as the design environment and National Instruments Robotics Starter Kit robot as the target hardware, with the code being deployed on a field programmable gate array (FPGA), included in the robot's architecture. Two robotic vehicles, 'the leader' and 'the follower' are programmed to execute ACC: the velocity of the leader robot and the distance between the robots are augmented into the robot's state-space equation, to design the controller (MPC), which was then tuned for both velocity and distance tracking modes. The experiment offers a novel idea on how to deliver this advanced control strategy in an applied and visual manner with laboratory experimentation supporting the theoretical aspects of learning. It brings to life some often stated theoretical qualities of an MPC controller, including quick rise time, minor fluctuation and a small distance tracking error, in line with current scientific papers. Thus, it demonstrates to students a clear correlation between theoretical expectations and real-life system performance whilst challenging their ability to work with real hardware. [ABSTRACT FROM AUTHOR]

This paper focuses on the production and use of learning resources within an engineering curriculum that support the development of independent learners. The most important contribution is to propose pragmatic learning approaches which improve the student learning experience and reward their engagement. The paper gives evidence that the introduction of new learning resources and approaches need not be labour intensive, expensive or complicated and thus be both cost effective and straightforward to implement, creating a win/win scenario for the staff and students. Several examples of novel learning resources and approaches developed by the author for use within an engineering curricula are presented and evaluated. [ABSTRACT FROM AUTHOR]

This paper is a case study on the use of active learning techniques in an upper-level engineering course at the Helsinki University of Technology. The paper describes how these techniques were introduced and successfully used within the Finnish university classroom. The cultural subtext is explored and attention is given to teaching techniques that are easily integrated into a standard lecture setting. The results of this case study were determined by quantitative and qualitative student data gathered via a structured self-assessment of learning. The qualitative data in the form of written reflections provided rich insights into the efficacy of the teaching techniques and the learning environment. Instructor observations about class attendance, the activating power of group work and the impact of classroom infrastructure are included in this paper. [ABSTRACT FROM AUTHOR]

Many approaches to make mathematics relevant to first-year engineering students have been described. These include teaching practical engineering applications, or a close collaboration between engineering and mathematics teaching staff on unit design and teaching. In this paper, we report on a novel approach where we gave higher year engineering and multimedia students the task to ‘make maths relevant’ for first-year students. This approach is novel as we moved away from the traditional thinking that staff should produce these resources to students producing the same. These students have more recently undertaken first-year mathematical study themselves and can also provide a more mature student perspective to the task than first-year students. Two final-year engineering students and three final-year multimedia students worked on this project over the Australian summer term and produced two animated videos showing where concepts taught in first-year mathematics are applied by professional engineers. It is this student perspective on how to make mathematics relevant to first-year students that we investigate in this paper. We analyse interviews with higher year students as well as focus groups with first-year students who had been shown the videos in class, with a focus on answering the following three research questions: (1) How would students demonstrate the relevance of mathematics in engineering? (2) What are first-year students' views on the resources produced for them? (3) Who should produce resources to demonstrate the relevance of mathematics? There seemed to be some disagreement between first- and final-year students as to how the importance of mathematics should be demonstrated in a video. We therefore argue that it should ideally be a collaboration between higher year students and first-year students, with advice from lecturers, to produce such resources. [ABSTRACT FROM PUBLISHER]

The world is changing significantly, and it is becoming increasingly globalised. This means that countries, businesses, and professionals must think and act globally to be successful. Many individuals, however, are not prepared with the global competency skills needed to communicate and perform effectively in a globalised system. To address this need, higher education institutions are looking for ways to instil these skills in their students. This paper explains one promising approach using current learning principles: transnational interactive online environments in engineering education. In 2011, the TU Dortmund and the University of Virginia initiated a collaboration in which engineering students from both universities took part in one online synchronous course and worked together on global topics. This paper describes how the course was designed and discusses specific research results regarding how interactive online role-playing simulations support students in gaining the global competency skills required to actively participate in today's international workforce. [ABSTRACT FROM PUBLISHER]

