Search

Background: Since the outbreak of COVID-19, how to reduce the risk of spreading viruses and other microorganisms while performing aerosolgenerating procedures (AGPs) has become a challenging question within the dental and dental hygiene communities. The purpose of this position paper is to summarize the evidence of the effectiveness of various mitigation methods used to reduce the risk of infection transmission during AGPs in dentistry., Methods: The authors searched 6 databases-MEDLINE, EMBASE, Scopus, Web of Science, Cochrane Library, and Google Scholar-for relevant scientific evidence published between January 2012 and December 2022 to answer 6 research questions about the risk of transmission, methods, devices, and personal protective equipment (PPE) used to reduce contact with microbial pathogens and limit the spread of aerosols., Results: A total of 78 studies fulfilled the eligibility criteria. The literature on the risk of infection transmission including SARS-CoV-2 between dental hygienists and their patients is limited. Although several mouthrinses are effective in reducing bacterial contaminations in aerosols, their effectiveness against SARS-CoV-2 is also limited. The combined use of eyewear, masks, and face shields is effective in preventing contamination of the facial and nasal region while performing AGPs. High-volume evacuation with or without an intraoral suction, low-volume evacuation, saliva ejector, and rubber dam (when appropriate) have shown effectiveness in reducing aerosol transmission beyond the generation site. Finally, the appropriate combination of ventilation and filtration in dental operatories is effective in limiting the spread of aerosols., Discussion and Conclusion: Aerosols produced during clinical procedures can pose a risk of infection transmission between dental hygienists and their patients. The implementation of practices supported by available evidence will ensure greater patient and provider safety in oral health settings. More studies in oral health clinical environments would shape future practices and protocols, ultimately to ensure the delivery of safe clinical care., Competing Interests: The authors have no conflicts of interest to declare., (Copyright © 2024 American Dental Hygienists' Association and the Canadian Dental Hygienists Association.)

Background Since the outbreak of COVID-19, how to reduce the risk of spreading viruses and other microorganisms while performing aerosol generating procedures (AGPs) has become a challenging question within the dental and dental hygiene communities. The purpose of this position paper is to summarize the existing evidence about the effectiveness of various mitigation methods used to reduce the risk of infection transmission during AGPs in dentistry. Methods The authors searched six databases, MEDLINE, EMBASE, Scopus, Web of Science, Cochrane Library, and Google Scholar, for relevant scientific evidence published in the last ten years (January 2012 to December 2022) to answer six research questions about the the aspects of risk of transmission, methods, devices, and personal protective equipment (PPE) used to reduce contact with microbial pathogens and limit the spread of aerosols. Results A total of 78 studies fulfilled the eligibility criteria. There was limited literature to indicate the risk of infection transmission of SARS-CoV-2 between dental hygienists and their patients. A number of mouthrinses are effective in reducing bacterial contaminations in aerosols; however, their effectiveness against SARS-CoV-2 was limited. The combined use of eyewear, masks, and face shields are effective for the prevention of contamination of the facial and nasal region, while performing AGPs. High volume evacuation with or without an intraoral suction, low volume evacuation, saliva ejector, and rubber dam (when appropriate) have shown effectiveness in reducing aerosol transmission beyond the generation site. Finally, the appropriate combination of ventilation and filtration in dental operatories are effective in limiting the spread of aerosols. Conclusion Aerosols produced during clinical procedures can potentially pose a risk of infection transmission between dental hygienists and their patients. The implementation of practices supported by available evidence are best practices to ensure patient and provider safety in oral health settings. More studies in dental clinical environment would shape future practices and protocols, ultimately to ensure safe clinical care delivery., (Copyright © 2024 The American Dental Hygienists’ Association.)

