Search

Background: Health care systems contribute significantly to greenhouse gas emissions. One source of these emissions is single-use products. Examination table paper does not confer protection against microbial contamination and thus can be omitted while following infection control standards. The objective is to eliminate the routine use of examination table paper in outpatient oncology clinics at BC Cancer. Methods: A quality improvement approach was used. Examination tables continued to be disinfected using wipes between patients, but table paper was not used. Plan-do-studyact cycles were performed at four regional cancer centres. Results: Pre-intervention, the cancer centres used 19 to 69 rolls of paper monthly. Postintervention, usage declined to 0 to 2 rolls monthly. This was associated with annual cost savings of $3974 and a reduction of 32 501 kg of carbon dioxide emissions. Conclusions: The use of examination table paper can be eliminated in outpatient clinics, resulting in both cost savings and a reduction in carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

• A technology-rich system model is created by integrating operations at MRFs and recycling paper mills. • Our model assesses sustainable pathways for U.S. domestic paper recycling industry. • Domestic recycling rate can increase by 15 % with better collection rate and sorting efficiency. • Use of recycled fibers can reduce energy and carbon intensities for most paper products. Dramatic changes in global recovered paper markets, triggered in large part by Chinese import restrictions, challenge the U.S. to find sustainable pathways for increasing the domestic paper recycling rate. This study presents a technology-rich process model of the U.S. domestic paper recycling industry to assess the energy consumption, carbon emissions, and system costs. A scenario analysis shows the viability of three potential pathways for achieving the national goals of a 15 % increase in both the paper recycling rate and the recycled paper utilization rate. The results suggest that the national goals can be achieved by recovering 80 % of recyclable papers from households and commercial stores, while trading all exported bales to domestic recovery with additional investments in processing capacity expansion. The deployment of advanced technology can enable material recovery facilities (MRFs) and paper mills to produce most recycled paper products that are more energy efficient with fewer CO 2 emissions. [ABSTRACT FROM AUTHOR]

In recent years, an increasing focus has been placed on the mitigation of carbon dioxide emissions, underscoring the significance of the sustainable energy-conservation industry as a prominent and consequential field of development. As an energy-intensive procedure within the papermaking sector, the process of pulp-fiber beating necessitates an imperative exploration of alternative approaches aimed at mitigating energy consumption. This study has synthesized renewable cationic cellulose nanoparticles (CCNPs) extracted from the parenchymal cells of maize stalk pith. The objective is to demonstrate their viability as a reinforcing additive for paper sheets, thereby reducing the reliance on conventional beating processes. The results showed that CCNPs were prone to augment the physical strength of bleached papers, compared with unbleached papers. The inclusion of 9% CCNPs led to a remarkable 163.5% and 140.0% increase in tear and tensile indexes for bleached Eucalyptus paper, respectively. Incorporating CCNPs into non-refined paper yields physical traits akin to wood pulp paper beaten over 40 °SR. The CCNP-strengthened handsheets exhibited superior tensile and tear index in comparison to commercial dry strength additives such as cationic starch (CS) and cationic polyacrylamide (CPAM). Additionally, at 80 μg/ml concentration, E-B-9 displayed significant bactericidal effectiveness, achieving an impressive 97% reduction in Escherichia coli. This notable outcome is attributed to the presence of quaternary ammonium salt moieties in the formulation. This investigation introduces a promising approach where in the utilization of CCNP as an innovative multifunctional agent for paper holds the potential to enhance paper performance and concurrently reduce production costs. [Display omitted] ● The agro-waste CCNP acted well as a paper multifunctional addictive. ● The CCNPs promoted physical strengths of the paper from non-refined wood pulps. ● 9% CCNP-added sheet has mechanical properties akin to that from the 40°SR paper. ● 80 μg/ml of the bleached hardwood showed 97% bactericidal efficacy against E. coli. ● The improvement of CCNPs applied to bleached pulps is superior to unbleached pulps. [ABSTRACT FROM AUTHOR]

This study evaluates the potential use of discarded plasterboard paper as fibers from buildings to reinforce concrete. Various concentrations of wastepaper fibers (0.5%, 1%, 1.5%, 2%, and 2.5% by weight of the binder) were investigated in this research. To mitigate the water absorption effect of the paper fibers, metakaolin was employed as a partial cement replacement. The results demonstrate that the inclusion of the wastepaper fiber enhances the mechanical and durability performance of the concrete. The optimal fiber proportion was identified as 1%, leading to a 29% increase in the compressive strength, a 38% increase in the splitting tensile strength, a 12% decrease in the water absorption, and a 23% decrease in the drying shrinkage with respect to the concrete containing 20% metakaolin. However, exceeding this optimal fiber content results in decreased mechanical and durability properties due to the fiber agglomeration and non-uniform fiber distribution within the concrete matrix. Based on the microstructural analysis, the improved performance of the concrete is ascribed to decreased porosity, more refined pore structure, and reduced propagation of microcracks within the concrete matrix in the presence of wastepaper fiber. According to the results, concrete containing 20% metakaolin and 1% wastepaper fiber exhibits durability and mechanical properties comparable to those of the traditional concrete. This finding highlights the significant promise of reducing dependency on conventional cement and incorporating suitable recycled materials, such as discarded plasterboard, and secondary by-products like metakaolin. Such a strategy encourages the preservation of resources, reduction in carbon dioxide emissions, and a decrease in the ecological footprint resulting from concrete production. [ABSTRACT FROM AUTHOR]