This paper reports on the development of metalearning capacity in the learning of athreshold concept– capacity of transformative significance relative to metalearning in the general response context of a discipline or subject. The development of metalearning capacity is framed within a protocol that invites students to self-construct a ‘learning profile’ of themselves; reflect on it in light of theoretical considerations; and accordingly self-initiate changes to their learning behaviour. Findings are consistent with other studies in different disciplinary contexts that employed the same methodology – namely, that metalearning activity can be successfully focused on a particular threshold concept to benefit a substantial majority of students in a variety of ways ranging across a positive reinforcement of self, a change in conception of what ‘learning is’, to self-initiated change. Metalearning activity is advocated as a theoretically sound, and pedagogically driven, learning intervention – one that adds value to the student learning experience. [ABSTRACT FROM PUBLISHER]

Emissions reductions targets for the UK set out in the Climate Change Act for the period to 2050 will only be achieved with significant changes to the built environment, which is currently estimated to account for 50% of the UK's carbon emissions. The socio-technological nature of Civil Engineering means that this field is uniquely placed to lead the UK through such adaptations. This paper discusses the importance of interdisciplinary teaching to produce multi-faceted team approaches to sustainable design solutions. Methods for measuring success in education are often not fit for purpose, producing good students but poor engineers. Real-world failures to apply sustainable design present a serious, difficult to detect, and ultimately economically negative situation. Techniques to replace summative examinations are presented and discussed, with the aim of enhancing core technical skills alongside those required for sustainable design. Finally, the role of our future engineers in policy-making is discussed. In addition to carbon, the provision of water and food will heavily influence the work of civil engineers in the coming decades. Leadership from civil engineers with the technical knowledge and social awareness to tackle these issues will be required. This provides both opportunities and challenges for engineering education in the UK. [ABSTRACT FROM PUBLISHER]

Mathematics has long been known to be problematic for university engineering students and their teachers, for example, Scanlan.[1] This paper presents recent data gathered from interviews with engineering students who experienced problems with mathematics and their lecturers during their transition through the first year in different programme contexts. Our interviews with the students reveal how they understand the relation between engineering and mathematics and we draw on the concept of ‘use- and exchange-value’ to explore this relationship more fully. This paper challenges both the pedagogical practice of teaching non-contextualized mathematics and the lack of transparency regarding the significance of mathematics to engineering. We conclude that the value of mathematics in engineering remains a central problem, and argue that mathematics should be a fundamental concern in the design and practice of first-year engineering. [ABSTRACT FROM PUBLISHER]

This paper reports on a project in which students designed, constructed and tested a model of an existing early warning system with simulation of debris flow in a context of a landslide. Students also assessed rural community members’ knowledge of this system and subsequently taught them to estimate the time needed for evacuation of the community in the event of a landslide. Participants were four undergraduate students in a civil engineering programme at a university in Thailand, as well as nine community members and three external evaluators. Results illustrate project and problem-based, experiential learning and highlight the real-world applications and development of knowledge and of hard and soft skills. The discussion raises issues of scalability and feasibility for implementation of these types of projects in large undergraduate engineering classes. [ABSTRACT FROM PUBLISHER]

Introductory engineering courses are either programme specific or expose students to engineering as a broad discipline by including materials from various engineering programmes. A common introductory engineering course that spans different engineering programmes raises challenges, including the high cost of resources as well as the lack of background courses of first-year students. This paper presents the design, implementation and evaluation of a first-year common engineering course that uses low-cost materials to expose students to a structured engineering design process. The course is explicitly designed to satisfy the Accreditation Board for Engineering and Technology criteria for engineering programmes. Our experience with the course shows that not only students are able to follow a structured design process successfully but we also believe that most of the ABET criteria are being delivered through the course. [ABSTRACT FROM PUBLISHER]

