Search

Ripening is the most crucial process step in cheese manufacturing and constitutes multiple biochemical alterations that describe the final cheese quality and its perceived sensory attributes. The assessment of the cheese-ripening process is challenging and requires the effective analysis of a multitude of biochemical changes occurring during the process. This study monitored the biochemical and sensory attribute changes of paraffin wax-covered long-ripening hard cheeses (n = 79) during ripening by collecting samples at different stages of ripening. Near-infrared hyperspectral (NIR-HS) imaging, together with free amino acid, chemical composition, and sensory attributes, was studied to monitor the biochemical changes during the ripening process. Orthogonal projection-based multivariate calibration methods were used to characterize ripening-related and orthogonal components as well as the distribution map of chemical components. The results approve the NIR-HS imaging as a rapid tool for monitoring cheese maturity during ripening. Moreover, the pixelwise evaluation of images shows the homogeneity of cheese maturation at different stages of ripening. Among the chemical compositions, fat content and moisture are the most important variables correlating to NIR-HS images during the ripening process. [ABSTRACT FROM AUTHOR]

Background: Impaired autonomic control of postural homeostasis results in orthostatic intolerance. However, the role of neurohormones in orthostatic intolerance has not been explained. Methods: Six-hundred-and-seventy-one patients (299 males; 55±22 years) with unexplained syncope underwent head-up tilt (HUT) with serial blood sampling. Systolic blood pressure (SBP) and heart rate (HR) supine, after 3min, and lowest BP/highest HR during HUT were recorded. Plasma levels of epinephrine, norepinephrine, renin, C-terminal-pro-arginine-vasopressin (CT-proAVP), C-terminal- endothelin-1 (CT-proET-1), and mid-regional-fragment of pro-atrial-natriuretic-peptide (MR-proANP) were determined at supine and 3min of HUT. Multivariate-adjusted logistic regression model was applied to compare 1st (reference) with 4th quartile of 3 min and maximal ΔSBP/ΔHR (i.e. pronounced hypotension or tachycardia) vs. changes in neuroendocrine biomarkers, respectively. Results: Higher resting CT-proET-1 predicted BP fall at 3min (Odds ratio (OR) per 1 SD: 1.62, 95%CI 1.18–2.22; p = 0.003), and max BP fall during HUT (1.82, 1.28–2.61; p = 0.001). Higher resting CT-proAVP predicted BP fall at 3min (1.33, 1.03–1.73; p = 0.03), which was also associated with increase in CT-proAVP (1.86, 1.38–2.51; p = 0.00005) and epinephrine (1.47, 1.12–1.92; p = 0.05) during HUT. Lower resting MR-proANP predicted tachycardia at 3min (0.37, 0.24–0.59; p = 0.00003), and max tachycardia during HUT (0.47, 0.29–0.77; p = 0.002). Further, tachycardia during HUT was associated with increase in epinephrine (1.60, 1.15–2.21; p = 0.005), and norepinephrine (1.87, 1.38–2.53; p = 0.005). Conclusions: Resting CT-proET-1 and CT-proAVP are increased in orthostatic hypotension, while resting MR-proANP is decreased in postural tachycardia. Moreover, early BP fall during orthostasis evokes increase in CT-proAVP and epinephrine, while postural tachycardia is associated with increase in norepinephrine and epinephrine. [ABSTRACT FROM AUTHOR]

Major institutional reforms are currently under way to improve the performance of the public water sector in Kenya. However, a historical perspective is needed in order to achieve sustainable improvements that will also benefit the urban poor. This article seeks to provide such a perspective, applying a cross-disciplinary and socio-technical approach to urban water supply over the last century, in which institutions, organisations and technology are seen to interact with political, economic and demographic processes. Despite a series of reforms over the years, the socio-technical structure of the urban water sector in Kenya has shown a remarkable stability since the 1920s, and into the 1980s. However, the sustainability of the public service systems has been eroded since independence, due to changes in the institutional framework surrounding the systems, while exclusive standards and technological choices have essentially been preserved from the colonial era. Current sector reform must create incentives for addressing technology choices and service standards in order to provide public water services also for the urban poor. [ABSTRACT FROM AUTHOR]