Highlights • Mechanical properties of waste papers are closely correlated with devolatilization. • Start of devolatilization caused a sudden decrease in relative storage modulus ( E ′ r). • Kinetics of storage modulus change is investigated referring to activation energy. • E ′ r can be predicted with mass loss ratio and CO 2 emission. Abstract This article details a correlation study on early devolatilization behaviors (drying & volatile emission at 25–240 °C) and the change in mechanical properties (expressed by viscoelasticity) of four types of waste papers. The early stage of devolatilization was investigated using the TG-FTIR and mechanical properties using the dynamic mechanical analysis (DMA) method. The results show that the elastic and viscous mechanical properties showed obvious correlations with free and bound water evaporation and volatile emission. The storage modulus (E ′) and loss modulus (E ″) of the papers decreased as temperature increased and at the two important temperatures, namely 100 °C, the start of bound water evaporation, and 150 °C, the start of devolatilization in TG & DTG curves, E ′ showed extrema. Especially the relative storage modulus ( E ′ r) exhibited a sudden decrease at around 150 °C, where the activation energy of thermochemical conversion jumps from low values to high values, indicating the start of devolatilization. CO 2 is the major compound of the volatiles and it is well correlated with E ′ r in exponential function model and can be used as an index for predicting the E ′ r of the waste papers in their early devolatilization stage; while during the drying stage, mass loss ratio can be used to predict E ′ r of the waste papers. [ABSTRACT FROM AUTHOR]

Paper has shaped society for centuries and is considered one of humanity's most important inventions. However, pulp and paper products can be damaging to social and natural systems along their lifecycle of material extraction, processing, transportation, and waste handling. The pulp and paper industry is among the top five most energy-intensive industries globally and is the fourth largest industrial energy user. This industry accounts for approximately 6% of global industrial energy use and 2% of direct industrial CO 2 emissions. The pulp and paper industry is also the largest user of original or virgin wood, with deleterious impacts on both human health and local flora and fauna, including aquatic ecosystems. This critical and systematic review seeks to identify alternatives for mitigating the climate impacts of pulp and paper processes and products, thus making the pulp and paper industry more environmentally sustainable. This study reviews 466 studies to answer the following questions: what are the main determinants of energy and carbon emissions emerging from the pulp and paper industry? What are the benefits of this industry adopting low-carbon manufacturing processes, and what barriers will need to be tackled to enable such adoption? Using a sociotechnical lens, we answer these questions, identify barriers for the pulp and paper industry's decarbonization, and present promising avenues for future research. •This review identifies carbon-intensive processes in the pulp and paper industry. •Presents decarbonizing practices, potential transformations and innovations. •Presents promising avenues for future research. •No agreed consensus on the most promising technologies to achieve net-zero in the pulp and paper industry. •Pulp and paper products are associated with other sociotechnical systems that create compelling interdependencies among industries. [ABSTRACT FROM AUTHOR]

Huge amounts of waste paper are discarded every year, of which only a minute fraction is recycled and the rest is dumped in landfills. Paper fibres can only be recycled a limited number of times before they become too short or weak to make high-quality recycled paper. This eventually adds to the amount of waste paper being generated and not recycled. It would thus be advantageous to use this waste as a low-cost sustainable construction material and make it a value-added product. In this study, Portland pozzolana cement (fly ash based), waste newsprint paper and water were used to prepare paper concrete cubes. Initially, investigations were performed to determine the optimum soaking time required for softening the paper fibres of the newsprint paper. The study mainly addressed the strength and weight loss of the paper concrete cubes with age. The results indicate that, at 28 d, the paper concrete lost 25-50% of its initial weight and a maximum cubic compressive strength of 5·40 MPa was obtained. [ABSTRACT FROM AUTHOR]

Fungi continue to be the main cause of biodeterioration in libraries. In addition to degrading paper, fungi are an important health issue for librarians and even library users. The aim of this study was to investigate the application of supercritical carbon dioxide (SCCO 2 ) to ancient paper contaminated with fungi. For this purpose, SCCO 2 was applied in two processes to treat samples of paper pieces: addition of 4% and 8% ethanol (w/w) at a pressure of 150 bar and temperature of 40 °C for 1 hour. Control samples (no processing) and processed samples were directly plated onto culture media to evaluate the frequency of fungal growth. Morphological and molecular analysis of the 294 samples showing mold growth on paper revealed that Aspergillus niger , Aspergillus flavus , and Eurotium amstelodami were the most frequently isolated fungi. In the control group, 47.6% of the samples were contaminated with fungi. This percentage was only 1.9% after treatment with both processes. The difference between unprocessed control samples and samples treated under the two conditions was statistically significant ( P < 0.1) for a confidence interval of 90%. [ABSTRACT FROM AUTHOR]

The pulp and paper industry accounts for approximately 5% of total industrial energy consumption and contributes 2% of direct carbon dioxide (CO 2 ) emissions from industries. World paper and paperboard demand and production are increasing significantly, leading to an increase in this sector's energy use and CO 2 emissions. Although current studies identify a wide range of energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is limited or scattered regarding new energy-efficiency technologies that are not yet fully commercialized. Development of emerging or advanced energy-efficiency technologies and their deployment in the market will be crucial for this industry's mid- and long-term energy saving and climate change mitigation strategies. This paper compiles available information on energy savings, environmental and other benefits, costs, and commercialization status for 25 emerging technologies to reduce the energy use and CO 2 emissions. The purpose is to provide a well-structured comprehensive review on these emerging energy-efficiency technologies for engineers, researchers, investors, policy makers, pulp and/or paper companies, and other interested parties. [ABSTRACT FROM AUTHOR]