In the Iranian higher education system, including engineering education, effective implementation of cooperative learning is difficult because classrooms are usually crowded and the students never had a formal group working background in their previous education. In order to achieve the benefits of cooperative learning in this condition, this paper proposes a combination of cooperative learning and inquiry method. The method is implemented by grouping students in a way that the learning procedure is done in non-official class sessions by each group, while the inquiry method is done in the regular programmed class sessions. The study is performed in Islamic Azad University and the methods are implemented in two engineering economic classes with different numbers of students in each working group. The results are compared with a control class in which traditional teaching style is implemented. The results of analysis show simultaneous improvement of learning and behavioural attitudes of the students with cooperative learning plus inquiry method in the classroom with a fewer number of students in each working group. [ABSTRACT FROM AUTHOR]

This article presents a case study of the peer review process for a feminist article submitted to an engineering education journal. It demonstrates how an examination of peer review can be a useful approach to further understanding the development of feminist thought in education fields. Rather than opposition to feminist thought per se, my experience reveals that opposing beliefs about what a feminist contribution to engineering education entails pose a challenge to those aiming to engage with feminist thought. [ABSTRACT FROM AUTHOR]

Previously the author described how control engineering can be introduced using little mathematics in a first year course, the aim being to make the subject accessible across different degrees. One reaction to this was that it was a good idea, but there was not space to include it in the curriculum where, typically control engineering is not introduced until the second year. This paper describes how the author has used a review of the first year teaching to develop a module in which feedback, control and electronics are integrated coherently. This is beneficial as concepts in control and electronics mutually reinforce each other. This has been achieved during a reduction in the available time for teaching the material. This paper describes the strategy used to successfully develop the module, the integrated module and positive student reaction. [ABSTRACT FROM AUTHOR]

We will present a case study result from a cross-disciplinary education called Medialogy, which is taught in the Technical and Science Faculty at Aalborg University. The aim of Medialogy is to facilitate creativity within technical solutions. The intention of this paper is to answer the following: how do the Medialogy teachers perceive creativity and how do they facilitate it? Many of the answers point to the pedagogical approach used in problem-based learning, which are perceived as an important element for the creative process. In this paper we will also argue the importance of including the social context (both at a macro and at a micro level) in the definition and use of creativity in engineering education. [ABSTRACT FROM AUTHOR]

This paper discusses the use and impact of formative feedback and scaffolding to develop outcomes for complex problem solving in a required first-year course in engineering design and practice at a medium-sized research-intensive Canadian university. In 2010, the course began to use team-based, complex, open-ended contextualised problems to develop problem solving, communications, teamwork, modelling, and professional skills. Since then, formative feedback has been incorporated into: task and process-level feedback on scaffolded tasks in-class, formative assignments, and post-assignment review. Development in complex problem solving and modelling has been assessed through analysis of responses from student surveys, direct criterion-referenced assessment of course outcomes from 2013 to 2015, and an external longitudinal study. The findings suggest that students are improving in outcomes related to complex problem solving over the duration of the course. Most notably, the addition of new feedback and scaffolding coincided with improved student performance. [ABSTRACT FROM AUTHOR]

Building Information Modelling (BIM) tools and processes are increasingly adopted and implemented in the construction industry. Consequently, BIM education is considered increasingly important in Architecture, Engineering and Construction (AEC) education. While most of the research and literature on BIM education in engineering studies has focused on BIM implementation strategies, processes, benefits, and challenges, there is limited study on students’ perception towards the implementation of BIM courses, or about online BIM learning platforms, or about the BIM tools themselves. Therefore, this paper takes the first steps towards addressing this gap. This study analyses students’ (57 students) perception and sentiments towards the use of an online BIM learning platform and explores the potential implications of the findings for BIM education. The findings suggest that online BIM learning platforms are highly rated by students as a positive learning experience, indicating the need for greater integration of such tools and approaches in AEC courses. [ABSTRACT FROM AUTHOR]