Thermal papers (e.g. point of sale receipts, adhesive labels, tickets) significantly contribute to contamination of paper material cycles and the environment with substances of (eco-) toxicological concern. In particular, they contain color developers like endocrine disrupting bisphenols in typical concentrations of about 1-2 percent per weight (wt%). Bisphenol A (BPA) was used as the common color developer over the last decades, but it will be restricted for thermal paper application in the European Union to a limit of 0.02 wt% from 2020 onwards. Consequently, a variety of BPA substituents such as bisphenol S (BPS) and its derivatives gain importance in thermal paper application. In this study, a rapid, reliable and cost-effective method for identification and quantification of BPA, alternative color developers and related substances like sensitizers is presented based on HPLC separation coupled with diode array detection (DAD) and Corona charged aerosol detection (CAD). Quantification was performed with regard to the intended use of the substances in thermal papers. Besides traditional UV external calibration using reference standards, alternative quantification approaches, in particular UV chromophore concentration for BPS derivatives and CAD universal response technique for low-volatile color developers, were applied and compared in order to allow quantification without reference substances. A market analysis for intended used color developers and sensitizers was performed on thermal paper samples (n = 211) collected in Germany during 2018 and 2019. Pergafast 201 (in 41.7% of the samples) was the most common color developer with concentrations above 0.02 wt%, followed by BPA (36.0%), BPS (13.3%) and other BPS derivatives known as D8, D-90, BPS-MAE and TGSA, that are mainly present in adhesive labels. Sensitizers were determined in over 90% of the samples., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Exposure to trace metals in airborne particulate matter (PM) has been linked to various adverse health effects. Quantifying metals in PM is important; however, current analytical tools tend to be bulky and expensive. A need therefore exists for more rapid, low-cost, portable tools for multiplexed determination of metals in PM. Electrochemical paper-based devices (ePADs) have been used for detecting metals in PM but require different devices and methods for different metals, making the systems more complicated than desired. Recently reported Janus ePADs offer a solution to this problem by allowing for multiple electrochemical experiments from a single sample. Here, we sought to determine if a Janus ePAD containing four independent channels and working electrodes could be used for simultaneous detection of multiple metals in PM. Online sample pretreatment in each channel during sample delivery yielded optimal conditions for each experiment. The design allows the device to conduct square-wave anodic stripping voltammetry (SWASV) and square-wave cathodic stripping voltammetry (SWCSV) for simultaneous detection of Cd, Pb, Cu, Fe, and Ni from a single sample. Two detection zones each with shared reference and counter electrodes were used for SWASV and SWCSV, respectively. The proposed sensors reached LODs down to 0.5, 0.5, 1.0, 0.5, and 1.0 μg L -1 , for Cd(II), Pb(II), Cu(II), Fe(II), and Ni(II), respectively. The linear working ranges were 0.5-400.0 μg L -1 for Cd(II), Pb(II), and Fe(II), 1.0-400.0 μg L -1 for Cu(II), and 0.5-200.0 μg L -1 for Ni(II). The devices were applied for Cd(II), Pb(II), Cu(II), Fe(II), and Ni(II) determination in PM samples, and the results agreed with those using traditional ICP-MS analyses at 95% confidence.

Airborne particulate matter (PM) pollution significantly impacts human health, but the cellular mechanisms of PM-induced toxicity remain poorly understood. A leading hypothesis on the effects of inhaled PM involves the generation of cellular oxidative stress. To investigate PM-induced oxidative stress, analytical methods have been developed to study the chemical oxidation of dithiothreitol (DTT) in the presence of PM. Although DTT readily reacts with several forms of reactive oxygen species, this molecule is not endogenously produced in biological systems. Glutathione (GSH), on the other hand, is an endogenous antioxidant that is produced throughout the body and is directly involved in combating oxidative stress in the lungs and other tissues. We report here a new method for measuring aerosol oxidative activity that uses silver nanoparticle (AgNP) aggregation coupled to glutathione (GSH) oxidation in a paper-based analytical device. In this assay, the residual reduced GSH from the oxidation of reduced GSH to its disulfide induces the aggregation of AgNPs on a paper-based analytical device, which produces a reddish-brown product. Two methods for aerosol oxidative reactivity are presented: one based on change in color intensity using a traditional paper-based techniques and one based on the length of the color product formed using a distance-based device. These methods were validated against traditional spectroscopic assays for DTT and GSH that employ Elman's reagent. No significant difference was found between the levels measured by all three GSH methods (our two paper-based devices and the traditional method) at the 95% confidence level. PM reactivity towards GSH was less than towards DTT most likely due to the difference in the oxidation potential between the two molecules.

