15 results
Search Results
2. Briefing: Speeding up innovation by better 'first use' reporting.
- Author
-
Ainger, Charles
- Subjects
TECHNOLOGICAL innovations ,ENGINEERING ,CONSTRUCTION ,SUSTAINABLE engineering ,SUSTAINABLE development - Abstract
This briefing addresses an urgent issue for engineering innovators, institutions and journals: how can the spread of infrastructure innovation for sustainability be speeded up? It discusses the challenges and the reasons why innovation can be hard and slow, and focuses on a key innovation sequence: doing the 'first use' project, and early reporting of it, which 'enables' the first copying of the idea - the 'first follower project'. This starts to validate the new idea for the sector. The briefing finishes with some suggested questions to be answered by a good report paper on a 'first use' case study; and calls for more such papers to be submitted. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
3. The impact of Breeam on the design of buildings.
- Author
-
Haroglu, Hasan
- Subjects
CASE studies ,BUILDING Research Establishment Environmental Assessment Method ,CONSTRUCTION ,SUSTAINABLE engineering - Abstract
Over the past few years, the Building Research Establishment environmental assessment method (Breeam) has increasingly been used for building projects in the UK. This presents design teams with numerous challenges, not the least of which is the need to manage and accommodate the Breeam requirements in their design. This paper examines the impact of the Breeam assessment process on the design of building projects in the UK using eight case studies. The main effects were found to be in the areas of building features, materials and water services. This impact varied from project to project depending on the building type, location, targeted/required Breeam rating, date of assessment and the assessor's role, as well as the team's knowledge of the assessment process. There were significant design changes in the cases aiming to achieve the highest Breeam rating. The results suggest in some cases that Breeam may limit design teams in their design by drawing their attention to achieving Breeam credits rather than the building in its entirety. For instance, Breeam tends to dictate design solutions rather than focusing on the intention - as an example, a designer may focus more on major leak detection than saving water. The paper also discusses potential incorporation of Breeam requirements into building regulations. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
4. Construction waste in India: a structural equation model for identification of causes.
- Author
-
Kolaventi, Swarna Swetha, Momand, Hikmatullah, Tadepalli, Tezeswi, and Siva Kumar, M V N
- Subjects
MATERIALS handling ,PURCHASE orders ,BUILDING sites ,BUILDING performance ,EXPLORATORY factor analysis ,CONSTRUCTION ,STRUCTURAL equation modeling - Abstract
Construction industries are bulk generators of waste globally; improper management leads to environmental catastrophes. This paper identifies the significant factors through exploratory factor analysis and presents a novel approach to determining the causal relationships of various factors that lead to waste generation at construction sites by structural equation modelling. The analysis identifies maintaining and managing a site waste-management plan (SMP) as the top factor, with a path coefficient of 0·96. The impacts on waste generation of factors such as the operation stage (0·91), ordering and purchasing stage (0·84), hauling and handling stage (0·76), material handling stage (0·73), documentation (0·60) and culture (0·46) are quantified. Appropriate documentation provides the framework for SMP, on the basis of which other mitigation measures may be enforced, thus reinforcing the analysis results of SMP variables. Standardised documentation procedures for SMP need to be initiated and incentivised within existing green building performance rating frameworks, such as Green Rating for Integrated Habitat Assessment and Leadership in Energy and Environmental Design–India. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
5. Life-cycle assessment applied to construction of Thames Tideway east tunnel, London, UK.
- Author
-
Arena, Noemi
- Subjects
COMBINED sewer overflows ,TUNNEL design & construction ,TUNNELS ,CONSTRUCTION ,CARBON dioxide ,TIDAL power - Abstract
The Thames Tideway tunnel is a large sewer running up to 66 m below the tidal river Thames in London, UK. Its construction, started in 2016, was urgently needed to protect the tidal Thames from pollution due to the combined sewer overflows of untreated sewage that every year are spilled into the river. This paper reports on an exercise for evaluating the environmental impact associated with the construction process of the east section of the tunnel quantified by means of a life-cycle assessment, which not only primarily considered carbon dioxide emissions, but also took into account a wider series of impact categories. Operational and decommissioning impacts were not included. The results indicated the processes with the greatest effects on the environmental performance of the east sector construction and hence where alternatives on the design or materials used needed to be considered. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
6. Environmental management systems in the architecture, engineering and construction sectors.
- Author
-
Horry, Rosemary, Booth, Colin A, and Mahamadu, Abdul-Majeed
- Subjects
CONVERSATION analysis ,ENVIRONMENTAL management ,ORGANIZATIONAL performance ,SEMI-structured interviews ,INTERNATIONAL organization - Abstract
Implementing and using environmental management systems (EMSs) in the architecture, engineering and construction (AEC) sectors has received worldwide attention but never through a phenomenological lens. This study investigates the 'lived experiences' of experts who have implemented and used ISO 14001 in AEC organisations based in the UK. Using a qualitative research strategy of semi-structured interviews, extensive analysis of the conversations reveals several themes – namely, participants believe that ISO 14001 is not just an environmental business tool, ISO 14001 offers a means of delivering sustainability, ISO 14001 accreditation opens doors for business accruement and, moreover, ISO 14001 is more than a badge, rather it is a modern-day business necessity. The study also reveals that not all organisations asking for ISO 14001 have the accreditation themselves. Based on this evidence, and contrary to previous studies that have proposed that EMSs are chiefly implemented to save costs and comply with legislation, it seems that box ticking as part of the tendering process is now the major motivation for organisations to attain and maintain International Organization for Standardization accreditation. Further, concerns are expressed that some organisations are unwilling to state their sustainability objectives or embed their operations within an EMS that will be audited because it could emphasise their poor performance to stakeholders. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