Abstract: The pulp and paper industry is placed in a unique position as biomass used as feedstock is now in increasingly high demand from the energy sector. Increased demand for biomass increases pressure on the availability of this resource, which might strengthen the need for recycling of paper. In this study, we calculate the energy use and carbon dioxide emissions for paper production from three pulp types. Increased recycling enables an increase in biomass availability and reduces life-cycle energy use and carbon dioxide emissions. Recovered paper as feedstock leads to lowest energy use (22GJ/t) and CO2 emissions (−1100kgCO2/t) when biomass not used for paper production is assumed to be converted into bio-energy. Large differences exist between paper grades in e.g. electricity and heat use during production, fibre furnish, filler content and recyclability. We found large variation in energy use over the life-cycle of different grades. However, in all paper grades, life-cycle energy use decreases with increased recycling rates and increased use of recovered fibres. The average life-cycle energy use of the paper mix produced in The Netherlands, where the recycling rate is approximately 75%, is about 14GJ/t. This equals CO2 savings of about 1tCO2/t paper if no recycled fibres would be used. [ABSTRACT FROM AUTHOR]

In this paper an approach for analysing the potential for implementation of different technology pathways for the European pulp and paper industry (PPI) is presented. The approach is based on detailed technical research and aggregates the knowledge from previous studies to incorporate the whole European PPI. Thus, the potential for different technology pathways can be estimated on a European level whilst still considering important characteristics of individual mills. The usefulness of the approach was exemplified by applying it to a case study of the potential for introduction of carbon capture and storage (CCS) within the European PPI. The results from the case study show that for the European PPI, CCS has an up-hill road in order to be a viable, large scale alternative for reduction of CO2 emissions. If CCS is to be introduced in large scale within the European PPI, large biomass-based point sources of CO2 emissions need to be included when planning for CCS infrastructure and also the infrastructure needs to be built out for clusters emitting <20 MtCO2/yr. [ABSTRACT FROM AUTHOR]

In the context of a rapidly evolving Clean Development Mechanism (CDM) market and increasing debate about the design of a future global climate regime, it is essential to understand which types of projects are undertaken along industrial value chains, and also the influence of company characteristics (e.g. size, raw material base, product type, ownership and location) on firms' CDM participation and choice of project type. The Indian pulp and paper industry was examined for its energy intensity and its diversity in terms of both mitigation opportunities and company characteristics. Large firms were found to be more likely than small firms to participate in CDM. Although CDM projects in large and small firms generate similar amounts of certified emission reductions (CERs), the type of technology implemented in those projects varies strongly with company size due to differing levels of capabilities and capital. Mill size and raw material base also affect participation and choice of project type. A structured approach is suggested for analysing how to engage different subsectors of an industry in mitigation efforts based on transnational sectoral approaches, domestic sectoral approaches, and programmatic CDM. Preliminary policy recommendations are offered for the Indian pulp and paper industry, as well as insights that are transferable to other countries. A one-size-fits-all sectoral approach is difficult to implement and a strategy for differentiated treatment based on company characteristics is required to reflect local development priorities. [ABSTRACT FROM AUTHOR]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

A simple framework to estimate the potential of solar industrial process heating (SIPH) and corresponding CO 2 emissions mitigation in paper industry in India is presented. Geographical locations with clusters of paper mills have been identified and the annual process heating requirement for paper production (based on raw material use) at each cluster has been estimated. The total process heating potential for the paper industry in India has been estimated at 25.2 PJ/annum. Using the estimated performance of a commercially available parabolic trough based SIPH system with collector area requirement of 1.11 million m 2 annual solar fraction in the range of 0.25–0.30 have been estimated. Annual energy delivery of SIPH systems estimated at 4.34 PJ per annum. Finally at 8 main locations with clusters of paper mills in India considered in this study, adoption of SIPH without storage is expected to mitigate 0.34 million tonnes of CO 2 emissions annually. [ABSTRACT FROM AUTHOR]

With companies increasingly expected to undertake potentially costly climate-response strategies, we explore the roles of management control systems (MCSs) in how companies simultaneously manage their decarbonization objectives and their financial commitments. Based on research at 19 European chemical, steel, and utility corporations, we extend the concept of "proactive/reactive" response strategies by proposing three additional decarbonization strategies: wholesale green transition, green segmentation, and engagement. Second, we highlight the recursive relationship between MCSs and these strategies. We also postulate a dynamic model of MCSs evolution in the decarbonization context, whereby engagement strategies form the foundation of green segmentation and vice versa. Third, drawing on an integrative model, we propose three antecedents to companies' response strategies relevant in this context, namely, their framing of decarbonization as an opportunity or a threat, the different perspectives on the availability of green technologies, and the different perspectives on the policy context. [ABSTRACT FROM AUTHOR]

Abstract: The Scandinavian mechanical pulp and paper industry has been facing great challenges during the past decades, mainly because of declining demand for newsprint, and higher prices on raw material and energy. One way of increasing profitability is to produce more value-added products besides the production of pulp and paper. In this study, integration potentials of three possible future biomass gasification-based energy mills with an existing thermo-mechanical pulp (TMP) mill, co-located with a sawmill, have been evaluated. The product gas was utilized for electricity production in a gas turbine, for production of methanol or for production of Fischer–Tropsch (FT) liquids. Integration of the energy mills showed good potential as the TMP mill constitutes a heat sink for which the excess heat from the energy mills can be utilized all year round. However, since there is little excess heat from the TMP mill at the required level to be utilized for biomass drying, for example, heat integration is typically one way. It has also been shown that integration of biomass gasification with a TMP mill results in larger CO2 emissions reduction than stand-alone operation. Still, compared to co-firing biomass in a coal power plant, the energy mills all have lower potentials for CO2 emissions reduction. [Copyright &y& Elsevier]

