Search

The initial melting quality of a high-speed laser cladding layer has an important impact on its post-treatment and practical application. In this study, based on the repair of hydraulic support columns of coal mining machines, the influence of high-speed laser cladding process parameters on the quality of Fe-Cr-Ni alloy coatings was investigated to realize the accurate prediction of coating quality. The Taguchi orthogonal method was used to design the L25(56) test. The prediction models of the relationship between the cladding process and the coating quality were established using the Random Forest (RF) and AdaBoost (Adaptive Boosting, AB) algorithms, respectively. Then, the prediction accuracy of the two models was compared, and the process parameter features were screened for importance evaluation. The results show that the AB prediction model is more accurate than the RF prediction model and more sensitive to abnormal data. The importance evaluation based on the AdaBoost model shows that the scanning speed has a great influence on the height and surface roughness of the coating. On the other hand, the overlap rate is the most important factor in controlling the dilution ratio and near-surface grain size of high-speed laser melting coatings. In addition, the micro-hardness of the coating and the thermal effect of the substrate can be effectively enhanced by adjusting the laser power and scanning speed. Finally, it was verified that the AB prediction model could accurately estimate the quality indexes of the coating with a prediction error less than 6%. The results show that it is feasible to predict the quality of high-speed laser cladding with the AB algorithm. It provides a basis for the adjustment of process parameters in the subsequent quality control process of cladding. [ABSTRACT FROM AUTHOR]

Due to the rapid advancement in processing efficiency, high-speed laser cladding has demonstrated significant potential in the repair and protection of various substrates. In this study, we established a comprehensive evaluation model for the coating quality of Fe-Cr-Ni-based alloy with high-speed laser cladding using the analytic hierarchy process and fuzzy comprehensive evaluation method (AHP-FCE). The weights obtained through the analytic hierarchy process for forming quality, microstructure, and surface performance are as follows: WB1 = 0.1365, WB2 = 0.2385, and WB3 = 0.625, respectively. During the fuzzy comprehensive evaluation step, an evaluation level was graded while quantifying the level range through membership function judgment. By combining subjective and objective evaluations, qualitative issues were transformed into quantitative assessment methods. Through comprehensive evaluation analysis, it was concluded that the scanning speed of high-speed laser cladding had a greater impact on coating thickness compared to powder feeding speed while significantly enhancing microstructure densification. The overlap rate exerted the most influence on dilution rate homogenization of near-surface dendrites. Simultaneously, the optimal preparation technology was determined: laser power 660 W, scanning speed 14,400 mm/min, overlap rate/min. This study transforms multi-objective quality evaluation of high-speed laser cladding coatings into a single objective problem by realizing comprehensive quality quantification and providing a new method for quantitative evaluation and visualization of coating quality. [ABSTRACT FROM AUTHOR]

In this paper, a laser-based directed energy deposition (DED) technique is used to fabricate FeCoNiCr and CrMnFeCoNi multi-principal-element alloys (MPEAs). Comparing the above samples, the FeCoNiCr samples with coarse columnar grains cracked, while the CrMnFeCoNi samples with equiaxed grain were crack-free. The strategy that removes cracks is to induce a columnar-grain-to-equiaxed-grain transition (CET) with Mn addition to offer more grain boundaries to withstand residual stress in the process of DED-fabricated FeCoNiCr and to help minimize hot cracking. Furthermore, the yield strength, tensile strength, and tensile ductility of the DED-fabricated CrMnFeCoNi obviously improved compared with the DED-fabricated CoCrFeNi and exhibited better isotropic mechanical properties. The present work provides a novel strategy to utilize CET for resisting crack propagation in the process DED-fabricated MPEAs and improvement in mechanical properties of MPEAs. [ABSTRACT FROM AUTHOR]

Shear fatigue damage to the waterproof cohesive layer has not received enough attention in bridge deck pavement design. Meanwhile, there is less theoretical basis for the design of a waterproof cohesive layer. In this study, direct shear and shear fatigue tests were used to compare the shear strength and fatigue performance of waterproof adhesive materials under different disposal schemes for a cement slab surface, bonding materials, and spreading schemes, and the recommended optimal dosage of waterproof adhesive material for the bridge deck is given. Based on the shear fatigue tests results of indoor waterproof adhesive materials, an equation for prediction fatigue at 15 °C was established and temperature correction was applied. Based on these results, we propose a waterproof cohesive layer design method for bridge deck pavement with interlayer shear damage as the design index. The life expectancy of the shear damage between the decks was calculated for a real bridge deck. These results provide scientific guidance for design of a waterproof cohesive layer in a bridge deck, which can effectively extend the service life of a bridge deck. [ABSTRACT FROM AUTHOR]

Taking the influence of alloying elements into consideration, a hardness prediction model based on a newly proposed parameter named actual carbon diffusion time (ACDT), which was calculated by combining temperature history with carbon diffusivity, is developed in this paper. The hardness distribution was directly derived from a 3D thermal model, which was constructed to simulate the laser surface hardening of AISI 1045, and from which the temperature history was also obtained. Using this 3D thermal model, the geometric characteristics after laser hardening (e.g., the width of the hardened layer, the depth of the phase change layer) were determined according to the martensitic transformation. The influences of the scanning speed and the laser power on the geometric characteristics were investigated, and the relations among the geometric characteristics after laser hardening were further determined. The laser hardening experiments with various parameters were conducted, and it was found that the hardness can be accurately predicted using the developed hardness prediction model (R-squared, 97.0%). The proposed parameter ACDT, as the core of the hardness prediction model in this paper, broadens the way for hardness prediction in laser hardening with the alloying effect involved.