With an established role in cystic fibrosis and bronchiectasis, nebulized antibiotics are increasingly being used to treat respiratory infections in critically ill invasively mechanically ventilated adult patients. Although there is limited evidence describing their efficacy and safety, in an era when there is a need for new strategies to enhance antibiotic effectiveness because of a shortage of new agents and increases in antibiotic resistance, the potential of nebulization of antibiotics to optimize therapy is considered of high interest, particularly in patients infected with multidrug-resistant pathogens. This Position Paper of the European Society of Clinical Microbiology and Infectious Diseases provides recommendations based on the Grading of Recommendations Assessment, Development and Evaluation (GRADE) methodology regarding the use of nebulized antibiotics in invasively mechanically ventilated adults, based on a systematic review and meta-analysis of the existing literature (last search July 2016). Overall, the panel recommends avoiding the use of nebulized antibiotics in clinical practice, due to a weak level of evidence of their efficacy and the high potential for underestimated risks of adverse events (particularly, respiratory complications). Higher-quality evidence is urgently needed to inform clinical practice. Priorities of future research are detailed in the second part of the Position Paper as guidance for researchers in this field. In particular, the panel identified an urgent need for randomized clinical trials of nebulized antibiotic therapy as part of a substitution approach to treatment of pneumonia due to multidrug-resistant pathogens., (Copyright © 2017 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.)

Human exposure to particulate matter (PM) air pollution has been linked with respiratory, cardiovascular, and neurodegenerative diseases, in addition to various cancers. Consistent among all of these associations is the hypothesis that PM induces inflammation and oxidative stress in the affected tissue. Consequently, a variety of assays have been developed to quantify the oxidative activity of PM as a means to characterize its ability to induced oxidative stress. The vast majority of these assays rely on high-volume, fixed-location sampling methods due to limitations in assay sensitivity and detection limit. As a result, our understanding of how personal exposure contributes to the intake of oxidative air pollution is limited. To further this understanding, we present a microfluidic paper-based analytical device (μPAD) for measuring PM oxidative activity on filters collected by personal sampling. The μPAD is inexpensive to fabricate and provides fast and sensitive analysis of aerosol oxidative activity. The oxidative activity measurement is based on the dithiothreitol assay (DTT assay), uses colorimetric detection, and can be completed in the field within 30 min following sample collection. The μPAD assay was validated against the traditional DTT assay using 13 extracted aerosol samples including urban aerosols, biomass burning PM, cigarette smoke, and incense smoke. The results showed no significant differences in DTT consumption rate measured by the two methods. To demonstrate the utility of the approach, personal samples were collected to estimate human exposures to PM from indoor air, outdoor air on a clean day, and outdoor air on a wildfire-impacted day in Fort Collins, CO. Filter samples collected on the wildfire day gave the highest oxidative activity on a mass normalized basis, whereas typical ambient background air showed the lowest oxidative activity.

This review of the evidence of the health effects of air pollutants focuses on research conducted in Ontario. Seven key Ontario studies are cited. These findings are highly significant for people living in the Great Lakes basin (and particularly the Windsor-Quebec corridor), where high levels of certain air pollutants (eg, ground-level ozone and ultra-fine particles) occur more frequently than in other parts of Canada. The issue is a serious one, requiring an integrated and comprehensive approach by many stakeholders, including the active involvement of organized medicine. It is important that the health effects of these air pollutants are understood. Governments must act to reduce emission levels through statue and regulation bolstered by noncompliance penalties. The findings of research have included the following: in a Toronto study, a 2% to 4% excess of respiratory deaths were attributable to pollutant levels; children living in rural Ontario communities with the highest levels of airborne acids were significantly more likely to report at least one episode of bronchitis, as well as to show decreases in lung function; and have been linked to increases in pollutants, emergency room visits and hospitalizations in Ontario. Every Ontarian is affected by air pollutants, although he or she may be unaware of the asymptomatic effects such as lung and bronchial inflammation. This health problem is preventable; while physicians know of the adverse health impacts of air pollution and they are concerned, individually they now focus on the treatment of symptoms. The major recommendations of the report are as follows: Enactment of more stringent sulphur and nitrogen oxide emission limits, including a provincewide sulphur dioxide reduction of 75% from current cap levels, and the maximum allowable nitrogen oxides emission limits of 6000 tonnes annually from Ontario Hydro. New transportation sector emission limits that should include California-level standards for light and heavy duty vehicles, reductions from off-road engines, an expanded vehicle inspection and maintenance program, and tougher standards for sulphur-in-fuel content. Petitioning the United States Environmental Protection Agency administrator under Section 115 of the United States Clear Air Act to require reductions in the American emission of sulphur dioxide and nitrogen oxides, which damage the health of Canadian residents and their environment. Physician advice to patients about the risks of smog exposure, physician support for more health effects research on air pollution, and physician promotion of the development of air pollution-related health education materials. The recommendations discussed in this paper will, if acted upon, lead to a significant reduction in the overall burden of illness from air pollutants, especially in children and the elderly. These recommendations have been selected from a review of recommendations made by various authorities, and are those that the OMA feels a particular responsibility to support.