The pulp and paper industry, which provides cellulose pulp and paper, bio-based energy and chemicals, is one of the largest energy consumers, greenhouse gases (GHG) and pollutant emitters among manufacturing industries. Although the environmental impact of the pulp and paper industry has been extensively studied, life cycle assessment (LCA) results have not yet reached a consensus. By means of a systematic review and meta-analysis, this article contributes to the quantification and harmonization of the life cycle environmental impacts of pulp making and paper making systems. Based on the screening of 45 cases of paper making and 18 cases of pulp making, we found that 1 t of paper results in about 950 kg carbon dioxide (CO 2 ) equivalent (CO 2 -eq) GHG emissions on average. However, there are distinct differences between countries and pulp and paper categories. The dominant factor influencing GHG emissions is energy use. In paper making, the pulp making process is responsible for 62% of energy use, 45% of GHG emissions, 48% of acidification potential, and 49% of eutrophication potential. The kg CO 2 -eq emissions of three different types of pulp were as follows: Kraft, 508 kg CO 2 -eq/t; chemi-mechanical, 513 kg CO 2 -eq/t; and recycled pulp, 408 kg CO 2 -eq/t. Excluding emissions from electricity and steam production, the convergence of carbon emissions is observed within the same categories of pulp. Straw-based pulp caused far more environmental impact than any other type because of the intensive inputs in agricultural activities as well as in the pulp making process. This research highlighted the inconsistencies in functional units, system boundaries, and methodologies and carbon neutrality assumptions in different LCA studies of pulp and paper making. Future studies should focus on the environmental impact of straw-based pulp making, system boundary unification, and calculation of biogenic carbon emissions. [ABSTRACT FROM AUTHOR]

The increasing presence of e-books (electronic books) has become a major focus in countries around the world. In the United States, e-books represented 28% of the total book sales for 2012. In Japan, the conversion from paper books to e-books is expected to accelerate by the prevalent use of smartphones and tablet PCs. It is therefore important to quantitatively evaluate the environmental load of paper books and e-books for a sustainable society. In this study, paper books are compared to e-books read on different electronic devices (e-ink tablets, tablets, cell phones, smartphones, laptop computers, desktop computers and portable music players) through a case study on a 224-page book. The study is based on key primary data such as use time and reading speed for each device and aims to minimize assumptions made in other studies. GHG emissions for paper books are 1.24 kg-CO 2 e/book, and are reduced to 1.11 kg-CO 2 e/book when the effect of paper recycling is taken into consideration. The results for e-books under average use-time conditions range from 0.25 to 0.91 kg-CO 2 e/book with the e-ink tablet having the lowest emissions. When the average use time of each e-book device is applied, the paper book has a higher impact than all the e-books. However, sensitivity analysis shows that the impact of paper books can be lower than that of e-books for larger screen devices such as tablets, laptops and desktops when the reuse of books is considered or the e-book reading device is hardly used during its life cycle. [ABSTRACT FROM AUTHOR]

SUMMARY Previous studies by the authors have shown that energy savings in pulp and paper mills offer opportunities for increased electricity production on-site or wood fuel export. The energy export implies reductions in CO2 emissions off-site, where fossil fuel or fossil-fuel-based electricity is replaced. To assess this potential and the related profitability for a future situation, four energy market scenarios were used. For a typical Scandinavian mill, the potential for CO2-emission reductions was 15-140 kton year−1 depending on the scenario and the form of energy export. Extrapolated to all relevant mills in Sweden, the potential was 0.4-3.1 Mton year−1, which is in the order of percent of the Swedish CO2 emissions. Wood fuel export implies larger reduction in CO2 emissions in most scenarios. In contrast, electricity export showed better economy in most of the cases studied; with annual earnings of 5-6 M€, this is an economically robust option. In the market pulp mill investigated, the wood fuel export was in the form of lignin. Lignin could possibly be valued as oil, regarding both price and potential for CO2-emission reduction, making lignin separation an option with good profitability and large reductions of CO2 emissions. Copyright © 2011 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Abstract: This paper studies allocation of fuel costs and CO2-emissions to heat and power in a CHP plant producing heat to an integrated pulp and paper mill and electricity to the liberalized electricity markets (or to the mill by the market price). The CHP plant and the mill are considered to be two separate economical units and both the mill and the CHP plant perspectives are discussed. Fuel costs and CO2-emissions are allocated using the energy, exergy and market based methods. The CHP plant purchases black liquor and bark from the mill. It also purchases oil from the markets to cover the whole fuel demand of the plant. The results indicate that the marked based method can be recommended as a “neutral” cost allocation method, because with that, the energy producer is not collecting extra margins from selling steam. This means that heat pricing is cost based. The results also indicate that depending on the emission factor and efficiency of alternative energy production form, the marked based method or the exergy method allocate the lowest CO2-emissions to heat. Therefore, the use of market based method for allocating costs and CO2 emissions can be recommended in order to use one single approach in both. [Copyright &y& Elsevier]

An in-depth investigation into the effect of embedment in global value chain (GVC) on energy conservation and emissions reduction is of great significance for scientifically assessing the environmental impact of GVC participation, and promoting high-quality development in China. This paper incorporates GVC embedment, energy consumption and carbon emissions into the same analysis framework for the first time. Based on the WIOD database, this paper theoretically and empirically examines the impact and mechanism of global value chain embeddedness on carbon emission reduction from two dimensions: energy consumption intensity and energy consumption structure. The study found that GVC embedment significantly reduced the industry's carbon emission intensity; developing economies' embedment in GVC helped reduce their carbon emission intensity, while the effect was not obvious in developed economies. GVC embedment had a significant inhibitory effect on the carbon emissions in both upstream and downstream industries, but not conducive to carbon reduction of low-tech manufacturing. The mechanism test shows that the GVC embedment not only exhibits the dual effects of energy conservation and emissions reduction, but also has a significant impact on carbon emissions by reducing the energy consumption intensity and improving the energy consumption structure. [ABSTRACT FROM AUTHOR]