An increasingly desired outcome of engineering education is the ability to engage in self-regulated learning (SRL). One promising method for the formative assessment of SRL is the reflective diary. There is, however, a paucity of research on the use of reflective diaries in engineering education. To mitigate this gap, we report on a case study where reflective diaries were implemented in a master’s course on tissue engineering. The objective of this paper is to explore the potential of reflective diaries for the formative assessment of three central aspects of SRL: conceptions of knowledge, conceptions of learning, and strategies for monitoring and regulating learning. Based on a theoretical thematic analysis of the diary entries, we show that reflective diaries can be used to assess these three aspects of SRL. We discuss ways of providing feedback to students, with a focus on dialogic feedback. [ABSTRACT FROM AUTHOR]

Although engineering education research has empirically validated the effectiveness of active learning in improving student learning over traditional lecture-based methods, the adoption of active learning in classrooms has been slow. One of the greatest reported barriers is student resistance towards engagement in active learning exercises. This paper argues that the level of student engagement in active learning classrooms is an interplay of social and physical classroom characteristics. Using classroom observations and instructor interviews, this study describes the influence of the interaction of student response systems and classroom layout on student engagement in two large active-learning-based engineering classrooms. The findings suggest that the use of different student response systems in combination with cluster-style seating arrangements can increase student engagement in large classrooms. [ABSTRACT FROM AUTHOR]

Problem-based learning (PBL) has proven to be highly effective for educating students in an active and self-motivated manner in various disciplines. Student projects carried out following PBL principles are very dynamic and carry a high level of uncertainty, both conditions under which agile project management approaches are assumed to be highly supportive. The paper describes an empirical case study carried out at Aalborg University Copenhagen involving students from two different semesters of a Bachelor of Science programme. While executing the study, compelling examples of how PBL and the agile project management method Kanban blend could be identified. A final survey reveals that applying Kanban produces noticeable improvements with respect to creating, assigning and coordinating project tasks. Other improvements were found in group communication, knowledge about the work progress with regards to both the individual and the collective and the students’ way of continuously improving their own teamwork. [ABSTRACT FROM PUBLISHER]

Incorporation of student self-assessment (SSA) in engineering education offers opportunities to support and encourage learner-led-learning. This paper presents an innovative assessment paradigm that integrates formative, summative, and SSA to enhance student learning. The assessment innovation was implemented in a senior-level civil engineering design course. Direct evidence of the impact of employing this innovation on student learning and achievement was derived by monitoring student academic performance in direct assessment tasks throughout the semester. Students’ feedback demonstrated the effectiveness of this innovation to improve their understanding of course topics build their autonomy, independent judgement, and self-regulated learning skills. [ABSTRACT FROM PUBLISHER]

Minimal research papers have investigated the use of student evaluations on the laboratory, a learning medium usually run by teaching assistants with little control of the content, delivery and equipment. Finding the right mix of teaching assistants for the laboratory can be an onerous task due to the many skills required including theoretical and practical know-how, troubleshooting, safety and class management. Using larger classes with multiple teaching assistants, a team-based teaching (TBT) format may be advantageous. A rigorous three-year study across twenty-five courses over repetitive laboratory classes is analysed using a multi-level statistical model considering students, laboratory classes and courses. The study is used to investigate the effectiveness of the TBT format, and quantify the influence each demonstrator has on the laboratory experience. The study found that TBT is effective and the lead demonstrator most influential, influencing up to 55% of the laboratory experience evaluation. [ABSTRACT FROM AUTHOR]

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates. [ABSTRACT FROM AUTHOR]

One of the most elementary concepts in freshmen Electrical Engineering subject comprises the Resistance–Inductance–Capacitance (RLC) circuit fundamentals, that is, their time and frequency domain responses. For a beginner, generally, it is difficult to understand and appreciate the step and the frequency responses, particularly the resonance. This paper proposes a student-friendly teaching and learning approach by inculcating the multifaceted versatile software LabVIEWTM along with the educational laboratory virtual instrumentation suite hardware, for studying the RLC circuit time and frequency domain responses. The proposed approach has offered an interactive laboratory experiment where students can model circuits in simulation and hardware circuits on prototype board, and then compare their performances. The theoretical simulations and the obtained experimental data are found to be in very close agreement, thereby enhancing the conviction of students. Finally, the proposed methodology was also subjected to the assessment of learning outcomes based on student feedback, and an average score of 8.05 out of 10 with a standard deviation of 0.471 was received, indicating the overall satisfaction of the students. [ABSTRACT FROM AUTHOR]

