Search

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented. [ABSTRACT FROM AUTHOR]

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

Early industrialization and the development of cheap production processes for paper have led to an exponential accumulation of paper-based documents during the last two centuries. Archives and libraries harbor vast amounts of ancient and modern documents and have to undertake extensive endeavors to protect them from abiotic and biotic deterioration. While services for mechanical preservation such as ex post de-acidification of historic documents are already commercially available, the possibilities for long-term protection of paper-based documents against fungal attack (apart from temperature and humidity control) are very limited. Novel processes for mechanical enhancement of damaged cellulosic documents use Ionic Liquids (IL) as essential process components. With some of these ILs having azole-functionalities similar to well-known fungicides such as Clotrimazole, the possibility of antifungal activities of these ILs was proposed but has not yet been experimentally confirmed. We evaluated the potency of four ILs with potential application in paper restoration for suppression of fungal growth on five relevant paper-infesting molds. The results revealed a general antifungal activity of all ILs, which increased with the size of the non-polar group. Physiological experiments and ultimate elemental analysis allowed to determine the minimal inhibitory concentration of each IL as well as the residual IL concentration in process-treated paper. These results provide valuable guidelines for IL-applications in paper restoration processes with antifungal activity as an added benefit. With azoles remaining in the paper after the process, simultaneous repair and biotic protection in treated documents could be facilitated. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) can evolve in a viable technology if environmentally sound materials are developed and became available at low cost for these devices. This is especially important not only for the designing of large wastewater treatment systems, but also for the fabrication of low-cost, single-use devices. In this work we synthesized membranes by a simple procedure involving easily-biodegradable and economic materials such as poly (vinyl alcohol) (PVA), chitosan (CS) and the composite PVA:CS. Membranes were chemical and physically characterized and compared to Nafion®. Performance was studied using the membrane as separator in a typical H-Type MFCs showing that PVA:CS membrane outperform Nafion® 4 times (power production) while being 75 times more economic. We found that performance in MFC depends over interactions among several membrane characteristics such as oxygen permeability and ion conductivity. Moreover, we design a paper-based micro-scale MFC, which was used as a toxicity assay using 16 μL samples containing formaldehyde as a model toxicant. The PVA:CS membrane presented here can offer low environmental impact and become a very interesting option for point of need single-use analytical devices, especially in low-income countries where burning is used as disposal method, and toxic fluoride fumes (from Nafion®) can be released to the environment. [ABSTRACT FROM AUTHOR]

The objective of this work was to investigate the influence of hydrogen bonds between fibres on static and dynamic strength properties of paper. A commercial bleached pinewood kraft pulp was soaked in water, refined in a PFI, and used to form paper webs in different solvents, such as water, methanol, ethanol, n-propanol and n-butanol, to determine the effect of their dipole moment on static and dynamic strength properties of resulting paper sheets. Paper which was formed in water, being the solvent of the highest dipole moment among the tested ones, showed the highest breaking length and tear resistance. When paper webs were formed in n-butanol, which was the least polar among the solvents, these parameters were reduced by around 75%. These results provide evidence of the importance of water in paper web formation and strong impact of hydrogen bonds between fibres on strength properties of paper. [ABSTRACT FROM AUTHOR]

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone. [ABSTRACT FROM AUTHOR]

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of ‘superfolder’ green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 μg/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens. [ABSTRACT FROM AUTHOR]

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested. Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools. Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

In this study, we address the question whether (and to what extent, respectively) altmetrics are related to the scientific quality of papers (as measured by peer assessments). Only a few studies have previously investigated the relationship between altmetrics and assessments by peers. In the first step, we analyse the underlying dimensions of measurement for traditional metrics (citation counts) and altmetrics–by using principal component analysis (PCA) and factor analysis (FA). In the second step, we test the relationship between the dimensions and quality of papers (as measured by the post-publication peer-review system of F1000Prime assessments)–using regression analysis. The results of the PCA and FA show that altmetrics operate along different dimensions, whereas Mendeley counts are related to citation counts, and tweets form a separate dimension. The results of the regression analysis indicate that citation-based metrics and readership counts are significantly more related to quality, than tweets. This result on the one hand questions the use of Twitter counts for research evaluation purposes and on the other hand indicates potential use of Mendeley reader counts. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

