Search

Graphitic carbon nitride (g-C 3 N 4 ) has aroused intense expectations owing to its outstanding visible-light-response capability for hydrogen generation from water. However, the low-yield, low practical surface area and high photogenerated charge recombination rate severely limits its photocatalytic performance . Here, in this study high-yield synthesis of g-C 3 N 4 with a large surface area has been achieved successfully through an in situ pyrolysis of cyanamide with the assist of the bifunctional urea. During the synthesis process, urea may decompose into a lot of ammonia and carbon dioxide, which acts as the supplementary-nitrogen-source and bubble-generating template respectively. It is found that the surface area and photocatalytic activity can be controlled by adjusting the addition of the environmentally friendly bifunctional urea. The as-prepared g-C 3 N 4 exhibits unique optical activity as well as photoelectriochemical activity for solar-to-chemical conversion, and this simple bifunctional method may open a new pathway for designing and optimizing of photocatalysts. [ABSTRACT FROM AUTHOR]

Metallic nickel nanoparticles well dispersed in graphitized carbon matrix (Ni@C) by pyrolysis of metal-organic frameworks and leaching treatment of hydrochloric acid could greatly enhance the photocatalytic activity of g-C 3 N 4 under visible light irradiation. For 2.0 wt% Ni@C/g-C 3 N 4 , the average hydrogen evolution rate is 2.15 mmol h −1 g −1 , which is around 88 times higher than that of pure g-C 3 N 4 , and even better than that of platinum-loaded g-C 3 N 4 . The remarkably improved photocatalytic activities through loading Ni@C can be attributed to the cooperative work of Ni nanoparticles and graphene layers, which facilitate the separation of photo-generated carriers and suppress the recombination of the electron-hole pairs. In addition, the hollow onion-like structure can restrain the formation of Ni-hydrogen bonds which modulates desorption of hydrogen. Our studies may open up a promising strategy to design economical noble-metal-free co-catalysts for efficient solar energy conversion. [ABSTRACT FROM AUTHOR]

The mechanism study of redox mediator to transfer the photogenerated electrons is extremely desirable for artificial Z-scheme photocatalytic systems. Here we find that the α-Fe 2 O 3 exposed by {012} and {104} facets can facilitate the reduction of IO 3 − , which results in increasing the activity of photocatalytic water oxidation significantly. By employing NaIO 3 as an electron acceptor, the O 2 evolution activity (309.4 μmol h −1 g −1 ) of α-Fe 2 O 3 photocatalyst mainly exposed by {012} and {104} facets is 84 times higher than that (3.68 μmol h −1 g −1 ) of α-Fe 2 O 3 mostly exposed by {101} and {111} planes. We anticipate that the findings in this work may open the door for further development of enhanced Z-scheme photocatalytic systems. [ABSTRACT FROM AUTHOR]

[Display omitted] • Operando NMR combined with gas-probe method was used to study active sites transfer under the metal-support interaction. • The photocatalytic conversion efficiency of pure TiO 2 decreased, while that of Pt/TiO 2 was unaffected in gas conditions. • After loading metal-Pt, active sites changed from TiO 2 surface to Pt/TiO 2 interface. Recently metal-support interaction (MSI) has attracted considerable attention in photocatalysis. Some studies emphasize the importance of active sites on photocatalysts; however, there are no reports on site changes under MSI in real reactive conditions. Herein, an operando nuclear magnetic resonance technique was proposed to study such site changes on anatase TiO 2 and Pt/TiO 2 , through a gas-probe method, in CH 3 OH reforming. The photocatalytic oxidation efficiency of CH 3 OH by pure TiO 2 decreased immensely under extra-gas conditions, while that by Pt/TiO 2 was unaffected. The surface of pure TiO 2 were occupied by injected gas molecules, making CH 3 OH inaccessible to active sites. However, in Pt/TiO 2 , CH 3 OH adsorption sites changed from TiO 2 surface to metal-Pt/TiO 2 interface as confirmed by H 2 gas-probe experiments. This study provides a deeper understanding of active sites transfer by MSI and leverages the gas-probe method for its detection to guide the development of technology to test active-site positions in heterogeneous catalysts. [ABSTRACT FROM AUTHOR]

