Search

Nowadays high porosity aerogels are widely applied in wastewater purification, while the fragility and unversatility of nascent cellulose aerogels limited the application in oil/water filtering separation. Here, highly compressible, elastic, superhydrophobic cellulose/poly(vinyl alcohol) (PVA) composite aerogels were fabricated via combination of chemical cross-linking, freeze drying and silanization. The obtained cellulose/PVA aerogels exhibited durable superhydrophobicity with WCA of 156.6 °, even maintaining 155.0 ° after 30 days. Synergistic effects of physical entanglement, chemical cross-linking and H-bond network between cellulose and PVA molecular chains endowed the aerogels with excellent compressibility and recoverability. The aerogels exhibited maximum compressive stress of 490.7 kPa at 90% strain, even without reduction in mechanical strength under 70% compressive strain for 10 cycles. More importantly, the strengthened aerogels exhibited remarkable separation performances for both immiscible oil/water mixtures and surfactant-stabilized water-in-oil emulsions. Fascinating permeation flux of up to 7176.3 L m−2 h−1 and total separation amount as high as 4550.6 L m−2 with separation efficiency of 98.5% for water-in-cyclohexane emulsion were harvested. Thus, this work provides a green, sustainable and mass-producible cellulose-based aerogel for high-efficiency oily wastewater remediation. [ABSTRACT FROM AUTHOR]

This work is the first attempt to prepare microporous polytetrafluoroethylene (PTFE) fibrous layers embedded with aerogels/phase change materials. For preparation of this layer, the needle-less electrospray technology of water dispersion of individual components is used. Microstructure characteristics, including surface morphology and particle size distribution, and various properties of the prepared materials were investigated and explained. Transport performance of the fibrous layers embedded with aerogels/phase change materials, such as the transmission of heat, air, and water vapor was evaluated and discussed in details. It was found that the electro-sprayed materials composed by spherical particles with rough surface had compact disordered stacking structure. Aerogels and phase change materials (PCMs) play different roles in determining structural parameters and transport properties of the materials. Those parameters and properties could be flexibly adjusted by optimizing the spinning parameters, changing the content or proportion of the fillers to meet specific requirements. [ABSTRACT FROM AUTHOR]

Metal-organic frameworks (MOFs) as catalysts for the activation of peroxymonosulfate (PMS) to remove recalcitrant organic contaminants has been well reported, however, the separation of MOFs from the solution is difficult because of their powder state, which limits their applications. In the present study, zeolitic imidazole framework (ZIF) materials, ZIF-9 and ZIF-12 were pioneered to load on cellulose aerogels, and the hybrid aerogels as metal catalysts to effectively activate PMS for Rhodamine B (RB), tetracycline hydrochloride (TC) and p-nitrophenol (PNP) degradation. The hybrid aerogels/PMS system could remove PNP about 90% in 1 h, which hard to remove from water. The pH value of the solution had no effect on the degradation process, which demonstrated that the hybrid aerogels had excellent pH tolerance. In addition, the mechanism of PNP degradation was investigated by electron paramagnetic resonance (EPR) and free radical trapping methods. The results showed that PMS could effectively activate by hybrid aerogels to produce sulfate radicals (SO 4 −), hydroxyl radicals ( OH), and revealed that SO 4 − play a key role in degradation. The most important feature of hybrid aerogels is can be easily separated from the solution. The obtained results showed that the hybrid aerogels exhibit excellent recyclability, with no significant effect on degradation. The prepared hybrid aerogels are green, environmentally friendly with high catalytic efficiency. Further, the outstanding degradation of PNP demonstrates the promising prospects of hybrid aerogels as advanced oxidation process (AOP) catalysts. [ABSTRACT FROM AUTHOR]

Nanostructured materials with designable microstructure fabricated through a facile and green method are highly desired for practical applications in nanotechnology. Herein, without using any toxic reagents, flexible cellulose aerogel nanocomposites embedded with ZnO@noble metal nanoparticles (NPs) were successfully prepared from a cellulose dope. Morphology, structure, and mechanical properties of the nanocomposite were characterized. Flower-liker ZnO particles were synthesized through cellulose mineralization and it acted as a platform for efficient photocatalytic synthesis of noble metal (Ag, Au, Ag-Au) NPs. The noble metal NPs were well dispersed in the three-dimensional (3D) cellulose skeleton, resulting in abundant "hot spots" for high Surface Enhanced Raman Scattering (SERS) signal enhancement. Using rhodamine 6 G (R6G) molecules as probe molecules, the detection limits and calculated enhancement factors approached to 10−10 M and 4.8 × 107, respectively. Particularly, the photocatalytic capabilities of noble metal-semiconductor heterostructure embedded in porous aerogel made it a self-cleaned SERS substrate. There was little sensitivity loss after recycling use for 3 times. This work presented a sustainable and cost-reduction strategy to construct sensitive SERS substrate. [Display omitted] • Cellulose aerogel embedded with ZnO@Ag/Au is facilely fabricated from a dope. • The actived celluloe chains act as mineralization template for flower-like ZnO. • Ag/Au NPs are plated to ZnO surface through a controllable photoreduction method. • 3D porous aerogel gives anchoring effect for particles and bring abundant "hot spots". • Hierarchical nanostructures achieves a flexible, sensitive and reusable SERS strips. [ABSTRACT FROM AUTHOR]

The low cost of adsorption treatment of heavy metal ions in water has been extensively studied. In this paper, we have demonstrated a facile method of combining two emerging materials cellulose aerogels (CA) and metal–organic frameworks (MOFs) into one highly functional aerogel to adsorption removal of heavy metal ions from water, by entrapping MOF particles into a flexible and porous CA. The resultant hybrid cellulose aerogels had a highly porous structure with zeolitic imidazolate framework-8 (ZIF-8) loadings can reach 30 wt%. The hybrid cellulose aerogels (named as ZIF-8@CA ) show good adsorption capacity for Cr(Ⅵ). The adsorption process of ZIF-8@CA is better described by pseudo-second-order kinetic model and Langmuir isotherm, with maximum monolayer adsorption capacity of 41.8 mg g −1 for Cr(Ⅵ), whose adsorption capacity has greatly improved when compared with a single CA or ZIF-8. Thus, such a flexible and durable hybrid cellulose aerogel is a very prospective material for metal ions cleanup and industrial wastewater purification. [ABSTRACT FROM AUTHOR]