The paper by Kiss and Szalay ([12]) titled I Sensitivity of buildings' carbon footprint to electricity decarbonization: a life cycle-based multi-objective optimization approach i examines how changes in electricity mix impacts GHG emissions. The Intergovernmental Panel on Climate Change (IPCC) emphasizes the need to immediately tackle climate change by significantly reducing greenhouse gas (GHG) emissions and capping global warming at 1.5 °C above pre-industrial levels (IPCC, [8]). The study found that total GHG emissions from maize production were on average 429 ± 27 kg CO2-eq/ton grain, with the highest emissions occurring during the dry season. This SI further contributes to raising awareness to the topic of measuring GHG emissions, decarbonization measures as well as climate neutrality. [Extracted from the article]

Pulp mills are making increasing efforts to reduce fossil fuel use and carbon dioxide emissions. Lime kilns, which are typically fired with fuel oil or natural gas, use the most fossil fuel in modern pulp mills. A modern kraft pulp mill can be fossil fuel-free during normal operation if fossilbased lime kiln fuels are substituted with renewable alternatives. This study compared the production and use of various renewable fuels, namely, hydrogen, producer gas, torrefied biomass, lignin, and pulverized biomass, in lime kiln operations in a 1.5 Mt/a kraft pulp mill in South America to define the techno-economic optimum for the fossil fuelfree operation of the pulp mill. The attractiveness of each of the concepts was dependent on local conditions and especially the prices of fossil fuels and electricity. The results showed, however, that feasible options exist for the replacement of fossil fuels in lime kiln operations. [ABSTRACT FROM AUTHOR]

Globally, transport is responsible for 23% of energyrelated carbon dioxide emissions and 80% of these emissions are attributable to road transport. Significant transformations, including extensive electrification of the sector, are necessary to achieve climate change goals. To understand new energy vehicle (NEV) policy research, we explore the status, knowledge base and research frontiers of NEV policy research by studying 355 papers collected from the Web of Science™ (WoS) Core Collection database. We map NEV policy research trends and knowledge structure development using knowledge domain technology and bibliometric techniques. The knowledge base analysis shows that: (a) NEV policy formation and evaluation; (b) policy incentives and consumer adoption; and (c) consumer preferences towards NEV adoption are all essential knowledge foundations in NEV policy research and development (R&D). The efficiency of NEV policy, cost-effectiveness of alternative fuel vehicles (AFVs), consumer preferences for NEV adoption, hydrogen energy and fuel cell vehicles, climate policy and CO2 emissions are five main lines of research in NEV policy studies. With the highest number of publications from Tsinghua University, China is the most active country in NEV policy research. Energy Policy, Sustainability and Journal of Cleaner Production are the core journals and Energy and Fuels and Environmental Sciences are the core disciplines of NEV policy research. The findings of this analysis help policymakers and researchers to navigate the literature on NEV, provide a clear map of existing works, identify the gaps and recommend promising avenues for future studies. [ABSTRACT FROM AUTHOR]

In the last ten years, as international environmental protection consciousness has increased, the study and applications of green building, green construction materials and energy savings as well as reduction of carbon dioxide have become urgent issues for governments. In Taiwan, joss papers are burned in more than 11,731 registered shrines or temples in traditional Chinese deity or ancestor worship ceremonies during special holidays or occasions. Instead of placing this large amount of burned joss paper ash (BJPA) in landfills, this study proposes recycling BJPA by replacing some cement with calcined BJPA (CBJPA) in mortar specimens. After BJPA samples were calcined at a high kiln temperature, mortar samples were created using CBJPA to replace cement at seven different levels: 0%, 5%, 10%, 15%, 20%, 25% and 30%. Tests like setting time and compressive strength were performed for macro-analyses; scanning electron microscopy–energy dispersive spectroscopy, X-ray diffraction and thermal gravimetric analysis/differential thermal analysis were carried out for the microstructure and chemical composition analyses. The test results showed that the compressive strengths of specimens with different levels of CBJPA replacement were apparently less than those of the control group (0% CBJPA) at all curing times. The compressive strength and setting time both decreased as the fraction of CBJPA in the mortar increased. Furthermore, because the hydration product did not cement and the mortar specimen structure was loose, the expected strength improvement from the pozzolanic reaction provided by the CBJPA was not clearly observed. [ABSTRACT FROM PUBLISHER]

Purpose: This study aims to systematically review the current academic literature on the role of technologies in low-carbon supply chain management (SCM), identify and analyse critical themes and propose an integrated conceptual model. Design/methodology/approach: A systematic literature review of 48 papers published between 2010 and 2022 was conducted. A conceptual model was advanced. Findings: Based on the analysis and synthesis of the reviewed papers, this review provides an initial attempt to integrate technology adoption and low-carbon SCM by developing a diffusion of innovation model of technology-enabled low-carbon SCM within the technology–organisation–environment (TOE) framework, in which drivers, enablers and barriers to technology adoption practices are identified. The environmental, economic and social outcomes of adoption practices are also identified. Originality/value: This study provides a novel and comprehensive roadmap for future research on technology-enabled low-carbon SCM. Furthermore, policy, as well as managerial implications, is presented for policymakers and managers. [ABSTRACT FROM AUTHOR]