Current therapies for neurological disorders are based on traditional medication and electric stimulation. Here, we present an organic electronic biomimetic neuron, with the capacity to precisely intervene with the underlying malfunctioning signalling pathway using endogenous substances. The fundamental function of neurons, defined as chemical-to-electrical-to-chemical signal transduction, is achieved by connecting enzyme-based amperometric biosensors and organic electronic ion pumps. Selective biosensors transduce chemical signals into an electric current, which regulates electrophoretic delivery of chemical substances without necessitating liquid flow. Biosensors detected neurotransmitters in physiologically relevant ranges of 5–80 µM, showing linear response above 20 µm with approx. 0.1 nA/µM slope. When exceeding defined threshold concentrations, biosensor output signals, connected via custom hardware/software, activated local or distant neurotransmitter delivery from the organic electronic ion pump. Changes of 20 µM glutamate or acetylcholine triggered diffusive delivery of acetylcholine, which activated cells via receptor-mediated signalling. This was observed in real-time by single-cell ratiometric Ca 2+ imaging. The results demonstrate the potential of the organic electronic biomimetic neuron in therapies involving long-range neuronal signalling by mimicking the function of projection neurons. Alternatively, conversion of glutamate-induced descending neuromuscular signals into acetylcholine-mediated muscular activation signals may be obtained, applicable for bridging injured sites and active prosthetics. [ABSTRACT FROM AUTHOR]

Magnetoelectric (magnetic/piezoelectric) heterostructures bring new functionalities to develop novel transducer devices such as (wireless) sensors or energy harvesters and thus have been attracting research interest in the last years. We have studied the magnetoelectric coupling between Metglas films (2826 MB) and poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) in a laminate structure. The metallic Metglas film itself served as bottom electrode and as top electrode we used an electrically conductive polymer, poly(3,4-ethylene-dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). Besides a direct electrical wiring via a graphite ink, a novel contactless readout method is presented using a capacitive coupling between the PEDOT:PSS layer and an electrode not in contact with the PEDOT:PSS layer. From the experimental result we determined a magnetoelectric coupling of 1445 V/(cm·Oe) at the magnetoelastic resonance of the structure, which is among the highest reported values for laminate structures of a magnetostrictive and a piezoelectric polymer layer. With the noncontact readout method, a magnetoelectric coupling of about 950 V/(cm·Oe) could be achieved, which surpasses previously reported values for the case of direct sample contacting. 2D laser Doppler vibrometer measurements in combination with FE simulations were applied to reveal the complex vibration pattern resulting in the strong resonant response. [ABSTRACT FROM AUTHOR]

Background: ECG (Electrocardiogram) measurements in home health care demands new sensor solutions. In this study, six different configurations of screen printed conductive ink electrodes have been evaluated with respect to electrode potential variations and electrode impedance. Methods: The electrode surfaces consisted of a Ag/AgCl-based ink with a conduction line of carbon or Ag-based ink underneath. On top, a lacquer layer was used to define the electrode area and to cover the conduction lines. Measurements were performed under well-defined electro-chemical conditions in a physiologic saline solution. Results: The results showed that all printed electrodes were stable and have a very small potential drift (less than 3 mV/30 min). The contribution to the total impedance was 2% of the set maximal allowed impedance (maximally 1 kΩ at 50 Hz), assuming common values of input impedance and common mode rejection ratio of a regular amplifier. Conclusion: Our conclusions are that the tested electrodes show satisfying properties to be used as elements in a skin electrode design that could be suitable for further investigations by applying the electrodes on the skin. [ABSTRACT FROM AUTHOR]

