Search

The Dismantling and Decommissioning (D&D) of nuclear facilities poses several challenges for radioactivity measurement laboratories involved in environmental radiation monitoring plans. One of them is the definition of the detection limits to be achieved for the radionuclides analysis in different samples. The detection limits should be set in such a way that the obtained concentration values for each radionuclide are easily discriminated from certain maximum activity concentration levels. These maximum activity concentration levels are usually set in view of the respective dose contributions from each radionuclide. There are some national legislations that settle detection limits for drinking water. However, there is no regulation containing detection limits for groundwater or surface water. In this way, different institutions or companies require very different detection limits for radioactivity concentration assessment in those types of water associated with D&D activities. In this work, we focus on the detection limits required for the D&D activities in rainwater, surface water and groundwater. We propose detection limits obtained by applying the WHO methodology for maximum activity concentration levels and compare with those requested by radioactive waste management agencies and regulatory bodies. Some real cases where our proposal allows identification of events are analysed and conclusions are extracted. [ABSTRACT FROM AUTHOR]

Within the INSIDER project, the WP5 (in situ measurements) has been tasked with analysing the existing systems and methodologies for carrying out these types of measurements in constrained environments, aiming to classify and categorise these environments. An additional task is to organise the participation in in situ intercomparison exercises in real situations, defining the most suitable equipment to carry these out. This paper presents the activities of the WP5 and a summary of the main results obtained in these activities after the first two years of work.

Today, the measurement of 14C in environmental samples is of particular interest, as it enables the assessment of the impact caused by nuclear activities and the fossil fuel industry on the environment. In order to assure the quality of 14C measurement results, the strategy to enlarge the validation of three radioanalytical methods in environmental samples using liquid scintillation spectrometry—the direct counting of water, bubbling of water and combustion of solids—is presented. Due certain difficulties, such as the lack of quality control materials and the scarcity of proficiency test and intercomparison exercises, especially in solid samples, a set of water and soil samples were prepared for the purpose by tracing them with known quantities of a 14C standard solution at two activity levels. Aliquots were subjected to the corresponding method and their activity concentration was calculated. Finally, uncertainty, detection limit, accuracy, precision, repeatability and linearity were analysed. The acceptance criteria for the quality parameters were previously established according to ISO 13528:2015 standard and Eurachem Laboratory Guide to Method Validation. In all the methods, the studied parameters fall within the acceptance range, so they are validated. The quality of the results in real samples is controlled through field validation. [ABSTRACT FROM AUTHOR]

In the context of the INSIDER European project, the suitability of existing methodologies for in-situ measurements under constraint environments in nuclear facilities following a decommissioning and dismantling (D&D) process was analysed. Firstly, an analysis of the different methodologies for in-situ measurements was made along with a study of the different types of constrained environments that could appear in the D&D process as well as their expected level of impact on the measurement methodologies. Based on this analysis, a decision-helping tool for the selection of the suitable in-situ equipment/detector to be used in nuclear facilities for the different phases in any D&D process has been developed, depending on the constrained environment. This tool is named INSPECT, acronym for In-Situ Probe SelECtion Tool. The software is therefore potentially of use to those working in radiological characterization with in-situ instrumentation in any radiological or nuclear D&D process. [ABSTRACT FROM AUTHOR]

In this work, two Tc radiochemical isolation methods—a conventional method by Triskem TEVA® resin and a rapid method by Empore™ Tc Rad Disk—are compared in the field of nuclear decommissioning and 99Tc assessment. The conventional method results more selective than the rapid one, being able to remove almost 100% of the main radiological interferers with the exception of the 90Y; however, the rapid method obtains higher chemical yields (97% vs. 80%) and slightly lower detection limits (0.025 Bq vs. 0.030 Bq) than the conventional. Both methods are similar with regards to equipment and reagent costs. [ABSTRACT FROM AUTHOR]

Within the INSIDER project, the WP5 (in situ measurements) has been tasked with analysing the existing systems and methodologies for carrying out these types of measurements in constrained environments, aiming to classify and categorise these environments. An additional task is to organise the participation in in situ intercomparison exercises in real situations, defining the most suitable equipment to carry these out. This paper presents the activities of the WP5 and a summary of the main results obtained in these activities after the first two years of work. [ABSTRACT FROM AUTHOR]