A unified academic model based on the project-based learning (PBL) methodology was implemented, in the 2012–2013 period, in the School of Engineering at Universidad Europea de Madrid. The purpose of this paper is to explore whether teachers and students participating in the capstone projects feel that the objectives for which this methodology was designed for are being achieved. The data were collected through interviews to participants at the end of the PBL experience. The results are encouraging, as students seem to be more motivated, and they say that they are experiencing deeper learning, and have developed key competitive skills required for their professional lives. Findings also suggest that teachers face positively the PBL as a learning approach since they perceive that students obtain a deeper learning, develop transversal skills with the projects and are more engaged with their studies. Implications and recommendations for the future of the model are also discussed. [ABSTRACT FROM PUBLISHER]

This paper reports the results of a study of engineering students’ approaches to an open-ended design problem. To carry out this, sketches and interviews were collected from 9 freshmen (first year) and 10 doctoral engineering students, when they designed solutions for orange squeezers. Sketches and interviews were analysed and mapped with a descriptive ‘ideation framework’ (IF) of the design process, to document and compare their design creativity (Carmona Marques, P., A. Silva, E. Henriques, and C. Magee. 2014. “A Descriptive Framework of the Design Process from a Dual Cognitive Engineering Perspective.”International Journal of Design Creativity and Innovation2 (3): 142–164). The results show that the designers worked in a manner largely consistent with the IF for generalisation and specialisation loops. Also, doctoral students produced more alternative solutions during the ideation process. In addition, compared to freshman, doctoral used the generalisation loop of the IF, working at higher levels of abstraction. The iterative nature of design is highlighted during this study – a potential contribution to decrease the gap between both groups in engineering education. [ABSTRACT FROM PUBLISHER]

University science outreach programmes are used to encourage more school students to select science, technology, engineering, and mathematics (STEM) subjects in further education and pursue science-related careers. The benefits of science outreach programmes are often espoused from the perspective of programme participants. Little attention, however, is given to what university students delivering the programmes gain from the experience. This paper seeks to illustrate the benefits of engineering students delivering STEM outreach programmes in schools. It reports on a qualitative case study of the experiences of two STEM Education and Outreach team members from a regional university in Australia. Content analysis of interview data highlighted not only the participants’ motivations and perceived benefits of being involved in the STEM programme but also revealed the skills and attributes honed throughout the experience. Involvement in the STEM outreach programme resulted in the development of social and personal responsibility generic graduate attribute skills, evidenced through their motivations to be involved, the demonstration of understanding of teaching and learning, and application of science communication skills. This study demonstrates that designing and delivering STEM outreach programmes assists in the development of skills that will be beneficial when pursuing careers in engineering in the future. [ABSTRACT FROM PUBLISHER]

Design is a crucial element of engineering education. The mode of learning design techniques and knowledge is key to the relationship that students gain with this subject. In the School of Mechanical and Systems Engineering at Newcastle University modules in Design and Manufacturing are taught in the first and second year. This paper outlines the transition of the Year 2 Design and Manufacturing module from a paper-based exercise to a design-build-test project-based group exercise over a period of three years between 2007/08 and 2009/10, using an iterative process of student feedback to advise this process of module change. Through this evaluation five key elements were identified, which inform the process of the introduction of practical group working in an engineering setting - these are presented as having utility for engineering education in general. Two conclusions derived from the analysis are also outlined, together with their implications for the engineering higher education sector. [ABSTRACT FROM AUTHOR]