In this study, we investigated the variation in the microbial community present in bulk tank milk samples and the potential effect of different farm management factors. Bulk tank milk samples were collected repeatedly over one year from 42 farms located in northern Sweden. Total and thermoresistant bacteria counts and 16S rRNA gene-based amplicon sequencing were used to characterize microbial community composition. The microbial community was in general heterogeneous both within and between different farms and the community composition in the bulk tank milk was commonly dominated by Pseudomonas , Acinetobacter , Streptococcus , unclassified Peptostreptococcaceae , and Staphylococcus. Principal component analysis including farm factor variables and microbial taxa data revealed that the microbial community in milk was affected by type of milking system. Milk from farms using an automatic (robot) milking system (AMS) and loose housing showed different microbial community composition compared with milk from tiestall farms. A discriminant analysis model revealed that this difference was dependent on several microbial taxa. Among farms using an automatic milking system, there were further differences in the microbial community composition depending on the brand of the milking robot used. On tiestall farms, routines for teat preparation and cleaning of the milking equipment affected the microbial community composition in milk. Total bacteria count (TBC) in milk differed between the farm types, and TBC were higher on AMS than tiestall farms (log 4.05 vs. log 3.79 TBC/mL for AMS and tiestalls, respectively). Among tiestall farms, milk from farms using a chemical agent in connection to teat preparation and a more frequent use of acid to clean the milking equipment had lower TBC in milk, than milk from farms using water for teat preparation and a less frequent use of acid to clean the milking equipment (log 3.68 vs. 4.02 TBC/mL). There were no significant differences in the number of thermoresistant bacteria between farm types. The evaluated factors explained only a small proportion of total variation in the microbiota data, however, despite this, the study highlights the effect of routines associated with teat preparation and cleaning of the milking equipment on raw milk microbiota, irrespective of type of milking system used. [ABSTRACT FROM AUTHOR]

Background/purpose: Near-infrared (NIR) spectroscopy and skin impedance (IMP) measurements are useful techniques for objective diagnostics of various skin diseases. Here, we present a combined probe head for simultaneous, time-saving NIR spectroscopy and skin impedance measurements. The probe also ensures that both measurements are performed under equal conditions and at the same skin location. Methods: Finite element method simulations were performed for evaluation of the impedance. In vivo skin measurements were performed and combined NIR and impedance spectra were analysed by means of multivariate methods with respect to body location, age and gender. The classification rate was determined by a planar discriminant analysis. Reproducibility was investigated by calculation of scatter values and statistical significance between overlapping groups was assessed by the calculation of intra-model distances, q. Results: The novel probe yielded rapid reproducible results and was easy to manage. Significant differences between skin locations and to a lesser extent age groups and gender were demonstrated. Conclusion: With the novel probe, statistically significant differences between overlapping classes in score plots can be confirmed by calculating intra-model distances. The influence of molecular differences in the skin at different body locations is larger than the influence of gender or age and therefore relevant reference measurements are discussed. [ABSTRACT FROM AUTHOR]

