Search

This study examines the potential of four invasive plant species, both arboreal and herbaceous, within the riparian forest of the Umia River in Galicia, a common ecosystem in northern Spain. These invasive species (Arundo donax, Phytolacca americana, Eucalyptus globulus, and Tradescantia fluminensis) were collected and assessed for their suitability as an alternative source of pulp and paper materials for the paper industry to mitigate the environmental impacts associated with conventional cellulose fiber production from harmful monocultures. Cellulosic material from leaves, bark, and/or stems of each of the selected species was isolated from lignin and hemicelluloses through kraft pulping processes. Resulted fibers and pulps were analyzed visually, morphologically, chemically, and mechanically to evaluate their papermaking properties. To compare these properties with those of commercially available pulp, test sheets were concurrently produced using commercial bleached Eucalyptus cellulose. The findings reveal that the employed fibers exhibit promising characteristics for artistic paper production. Regarding the pulp, two refining times were tested in a PFI machine, and the Schopper–Riegler degree was measured. Paper sheets underwent various tests to determine thickness, basis weight, apparent volume, apparent density, permeability, and chemical composition, as well as microscopic optical and morphological properties. The fibers obtained from the waste derived from the removal of invasive exotic species and biodiversity control present a viable and intriguing alternative for decentralized paper production, yielding noteworthy results for the creative sector. This research highlights the potential of harnessing invasive species for sustainable and innovative paper manufacturing practices.

This article is based on a systematic research of the literature related to influence of Industry 4.0 and its technologies on achieving sustainability in supply chain, which is becoming increasingly significant topic as demand for supply chain sustainability increases. Based on the research findings, this article highlights scholars that mainly discuss the influence of Industry 4.0 on supply chain sustainability, as well as the most relevant articles that might form a basis for other scholars when conducting research. The findings reveal a trend toward studying the supply chain from the perspective of the circular economy, i.e. the importance of building the supply chain using circular economy concepts. The study has limitations due to the analysis of only Englishlanguage articles without including books, as well as a concentration on the Scopus database only. [ABSTRACT FROM AUTHOR]

Circular-economy-based sustainability approaches in construction are gaining wide acceptance due to the volume of waste generation and increasing demand for natural materials. Propelled by the recent timber shortage in Australia and the issues of waste management of cardboard, this study aims to analyse the possibilities of using cardboard as a construction material, based on its initial strength and multiple recycling options. A systematic review of research papers published in the last 40 years has been undertaken using a single keyword search to select the database. The review is presented in terms of the characteristics of the cardboard, dimensional stability, durability, structural strength, design, and analysis of cardboard. Recurring themes are evaluated using a latent Dirichlet allocation approach to identify the factors that ascertain the suitability of cardboard. Analysis reveals that despite certain constraints, such as water absorption and fire resistance, cardboard can be used as a replacement for timber by overcoming such limitations. This observation has benefits for the construction industry and the recycling industry. This study found that cardboard adheres to the circular economy principles, which should inspire policymakers. The paper concludes by highlighting the current circumstances and scientific challenges that impede the usage of cardboard in construction and recommends potential works needed to address these challenges for the benefit of practitioners and researchers. [ABSTRACT FROM AUTHOR]

The application of Life Cycle Assessment in the construction sector can be a very useful tool to reduce the environmental impact generated by the sector. In order to quantify the improvement in environmental terms with the use of artificial lightweight aggregates (LWA) manufactured with waste, in this work, we conducted a comparative evaluation of the life cycle of LWAs for a total of five different scenarios: LWAs obtained in a traditional way, i.e., using exclusively clay in their manufacture (Spanish blond clay, Portuguese red clay and Portuguese blond clay), and LWAs manufactured with four different wastes, with a partial substitution of 2.5% for each of the clays per waste (almond and hazelnut shells, sludge from the purification of paper money, cork dust and coffee grounds). The functional unit was set as the production of 1 kilo of lightweight aggregates and the CML 2000 methodology and the SimaPro software were used. The results obtained in this research allow us to conclude that the addition of organic wastes showed a slightly higher environmental performance than the conventional system, the ALAs manufactured with almond and hazelnut shells being the most environmentally friendly option, with reductions of more than 30% in some cases, followed by the LWAs manufactured with coffee grounds. On the other hand, the addition of paper sewage sludge and cork dust represents minimal environmental optimization. [ABSTRACT FROM AUTHOR]

