Search

We developed a methodology for the cost optimization of electrokinetic treatment porous media contaminated by toxic metals. A two-dimensional reactive-transport model was implemented to simulate the transport of chemical species by diffusion, electromigration and electroosmosis, coupled with a geochemical model which calculates precipitation and dissolution of species, adsorption and desorption reactions, and aqueous speciation. The model was applied to the case study of an electrokinetic remediation prototype plant built in Livorno (Italy), treating 150 m 3 of dredged sediments contaminated by toxic metals. The plant consisted of an ex-situ treatment basin equipped with electrodic wells arranged on a rectangular grid, connected to an electrolyte management system for catholyte and anolyte pH control. We validated the model by comparing the simulated electric field with the measured electric potential and the simulated pH profiles with the pH values of field samples. Good agreement was achieved between the modelled and measured data. On the basis of the validated model, we performed a parametric study to evaluate the influence of electrode distance and sediment buffering capacity on treatment costs and calculated the overall cost as a function of these two parameters. The results and costs were evaluated in terms of Pb removal, which was taken as the representative toxic metal. The results revealed the existence of distinct minima, representing the best set of parameters which optimized the overall treatment costs. We believe that the methodology and results obtained can be employed as a valuable tool to support the evaluation and design of electrokinetic remediation systems. [ABSTRACT FROM AUTHOR]

In this paper we investigated the presence of Polycyclic Aromatic Hydrocarbons and Polychlorobiphenyls in a 50-m deep snow/firn core collected at the peripheral site GV7 in East Antarctica during the 2013–2014 XXIX Italian expedition. The concentration depth profile was obtained on the basis of the total concentration of fourteen PAHs and seven PCBs individually determined by gas chromatography triple quadrupole mass spectrometry. Both classes of pollutants showed synchronized concentration vs time profile throughout the whole period of time covered by the snow/firn core (1892–2012). A correlation between major explosive volcanic eruptions and the concentration maxima of the pollutants was found. PAH maximum (9 ng/L) was about twice the background level (5 ng/L). PCBs showed a similar but more limited trend with barely visible volcanic maxima. This concurrence highlights the contribution of the major explosive volcanic events to the global contamination level for PAHs, as expected, but also for PCBs whose industrial production and use began in 1930. Excluding the maximum values, PAHs and PCBs showed an increase in the period 1956–1986: PCBs from about 0.05 to 0.21 ng/l (400% increase), and PAHs from about 3.5 to 7.8 ng/l (100% increase). Finally, in the last decade (2000–2010) the trend of these pollutants was different: (i) PCBs constantly decrease (from 0.15 ng/L to 0.10 ng/L), thanks to the implemented restriction on their production and on their use only in closed systems in many countries; (ii) PAHs remains practically constant around 6.5 ng/L. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) quantification in benthic marine sediments is typically performed by time-consuming and moderately accurate mechanical separation and microscopy detection. In this paper, we describe the results of our innovative Polymer Identification and Specific Analysis (PISA) of microplastic total mass, previously tested on either less complex sandy beach sediment or less demanding (because of the high MPs content) wastewater treatment plant sludges, applied to the analysis of benthic sediments from a sublittoral area north-west of Leghorn (Tuscany, Italy). Samples were collected from two shallow sites characterized by coarse debris in a mixed seabed of Posidonia oceanica, and by a very fine silty-organogenic sediment, respectively. After sieving at <2 mm the sediment was sequentially extracted with selective organic solvents and the two polymer classes polystyrene (PS) and polyolefins (PE and PP) were quantified by pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS). A contamination in the 8–65 ppm range by PS could be accurately detected. Acid hydrolysis on the extracted residue to achieve total depolymerization of all natural and synthetic polyamides, tagging of all aminated species in the hydrolysate with a fluorophore, and reversed-phase high performance liquid chromatography (HPLC) (RP-HPLC) analysis, allowed the quantification within the 137–1523 ppm range of the individual mass of contaminating nylon 6 and nylon 6,6, based on the detected amounts of the respective monomeric amines 6-aminohexanoic acid (AHA) and hexamethylenediamine (HMDA). Finally, alkaline hydrolysis of the residue from acid hydrolysis followed by RP-HPLC analysis of the purified hydrolysate showed contamination by polyethylene terephthalate (PET) in the 12.1–2.7 ppm range, based on the content of its comonomer, terephthalic acid. [ABSTRACT FROM AUTHOR]

Iodine is considered as a feasible alternative to xenon as a propellant for electric propulsion systems, thanks to its good propulsive performance, high availability, and high storage density. However, as iodine is stored in solid state at ambient temperature, current state-of-the-art propellant management systems are not suitable to be used with it. Moreover, due to its high reactivity, iodine imposes requirements on material-compatibility, hindering the use of mass flow measurement and control systems typically used with other propellants. The architecture of a controlled iodine feeding system for low power (200 W class) ion and Hall effect thrusters is presented and the resulting prototype is described. It consists of a sublimation assembly whose temperature is used to control the tank pressure, a normally-closed ON-OFF valve, and a thermal throttle to perform the fine control of the mass flow rate. A 1D thermal-fluid model concerning the vapor generation in the tank, and its evolution along the different components is detailed. The thermal throttle model has been experimentally verified using air as a working fluid. The model results agree with the measurements of the verification tests in the hypothesis of the presence of an extended region at the entrance of the pipe where the laminar flow velocity and temperature profiles are not fully developed (known as entry flow region). Finally, the system is experimentally characterized and the model of the full system is calibrated using experimental measurements. The calibration shows that the thermal throttle flow presents an entry flow region, that the viscosity is correctly modeled, and that there is a difference between the measured tank temperature and the effective sublimation temperature. [ABSTRACT FROM AUTHOR]

Pollution from microplastics (MPs) has become one of the most relevant topics in environmental chemistry. The risks related to MPs include their capability to adsorb toxic and harmful molecular species, and to release additives and degradation products into ecosystems. Their role as a primary source of a broad range of harmful volatile organic compounds (VOCs) has also been recently reported. In this work, we applied a non-destructive approach based on selected-ion flow tube mass spectrometry (SIFT-MS) for the characterization of VOCs released from a set of plastic debris collected from a sandy beach in northern Tuscany. The interpretation of the individual SIFT-MS spectra, aided by principal component data analysis, allowed us to relate the aged polymeric materials that make up the plastic debris (polyethylene, polypropylene, and polyethylene terephthalate) to their VOC emission profile, degradation level, and sampling site. The study proves the potential of SIFT-MS application in the field, as a major advance to obtain fast and reliable information on the VOCs emitted from microplastics. The possibility to obtain qualitative and quantitative data on plastic debris in less than 2 min also makes SIFT-MS a useful and innovative tool for future monitoring campaigns involving statistically significant sets of environmental samples. Image 1 • VOCs released from plastic debris were analyzed non-destructively by SIFT-MS. • Aged polymeric materials were characterized based on their SIFT-MS spectra. • PCA analysis of spectra correlated VOC profile, degradation level and sampling site. • SIFT-MS provided fast and reliable information on the VOCs emitted by microplastics. [ABSTRACT FROM AUTHOR]