Background: There is widespread evidence that statistical methods play an important role in original research articles, especially in medical research. The evaluation of statistical methods and reporting in journals suffers from a lack of standardized methods for assessing the use of statistics. The objective of this study was to develop and evaluate an instrument to assess the statistical intensity in research articles in a standardized way. Methods: A checklist-type measure scale was developed by selecting and refining items from previous reports about the statistical contents of medical journal articles and from published guidelines for statistical reporting. A total of 840 original medical research articles that were published between 2007–2015 in 16 journals were evaluated to test the scoring instrument. The total sum of all items was used to assess the intensity between sub-fields and journals. Inter-rater agreement was examined using a random sample of 40 articles. Four raters read and evaluated the selected articles using the developed instrument. Results: The scale consisted of 66 items. The total summary score adequately discriminated between research articles according to their study design characteristics. The new instrument could also discriminate between journals according to their statistical intensity. The inter-observer agreement measured by the ICC was 0.88 between all four raters. Individual item analysis showed very high agreement between the rater pairs, the percentage agreement ranged from 91.7% to 95.2%. Conclusions: A reliable and applicable instrument for evaluating the statistical intensity in research papers was developed. It is a helpful tool for comparing the statistical intensity between sub-fields and journals. The novel instrument may be applied in manuscript peer review to identify papers in need of additional statistical review. [ABSTRACT FROM AUTHOR]

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

When young children do not receive adequate amounts of the micronutrient iodine in their diet, their growth and cognitive development can be impaired. Nearly every country in the world has programs in place to track iodine intake and provide supplemental iodine if needed, usually in the form of fortified salt. The iodine nutrition status of a population can be tracked by monitoring iodine levels in urine samples to see if the median value falls in the range of 100–300 micrograms of iodine per liter of urine (μg I/L), which indicates adequate or more than adequate iodine nutrition. Many low and middle-income countries (LMIC) do not have a laboratory capable of carrying out this challenging assay, so samples must be sent out for assay in external labs, which is expensive and time-consuming. In most LMIC, population iodine surveys are carried out every 5–10 years, which limits the utility of the data for program monitoring and evaluation. To solve this problem, we developed a field-friendly paper test card that uses the Sandell-Kolthoff reaction to measure urinary iodine levels. A blind internal validation study showed that 93% of samples (n = 60) of iodide in an artificial urine matrix were categorized correctly by visual analysis as deficient, adequate, or excessive for levels set forth by the World Health Organization. Quantitative measurements based on computer image analysis had an error of 40 ± 20 μg I/L (n = 35 for samples in the calibration range) and these results categorized 88% of the samples (n = 60) correctly. We employed lifecycle analysis principles to address the known toxicity of arsenic, which is an obligatory reagent in the Sandell-Kolthoff reaction. Disposal of the cards in a landfill (their most likely destination after use) could let arsenic leach into groundwater; toxicity characteristic leaching procedure (TCLP) tests showed that the level of arsenic leached from the cards was 28.78 ppm, which is above the United States Environmental Protection Agency’s limit of 5 parts per million for solid waste. We integrated a remediation module into the card. This module contains oxone, to oxidize As(III) to As(V) oxyacids, and the iron oxide goethite. TCLP testing showed that the leachable amount of arsenic was reduced by at least 97.6%—from 28.8 ppm to lower than 0.7 ± 0.7 ppm (n = 20). This upstream intervention rendered the test card suitable for landfilling while retaining its functionality to perform a critical public health evaluation. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