This study was part of a larger project that aimed to understand the causes for increasing variation in cheese ripening in a cheese-producing region in northern Sweden. The influence of different on-farm factors on raw milk composition and properties was investigated and is described in this paper, whereas the monthly variation in the milk quality traits during 1 yr is described in our companion paper. The dairy farming systems on a total of 42 dairy farms were characterized through a questionnaire and farm visits. Milk from farm tanks was sampled monthly over 1 yr and analyzed for quality attributes important for cheese making. On applying principal component analyses to evaluate the variation in on-farm factors, different types of farms were distinguished. Farms with loose housing and automatic milking system (AMS) or milking parlor had a higher number of lactating cows, and predominantly Swedish Holstein (SH) breed. Farms associated with tiestalls had a lower number of lactating cows and breeds other than SH. Applying principal component analyses to study the variation in composition and properties of tank milk samples from farms revealed a tendency for the formation of 2 clusters: milk from farms with AMS or a milking parlor, and milk from farms with tiestall milking. The interaction between the milking system, housing system, and breed probably contributed to this grouping. Other factors that were used in the characterization of the farming systems only showed a minor influence on raw milk quality. Despite the interaction, milk from tiestall farms with various cow breeds had higher concentrations (g/100 g of milk) of fat (4.74) and protein (3.63), and lower lactose concentrations (4.67) than milk from farms with predominantly SH cows and AMS (4.32, 3.47, and 4.74 g/100 g of milk, respectively) or a milking parlor (4.47, 3.54, and 4.79 g/100 g of milk, respectively). Higher somatic cell count (195 × 103/mL) and lower free fatty acid concentration (0.75 mmol/100 g of fat) were observed in milk from farms with AMS than in milk from tiestall systems (150 × 103/mL and 0.83 mmol/100 g of fat, respectively). Type of farm influenced milk gel strength, with milk from farms with predominantly SH cows showing the lowest gel strength (65.0 Pa), but not a longer rennet coagulation time. Effects of dairy farming system (e.g., dominant breed, milking system, housing, and herd size) on milk quality attributes indicate a need for further studies to evaluate the in-depth effects of farm-related factors on milk quality attributes. [ABSTRACT FROM AUTHOR]

This study investigated the influence of monthly variation on the composition and properties of raw farm milk collected as part of a full-scale cheese-making trial in a region in northern Sweden. In our companion paper, the contribution of on-farm factors to the variation in milk quality attributes is described. In total, 42 dairy farms were recruited for the study, and farm milk samples were collected monthly over 1 yr and characterized for quality attributes of importance for cheese making. Principal component analysis suggested that milk samples collected during the outdoor period (June–September) were different from milk samples collected during the indoor period. Despite the interaction with the milking system, the results showed that fat and protein concentrations were lower in milk collected during May through August, and lactose concentration was higher in milk collected during April through July than for the other months. Concentrations of free fatty acids were generally low, with the highest value (0.86 mmol/100 g of fat) observed in February and the lowest (0.70 mmol/100 g of fat) observed in June. Plasmin and plasminogen-derived activities varied with sampling month without a clear seasonal pattern. The pH of farm tank milk ranged from 6.60 to 6.82, with the lowest and highest values in September and February, respectively. The highest somatic cell count was observed in August (201 × 103 cells/mL) and the lowest in April (143 × 103 cells/mL). The highest value of gel strength, was recorded in December (88 Pa) and the lowest in July (64 Pa). Rennet coagulation time and gel strength were inversely correlated, with the lowest rennet coagulation time value observed in December. Orthogonal projections to latent structures (OPLS) and discriminant analysis adaptation of OPLS identified casein micelle size and total proteolysis as the milk quality attributes with major responses to sampling month, with smaller casein micelle size and higher total proteolysis associated with the outdoor months. Using discriminant analysis adaptation of OPLS to further investigate causes behind the variation in milk traits revealed that there were factors in addition to feeding on pasture that differed between outdoor and indoor months. Because fresh grass was seldom the primary feed in the region during the outdoor period, grazing was not considered the sole reason for the observed difference between outdoor and indoor periods in raw milk quality attributes. [ABSTRACT FROM AUTHOR]

The development of methods of non-invasive measurement of neck muscle function remains a priority in the clinical sciences. In this study, dorsal neck muscle deformation vs time curves (deformation area) were evaluated against incremental force, recorded from non-invasive real-time ultrasound measurement. The results revealed subject-specific moderate to strong linear or non-linear relationships between deformation and force. Test-retest variability showed strong reliability for all five neck muscles summed together and fair to good reliability for the five muscles evaluated separately. Multivariate statistics were used to analyse the interactions between the dorsal neck muscles during different percentages of maximal voluntary contraction (MVC). Low force (10–20% MVC) was related to muscle shortening; higher force (40–80% MVC) showed combination of shortening and elongation deformation in the muscle interactions. The muscle interactions during isometric MVC test were subject-specific, with different combinations and deformations of the five neck muscles. Force ≥40% MVC were associated with a forward movement of the cervical spine that affected the ultrasound measurement of the dorsal neck muscles. Ultrasound with speckle-tracking analyses may be best used to detect low levels (<40% MVC) of neck muscle activity. [ABSTRACT FROM AUTHOR]