Abstract: High content of oil aerosols exist in the ambient air. In this study, the kapok fiber was studied for removing oil aerosols due to its oleophilic property and large lumen. The influence of the kapok fiber on filtration performance of air filter papers against the di-(2-ethyl hexyl) sebacate (DEHS) oil aerosols was analyzed. Firstly, different contents of kapok fibers were blended with hardwood fibers to make filter papers by the wet-laid process. Then the effects of the kapok fiber content on the morphology, thickness, air permeability, strength tensile and DEHS penetration of filter papers were studied. Finally, the DEHS loading performance of filter papers with different content of kapok fibers was evaluated. The results showed that as the content of the kapok fibers increased, the thickness and air permeability increased. The most penetrating particle size was 200 nm of all the papers and the filtration efficiency decreased as the content of kapok fibers increased. During the loading process, the pressure drop increased slowly in the first stage due to the deposition of the oil aerosols on the surface of the filter papers leading to the rise of the friction area. Then the pressure drop increased faster due to the rearrangement of oil aerosols in the filter papers. Finally, it increased exponentially since the oil aerosols formed bridges and films between the fibers and clogged the papers. It was found that as the content of kapok fibers increased, the loading time of the first and second stages became longer, which meant that the kapok fibers could improve the oil aerosols holding capacity. This study demonstrated the potential of using kapok fibers in air filter for removing oil aerosols.Graphical abstract: [ABSTRACT FROM AUTHOR]

Bioaerosols generated during toilet flushing can contribute to the spread of airborne pathogens and cross-contamination in indoor environments. This presents an increased risk of fomite-mediated or aerosol disease transmission. This study systematically investigated the factors contributing to increased bioaerosol exposure following toilet flushing and developed an empirical model for predicting the exposure-relevant bioaerosol concentration. Air in a toilet cubicle was sampled by impaction after seeding with Clostridium difficile spores. Design of Experiments (DoE) main effects screening and full factorial design approaches were then employed to investigate the significant factors that heighten the risk of exposure to bioaerosols post-flush. Our findings reveal that the inoculated bacterial concentration (C), time elapsed after flushing (t), lateral distance (d), and mechanical ventilation (v) are significant predictors of bioaerosol concentration, with p-values < 0.05. The interaction term, C × d showed a marked increase in bioaerosol concentration up to 232 CFU/m 3 at the closest proximity and highest pathogen load. The interplay of C and t (C × t) demonstrated a time-dependent attenuation of bioaerosol viability, with concentrations peaking at 241 CFU/m 3 immediately post-flush and notably diminishing over time. The lateral distance and time post-flush (d × t) interaction also revealed a gradual decrease in bioaerosol concentration, highlighting the effectiveness of spatial and temporal dilution in mitigating bioaerosol exposure risks. Furthermore, there is an immediate rise in relative humidity levels post-flush, impacting the air quality in the toilet environment. This study not only advances our understanding of exposure pathways in determining bioaerosol exposure, but also offers pivotal insights for designing targeted interventions to reduce bioaerosol exposure. Recommendations include designing public toilets with antimicrobial surfaces, optimizing ventilation, and initiating timely disinfection protocols to prioritise surfaces closest to the toilet bowl during peak exposure periods, thereby promoting healthier indoor environments and safeguarding public health in high-traffic toilet settings., (© 2024. The Author(s).)