Facing the double constraints of the "double carbon" target and high-quality economic development, carbon trading policy is an important tool for realizing the emission reduction commitment; based on the perspective of microenterprises, the specific mechanism and spatial effect of carbon trading policy still need to be evaluated. Taking China's carbon emissions trading pilot as a quasi-natural experiment, this paper empirically investigates the impact of carbon trading policy on the carbon emission intensity of pilot enterprises and its mechanism of action, and its impact on the carbon emission intensity of neighboring enterprises, based on the multi-temporal double-difference model, moderating effect model, and spatial Durbin model with the A-sharelisted enterprises in the period of 2009-2019 as the samples. It is found that: 1) Carbon trading policy will reduce the carbon emission intensity of enterprises to different degrees, and there are significant differences under different ownership types, degrees of marketization and the level of digitization. 2) Under the influence of environmental uncertainty, ESG disclosure will weaken the effectiveness of carbon emission reduction in the pre-pilot stage of the policy; with the gradual improvement of the carbon trading policy and ESG disclosure mechanism, ESG ratings will positively regulate the inhibitory effect of the carbon trading policy on the carbon emission intensity of enterprises through multiple paths. 3) Carbon trading policy effectively reduces multiple negative spillovers through the demonstration effect and competition effect of neighboring enterprises, driving the carbon emission reduction behavior of non-pilot enterprise. The research in this paper enriches the research paradigm of carbon emission intensity influencing factors, provides reference suggestions for the government to improve its policies, and better contributes to the realization of the "dual-carbon" vision in China as soon as possible. [ABSTRACT FROM AUTHOR]

Energy security is a main challenge in today's economies [[1]]. Bielowicz in the paper entitled "Petrographic Characteristics of Coal Gasification and Combustion By-Products from High Volatile Bituminous Coal" showed the benefits of coal gasification in a fluidized bed reactor with CO SB 2 sb as a gasifying agent at the temperature 889-980 °C [[18]]. Among the clean coal technologies, the new, innovative thermochemical conversion of coal technologies such a (combustion, gasification, pyrolysis, and hydrogenation) and co-gasification with biomass/biowaste/sewage sludge will be discussed. In this special issue "The effectiveness of clean coal technologies in global carbon dioxide mitigation", seven research papers were published as examples of recent developments in widely understand area of clean thermochemical conversion of fossil fuels with maximization of CO SB 2 sb emission reduction. [Extracted from the article]

With the proposal of "Carbon Peak and Carbon Neutrality" goals, China is facing a more serious carbon emissions reduction situation, and how the booming digital economy effectively helps China's carbon emissions reduction is one of the most urgent things that should be solved. To study the impact of the digital economy on carbon emission intensity, this paper is based on the panel data of 30 provinces in China (excluding Tibet, Hong Kong, Macao, and Taiwan) from 2011 to 2021, and applies the double-fixed effect model and the threshold effect model to study the impact of the digital economy on carbon emission intensity and the mechanism of its action, as well as to analyze the mechanism of the digital economy's action on carbon emission intensity from the perspective of technological innovation. The results of the study show that: i) The digital economy can reduce the intensity of regional carbon emissions; ii) The carbon emission reduction effect of the digital economy is non-linear, and its carbon emission reduction effect gradually increases with the level of development of the digital economy; iii) In addition to the direct impact of the digital economy on carbon emission intensity, it also has an indirect impact on carbon emissions through technological innovation; iv) There is regional heterogeneity in the carbon emission reduction effect of the digital economy, and the carbon emission reduction effect is more significant in the central and western parts of the country and regions with a high level of human capital development. Based on the conclusions obtained, this paper suggests: i) The rational integration of the digital economy and regional development should be strengthened; ii) Strong provinces in the digital economy should be encouraged to help weaker provinces, to narrow the "digital divide" between provinces; iii) Differentiated development strategies should be formulated in accordance with local conditions, to give full play to the optimal effect of the digital economy in carbon emission reduction. [ABSTRACT FROM AUTHOR]

To explore whether digital finance can reduce agricultural carbon emissions, promote regional convergence, and foster inclusivity in rural revitalization and shared prosperity, this paper uses the provincial-level index of digital financial inclusion to analyze the impact of digital financial inclusion on the intensity of agricultural carbon emissions and the Degum Gini coefficient (D-Gini coefficient) of regional carbon emission intensity in 30 sample provinces from 2010 to 2020. It examines the mechanism of the impact of digital financial inclusion on both variables to understand the underlying factors better. The main conclusions are as follows: (1) Digital financial inclusion significantly reduces the intensity of agricultural carbon emissions and narrows the gap in carbon emission intensity between regions. (2) The unconditional quantile regression coefficients show that the negative coefficients of the digital financial inclusion index and the three-dimensional indices decrease with increasing quantiles. However, the significant effects vary significantly at different quantiles. (3) Technological progress and the government's ability to allocate financial resources play a significant mediating role, and the income gap between urban and rural areas can be further narrowed, as well as the carbon emission intensity gap between provinces. The empirical results are robust and proven by replacing the econometric analysis method, changing the core variables, and other methods. [ABSTRACT FROM AUTHOR]

Global climate change due to increasing CO2 emissions threatens the development and survival of many countries, especially those on the coast. Intentional government spending by sectors can lower CO2 emissions to help these countries in sustainable development. Meanwhile, governance has some importance in enabling governments to achieve their economic development goals. Does governance affect the public spending - CO2 emissions nexus in developing economies? The paper seeks answers by employing the system GMM Arellano-Bond estimators to assess the impact of public spending, governance/institutional quality, and their interaction on CO2 emissions for a sample of 109 developing economies between 2002 and 2021. The results seem counter-intuitive that public spending reduces and governance increases CO2 emissions, while their interaction lowers them. Furthermore, private investment and economic growth promote CO2 emissions, while trade openness decreases them. The findings in this paper provide some policy lessons for governments of developing economies to protect environment. [ABSTRACT FROM AUTHOR]

