Search

Flexible paper-based force sensors have garnered significant attention for their important potential applications in healthcare wearables, portable electronics, etc. However, most studies have only used paper as the flexible substrate for sensors, not fully exploiting the potential of paper's micro-nanostructure for sensing. This article proposes a novel approach where paper serves both as the sensitive element and the flexible substrate of force sensors. Under external mechanical forces, the micro-nanostructure of the conductive-treated paper will change, leading to significant changes in the related electrical output and thus enabling sensing. To demonstrate the feasibility and universality of this new method, the article takes paper-based capacitive pressure sensors and paper-based resistive strain sensors as examples, detailing their fabrication processes, constructing sensing principle models based on the micro-nanostructure of paper materials, and testing their main sensing performance. For the capacitive paper-based pressure sensor, it achieves a high sensitivity of 1.623 kPa−1, a fast response time of 240 ms, and a minimum pressure resolution of 4.1 Pa. As for the resistive paper-based strain sensor, it achieves a high sensitivity of 72 and a fast response time of 300 ms. The proposed new method offers advantages such as high sensitivity, simplicity in the fabrication process, environmental friendliness, and cost-effectiveness, providing new insights into the research of flexible force sensors. [ABSTRACT FROM AUTHOR]

Flexible sensors have recently attracted much attention for potential applications in motion measurement and wearable health monitoring. In this paper, an environment-friendly, economic, and high-performance paper-based self-inductive folding displacement sensor (PSIFS) was proposed, with displacement resolution of 20 μm and wide measurement range of 43.2 mm. The sensor sensitivity could reach 4.44% mm−1 with the maximum deviation of 0.00904 in experiments. The sensing mechanism based on inductance variation due to three-dimensional deformation of planar inductor coil and structural design principle under two dimensions of sensitivity and size were proposed and studied. The folding method to enhance sensitivity was proposed and 3 times sensitivity enhancement could be achieved by once folding. Multiple breathing states and motion states of the human joints could be recognized. The proposed simple paper-based sensor, folding method to increase sensitivity, and structural design model may provide a way for the research of flexible sensors. [ABSTRACT FROM AUTHOR]

Flexible sensing technology has shown great application value in motion monitoring and physiological signal detection. In many applications, the detected signal has the characteristics of low strength and wide range, thus improving the sensitivity and measurement range of sensors becomes extremely important. An enhancing method based on folding structure is proposed in this paper. Through the analysis of folding structure characteristics, the theoretical model of the folding structure effect in flexible sensors is established and the enhancement effect of sensitivity and measurement range is testified through three kinds of commonly used sensors, resistive, capacitive, and inductive sensors. Through changing the number of folding units, the sensitivity and measurement range of sensors can achieve to be adjusted. Folding sensors also have good hysteresis and repeatability properties and show the great performance in the application of human motion monitoring, such as limbs bending and rotating, muscle powering. The proposed method has the characteristics of simple, economical, environment friendly, and widely suitable, meanwhile avoiding the complexity of other ways to improve performance. This work has potential to enhance the sensitivity and measurement range for more kinds of flexible sensors and is of great value to fabricate high performance sensors based on folding structure. [ABSTRACT FROM AUTHOR]