This position paper critically analyses the process to implement the UNESCO Recommendation on the Historic Urban Landscape (2011), exploring evaluation tools, innovative business / management models and financing tools for the conservation and regeneration of Historic Urban Landscape (HUL), to make it operational in the perspective of a circular economy model of sustainable development for city / territory system regeneration. Through evaluation tools, it is possible to pass from general principles to operational practices; to produce empirical evidence of the economic, social and environmental benefits of HUL integrated conservation and regeneration. The challenge of generating a symbiosis between conservation and transformation issues requires adequate evaluation methods, business, management and financing tools, engaging civil society and local stakeholders, capturing both HUL tangible and intangible values to turn the historic urban landscape into a driver of sustainable growth. The analysis carried out in this paper shows that through the suggested tools it is possible to make operational the UNESCO Recommendations, transforming conflicts into opportunities, producing economic attractiveness and strengthen social awareness and cohesion. [ABSTRACT FROM AUTHOR]

The optimization of water management in industrial processes is paramount in diminishing or mitigating, as far as possible, the negative externalities generated by its current use within the linear economy model. This research presents methods for the optimization of wastewater from paper mills which are associated with the new sustainability and circular economy model. In this way, the concept of circular economy was applied to the wastewater treatment from a paper mill, with the objective of recovering the resources contained in this type of effluent. The wastewater treatment plant is based on a biological reactor of activated sludge, and treats a flow of 4868 m3·day−1. This study proposes the development and evaluation of indicators of circular economy applied to wastewater from a paper mill, as well as the assessment of the removal performance of color, total suspended solids (TSS), biochemical oxygen demand on the fifth day (BOD5), and chemical oxygen demand (COD), which are higher than 96% in all cases. Per 1 m3 of wastewater from a paper mill, a volume of 0.9 m3 of potentially reusable water and a recovered sludge mass of 0.7 kg are generated; the latter is reused as a mineral filler during the process itself. In light of this, a multivariable statistical analysis was applied to determine the relationship of the operation variables and indicators of circular economy. In this way, wastewater from the paper mill can be regarded as a technological nutrient, which is partially reintroduced into the production process, enabling the recovery of the water and mineral fillers that it contains. [ABSTRACT FROM AUTHOR]

Sustainability in power electronics is a recent research topic. It takes place among current actions to grasp design choices that enable eco-design and circular economy in the domain. This paper shows the results and analysis of a literature review at the intersection of power electronics and sustainability without considering the reliability study of the power electronics systems. The first part explains the scope of the study. The second part shows a bibliometric analysis of the collected publications that underlines a pioneering position at the European level. The third part details the state-of-the-art and its analysis over four investigation topics which are: tools and methods, indicators, circularity and materials. This paper and the work behind are the results of collaboration at the French national level, as part of the workgroup CEPPS (Convertisseurs Electronique de Puissance Plus Soutenables—More Sustainable Power Electronics Converters) supported by the CNRS (Centre National de la Recherche Scientifique—French National Centre for Scientific Research) research group SEEDS (Systèmes d'énergie électrique dans leurs dimensions sociétales—Societal dimensions of electrical energy systems). [ABSTRACT FROM AUTHOR]

Manganese (Mn) contained in cellulose is partially responsible for an increased consumption of paper bleaching chemicals (like O2, H2O2), consequently diminishing the efficiency in pulp processing, darkening the pulp and deteriorating pulp quality. Usually, Mn in the paper industry is removed employing the environmentally critical EDTA. A greener alternative constitutes, however, the use of siderophores, high-affinity metal-chelating organic compounds that are produced by microorganisms to acquire metals (Fe and Mn among others), like desferrioxamine B (DFOB) or desferrioxamine E (DFOE). The use of native Mn-transporter proteins, like PratA, constitutes another possibility for Mn removal. The evaluation of utilizing siderophores or PratA for Mn removal from cellulose in a circular economy scheme is therefore essential. Firstly, Mn removal from cellulose was performed by immobilizing siderophores or PratA on magnetic beads (M-PVA C22). Secondly, the beads were incubated overnight with a 2% cellulose suspension, allowing Mn-ligand complex formation. Finally, cellulose suspensions were submitted for Mn quantification, employing either the TCPP [Tetrakis(4-carboxyphenyl)porphyrin] method, the PAN [1-(2-pyridylazo)-2-naphthol] method or the Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). When non-immobilized ligands were employed, a 31% Mn removal was achieved; when using immobilized ligands, around 10% Mn removal was obtained. Treated and untreated cellulose was analyzed by SEM and the Mn distribution between the solid and liquid phase was parameterized using adsorption isotherm models. This novel greener method proved to be feasible and easy, leading to potential improvements in the paper industry. Next research steps are to optimize Mn removal and quantify Mn recovery after ligand decoupling before scaling-up. [ABSTRACT FROM AUTHOR]