Why Hydrogen. Nowadays, the energy industry and research laboratories are heavily working on developing ideas and methods to reduce and/or eliminate the carbon dioxide emission to control the problem of global warming. The solution relies on finding alternative green energy resources to reduce the world's dependence on conventional fossil hydrocarbon energy. Green hydrogen gas from water stands on the top of the alternative resources since it does not produce carbon dioxide when burned and in return does not add to global warming. Since seawater is the largest resource on earth, this makes the hydrogen production from seawater the most economically attractive solution. It is very important to avoid using fresh water as a source of hydrogen energy due to the dependence of all living creatures, humans, animals, plants, etc., on such very limited resources. In this paper, the applications of the proposed novel solution of green hydrogen production directly from seawater relies on solving one of the major problems, electrode corrosion. Generating Hydrogen. The direct method to produce green hydrogen from seawater is the electrolysis technique. This technique requires a direct current power supply for the positive and the negative electrodes. The outcome of the electrolysis is decomposing the saltwater to its positively charged hydrogen and sodium ions at the negative electrode and its negatively charged oxygen and chlorine ions at the positive electrode. The Real Challenge. Traditionally in the electrolysis analysis of water, both electrodes are made of metals. At the positive electrode, both the oxygen and the chlorine cause a high rate of corrosion to that electrode. This results in the interruption of the electrolysis process, bad water condition due to the corrosion deposits, and cost burden due to the need to periodically replace the corroded electrodes and/or use high-cost corrosion-resistant alloys. The Novel Solution. A low-cost but powerful solution to the corrosion problem is introduced, tested, and experimentally proved. The novelty of the solution relies on replacing the classic special high-cost metallic positive electrode with a nonmetallic, no-cost, one. The nonmetallic electrode is made of surface rock portions that have high porosity and pore volume and high permeability and pore connectivity and is saturated with saline water. Surface rocks with the above properties exhibit very low resistivity and hence conduct electricity like metallic electrodes. The voltage and the current conducted by such electrode are controlled by the electrode geometry, connectivity, and physical properties. Results and Discussions. Multiple experiments using the proposed nonmetallic high-porosity and high-permeability positive electrode are conducted and presented in this paper. The experimental work is based on testing multiple rock electrodes with different rock properties, sizes, and connectivity in comparison to the metallic ones. The comparison showed that the novel solution solved the corrosion challenges of the metallic electrodes with excellent efficiency. [ABSTRACT FROM AUTHOR]

This paper presents the comprehensive state-of-the-art on the challenges that short sea shipping currently faces across the world. The concept and its relationship with coastal shipping are introduced, followed by a review of the EU policies for short sea shipping and its practical impacts in modal split. A survey of the literature on the strong and weak points of this form of transportation is carried out, aimed at explaining the difficulties in achieving relevant modal shifts from road to sea. The experience with short sea shipping across the world is described and discussed, providing a global perspective. The paper then discusses the main challenges and opportunities in this field, namely decarbonisation, autonomous navigation, and digitalization. Conclusions are drawn on the possible impact of these game changing developments in this segment of the shipping industry. [ABSTRACT FROM AUTHOR]

An effective and just industrial transition is necessary both to mitigate climate change and protect jobs, and as a precursor to enable other sectors to decarbonise. Activity is at an early stage and examples of successful sector-wide interventions to decarbonise industry do not yet exist. Governments of industrialised countries are beginning to develop policy and provide funding to support deployment of carbon capture and low-carbon hydrogen infrastructures into high-emitting industrial clusters, but options for sites outside of clusters, denoted here as 'dispersed sites', are also required. This paper takes a mixed methods approach to provide the first analysis of the issues facing dispersed industrial sites on their route to decarbonisation and to suggest solutions to the challenges they face. Using the UK as a case study, it first characterises dispersed sites in terms of location, emissions released, sectors involved, and size of companies affected. It then shows how these features mean that simply expanding the geographical scope of the present UK decarbonisation strategy, which focuses on the provision of carbon capture and low-carbon hydrogen, would face a number of challenges and so will need to be broadened to include a wider range of abatement options and other considerations to meet the needs of dispersed sites. While the solutions for each place will be different, these are likely to include some combination of the expansion of shared infrastructure, the development of local zero-carbon hubs, research into a wider range of novel abatement technologies and facilitating local participation in energy planning. The paper concludes with a discussion of remaining knowledge gaps before outlining how its findings might apply to industrial decarbonisation strategies in other countries. [ABSTRACT FROM AUTHOR]

The heating of drinking water in households contributes for a significant amount to the emission of greenhouse gases. As a water utility aiming to operate climate neutral by 2020, Waternet needs to reduce its CO2 emission by 53 kton yr-1. To contribute to this ambition, a pilot project was carried out in Uilenstede, Amstelveen, the Netherlands, to recover the shower heat energy with a shower heat exchanger from Dutch Solar Systems. An experimental set up was built in the Waternet laboratory to compare field conditions and lab conditions. The energy recovery efficiency observed in the lab was 61-64% under winter conditions and 58-62% under summer conditions, while the energy recovery efficiency observed in Uilenstede was 57% in December 2014. Based on the observations, 4% of the total energy consumption of households in Amsterdam (electricity and gas) can be recovered with a shower heat exchanger installed in all households in Amsterdam, which also means a 54 kton yr-1 CO2 emission reduction. [ABSTRACT FROM AUTHOR]