Lost wax casting is an industrial process which permits the transmutation into metal of models made in wax. The wax model is covered with a silicaceous shell of the required thickness and once this shell is built the set is heated and wax melted. Liquid metal is then cast into the shell replacing the wax. When the metal is cool, the shell is broken away in order to recover the metallic piece. In this process zircon sands are used for the preparation of the silicaceous shell. These sands have varying concentrations of natural radionuclides: 238U, 232Th and 235U together with their progenics. The zircon sand is distributed in bags of 50 kg, and 30 bags are on a pallet, weighing 1,500 kg. The pallets with the bags have dimensions 80 cm × 120 cm × 80 cm, and constitute the radiation source in this case. The only pathway of exposure to workers in the store house is external radiation. In this case there is no dust because the bags are closed and covered by plastic, the store house has a good ventilation rate and so radon accumulation is not possible. The workers do not touch with their hands the bags and consequently skin contamination will not take place. In this study all situations of external irradiation to the workers have been considered; transportation of the pallets from vehicle to store house, lifting the pallets to the shelf, resting of the stock on the shelf, getting down the pallets, and carrying the pallets to production area. Using MCNP-4C exposure situations have been simulated, considering that the source has a homogeneous composition, the minimum stock in the store house is constituted by 7 pallets, and the several distances between pallets and workers when they are at work. The photons flux obtained by MCNP-4C is multiplied by the conversion factor of Flux to Kerma for air by conversion factor to Effective Dose by Kerma unit, and by the number of emitted photons. Those conversion factors are obtained of ICRP 74 table 1 and table 17 respectively. This is the way to obtain a function giving dose rate around the source. [ABSTRACT FROM AUTHOR]

The aim of this paper is to statistically characterize gross beta activity concentrations in ground-level air in Bilbao (northern Spain) by analysing five years (2014–2018) worth of weekly measurements in aerosols collected in filters to analyse the impact of local meteorological parameters on concentrations. In addition, synoptic meteorological scenarios associated with anomalous beta surface activity concentrations were identified. Over this five-year period, beta activity concentrations ranged from 35.45 µBq/m3 to 1778 µBq/m3 with a mean of 520.12 ± 281.77 µBq/m3. A positive correlation was found with the alpha concentrations (0.67), with an average of 0.138 for the alpha/beta ratio, and a low correlation was found with 7Be (0.16). Statistical analysis identified a seasonal component in the time series, increasing, on average, beta activity concentrations from winter to autumn. The highest beta activity concentrations were measured under the arrival of southerly land winds with low wind speeds, while the wind analysis (surface winds and air masses) of two different seasonal periods (autumn 2015 and winter 2017) have highlighted how small variations in synoptic and local winds highly influence beta activity concentrations. These results are relevant to understand the meteorological factors affecting beta activity concentrations in this area and hence to define meteorological scenarios that are in favour to high/anomalous surface activity concentrations that are harmful to the environmental and public health. [ABSTRACT FROM AUTHOR]

This work presents the analysis of weekly 7Be activity concentrations in the air measured in Bilbao (northern Spain) by collecting aerosols in filters over a ten years period (2009–2018). 7Be level is in the 0.35–7.3 mBq/m3 range, with a mean of 3.20 ± 1.12 mBq/m3. The trend, cycle, seasonal and monthly variability are evaluated using time series analysis techniques. The results indicate the impact of sunspots (24th solar cycle) on interannual 7Be activity concentrations, and a significant seasonal and monthly variation, with maximum concentrations occurring in spring-summer and minimum in the winter. The correlation of different 7Be ranges with local meteorological parameters, such as precipitation, temperature, relative humidity, and pressure, is also addressed, with precipitation having the greatest impact on 7Be activity values. The analysis of synoptic airflows, by calculating the back-trajectory clusters, and local winds at surface level reveals the important influence of the arrival of slow northwest Atlantic flows and the development of breezes on reaching high 7Be activity concentrations in this area. [ABSTRACT FROM AUTHOR]