In recent years, climate change has begun to put pressure on humanity and affect natural and human systems. The aim of this paper is to provide an improved understanding of the state of the literature on the impacts of climate change that can be addressed through measures related to disaster risk reduction, sustainable agricultural practices, and the circular economy. This review also represents a valuable and fundamental reference for both researchers and practitioners in these fields. A total of 74,703 articles (climate change adaptation, 45,030; disaster risk reduction, 5920; sustainable agricultural practices, 7940; circular economy, 15,813) published between 1990 and 2022 were extracted from the Web of Science Core Collection, and the links between these areas were mapped using VOSviewer. There has been an increase in the amount of published research on these four topics since 2007, indicating the increasing involvement of researchers to address these topics, influenced by the concerns of national and international bodies to address these changes. [ABSTRACT FROM AUTHOR]

Although recycling is considered the core of a circular economy for returning materials to the supply chain, its procedures are poorly understood. Waste recycling is considered a big source of energy saving and a promoter of CO2 recovery. Besides that, it generates jobs and changes markets worldwide. The Brasilian National Policy on SolidWaste (PNRS) recognizesWaste Pickers as the major social agent in the recycling process responsible for putting Brasil among the ten largest paper-recycling countries in the world. This paper presents an analysis of Brasilian recycling chains of paper and plastics and the main challenges for expanding recycling from Municipal solid waste. The research data were obtained from primary and secondary source related to the recycling supply chain of paper and of the following plastics--High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Polypropylene(PP), Polyethylene Terephthalate(PET) and Polystyrene(PS). Enterprises of various sizes, including informal ones and WPs associations/cooperatives, were visited, in the five Brasilian geographic regions, during the years of 2013 and 2014. A nomenclature was defined for the various enterprises that operate in the Brasilian recycling chain. Each node of the plastic and paper recycling chain was described. The main bottleneck observed in these chains is the lack of continuous programs of selective collection with an emphasis on environmental education processes in the 5570 Brasilian municipalities. Several possibilities not only to promote waste recycling but also to increase the productivity of the sorting process are discussed. [ABSTRACT FROM AUTHOR]

The sugarcane industry has assumed an increasingly important role at a global level, with countries such as Brazil and India dominating the field. However, this causes environmental problems, since the industry produces large amounts of waste, such as sugarcane bagasse. This by-product, which is energetically partially recovered in sugar mills and in the pulp and paper industry, can make a significant contribution to the general use of biomass energy, if the usual disadvantages associated with products with low density and a high moisture content are overcome. From this perspective, thermochemical conversion technologies, especially torrefaction, are assumed to be capable of improving the fuel properties of this material, making it more appealing for potential export and use in far-off destinations. In this work, sugarcane samples were acquired, and the process of obtaining bagasse was simulated. Subsequently, the bagasse was dried and heat-treated at 200 and 300 °C to simulate the over-drying and torrefaction process. Afterward, product characterization was performed, including thermogravimetric analysis, elemental analysis, calorimetry, and energy densification. The results showed significant improvements in the energy content, from 18.17 to 33.36 MJ·kg−1 from dried bagasse to torrefied bagasse at 300 °C, showing that despite high mass loss, there is potential for a future value added chain for this waste form, since the increment in energy density could enhance its transportation and use in locations far off the production site. [ABSTRACT FROM AUTHOR]

Copyright of Avances en Ciencias e Ingenierías (ACI) is the property of USFQ Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Circular economy (CE) has garnered increasing attention in political circles and practitioner literature thanks to its potential to overcome the harmful consequences of linear patterns of growth. Nonetheless, the adoption of sustainable practices entails a holistic approach requiring businesses to make significant changes to their production, technologies and stakeholder management. These challenges resulted in limited progress in terms of the practical implementation of CE. This paper addresses the need for more literature focused on the pragmatic aspects of applying this paradigm to incumbent firms. The author presents the journey that Lucart S.p.A., a major European tissue paper manufacturer, has undertaken between 2014 and 2020 to apply CE principles to its practices. Insights from the transformation process, reconstructed through interviews with the firm's management and environmental impact data, suggest that to succeed it takes innovating (plants, products and marketing strategies) and setting up supply chains that reconcile environmental and economic sustainability. [ABSTRACT FROM AUTHOR]