Purpose: The objective of this paper is to explore potentially new area where social economy and social enterprises can become active while contributing to the field of green transition at the same time. Moreover, it shows the examples of innovative ideas and good practices introduced by social economy organisations, including social enterprises, and municipalities to promote way for the decarbonization of the social economy activities. Design/methodology/approach: The study draws on qualitative research and is based on the analysis of innovative good practices collected as part of the international project "Social Economy for a Just Green Transition (JustGreen)". Findings: The findings emphasise the potential of social economy to contribute to sustainability transitions and decarbonization efforts at the community level. Research limitations/implications: The research methodology focuses on analysing existing practices and literature rather than conducting primary data collection. While this approach provides valuable insights, it may lack contextual understanding that can be achieved through in-depth interviews, surveys, or case studies. Social implications: The research highlights the role of social economy in creating opportunities for marginalised groups and individuals. By focusing on decarbonization and sustainability, social economy can contribute to social empowerment by providing training, employment, and economic opportunities for disadvantaged communities. Originality/value: The originality and value of this paper lie in its exploration of the intersection between social economy and decarbonization efforts. While there is existing research on both topics individually, this paper contributes by examining the specific role of social economy in driving decarbonization and its associated social implications. [ABSTRACT FROM AUTHOR]

• Ultrasound-assisted drying (UAD) could intensify the moisture separation in pulp drying process. • The drying time was shortened by 26 %∼42 % as a result of UAD intensification. • Drying at 55 °C and 60 W led to the minimized energy consumption with UAD. • The Page model was found to be the best for predicting the pulp drying kinetics. • No significant differences in drying rates were observed when the moisture ratio was below 0.43. Traditional pulp convective drying (CD) is time-consuming and energy-intensive. This study aimed to assess the drying performance of pulp using ultrasound-assisted drying (UAD) and compared it with CD to intensify moisture separation. UAD was found to be fast and efficient with high effective moisture diffusivity of 2.77 × 10–10 ∼ 3.20 × 10–10 m2/s, low activation energy of 20.2 kJ/mol, and short drying time of 21.0 ∼ 16.5 min. It demonstrated that applying ultrasound could promote moisture separation with 26 %∼42 % reductions in drying time and 42 %∼22 % savings in energy consumption. The constant rate period was not presented and no significant differences in drying rates were observed when the moisture ratio was below 0.43 under the investigated conditions. The kinetics modeling results indicated that the Page model was the best to predict the pulp drying kinetics for both methods. It may lead to an alternative efficient approach for decarbonizing the drying process in pulp and paper production. [ABSTRACT FROM AUTHOR]

Deploying renewable generation to replace conventional fossil-fuel-based energy supplies provides an important pathway for the decarbonization of steelmaking plants. Meanwhile, it is also crucial to improve the flexibility of blast-furnace-gas-fired combined-cycle power plants (BFGCCs) to ease the accommodation of uncertain renewable generation. To this end, this paper proposes the deployment of a molten salt heat storage (MSHS) system in BFGCCs to store the heat of gas turbine flue gas so that the power–heat coupling of these BFGCCs can be unlocked to enhance the flexibility of the energy supply. A stochastic capacity optimization of an integrated BFGCC–MSHS–wind–solar (BMWS) energy system is presented to determine the optimal installed capacities of a BFG holder, MSHS, wind turbine, and PV panel, aiming to achieve an economic and safe energy supply for the entire system. Multiple scenarios considering uncertain fluctuations in load demands and renewable generation are generated with the Monte Carlo method based on a typical scenario. These scenarios are then reduced to representative scenarios using the synchronous substitution and reduction method for stochastic capacity optimization to enhance the reliability of the results. The case study results demonstrate that configuring MSHS reduces the total annualized cost of the BMWS system by 2.28%. Furthermore, considering the uncertainties of the power/heating load and wind/PV generation can reduce the expected annualized total cost of the BMWS system and the corresponding standard deviation by 5.66% and 81.45%, respectively. The BMWS system can achieve 730.68 tons of equivalent CO2 reduction in 24 h due to the successful utilization of renewable energy. This paper provides an effective approach for the decarbonization of energy generation systems in steelmaking plants. [ABSTRACT FROM AUTHOR]

In the context of rapid advancement in automation and increasing global warming, understanding the impact of artificial intelligence (AI) on carbon emissions (CES) is a cutting-edge research topic. However, there is limited focus in existing research on the nonlinear carbon reduction effect (CRE) of AI. This paper first theoretically elaborates the dual impact mechanisms of AI on CES and illuminates the nonlinear carbon reduction mechanisms of AI. Then, this study employs panel data encompassing 30 Chinese provinces between 1997 and 2019 to empirically test the net effect of AI on CES and the nonlinear carbon reduction effect of AI through econometric models. The results are as follows: first, although AI can both reduce and increase CES, AI primarily helps decrease CES. This conclusion holds true even after considering robustness, endogeneity, and spatial heterogeneity. Secondly, relative to the central and western regions, AI has significant achievement in reducing carbon intensity and per capita CES in the eastern region. However, there is still room for improvement in terms of reducing the total CES in the eastern region. Thirdly, improving the AI development level (AIDL) can magnify the marginal CRE of AI and lead to a nonlinear CRE of AI. Lastly, even if the AIDL remains constant, improving the level of marketization, human capital, digital infrastructure, economic development, openness, and government intervention can also amplify the marginal CRE of AI and lead to a nonlinear CRE of AI. To fully harness the potential of AI for green development, concerted efforts should be directed towards enhancing the innovation and application of AI technologies with carbon reduction potential. [ABSTRACT FROM AUTHOR]