Operando NMR has been exploited to probe the effects of photon flux and wavelength on photocatalytic reforming of methanol. • Operando NMR technique can be used to study the CH 3 OH photochemistry process. • CH 3 OH oxidation reaction could be enhanced by photon flux. • Photo energy had different effects on CH 3 OH photoreactions for TiO 2 and Pd/TiO 2. • SPR of the metal cocatalyst can be observed at 380 nm for the Pd/TiO 2 sample. • Operando NMR may help know the photoreactions in practical working conditions. Photocatalytic decomposition of water for hydrogen generation is a promising way to obtain clean energy sources, and photon flux together with photon energy play particularly important roles in photocatalytic reactions. However, a study of their effects under real conditions is still limited, thus leaving a gap in our understanding. Herein, an operando NMR technique was proposed to systematically study the effects of photon flux and photon energy on TiO 2 and Pd/TiO 2 -based photocatalytic methanol reforming reactions by changing the irradiation wavelength from 350 to 400 nm. Experimental results showed that the productivity of the methanol oxidation reaction can be obviously influenced by photon flux for the pure TiO 2 and Pd/TiO 2 sample, but longer wavelengths (lower photon energy) can slow down the reaction. Meanwhile, on the Pd/TiO 2 catalyst a significantly enhanced activity in CH 3 OH oxidation was found at the irradiation with the wavelength of 380 nm, which activity in CH 3 OH oxidation is even higher than that observed under the irradiation with the wavelength of 365 nm. This enhanced oxidation activity can be attributed to the surface plasmon resonance of the cocatalyst. [ABSTRACT FROM AUTHOR]

Operando NMR combined with the DFT calculations has been exploited to probe the crucial role of the bulk H 2 O in the CH 3 OH heterogeneous photochemistry processes on the surface of rutile-TiO 2. • Bulk H 2 O can significantly affect the CH 3 OH reforming products. • The participation ways of bulk H 2 O can vary from H 2 O molecule to H-atom. • The productivities of CH 3 OH reforming products vary with H 2 O concentration. • Operando NMR can be used to probe the kinetics of the CH 3 OH photocatalysis. Solid-liquid heterogeneous catalysis reactions play key roles in industrial catalytic reactions, throughout pollution control, fuel cell, methanol reforming and so on. But, few operando techniques have been performed to track the complex reaction processes, especially those in bulk liquid environment containing two or more liquid reactants, thus leaving a gap in our understanding of the reaction mechanisms deep into the working conditions. Here, we demonstrate an approach, using operando nuclear magnetic resonance (NMR) to probe the dynamics and kinetics of the methanol heterogeneous photochemistry processes in liquid condition with and without bulk water (H 2 O). It shows that not only can bulk H 2 O affect the types of methanol reforming products, but also its participation way can vary from H 2 O molecule to H-atom. Furthermore, the productivities of the main products - methylene glycol (HOCH 2 OH) and hemiacetal (CH 3 OCH 2 OH) – show different dependency on the H 2 O concentration, which is further supported by the density functional theory calculations (DFT). The operando NMR method opens up exciting opportunities for the mechanism studies of heterogeneous catalysis reaction in bulk liquid. [ABSTRACT FROM AUTHOR]

The search of efficient and stable photocatalysts for the evolution of hydrogen from water using solar energy is of great importance for material science today. Limited by the relatively inferior stability of oxynitrides, the availability of these visible-light-response materials in photocatalysis is still far below what is expected. Here we report a novel oxynitride Ce 0.3 Zr 0.7 O 1.88 N 0.12 as an efficient and stable H 2 -evolving photocatalyst under visible light irradiation, which can further enable overall water splitting by coupling with an O 2 -evolving photocatalyst via Z-scheme. Experimental and theoretical results together reveal that the origin of the excellent activity and stability of Ce 0.3 Zr 0.7 O 1.88 N 0.12 photocatalyst can be attributed to the improved separation rate of photoexcited charge carriers by surface and sub-surface oxygen vacancies. The present study provides a strategy to engineer efficient and stable photocatalysts, and the oxynitride mentioned above could act as a promising candidate of H 2 -evolving photocatalyst for designing a prominent Z-scheme photocatalytic system. [ABSTRACT FROM AUTHOR]

Cadmiun sulfide (CdS) is considered as a promising semiconductor photocatalyst for its outstanding light absorbance and photoinduced charge separation, but it suffers from severe photocorrosion, mainly due to the sluggish kinetics of holes transfer. In this work, we introduce the strong local Coulomb attraction, which is demonstrated via the in situ K-edge X-ray absorption near edge (XANES) analysis, to accelerate the migration of holes for long-term photocatalytic activity. As a proof-of-concept sample, the hole-attraction Fe 2 O 3 /CdS nanorods evidence an outstanding stability of at least 6 days without obvious deactivation, and feature with an excellent H 2 evolution rate of 20.7 mmol g −1 h −1 . Moreover, this Coulomb attraction strategy can be leveraged to enhance the photocatalytic performance of Zn 0.5 Cd 0.5 S, indicating the wide application of the strategy. [ABSTRACT FROM AUTHOR]