7. Consulting stakeholders when selecting a structural form.
- Author
-
Rogers, Margaret and Rogers, Martin
- Subjects
STAKEHOLDERS ,STRUCTURAL steel ,CONSTRUCTION ,DECISION making ,STRUCTURAL engineering ,ARCHITECTS & engineers - Abstract
The authors have constructed a model for choosing between ten structural steel and concrete forms for an office block on the basis of a number of decision criteria, including cost, initial embodied energy, frame construction time and overall construction time. A multi-criteria decision model was utilised within this analysis, resulting in a ranking from 1 to 10 of the different structural options. A centrally important part of the modelling process was the assignment of importance weightings by different stakeholders to the four criteria, with these weightings then input directly into the multi-criteria decision model. Stakeholders were divided into different groupings with potentially significant inputs into the planning/design/construction process, including engineers, architects, planners, contractors and developers. The decision model was then run using each set of weightings derived from the weighting preferences of the different groupings. This paper outlines the method used to derive the weightings, analyses the effect the different weighting inputs have on the rankings of the ten structural options examined, and thus demonstrates how the views of the various stakeholders in this decision-making process regarding the choice of an optimal structural form can be accommodated using a weighted multi-criteria decision model. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
8. Building sustainability assessment methods.
- Author
-
AlWaer, Husam and Kirk, David
- Subjects
CONSTRUCTION ,BUILDING performance ,SUSTAINABLE development reporting ,INFRASTRUCTURE (Economics) ,SUSTAINABLE engineering - Abstract
Over last 15 years it has been increasingly important to understand the sustainability performance of buildings across a broad range of considerations. This has stimulated the development of a number of sustainability assessment tools intended to measure objectively a project's impact in sustainability terms and so encourage designers and planners to improve a building's performance. This paper examines the nature and contribution, as well as the limitations, of current sustainability rating assessment tools in evaluating building sustainability in different countries. Two yardsticks are used to review the current tools: first, how well they relate to the goal of sustainable development, and second, how adequately they adhere to the principles of objective assessment. Scope for further development of sustainability assessment tools is identified - in particular, the need for tools to assess more adequately how buildings provide well-being, and to expand how assessment systems capture qualitative information. The paper proposes that methodology and procedures of assessment methods should feature the broad participation of user groups drawn from the public. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
9. Stadthaus, London: raising the bar for timber buildings.
- Author
-
Wells, Matthew
- Subjects
DWELLINGS ,CONSTRUCTION industry ,TIMBER ,CONSTRUCTION ,BUILDINGS - Abstract
The nine-storey Stadthaus building in Murray Grove, London is the world's tallest timber residential building. It is also the first building of this height to have load-bearing walls and floor slabs as well as stair and lift cores constructed entirely from cross-laminated wooden panels. While cross-laminated timber construction has been around since the 1970s, several problems limited its use above six storeys. However, the advantage of low or negative embodied carbon dioxide, clean and safe processes and rapid assembly have prompted a range of solutions enabling taller structures. This paper describes the design and construction of the project, the practical and legislative concerns addressed and the lessons learned. [ABSTRACT FROM AUTHOR]
- Published
- 2011
- Full Text
- View/download PDF
10. Carbon dioxide reduction in the building life cycle: a critical review.
- Author
-
Ng, S. Thomas, Wong, James M. W., Skitmore, Steven, and Veronika, Alin
- Subjects
INDUSTRIAL applications of carbon dioxide ,CONSTRUCTION industry ,ENERGY consumption ,CARBON dioxide mitigation ,CONSTRUCTION ,CONSTRUCTION & the environment - Abstract
The construction industry is known to be a major contributor to environmental pressures due to its high energy consumption and carbon dioxide generation. The growing amount of carbon dioxide emissions over buildings' life cycles has prompted academics and professionals to initiate various studies relating to this problem. Researchers have been exploring carbon dioxide reduction methods for each phase of the building life cycle - from planning and design, materials production, materials distribution and construction process, maintenance and renovation, deconstruction and disposal, to the material reuse and recycle phase. This paper aims to present the state of the art in carbon dioxide reduction studies relating to the construction industry. Studies of carbon dioxide reduction throughout the building life cycle are reviewed and discussed, including those relating to green building design, innovative low carbon dioxide materials, green construction methods, energy efficiency schemes, life cycle energy analysis, construction waste management, reuse and recycling of materials and the cradle-to-cradle concept. The review provides building practitioners and researchers with a better understanding of carbon dioxide reduction potential and approaches worldwide. Opportunities for carbon dioxide reduction can thereby be maximised over the building life cycle by creating environmentally benign designs and using low carbon dioxide materials. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