In this paper we investigate the market size of all materials and products presently produced from (organic) carbon and we present a method to estimate the intrinsic recycling potential of these materials/chemicals as a function of their respective applications. The method is based on the expert assessment of a number of variables that are important within the different application categories and markets of the carbon-based materials/chemicals. Applying the method, the paper presents the recycling potential of all carbon-based products. Following, an estimation of the amount of new products that can be produced each year through recycling of discarded products is presented and the amount of carbon that needs to come from other sustainable sources to fulfil our demand for new products is calculated. We distinguish nine different categories of (organic) carbon-based materials/chemicals: plastics, textile fibres, thermoset resins, rubbers, surfactants, solvents, fine chemicals, paper/board and wood products. Within these nine categories the most important materials/chemicals types were taken into account. Fossil-based and bio-based materials/chemicals were assessed separately. For each of the materials/chemicals types, the market size in terms of mass (Mt) was calculated for the main applications in which they are applied. Next, for all materials/chemicals types in these applications, the maximum recycling potential, in case mechanical or physical recycling methods are applied, was assessed, using an expert panel. Also, inevitable leakage of materials/chemicals in the different applications was assessed. Finally, the amount of feedstock coming from recycling streams that may be made available for chemical recycling or carbon capture and utilisation technologies was derived. From this, the magnitude of carbon-based materials/chemicals that need to be replaced each year by other renewable feedstock than recycled content in terms of Mton carbon was calculated. The analysis is relevant in view of implementation of a circular economy and reuse and recycling of materials, to combat depletion of raw materials. Next, it is relevant in view of phasing out fossil-feedstock to combat climate change. Our analysis indicates that the recycling potential of carbon-based materials and products through mechanical or physical methods lies around 50%, even in a system that is fully optimised for recycling. Chemical recycling and carbon capture and utilisation may provide another 25% of the renewable-carbon feedstock needed, but they generally require far more energy and other inputs to produce new materials and chemicals than the mechanical and physical recycling methods. The remaining demand for renewable-carbon feedstock thus needs to come from either biomass or CO 2 through carbon capture and utilisation technologies. Based on our findings, we argue that the composition of our present carbon-based products pool needs to be redesigned on a fundamental molecular level, towards material types that contain more oxygen. Carbon-based materials that contain more oxygen generally can be recycled more efficiently, and are also easier to produce from the alternative feedstocks biomass and CO 2 through CCU. [ABSTRACT FROM AUTHOR]

Food waste is a global challenge, with profound implications for food security, resource utilization, and sustainability. A circular economy represents a promising solution in addressing food waste effectively by keeping food materials and products in use and circulating them within the economy. To provide an overview of the research on food waste and the circular economy model in the past decade, this study examines 1022 documents on food waste and circular the economy to ascertain the state, themes, and knowledge structure of the field. The results showed that the number of publications has increased greatly in the past decade. "Circular economy of food", "bioenergy", "waste valorization", "waste management", "resource recovery", and "environmental assessment" were the major research themes. Earlier studies focused on resource recovery from organic waste and the bioeconomy of bio-products; recent research interests shifted to sustainability and the valorization of agri-food waste. On the other hand, some highly cited documents and productive authors were important in the development of research on food waste and the circular economy. Furthermore, three groups of journals—"food and environmental sciences", "open access", and "environmental sustainability and resource management"—and five clusters of international collaboration—"European Union Group", "advanced economy group", "agricultural economies", "global influencers", and "isolated countries"—were identified. This study provides readers with an overview of the research field of food waste and the circular economy. [ABSTRACT FROM AUTHOR]

This paper examines the implementation of a digital product passport (DPP) using Hyperledger Fabric technology to enhance product lifecycle management within the European Union's circular economy action plan. This study addresses the need for detailed product information on materials, origin, usage, and end-of-life instructions to improve recycling practices and promote sustainable consumption. The approach integrates decentralized identifier (DID) technology for unique product identification using the cheqd.io platform with an enterprise tailored Hyperledger Fabric blockchain network for DPP data management, leveraging their strengths to enhance security and efficiency. This paper details the data model for the DPP, including entities like Product, Manufacturer, Supplier, and Material. Performance tests on the Hyperledger Fabric network demonstrate the system's efficacy, focusing on CRUD operations and scalability. Future work will extend to the development of client applications and more comprehensive performance evaluations considering scalability and network expansion. [ABSTRACT FROM AUTHOR]

In recent decades, there has been growing interest in the thermal conversion of various alternative fuels, such as biomass and waste-derived fuels. One of the technological solutions for the so-called direct co-combustion of fuels is to create mixtures of various fuels, called mixed secondary fuel. However, mixed secondary fuel has different properties compared to primary fuels. Due to this, by properly selecting the types and proportions of mixtures, it is possible to eliminate their potentially negative impact on both combustion technology and the natural environment. In this paper, we decided to prepare mixed secondary fuel by mixing sunflower husk pellets with RDF (refuse-derived fuel) in a ratio of 1:1 and then analyze the combustion process of the produced fuel in fluidized bed conditions. The results obtained on the basis of the presented research indicate that the mixed secondary fuel eliminated the impact of alkali metal compounds on reducing the melting point of ash and, consequently, on the combustion process of the mixed secondary fuel. An additional benefit is the reduction of emissions of harmful compounds into the atmosphere occurring during the combustion of municipal waste and compliance with the concept of the circular economy. [ABSTRACT FROM AUTHOR]