Background: In recent years, hand drying has been highlighted as a key step in appropriate hand hygiene, as moisture on hands can increase the transfer of micro-organisms from hands to surfaces and vice versa., Aim: To understand bacterial and viral aerosolization following hand drying, and study the transfer of micro-organisms from hands to surfaces after drying using different methods., Methods: Groups of five volunteers had their hands pre-washed with soap, rinsed and dried, then inoculated with a concentrated mixture of Pseudomonas fluorescens and MS2 bacteriophage. Volunteers entered an empty washroom, one at a time, and rinsed their hands with water or washed their hands with soap prior to drying with a jet dryer or paper towels. Each volunteer applied one hand successively to various surfaces, while their other hand was sampled using the glove juice method. Both residual bacteria and viruses were quantified from the washroom air, surface swabs and hand samples., Findings: P. fluorescens and MS2 bacteriophages were rarely aerosolized while drying hands for any of the drying methods studied. Results also showed limited, and similar, transfer of both micro-organisms studied on to surfaces for all drying methods., Conclusion: The use of jet dryers or paper towels produces low levels of aerosolization when drying hands in a washroom. Similarly, all drying methods result in low transfer to surfaces. While the coronavirus disease 2019 pandemic raised concerns regarding public washrooms, this study shows that all methods tested are hygienic solutions for dry washed hands., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The exponentially decaying acoustic pressure of scattered surface acoustic waves (SAWs) at the contact line of a liquid film pinned to filter paper is shown to sustain a high curvature conic tip with micron-sized modulations whose dimension grows exponentially from the tip. The large negative capillary pressure in the film, necessary for offsetting the large positive acoustic pressure at the contact line, also creates significant negative hydrodynamic pressure and robust wicking action through the paper. An asymptotic analysis of this intricate pressure matching between the quasistatic conic film and bulk drop shows that the necessary SAW power to pump liquid from the filter paper and aerosolize, expressed in terms of the acoustic pressure scaled by the drop capillary pressure, grows exponentially with respect to twice the acoustic decay constant multiplied by the drop length, with a universal preexponential coefficient. Global rapid aerosolization occurs at a SAW power twice as high, beyond which the wicking rate saturates.

Experiments were conducted to illustrate some of the challenges associated with measuring dynamic MDI aerosols. Experimental HFA-134a solution MDIs containing 8 or 20% ethanol were measured using the Andersen cascade impactor using three different inlets. It was demonstrated that the size distribution of MDI aerosols changes substantially during the measurement process. The measured size distribution was shown to be dependent on the degree of evaporation that has occurred prior to size measurement. Additionally, the degree of evaporation prior to measurement also influences the number of modes present in the measured size distribution. While MDI aerosols appeared to have a separate large particle mode when measured using the U.S. Pharmacopeial induction port ("USP inlet"; [U.S. Pharmacopeia, 1996. Physical tests and determinations <601> aerosols, metered dose inhalers, and dry powders. Pharmacopeial Forum 22, pp. 3065-3095]), the aerosols were shown to be monomodal when measured using a large volume inlet. The apparent large particle mode observed with the USP inlet seem rather to be droplets from the same monomodal distribution that have not fully evaporated. The complex interaction of the MDI plume and inlet configuration was described. Inlet design was shown to influence inlet deposition, measured particle size, and even deposition in the actuator mouthpiece. Inlet deposition was shown to be highly size-dependent with large droplets being collected more efficiently than smaller droplets.

The hemp root bast paper is innovatively prepared to research the oil filtration properties and air filtration properties for practical application. It can be found that beating degree and weight both have great influence on air permeability, pore diameter distribution, oil/air penetration and oil/air filtration efficiency of hemp paper. The oil filtration efficiency of hemp papers for 0.33 µm particles is 99.7%–99.975% and air filtration efficiency for 0.26 µm NaCl aerosol particles is 99.942%–100%. Through comparison of oil filtration properties and air filtration properties with commonly used automobile engine oil/air cotton paper filtration materials, it can be found that hemp paper has the smaller thickness, weight, mean pore diameter, porosity and oil/air penetration, while the better oil/air filtration efficiency and higher pressure drop. Due to the higher filtration efficiency of hemp papers and green, biodegradable, sustainable resources of hemp plants in the case of environmental requirements, the pilot trial hemp paper automobile engine oil filter is successfully manufactured. The results indicate that hemp papers have better oil/air filtration properties than cotton paper in practical application. We hope that such an attempt will be helpful for practical application of hemp paper and meet the needs of domestic market for filtration materials. Furthermore, it can enlarge the application field and increase the added value of hemp. [ABSTRACT FROM PUBLISHER]