It is important to implement detection and assessment of plant diseases based on remotely sensed data for disease monitoring and control. Hyperspectral data of healthy leaves, leaves in incubation period and leaves in diseased period of wheat stripe rust and wheat leaf rust were collected under in-field conditions using a black-paper-based measuring method developed in this study. After data preprocessing, the models to identify the diseases were built using distinguished partial least squares (DPLS) and support vector machine (SVM), and the disease severity inversion models of stripe rust and the disease severity inversion models of leaf rust were built using quantitative partial least squares (QPLS) and support vector regression (SVR). All the models were validated by using leave-one-out cross validation and external validation. The diseases could be discriminated using both distinguished partial least squares and support vector machine with the accuracies of more than 99%. For each wheat rust, disease severity levels were accurately retrieved using both the optimal QPLS models and the optimal SVR models with the coefficients of determination (R2) of more than 0.90 and the root mean square errors (RMSE) of less than 0.15. The results demonstrated that identification and severity evaluation of stripe rust and leaf rust at the leaf level could be implemented based on the hyperspectral data acquired using the developed method. A scientific basis was provided for implementing disease monitoring by using aerial and space remote sensing technologies. [ABSTRACT FROM AUTHOR]

Manifold visualisation techniques are commonly used to visualise high-dimensional datasets in physical sciences. In this paper, we apply a recently introduced manifold visualisation method, slisemap, on datasets from physics and chemistry. slisemap combines manifold visualisation with explainable artificial intelligence. Explainable artificial intelligence investigates the decision processes of black box machine learning models and complex simulators. With slisemap, we find an embedding such that data items with similar local explanations are grouped together. Hence, slisemap gives us an overview of the different behaviours of a black box model, where the patterns in the embedding reflect a target property. In this paper, we show how slisemap can be used and evaluated on physical data and that it is helpful in finding meaningful information on classification and regression models trained on these datasets. [ABSTRACT FROM AUTHOR]

This document provides a summary of a special issue on smart sensors for structural health monitoring (SHM) and nondestructive evaluation (NDE). It discusses the importance of developing defect detection and monitoring techniques for structures to ensure their integrity and prevent failure. The document highlights the challenges faced in implementing SHM and NDE, as well as the various techniques and smart sensors used in these fields. It also provides an overview of 33 papers published in the special issue, covering topics such as sensor technology, signal processing, and field applications. The authors hope that these papers will inspire future research in these rapidly developing areas. [Extracted from the article]

The safety of chemicals, drugs, novel foods and genetically modified crops is often tested using repeat-dose sub-acute toxicity tests in rats or mice. It is important to avoid misinterpretations of the results as these tests are used to help determine safe exposure levels in humans. Treated and control groups are compared for a range of haematological, biochemical and other biomarkers which may indicate tissue damage or other adverse effects. However, the statistical analysis and presentation of such data poses problems due to the large number of statistical tests which are involved. Often, it is not clear whether a “statistically significant” effect is real or a false positive (type I error) due to sampling variation. The author's conclusions appear to be reached somewhat subjectively by the pattern of statistical significances, discounting those which they judge to be type I errors and ignoring any biomarker where the p-value is greater than p = 0.05. However, by using standardised effect sizes (SESs) a range of graphical methods and an over-all assessment of the mean absolute response can be made. The approach is an extension, not a replacement of existing methods. It is intended to assist toxicologists and regulators in the interpretation of the results. Here, the SES analysis has been applied to data from nine published sub-acute toxicity tests in order to compare the findings with those of the author's. Line plots, box plots and bar plots show the pattern of response. Dose-response relationships are easily seen. A “bootstrap” test compares the mean absolute differences across dose groups. In four out of seven papers where the no observed adverse effect level (NOAEL) was estimated by the authors, it was set too high according to the bootstrap test, suggesting that possible toxicity is under-estimated. [ABSTRACT FROM AUTHOR]

