Search

High-resolution reflection interference contrast microscopy (HR-RICM) was developed for probing the deformation and adhesion of phospholipid vesicles induced by colloidal forces on solid surfaces. The new technique raised the upper limit of the measured membrane–substrate separation from 1 to 4.5 μm and improved the spatial resolution of the heterogeneous contact zones. It was applied to elucidate the effects of wall thickness, pH and osmotic stress on the non-specific adhesion of giant unilamellar vesicles (ULV) and multilamellar vesicles (MLV) on fused silica substrates. By simultaneous cross-polarization light microscopy and HR-RICM measurements, it was observed that ULV with the wall thickness of a single bilayer would be significantly deformed in its equilibrium state on the substrate as the dimension of its adhesive–cohesive zone was 29% higher than the theoretical value of a rigid sphere with the same diameter. Besides, electrostatic interaction was shown as a significant driving force for vesicle adhesions since the reduction in pH significantly increased the degree of deformation of adhering ULV and heterogeneity of the adhesion discs. The degree of MLV deformation on the solid surfaces was significantly less than that of ULV. When the wall thickness of vesicle increased, the dimension of contact zone was reduced dramatically due to the increase of membrane bending modulus. Most important, the adhesion strength of colloidal adhesion approached that of specific adhesion. Finally, the increase of osmotic stress led to the collapse of adhering vesicles on the non-deformable substrate and raised the area of adhesive contact zone. To interpret these results better, the equilibrium deformation of adhering vesicle was modeled as a truncated sphere and the adhesion energy was calculated with a new theory. [Copyright &y& Elsevier]

A hyperelastic shell with spherical cap geometry is compressed to a rigid planar substrate. Using Maugis' graphical method and a numerical approach, the quasi-static adhesion-detachment trajectory, the interrelation between applied load, approach distance and contact radius, and the critical pull-off parameters are determined for ranges of materials stiffness, shell thickness, shell depth and interfacial adhesion energy. [ABSTRACT FROM AUTHOR]

Abstract: Macroscopic adhesion–aggregation, floc formation, and subsequent transportation of microorganisms in porous media are closely related to the microscopic behavior and properties of individual cells. The classical Tabor’s parameter in colloidal science is modified to correlate the macroscopic aggregation and microscopic adhesion properties of microorganisms. Seven bacterial strains relevant to wastewater treatment and bioremediation were characterized in terms of their macroscopic aggregation index (AI) using an optical method, and their microscopic coupled adhesion and deformation properties using atomic force microscopy (AFM). Single cells were indented to measure the range and magnitude of the repulsive–attractive intersurface forces, elastic modulus, thickness and density of the cellular surface substances (CSS). The strong correlation suggests that cost and time effective microscopic AFM characterization is capable of making reliable prediction of macroscopic behavior. [Copyright &y& Elsevier]

Abstract: Adhesion of a pre-stressed silicone rubber film to a planar graphite surface was investigated by a new cylindrical punch method. A homemade apparatus was constructed to meet force and displacement resolutions of 0.1μN and 10nm. When the punch approached the intersurface force range across the punch-film gap, the film jumped into contact at “pull-in”. Upon unloading, once the tensile load reached a threshold, a spontaneous delamination occurred at “pull-off” with a non-zero contact circle. A theoretical model was constructed based a simple energy balance. The new method can be used to characterize an adhesion interface between a pre-stressed free-hanging film and a rigid substrate. [Copyright &y& Elsevier]

Abstract: The elastic properties and adhesion of a thin silicone rubber membrane have been characterized. An effective instrumentation embodying a video-enhanced microscope, which meets force and displacement resolution of and 10nm, was developed. It provides the capability of simultaneously measuring both the applied force and the resultant displacement of the thin polymer membrane. A linear theoretical elastic solution was applied to quantitatively interpret the measured central deflection of the membrane under a circular concentrical load. Young''s modulus of the membrane can be easily determined once the applied force and the central deflection, together with the essential dimensions, are known. The membrane jumped into an adhesion contact when the punch approached the range of the inter-surface force across the punch-membrane gap. A pull-off event was observed at a nonzero contact circle when the tensile load reached a critical threshold. The experiment is basically consistent with a theoretical model based on linear elasticity and an energy balance. The new method can be used to measure mechanical behavior of prestressed ultra-thin biomembranes and thin walled biocapsules with a residual stress. [Copyright &y& Elsevier]