Direct measurement of the acidity (pH) of ambient aerosol particles/droplets has long been a challenge for atmospheric scientists. A novel and facile method was introduced recently by Craig et al. (2018), where the pH of size-resolved aerosol droplets was directly measured by two types of pH-indicator papers (pH ranges: 0–2.5 and 2.5–4.5) combined with RGB-based colorimetric analyses using a model of G-B (G minus B) vs. pH2. Given the wide pH range of ambient aerosols, we optimize the RGB-based colorimetric analysis on pH papers with a wider detection range (pH ∼ 0 to 6). Here, we propose a new model to establish the linear relationship between RGB values and pH: pHpredict = a⋅Rnormal+b⋅Gnormal+c⋅Bnormal. This model shows a wider applicability and higher accuracy than those in previous studies and is thus recommended in future RGB-based colorimetric analyses on pH papers. Moreover, we identify one type of pH paper (Hydrion® Brilliant pH dip stiks, lot no. 3110, Sigma-Aldrich) that is more applicable for ambient aerosols in terms of its wide pH detection range (0 to 6) and strong anti-interference capacity. Custom-made impactors are used to collect lab-generated aerosols on this type of pH paper. Preliminary tests show that, with a collected particle size range of ∼ 0.4–2.2 µm , the pH paper method can be used to predict aerosol pH with an overall uncertainty ≤ 0.5 units. Based on laboratory tests, a relatively short sampling time (∼ 1 to 4 h) is speculated for pH prediction of ambient aerosols. More importantly, our design of the impactors minimizes potential influences of changed environmental conditions during pH paper photographing processes on the predicted aerosol pH. We further show that the routinely adopted way of using pH color charts to predict aerosol pH may be biased by the mismatch between the standard colors on the color charts and the real colors of investigated samples. Thus, instead of using the producer-provided color charts, we suggest an in situ calibration of pH papers with standard pH buffers. [ABSTRACT FROM AUTHOR]

Direct measurement of the acidity (pH) of ambient aerosol particles/droplets has long been a challenge for atmospheric scientists. A novel and facile method was introduced recently by Craig et al. (2018), where the pH of size-resolved aerosol droplets was directly measured by two types of pH-indicator papers (pH ranges: 0–2.5 and 2.5–4.5) combined with RGB-based colorimetric analyses using a model of G − B (G minus B) versus pH². Given the wide pH range of ambient aerosols, we optimize the RGB-based colorimetric analysis on pH papers with a wider detection range (pH ~ 0 to 6). Here, we propose a new model to establish the linear relationship between RGB values and pH: pHpredict = a × Rnormal + b × Gnormal + c × Bnormal. This model shows a wider applicability and higher accuracy than those in previous studies, and is thus recommended in future RGB-based colorimetric analyses on pH papers. Moreover, we identify one type of pH paper (Hydrion® Brilliant pH dip stiks, Lot Nr. 3110, Sigma-Aldrich) that is more applicable for ambient aerosols in terms of its wide pH detection range (0 to 6) and strong anti-interference capacity. The determined minimum sample mass (~ 180 μg) highlights its potential to predict aerosol pH with a high time resolution (e.g., ≤ 1 hour). We further show that the routinely adopted way of using pH color charts to predict aerosol pH may be biased by the mismatch between the standard colors on the color charts and the real colors of investigated samples. Thus, instead of using the producer-provided color chart, we suggest an in-situ calibration of pH papers with standard pH buffers. [ABSTRACT FROM AUTHOR]

Background: Paper patching, a method that places cigarette paper over the most mobile quadrants of the tympanic membrane, is one of the treatment options for patulous eustachian tube (PET). Aims/Objectives: The objective of this study was to compare the outcomes of two different treatment strategies for PET. Material and methods: Twenty-three patients underwent paper patching of the tympanic membrane and 16 patients were treated with nasal saline irrigation with or without ipratropium bromide nasal spray. Medical records were reviewed for resolution of PET symptoms as categorical variables (complete remission, partial remission, or no improvement) with a minimum follow-up of 3 months. Results: Immediately after undergoing paper patching, 20 of the 23 patients (87.0%) reported complete remission (CR). The percentage of CR after paper patching was 82.6% at 1 month and 65.2% at 3 months. A greater percentage of patients reported CR of aural symptoms in the paper patching group than in the nasal irrigation group at both 1 and 3 months after treatment (p < .05). Conclusions and significance: Repetitive paper patching resolves aural discomfort in most PET patients for at least 3 months and can be considered as a first-line treatment option for PET in the outpatient setting. [ABSTRACT FROM AUTHOR]