In an iterated non-cooperative game, if all the players act to maximize their individual accumulated payoff, the system as a whole usually converges to a Nash equilibrium that poorly benefits any player. Here we show that such an undesirable destiny is avoidable in an iterated Rock-Paper-Scissors (RPS) game involving two rational players, X and Y. Player X has the option of proactively adopting a cooperation-trap strategy, which enforces complete cooperation from the rational player Y and leads to a highly beneficial and maximally fair situation to both players. That maximal degree of cooperation is achievable in such a competitive system with cyclic dominance of actions may stimulate further theoretical and empirical studies on how to resolve conflicts and enhance cooperation in human societies. [ABSTRACT FROM AUTHOR]

Background: Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA) which independently analyzes the raw data and reports the results on its website. Objectives: This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis. Methods: Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy) and withdrawal due to adverse events (safety). As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report), followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy. Results: FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34) except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61) pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55) pairwise comparisons and were statistically significant in 5. The “signal” in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical. Conclusion: There was no empirical evidence to suggest biased estimates between the two sources. Increased and detailed transparency in publications would improve the understanding and credibility of published results. Further, the FDA report was found to be a useful source when data are missing in the published report (i.e. reporting bias). [ABSTRACT FROM AUTHOR]

Among about a thousand objects obtained by the Science Museum from Stephen Hawking's office is a blackboard full of cartoons and puns, both childishly silly and deeply scientifically meaningful. This blackboard is now one of the Museum's most popular objects thanks to its playful imagery and perhaps also its perceived fragility. But it is also one of the objects that best illustrates the scientific life of Stephen Hawking and his generation, and more broadly, it is an exemplar of the social and material culture of the postmodern epoch of theoretical physics in the decades around the turn of the twenty-first century. In this article, the curator of the Hawking Collection explains the importance of this blackboard, first through an account of its unexpected trajectory to becoming the Hawking Collection's most charismatic object, followed by a discussion of the general historical role of blackboards: their iconography, material culture, and value as historical sources and how their conservation requirements contribute to their perceived value. The author then delves deeper into the specific content of this blackboard, showing how it constitutes a window into the highs and lows of a generation of physicists inspired by Hawking's work, as they attempted, and ultimately failed, to unify the two great theories of the twentieth century: general relativity and quantum mechanics. What we now call the superspace and supergravity blackboard is a microcosm of one of those moments in physics when theory broke away from what was empirically verifiable. The scribblings on the blackboard were collectively drawn by an up-and-coming generation of supersymmetry theorists. It immortalises the promising early years of supergravity, one of the hopeful candidates at the time for the long-wished-for Theory of Everything. Preserved in chalk are the seeds of one of the most brilliant theoretical discoveries of the turn of the century: what is now called the holographic principle. But also, seen with the benefit of hindsight, supersymmetric approaches seeded the identity crisis that theoretical physics is experiencing today, especially around the role of empirical anchoring of proposed fundamental theories. The contested status of the blackboard's content and its humorous, self-ironic style, make it a key piece of a unique zeitgeist of physics at the turn of the twenty-first century, which one could call the era of postmodern physics. In addition to its significance to the history of specific ideas, this paper also argues that the blackboard reflects the collective, social nature of theoretical research, while also inviting reflection on what constitutes success and failure in the physical sciences. [ABSTRACT FROM AUTHOR]

The article presents several rules for restructuring papers to avoid losing readers. Authors are instructed to focus their papers on a central contribution and to concentrate on the context-content-conclusion (C-C-C) scheme. They are also advised to optimize a paper's logical flow by avoiding zig-zag and using parallelism and to include complete story in the abstract.

Comments on Eric Scerri’s research paper on quantum mechanics and if it explains the periodic table. Ab initio quantum chemistry; Analysis of pertinent topics and relevant issues; Implications on studies of chemistry.