Could the challenge of mastering threshold concepts be a potential factor that influences a student's decision to continue in electronics engineering? This was the question that led to a collaborative research project between educational researchers and the Faculty of Engineering in a New Zealand university. This paper deals exclusively with the qualitative data from this project, which was designed to investigate the high attrition rate of students taking introductory electronics in a New Zealand university. The affordances of the various teaching opportunities and the barriers that students perceived are examined in the light of recent international research in the area of threshold concepts and transformational learning. Suggestions are made to help students move forward in their thinking, without compromising the need for maintaining the element of intellectual uncertainty that is crucial for tertiary teaching. The issue of the timing of assessments as a measure of conceptual development or the crossing of thresholds is raised. [ABSTRACT FROM PUBLISHER]

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now come with a diverse background of skills, motivations and prior knowledge. It is imperative that new methods of teaching and learning be developed. This paper describes an online tutorial system used in conjunction with contextual physics and mathematics, and the revision of the relevant mathematical knowledge at the appropriate time before a new topic is introduced in the teaching and learning of engineering physics. Taken as a whole, this study shows that students not only improved their final examination results but there was also an increase in the retention rate of first-year engineering students which has financial implications for the university. [ABSTRACT FROM AUTHOR]

The paper presents the approach to complex training of managers and faculty staff for system modernisation of Russian engineering education. As a methodological basis of design and implementation of the faculty development programme, the CDIO (Conceive-Design-Implement-Operate) Approach was chosen due to compliance of its concept to the purposes and tasks of engineering education development in Russia. The authors describe the structure, the content and implementation technology of the programme designed by Tomsk Polytechnic University and Skolkovo Institute of Science and Technology with the assistance of Chalmers University of Technology and KTH Royal Institute of Technology and other members of the CDIO Initiative. The programme evaluation based on the questionnaire results showed that the programme content is relevant, has high practical value and high level of novelty for all categories of participants. Therefore, the CDIO approach was recommended for implementation to improve various elements of the engineering programme such as learning outcomes, content and structure, teaching, learning and assessment methods. Besides, the feedback results obtained through programme participants' survey contribute to identification of problems preventing development of engineering education in Russia and thus serve as milestones for further development of the programme. [ABSTRACT FROM AUTHOR]

This paper presents results from a qualitative longitudinal study of students' transition into higher education engineering. The study aims at comparing upper-secondary school students' expectations of engineering with their actual experiences when encountering the engineering programme. It explores how this encounter provides a platform for students to become integrated during first year. We find that students' expectations are poorly met by their first-year study programme. In their attempt to bridge the gap between their expectations and their experiences, the students apply three strategies: some endure the gap, some constantly try out different study strategies and some compromised their expectations and identities to become more aligned with the study programme. The findings show that even when students successfully manage to bridge the gap, their strategy may turn out to be counterproductive from a learning point of view. The implications of the study are discussed. [ABSTRACT FROM PUBLISHER]

This study investigates the mismatch between the educational attainment of a graduate with a Master of Engineering (MEng) degree and the industry needs in China. A competency list for MEng graduates from the perspective of industry needs was constructed. And a survey was conducted among MEng graduate students, alumni, and employers to assess the listed items. The analysis of the survey data yielded five competencies. Mismatches were found for all five factors. Each discrepancy is discussed in detail in this paper. [ABSTRACT FROM PUBLISHER]

Thermodynamics is a fundamental foundation of all engineering disciplines. A vast majority of engineering undergraduate programmes contain one or more courses on thermodynamics, and many engineers use thermodynamics every day to analyse or design energy systems. However, there is extensive anecdotal evidence as well as a wide range of published literature indicating that students often struggle to understand thermodynamic principles. In an effort to understand students' attitudes and perception of thermodynamics, including their expectations, experience and frustrations, an investigation was conducted. Following a review of the literature on the teaching and learning of thermodynamics in engineering, a survey questionnaire was developed and administered to close to a 1000 students in 17 thermodynamics classes at 13 universities in 7 countries. Survey results were analysed using statistical methods. This paper presents the findings of this investigation. [ABSTRACT FROM AUTHOR]

The authors present insights on the challenges for innovation in engineering education. Topics discussed include the importance of engineering in the pursuit of a more sustainable and equitable world, a short history of the Portuguese Society for Engineering Education (SPEE), and the first international conference of SPEE.