The Cape Verde oceanic plateau hosts 10 islands and 11 seamounts and provides an extensive suite of alkaline lavas and pyroclastic rocks. The volcanic rocks host a range of crustal and mantle xenoliths. These xenoliths provide a spectrum of lithologies available to interact with magma during transport through the lithospheric mantle and crust. We explore the origin and depth of formation of crustal xenoliths to develop a framework of magma-crust interaction and a model for the crustal architecture beneath the Cape Verde oceanic plateau. The host lavas are phononephelinites to phonolites and the crustal xenoliths are mostly mafic plutonic assemblages with one sedimentary xenolith. REE profiles of clinopyroxene in the host lavas are light rare-earth element (LREE) enriched whereas clinopyoxene from the plutonic xenoliths are LREE depleted. Modelling of REE melt compositions indicates the plutonic xenoliths are derived from mid-ocean ridge basalt (MORB)-type ocean crust. Thermobarometry indicates that clinopyroxene in the host lavas formed at depths of 17 to 46 km, whereas those in the xenoliths formed at 5 to 20 km. This places the depth of origin of the plutonic xenoliths in the oceanic crust. Therefore, the xenoliths trace magma-crust interaction to the MORB oceanic crust and overlying sediments located beneath the Cape Verde oceanic plateau. [ABSTRACT FROM AUTHOR]

Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (loT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within loT applications. [ABSTRACT FROM AUTHOR]

Background: ECG (Electrocardiogram) measurements in home health care demands new sensor solutions. In this study, six different configurations of screen printed conductive ink electrodes have been evaluated with respect to electrode potential variations and electrode impedance.Methods: The electrode surfaces consisted of a Ag/AgCl-based ink with a conduction line of carbon or Ag-based ink underneath. On top, a lacquer layer was used to define the electrode area and to cover the conduction lines. Measurements were performed under well-defined electro-chemical conditions in a physiologic saline solution.Results: The results showed that all printed electrodes were stable and have a very small potential drift (less than 3 mV/30 min). The contribution to the total impedance was 2% of the set maximal allowed impedance (maximally 1 kΩ at 50 Hz), assuming common values of input impedance and common mode rejection ratio of a regular amplifier.Conclusion: Our conclusions are that the tested electrodes show satisfying properties to be used as elements in a skin electrode design that could be suitable for further investigations by applying the electrodes on the skin. [ABSTRACT FROM AUTHOR]

The interconnection between hard electronics and soft textiles remains a noteworthy challenge in regard to the mass production of textile–electronic integrated products such as sensorized garments. The current solutions for this challenge usually have problems with size, flexibility, cost, or complexity of assembly. In this paper, we present a solution with a stretchable and conductive carbon nanotube (CNT)-based paste for screen printing on a textile substrate to produce interconnectors between electronic instrumentation and a sensorized garment. The prototype connectors were evaluated via electrocardiogram (ECG) recordings using a sensorized textile with integrated textile electrodes. The ECG recordings obtained using the connectors were evaluated for signal quality and heart rate detection performance in comparison to ECG recordings obtained with standard pre-gelled Ag/AgCl electrodes and direct cable connection to the ECG amplifier. The results suggest that the ECG recordings obtained with the CNT paste connector are of equivalent quality to those recorded using a silver paste connector or a direct cable and are suitable for the purpose of heart rate detection. [ABSTRACT FROM AUTHOR]