The development of low-Pt catalysts is important for the large-scale application of Pt-based catalysts. Catalytic reactions mainly occur on the surface or interface of a material, and thus the surface properties of the catalyst will strongly affect their catalytic activity; this phenomenon has attracted widespread attention. Here, a series of Pt NPs with different chemical states and particle sizes were obtained by changing the light source wavelength, light time, and other conditions of light deposition synthesis. The Pt-TiO 2 catalyst has excellent potential in both photocatalytic hydrogen evolution (4.5 mmol·g−1·h−1) and electrocatalytic hydrogen evolution (26 mV@10 mA cm−2). We also found that the photocatalytic activity is more sensitive to the chemical state of Pt and that reducing the catalyst size can improve the electrocatalytic activity. This work not only provides a green and effective method to adjust the chemical state of precious metals on metal oxides but also helps to understand the impact of surface states on the catalytic process. A series of Pt NPs with different chemical states and sizes were embedded in TiO 2 (B) via a modified photochemical reduction method. The optimized Pt-TiO 2 (B) bifunctional catalyst exhibited excellent p-HER and e-HER catalytic activity. [Display omitted] • A series of Pt NPs with different chemical states and particle sizes were obtained by a photochemical strategy. • The optimized Pt-TiO 2 catalyst has excellent potential in both p-HER (4.5 mmol g−1 h−1) and e-HER (26 mV@10 mA cm−2). • The p-HER is more sensitive to the chemical state of Pt, and reducing the catalyst size improves the e-HER. • This work provides a new idea to promote catalytic activity by adjusting the catalyst's state and size. [ABSTRACT FROM AUTHOR]

Brassinosteroids play diverse roles in plant growth and development. Plants deficient in brassinosteroid (BR) biosynthesis or defective in signal transduction show many abnormal developmental phenotypes, indicating the importance of both BR biosynthesis and the signaling pathway in regulating these biological processes. Recently, using genetics, proteomics, genomics, cell biology, and many other approaches, more components involved in the BR signaling pathway were identified. Furthermore, the physiological, cellular, and molecular mechanisms by which BRs regulate various aspects of plant development, are being discovered. These include root development, anther and pollen development and formation, stem elongation, vasculature differentiation, and cellulose biosynthesis, suggesting that the biological functions of BRs are far beyond promoting cell elongation. This review will focus on the up-to-date progresses about regulatory mechanisms of the BR signaling pathway and the physiological and molecular mechanisms whereby BRs regulate plant growth and development. [ABSTRACT FROM PUBLISHER]

• The carboxyl group with electron-withdrawing effect was grafted on the surface of graphite carbon nitride. • The electron-withdrawing effect can promote the separation and migration of carriers to improve photocatalytic performance. • The performance achieved 52 times enhancement with an apparent quantum yield of 15.7 % at 420 nm. Graphitic carbon nitride (g-C 3 N 4) has recently emerged as a promising candidate for photocatalytic hydrogen evolution, but only showed limited activity owing to its sluggish photogenerated carriers separation and migration. Herein, the carboxyl-functionalized g-C 3 N 4 (O CN) was synthesized by a grafting post-treatment method to alleviate the negative influences from this intrinsic drawback. As a result, the surface carboxyl groups greatly improve charge carrier dynamics to suppress carriers recombination via the driving force originated from its electron-withdrawing effects. The resultant O CN exhibits 52 times higher hydrogen evolution rate than the pristine, and possesses a high apparent quantum yield (AQY) of 15.7 % at 420 ± 15 nm. This work deepens the understanding of the surface group related modifications for photocatalytic materials, further providing a promising approach for rational design of photocatalysts with highly efficient solar energy conversion. [ABSTRACT FROM AUTHOR]

The development of novel, noble metal-free semiconductor catalysts with high efficiency is of great importance for the degradation of organic compounds. Among them, amorphous materials have been extensively studied for their unique and commercially useful properties. Here, a completely amorphous, noble metal-free photocatalyst C3N4ZnxOy (x, y = 0.32–1.10) was successfully synthesized from urea and ZnO by a simple high-temperature polymerization method. As the Zn content increased, the short-range ordered structures of the amorphous samples were still retained, as revealed by XPS, FTIR, and ssNMR. Meanwhile, the -CN3 structures were observed to be gradually destroyed, which may make the amorphous state more favorable for photocatalytic reactions. Compared with g-C3N4, the amorphous samples showed significantly reduced intensities in the photoluminescence spectra, indicating that the recombination rate of the photo-generated charge carriers was greatly reduced. It was confirmed that the optimized sample (C3N4Zn0.61O0.61) achieved a photocatalytic efficiency of 86.1% in the degradation of tetracycline hydrochloride under visible light irradiation within 1 h. This is about 2 times higher than that of both g-C3N4 and ZnO. This study emphasizes the importance of the amorphous structure in photocatalytic reactions, and this synthetic strategy may provide an effective model for designing other novel catalysts. [ABSTRACT FROM AUTHOR]