White birch (Betula papyrifera) is a dominant tree species of the Boreal Forest. Recent studies have shown that it is fairly resistant to heavy metal contamination, specifically to nickel. Knowledge of regulation of genes associated with metal resistance in higher plants is very sketchy. Availability and annotation of the dwarf birch (B. nana) enables the use of high throughout sequencing approaches to understanding responses to environmental challenges in other Betula species such as B. papyrifera. The main objectives of this study are to 1) develop and characterize the B. papyrifera transcriptome, 2) assess gene expression dynamics of B. papyrifera in response to nickel stress, and 3) describe gene function based on ontology. Nickel resistant and susceptible genotypes were selected and used for transcriptome analysis. A total of 208,058 trinity genes were identified and were assembled to 275,545 total trinity transcripts. The transcripts were mapped to protein sequences and based on best match; we annotated the B. papyrifera genes and assigned gene ontology. In total, 215,700 transcripts were annotated and were compared to the published B. nana genome. Overall, a genomic match for 61% transcripts with the reference genome was found. Expression profiles were generated and 62,587 genes were found to be significantly differentially expressed among the nickel resistant, susceptible, and untreated libraries. The main nickel resistance mechanism in B. papyrifera is a downregulation of genes associated with translation (in ribosome), binding, and transporter activities. Five candidate genes associated to nickel resistance were identified. They include Glutathione S–transferase, thioredoxin family protein, putative transmembrane protein and two Nramp transporters. These genes could be useful for genetic engineering of birch trees. [ABSTRACT FROM AUTHOR]

Background: Little is known about how adverse events are summarised and reported in trials, as detailed information is usually considered confidential. We have acquired clinical study reports (CSRs) from the European Medicines Agency through the Freedom of Information Act. The CSRs describe the results of studies conducted as part of the application for marketing authorisation for the slimming pill orlistat. The purpose of this study was to study how adverse events were summarised and reported in study protocols, CSRs, and published papers of orlistat trials.Methods and Findings: We received the CSRs from seven randomised placebo controlled orlistat trials (4,225 participants) submitted by Roche. The CSRs consisted of 8,716 pages and included protocols. Two researchers independently extracted data on adverse events from protocols and CSRs. Corresponding published papers were identified on PubMed and adverse event data were extracted from this source as well. All three sources were compared. Individual adverse events from one trial were summed and compared to the totals in the summary report. None of the protocols or CSRs contained instructions for investigators on how to question participants about adverse events. In CSRs, gastrointestinal adverse events were only coded if the participant reported that they were "bothersome," a condition that was not specified in the protocol for two of the trials. Serious adverse events were assessed for relationship to the drug by the sponsor, and all adverse events were coded by the sponsor using a glossary that could be updated by the sponsor. The criteria for withdrawal due to adverse events were in one case related to efficacy (high fasting glucose led to withdrawal), which meant that one trial had more withdrawals due to adverse events in the placebo group. Finally, only between 3% and 33% of the total number of investigator-reported adverse events from the trials were reported in the publications because of post hoc filters, though six of seven papers stated that "all adverse events were recorded." For one trial, we identified an additional 1,318 adverse events that were not listed or mentioned in the CSR itself but could be identified through manually counting individual adverse events reported in an appendix. We discovered that the majority of patients had multiple episodes of the same adverse event that were only counted once, though this was not described in the CSRs. We also discovered that participants treated with orlistat experienced twice as many days with adverse events as participants treated with placebo (22.7 d versus 14.9 d, p-value < 0.0001, Student's t test). Furthermore, compared with the placebo group, adverse events in the orlistat group were more severe. None of this was stated in the CSR or in the published paper. Our analysis was restricted to one drug tested in the mid-1990s; our results might therefore not be applicable for newer drugs.Conclusions: In the orlistat trials, we identified important disparities in the reporting of adverse events between protocols, clinical study reports, and published papers. Reports of these trials seemed to have systematically understated adverse events. Based on these findings, systematic reviews of drugs might be improved by including protocols and CSRs in addition to published articles. [ABSTRACT FROM AUTHOR]

Examines Tobler's First Law of Geography, that everything is related to everything else, but near things are more related than distant things. Nature of scientific laws from the perspective of the philosophy of science literature; Science studies; Local construction of the law.