We report a simple paper filter-based cross flow filtration method for air purification. We have examined a monolith filter array with a cross flow ratio of 1.0 and parallel and staggered filter arrays with a cross flow ratio of about 0.7 in terms of pressure drop and collection efficiency. The monolith filter array shows a monotonic increase in pressure drop from approximately 0.9 to 2.1 kPa. The parallel and staggered filter arrays reduce the increase in pressure drop, which can be maintained as low as 0.8 kPa over the entire range of dust loadings examined. The monolith filter array shows the highest collection efficiency, which is more than 95% over the entire range of dust loadings examined. The collection efficiency of the parallel and staggered filter arrays is initially as high as 70% and decreases to 30% when the dust loading increases to 40 and 100 g m−2, respectively. In particular, collected particles are more uniformly distributed on the staggered filter array than on the parallel filter array, resulting in the initial collection efficiency of 70% being sustained for a longer time. This uniform distribution in the staggered filter array may prevent a rapid increase in local pressure drop. This study provides insight into the development of filtration systems using simple paper filters without increasing the pressure drop and decreasing the collection efficiency. Copyright © 2022 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]

• A novel preparation method of kapok filter paper with an excellent sheet formation. • A novel energy-efficient kapok filter paper with high DHC for solid-oil mixed aerosol. • Hollow lumen and oleophilic characteristic facilitate the filtration of oily aerosol. • Loading behavior evolution over oil content is subject to deposition behavior. • A particle deposition mechanism is proposed to explain loading behavior evolution. Although typical high efficiency filter media for gas turbine exhibit short lifespan under harsh conditions with excessive oily aerosol, rare literatures are available concerning fundamental reason or introducing filter media for addressing aforementioned conditions. Herein, we developed a novel kapok filter paper with high energy-efficiency and dust holding capacity (DHC) against solid-oil mixed aerosol. Loading behavior of filter media was characterized in terms of both macroscopic loading behavior (pressure drop and DHC evolution over oil content) and micro-scale particle deposition behavior. Owing to hollow lumen and waxy surface of kapok fiber, the novel filter paper was fluffy and oleophilic, which made it outperform typical commercial filter media (F01 and F02) in energy saving and DHC. Under harshest conditions where F01 and F02 manifested low DHC of 8.0 g/m2, 13.3 g/m2 and 29.1 g/m2, 34.7 g/m2 at the oil content of 50%, 75%, respectively, the kapok filter paper owned notably excellent DHC of 160.5 g/m2, 240.8 g/m2, respectively. Moreover, it was revealed that loading behavior evolution (resulted from the increase of oil content) was subject to deposition behavior. Once oil content was above 25%, pressure drop profiles transitioned from that of solid particles loading to that of liquid particles loading. Depositions structure varied from well-defined particles to particles-in-oil with films covered. Due to formation of a porous structure, a critical maximum DHC occurred for mixed aerosol with 25% oil content. Finally, a particle deposition mechanism was proposed, for the first time, to explain the loading behavior evolution over oil content. [ABSTRACT FROM AUTHOR]

Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL − 1 with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with conventional liquid measurements, and by analyzing IAEA-153 reference material (Trace Elements in Milk Powder); a good agreement with the certified value for phosphorus was obtained. [ABSTRACT FROM AUTHOR]

For more than a hundred years, people have been trying to solve the mystery of the Tunguska meteorite (TM) and understand what kind of phenomenon it was. The importance of this riddle is not so much in explaining a specific phenomenon as in realizing a class of large-scale events that mankind may face. During this time, a large number of hypotheses have been proposed, but none can satisfactorily explain the information collected about TM. [ABSTRACT FROM AUTHOR]

This White Paper presents the Consensus Statements derived from a Special Issues Board (SIB) held in Chicago, IL, in October 2010. The SIB was convened to address the question of whether there is a need for both aerosol and aqueous intranasal steroids (INSs) in the treatment of allergic rhinitis (AR). The faculty reviewed the published record of efficacy and safety of aerosol and aqueous INSs, as well as patient and physician satisfaction and preferences for currently available INSs, and burden of disease. Agreement on unmet needs also included the practice experience of the faculty and their colleagues. The body of evidence indicates that INSs are equally effective and well tolerated for most patients. However, differences exist among current aqueous formulations as well as between these products and their aerosol antecedents, based on the properties of the nasal spray. Aerosol formulations, although no longer available, may be preferred for some patients with specific pathophysiology and may be preferred by some patients based on sensory perception. There are good reasons to expand the currently available options of INSs by having both aerosol and aqueous formulations. [ABSTRACT FROM AUTHOR]