11. Achieving sustainable resource networks.
- Author
-
Baker, Hannah, Clarke, Barry, Owen, Alice, and Unsworth, Rachael
- Subjects
INFRASTRUCTURE (Economics) ,SUSTAINABLE engineering ,CONSTRUCTION ,CONSTRUCTION & the environment ,TELECOMMUNICATION systems - Abstract
The aim of achieving a sustainable society is partly dependent on providing an infrastructure to minimise resource flows and associated environmental damage in ways that enhance a community's aspirations and needs. This implies that civil engineers need to understand the impact of population growth and its changing aspirations, developing technology and means to limit environmental impact in order to maintain, enhance or create interdependent infrastructure systems that are multifunctional and operate within complex qualitative and quantitative systems. Developing an understanding of existing resource networks and the interventions and initiatives needed to create a sustainable future leads to a framework that permits political and business decisions to be taken. Such an understanding is essential for appropriate civil engineering solutions for the underlying economic infrastructure - an infrastructure that is now developed through the UK's national infrastructure plan. This paper reviews the interventions, initiatives and barriers that affect the transformation of the food network, as a case study, to a sustainable network. This is to highlight the need for the resource flows to be factored into the national infrastructure plan. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
12. Briefing: Sustainable construction through improved information flows.
- Author
-
Taylor, Becci and Wilkie, Peter
- Subjects
SUSTAINABLE development ,CONSTRUCTION ,WORK environment ,QUALITY of work life ,OPERATING costs - Abstract
The article informs on a research paper that studies the scope of constructing sustainable building in Great Britain. The various advantages of sustainable development includes, utilization of fewer nonrenewable resources, improved living and work environment and the increased life of the buildings. It is informed that sustainable buildings amount to lesser operating and building costs. Also discussed is the involvement of the government and society in encouraging sustainable development.
- Published
- 2008
- Full Text
- View/download PDF
13. Gainsborough flood defence scheme: improving project delivery by reusing existing assets.
- Author
-
Ford, Ken, Dineley, Malcolm, and Zilles, Andreas
- Subjects
- *
FLOODS , *CARBON dioxide mitigation , *CONSTRUCTION , *NUMERICAL analysis - Abstract
This paper shows how an integrated team enabled the UK Environment Agency to deliver a more cost-effective and sustainable solution to improving protection for over 2600 properties in Gainsborough, Lincolnshire, from flooding by the tidal River Trent. The team identified several opportunities to cut costs, mitigate risks and reduce carbon dioxide emissions. At the outset, a detailed condition assessment and numerical analysis of existing flood defence structures enabled many of them to be reused, even though most were originally thought to be at the end of their design life. This and other initiatives resulted in cost savings £10 million, a shorter construction period and significantly lower environmental impact. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
14. 2000 W society: a sustainable energy vision for the future.
- Author
-
Fink, Andrin Mirco and Stulz, Roland J.
- Subjects
RENEWABLE energy sources ,CARBON dioxide mitigation ,ENERGY consumption ,CONSTRUCTION ,POWER resources - Abstract
A group of Swiss researchers has developed a vision of a sustainable future where both energy demand and carbon dioxide emissions are substantially reduced without compromising standards of living. The upcoming challenges of climate change, scarcity of resources and growing disparities between industrialised countries and developing countries in energy need and carbon dioxide emissions require changes from the building and engineering sector. 2000W compatible construction is planned in Switzerland based on the Swiss Society of Engineers and Architects' (SIA) efficiency path for energy. Apart from the operations energy, this standard also includes both the embodied energy accounting with the construction materials and mobility related to the use of the building to calculate a building's energy footprint. To implement the 2000W vision in the design and construction of new buildings, a holistic approach to lower energy consumption is essential. Such an holistic approach includes both the appliance of the best available technologies and the substitution of the current carbon dioxide-intensive energy supply by a considerable proportion of renewable power. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
15. Briefing: Dry bottom-feed stone column construction in soft fine-grained soils.
- Author
-
Serridge, Colin J.
- Subjects
COLUMNS ,CONSTRUCTION ,SOILS ,CARYATIDS ,CONSTRUCTION materials ,STRUCTURAL clay products - Abstract
Increasing pressure to develop marginal soft clay sites, combined with increasing emphasis on environmentally sensitive and sustainable vibro ground improvement solutions, has seen significant advances in the use and application of the dry bottom-feed vibro stone column technique. It is clear, however, from the observations made during field trials of partial-depth vibro stone columns at the (former) Bothkennar soft clay research site in Scotland, that appropriate consideration needs to be given to stone column construction using the dry bottom-feed method in soft, sensitive, fine-grained soils, in order to minimise disturbance effects and optimise performance. Some of the more significant observations made, together with some suggested best practice guidance on stone column construction using the dry bottom-feed method, are outlined; some potential further research opportunities are also suggested. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.