In this addendum to our paper (2010 New J. Phys. 12 033024), we point out that an elementary consequence of the strong subadditivity inequality allows us to strengthen one of the main conclusions of that paper. [ABSTRACT FROM AUTHOR]

Basic color terms used in Mandarin Chinese have been controversial since first discussed by Berlin and Kay in 1969. Previous studies showed much inconsistency on what should be considered as basic color terms in Mandarin Chinese. In the present study, we investigated categories of color rather than merely the color terms used by Taiwanese native Mandarin speakers. Using samples conforming to the Berlin and Kay survey, various colors were chosen from a collection of Natural Color System (NCS) colored papers and mounted on a piece of neutral gray card. The card was then mounted on a touch-screen, under D65 illumination. Thirty-two single-character color related Mandarin terms were selected from a Chinese character database according to frequency of use. Participants were required to select the color sample that matched the term by pressing a virtual button on the touch screen. The results show that certain terms can be directly correlated to basic color terms in English, comparable with the results of Berlin and Kay’s original study and those that followed. However, some terms, such as Mo (墨 ink), Tie (鐵 iron), and Cai (菜vegetable), show a wide spread of term maps and inconsistent use among subjects. Principle component analysis (PCA) procedures were used to analysis the commodity of data among subjects. The findings suggest that the basic color categories among Mandarin Chinese speakers are similar to those found in the World Color Survey (WCS), but are represented by wide-spread and inconsistent color terms among speakers. [ABSTRACT FROM AUTHOR]

We have developed a new litmus paper test (DipTest) for detecting Escherichia coli (E. coli) in water samples by performing enzymatic reactions directly on the porous paper substrate. The paper strip consists of a long narrow piece of cellulose blotting paper coated with chemoattractant (at bottom edge), wax hydrophobic barrier (at the top edge), and custom formulated chemical reagents (at reaction zone immediately below the wax hydrophobic barrier). When the paper strip is dipped in water, E. coli in the water sample is attracted toward the paper strip due to a chemotaxic mechanism followed by the ascent along the paper strip toward the reaction zone due to a capillary wicking mechanism, and finally the capillary motion is arrested at the top edge of the paper strip by the hydrophobic barrier. The E. coli concentrated at the reaction zone of the paper strip will react with custom formulated chemical reagents to produce a pinkish-red color. Such a color change on the paper strip when dipped into water samples indicates the presence of E. coli contamination in potable water. The performance of the DipTest device has been checked with different known concentrations of E. coli contaminated water samples using different dip and wait times. The DipTest device has also been tested with different interfering bacteria and chemical contaminants. It has been observed that the different interfering contaminants do not have any impact on the DipTest, and it can become a potential solution for screening water samples for E. coli contamination at the point of source. [ABSTRACT FROM AUTHOR]

In 2014, an intervention paper was published in I The Canadian Geographer/Le Géographe canadien i , calling for greater integration of physical and critical human geography, through an intellectual practice termed I critical physical geography i (Lave et al., [16]). Bruce Rhoads, one of the authors of the original CPG Intervention piece (Lave et al., [16]), phrased this critique clearly in a recent paper: [T]he extent to which CPG differs fundamentally from political ecology ... remains unclear. In doing so, the authors advance CPG scholarship by (1) creating new trading zones and creoles distinctive to CPG, and (2) developing and applying their own interactional expertise in ways that contribute to the fuller realization of CPG's three core tenets. Almost a decade after the publication of the initial CPG intervention piece, CPG is expanding into new topics (e.g., predator reintroduction, urban climatology), new methodologies (e.g., dendroprovenancing, network analysis), and new conversations with allied fields (e.g., Black Geographies, Indigenous Geographies, Queer Ecologies). [Extracted from the article]