Conventional airborne virus measurement usually requires appreciable sampling and detection times. Viral aerosols should also be collected or prepared in a liquid medium whose volume typically ranges from milliliters to tens of milliliters; hence, many sampling and detection steps need to be taken with the unit horizontal or immobile. Moreover, viral aerosols need to be sufficiently enriched, which makes real-time monitoring difficult. Herein, we present a near real-time enrichment and quantification system of airborne viruses that consists of a wet-paper-based electrochemical immunosensor with a gel electrolyte and a modified electrostatic particle concentrator. A small amount of phosphate-buffered saline flowed on the electrode, which resulted in sensor electrodes that are barely wet (covered in a thin buffer film measuring several micrometers) to ensure antigen–antibody interaction and the removal of non-target particles on the electrode surface. This system ensures that airborne viruses are highly enriched on the working electrode of the immunosensor, and it is possible to measure the MS2 virus particle concentrations every 10 min for 60 min stably and selectively against non-target airborne viruses and bacteria at horizontal and tilted measurement configurations. This system thus has the potential to be used in the real-time mobile monitoring of airborne microorganisms. [Display omitted] • Wet-paper-based electrochemical immunosensor under an electrostatic field is used to sample and quantify airborne viruses. • The sensors are barely wet to ensure antigen-antibody interaction and the removal of non-targets. • The enrichment ratio for airborne viruses is very high (> 108). • Airborne viruses are sampled and stably measured every 10 min for 60 min. • Airborne viruses are measured selectively against non-targets even when the unit is tilted. [ABSTRACT FROM AUTHOR]

This technical note documents the use of paper as electrospray emitters. The porous structure of the paper automatically delivers the liquid by capillary effects without the need of a mechanical pump. The liquid flow rate can be approximately quantified using Washburn equation. Despite the limited durability, paper-based electrospray emitters exhibit unique features such as ease of multiplexing, self-regulated liquid supply without need of pumps, ultra-low cost, and versatility provided through origami. [ABSTRACT FROM AUTHOR]

We report for the first time the distribution and hazard potential of aerosol and metals resulting from joss paper burning. Burning joss paper and incense is a traditional custom in many Oriental countries. Large amounts of air pollutants, including particles, polycyclic aromatic hydrocarbons, toxic metals and other gaseous pollutants, are released into the environment during the burning stage. Many investigations have reported on the emission of pollutants from the incense burning. However, no work has been reported until now on the analysis of the released pollutants apart from polycyclic aromatic hydrocarbons. In this study, a micro-orifice uniform-deposit impactor and inductively coupled plasma optical emission spectrometry were, respectively, used to collect aerosols and characterize the toxic metals from joss paper burning. We studied two types of particulate matter (PM): PM that are particles with a diameter smaller than 2.5 μm and PM that are particles with a diameter smaller than 10 μm. PM are the most potentially toxic particles. Our results showed that PM are the major component of the pollutants and that the PM to PM ratio ranged from 62 to 99%. The metals Na, Ca, Mg, Al and K were the main species in the aerosol and in the bottom ash. [ABSTRACT FROM AUTHOR]

The functionalized soft materials are widely used in the field of flexible electronics devices, but there are still some challenges in preparing functionalized paper with sensitive reaction. In this paper, the functionalized paper with asymmetric wettability was developed by introducing nitrocellulose (NC) and multi-walled carbon nanotubes (MWCNTs) into the paper surface. This asymmetric wettability gives the paper sensitivity to relative humidity. When functionalized paper is placed in humid environment, CNTs can be folded and unfolded correspondingly in normal and reverse bending, which leads to the change of resistance on the paper surface. Therefore, the functionalized paper shows the induction to humidity factor through such bending deformation and resistance change. Interestingly, this paper can be further applied to flexible sensors for monitoring the relative humidity and breathing steam of various soils. In addition, the modifier and matrix are non-toxic, harmless and environmentally friendly, the preparation method of the coating is simple, and the functional paper can be reused for many times, which makes it possible for the functional paper to be applied in practice. We proposed a strategy of constructing hydrophobic layer on hydrophilic printing paper with hydrophobic multi-walled carbon nanotubes and nitrocellulose by a simple coating method. The functional paper can respond to the curvature and resistance of water mist due to the water transportation imitating Mimosa pudica. [Display omitted] • The prepared functional paper has asymmetry of hydrophobicity/hydrophilicity. • The prepared functional paper still has excellent resistance to water after repeated many times. • The paper can make resistance response to water in various states (continuous liquid water, wet airflow and wet air). • The experiment is nontoxic, harmless, environmentally friendly and simple. [ABSTRACT FROM AUTHOR]