This review is a critical analysis of the current state-of-the-art in core spun yarn textile triboelectric nanogenerators (CSY-T-TENGs) for self-powered smart sensing applications. The rapid expansion of wireless communication, flexible conductive materials, and wearable electronics over the last ten years is now demanding autonomous energy, which has created a new research space in the field of wearable T-TENGs. Current research is exploring T-TENGs made from CSYs as stable and reliable energy harvesters and sensing devices for modern wearable IoT platforms. CSY-TENGs are emerging as an important technology due to its simple structure, low cost, and excellent performance in converting mechanical energy into electrical energy and due to its sensing ability. This paper provides a critical review on current progress, it analyzes the unique advantages of CSYs T-TENGs over conventional T-TENGs, it describes fabrication techniques and discusses the materials used along with their properties and electrical performance characteristics, and it highlights the recent advancements in their integration with self-excitation circuits, charge storage devices and IoT-enabled smart sensing applications, such as environmental and health monitoring. In the conclusion, it discusses the challenges and future directions of CSYs T-TENGs and it provides a future road map for optimization, upscaling, and commercialization of the technology. [ABSTRACT FROM AUTHOR]

The rise of China as a scientific research superpower has been frequently discussed in media and literature. However, past analyses are usually based on the geographical database and they ignore how the millions of emigrated Chinese students, who are now being considered the major research workforce in many countries, affect their academic outputs. Here we quantitatively analyze the contribution of Chinese scholars in physical science around the globe by their publications in a country's papers from 2010 to 2021 as well as their citations. Contrary to common perception, we find that increasing the number of Chinese scholars does not correlate with the net publication growth or decline in their host countries before the Chinese population exceeds a critical value. On the other hand, increasing Chinese authors in a paper improves its citations. The phenomena, though anomalous, are observed in many subfields of physics across the globe. Our analysis suggests that although Chinese scholars do not change the perceived publication capabilities of many countries but may have reshaped their research culture as well as workforce distributions. The results would be valuable for R&D, higher education, and immigration policymakers. [ABSTRACT FROM AUTHOR]

Scientists often perceive a trade-off between quantity and quality in scientific publishing: finite amounts of time and effort can be spent to produce few high-quality papers or subdivided to produce many papers of lower quality. Despite this perception, previous studies have indicated the opposite relationship, in which productivity (publishing more papers) is associated with increased paper quality (usually measured by citation accumulation). We examine this question in a novel way, comparing members of the National Academy of Sciences with themselves across years, and using a much larger dataset than previously analyzed. We find that a member’s most highly cited paper in a given year has more citations in more productive years than in in less productive years. Their lowest cited paper each year, on the other hand, has fewer citations in more productive years. To disentangle the effect of the underlying distributions of citations and productivities, we repeat the analysis for hypothetical publication records generated by scrambling each author’s citation counts among their publications. Surprisingly, these artificial histories re-create the above trends almost exactly. Put another way, the observed positive relationship between quantity and quality can be interpreted as a consequence of randomly drawing citation counts for each publication: more productive years yield higher-cited papers because they have more chances to draw a large value. This suggests that citation counts, and the rewards that have come to be associated with them, may be more stochastic than previously appreciated. [ABSTRACT FROM AUTHOR]

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents. [ABSTRACT FROM AUTHOR]

Objective: Detection of vascular endothelial growth factor (VEGF) levels in ocular tissue may perhaps provide insight into the role of VEGF in the pathogenesis and progression of diabetic retinopathy (DR). The aim of this study was to evaluate the levels of VEGF in tears and serum amongst type 2 diabetes mellitus (DM) patients. Methods: A comparative cross-sectional study was conducted between August 2016 and May 2018 involving type 2 DM patients with no DR, non-proliferative DR (NPDR), and proliferative DR (PDR). Tear samples were collected using no.41 Whatman filter paper (Schirmer strips) and 5 mL blood samples were drawn by venous puncture. VEGF levels in tears and serum were measured by enzyme-linked immunosorbent assay. Results: A total of 88 type 2 DM patients (no DR: 30 patients, NPDR: 28 patients, PDR: 30 patients) were included in the study. Mean tear VEGF levels were significantly higher in the NPDR and PDR groups (114.4 SD 52.5 pg/mL and 150.8 SD 49.7 pg/mL, respectively) compared to the no DR group (40.4 SD 26.5 pg/mL, p < 0.001). There was no significant difference in the mean serum VEGF levels between the three groups. There was a fair correlation between serum and tear VEGF levels (p = 0.015, r = 0.263). Conclusion: VEGF levels in tears were significantly higher amongst diabetic patients with DR compared to those without DR and were significantly associated with the severity of DR. There was a fair correlation between serum and tear VEGF levels. Detection of VEGF in tears is a good non-invasive predictor test for the severity of DR. A large cohort study is needed for further evaluation. [ABSTRACT FROM AUTHOR]

In this paper, we suggest an iterative method for solving nonlinear equations that can be used in the physical sciences. This response is broken down into three parts. Our methodology is inspired by both the standard Taylor's method and an earlier Halley's method. Three evaluations of the given function and two evaluations of its first derivative are all that are needed for each iteration with this method. Because of this, the unique methodology can complete its goal far more quickly than many of the other methods currently in use. We looked at several additional practical research models, including population growth, blood rheology, and neurophysiology. Polynomiographs can be used to show the convergence zones of certain polynomials with complex values. Polynomiographs are produced as a byproduct, and these end up having an appealing look and being artistically engaging. The twisting of polynomiographs is symmetric when the parameters are all real and asymmetric when some of the parameters are imaginary. [ABSTRACT FROM AUTHOR]

Written communication plays a crucial role in the history of modern civilizations as manuscripts do not only exist contemporarily, but are passed on to subsequent generations. Besides a document’s content, information is stored in the materials used for its production. Analyses of the composition allow, for example, identifying the biological origins of materials, dating, and help to understand degradation patterns. A combination of microscopic and DNA approaches was applied in order to analyze various plant derived writing sheets. Given their diversity and abundance in museum collections, plant based writing supports are yet an underexplored target for DNA studies. DNA retrieval of paper is low compared to raw paper plant material, which is likely due to the loss of organic components during paper production. Optimizing DNA extraction for each respective material drastically increased DNA recovery. Finally, we present a non-invasive DNA sampling method that utilizes nylon membranes, commonly used for bacterial DNA sampling and that is applicable to delicate material. Although bacterial infestation was visible on one sample, as indicated by scanning electron microscopy, endogenous DNA was retrieved. The results presented here are promising as they extend the scope of sources for DNA analyses by demonstrating that DNA molecules can be retrieved from a variety of plant derived writing supports. In future, such analyses can help to explore the biological diversity not only of plants and of additives utilized for producing writing supports, but also of the plenty products made from paper. [ABSTRACT FROM AUTHOR]

Quaternionic Hilbert spaces play an important role in applied physical sciences especially in quantum physics. In this paper, the operator valued frames on quaternionic Hilbert spaces are introduced and studied. In terms of a class of partial isometries in the quaternionic Hilbert spaces, a parametrization of Parseval operator valued frames is obtained. We extend to operator valued frames many of the properties of vector frames on quaternionic Hilbert spaces in the process. Moreover, we show that all the operator valued frames can be obtained from a single operator valued frame. Finally, several results for operator valued frames concerning duality, similarity of such frames on quaternionic Hilbert spaces are presented. [ABSTRACT FROM AUTHOR]